This commit was manufactured by cvs2svn to create tag

'dynamic_linking_works'.

CVSROOT/checkoutlist

@@ -1,13 +0,0 @@
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-#	[<whitespace>]<filename>[<whitespace><error message>]<end-of-line>
-#
-# comment lines begin with '#'

CVSROOT/commitinfo

@@ -1,15 +0,0 @@
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list 
-# of files to check.  A non-zero exit of the filter program will 
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

@@ -1,21 +0,0 @@
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOEFWUPCGMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOEFWUPCGMAR
-
-# Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg
-# script to change the log message.  Set it to `stat' to force CVS to verify# that the file has changed before reading it (this can take up to an extra
-# second per directory being committed, so it is not recommended for large
-# repositories.  Set it to `never' (the previous CVS behavior) to prevent
-# verifymsg scripts from changing the log message.
-#RereadLogAfterVerify=always

CVSROOT/cvswrappers

@@ -1,19 +0,0 @@
-# This file affects handling of files based on their names.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-#  wildcard	[option value][option value]...
-#
-#  where option is one of
-#  -f		from cvs filter		value: path to filter
-#  -t		to cvs filter		value: path to filter
-#  -m		update methodology	value: MERGE or COPY
-#  -k		expansion mode		value: b, o, kkv, &c
-#
-#  and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'

CVSROOT/editinfo

@@ -1,21 +0,0 @@
-# The "editinfo" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

CVSROOT/loginfo

@@ -1,27 +0,0 @@
-# The "loginfo" file controls where "cvs commit" log information
-# is sent.  The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT.  If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter.  The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators.  The format
-# characters are:
-#
-#   s = file name
-#   V = old version number (pre-checkin)
-#   v = new version number (post-checkin)
-#   t = tag or branch name
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

CVSROOT/modules

@@ -1,26 +0,0 @@
-# Three different line formats are valid:
-#	key	-a    aliases...
-#	key [options] directory
-#	key [options] directory files...
-#
-# Where "options" are composed of:
-#	-i prog		Run "prog" on "cvs commit" from top-level of module.
-#	-o prog		Run "prog" on "cvs checkout" of module.
-#	-e prog		Run "prog" on "cvs export" of module.
-#	-t prog		Run "prog" on "cvs rtag" of module.
-#	-u prog		Run "prog" on "cvs update" of module.
-#	-d dir		Place module in directory "dir" instead of module name.
-#	-l		Top-level directory only -- do not recurse.
-#
-# NOTE:  If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias.  An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module.  This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.

CVSROOT/notify

@@ -1,12 +0,0 @@
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT.  If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail -s "CVS notification" %s

CVSROOT/rcsinfo

@@ -1,13 +0,0 @@
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT.  For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

@@ -1,20 +0,0 @@
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4->  file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT.  For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

@@ -1,21 +0,0 @@
-# The "verifymsg" file is used to allow verification of logging
-# information.  It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure.  Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-#   Making sure that the entered bug-id number is correct.
-#   Validating that the code that was reviewed is indeed the code being
-#       checked in (using the bug-id number or a seperate review
-#       number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported.  There can be only one entry that matches a given
-# repository.

smmapd_prototype/Cache.py

@@ -1,37 +0,0 @@
-import threading
-import time
-
-from Logging import *
-
-
-
-class Cache(object):
-    def __init__(self, expiration):
-        self.lock = threading.Lock()
-        self.expiration = expiration
-        self.cache = {}
-
-    def put(self, key, value):
-        self.lock.acquire()
-        self.cache[key] = (time.time(), value)
-        debug("cache.put(%s, %s)" % (str(key), str(value)))
-        self.lock.release()
-
-    def get(self, key):
-        try:
-            self.lock.acquire()
-            debug("cache.get(%s)" % str(key))
-            try:
-                timestamp, value = self.cache[key]
-                debug("cache.get found: %s" % value)
-                if (timestamp + self.expiration) < time.time():
-                    debug("cache.get: expired")
-                    del self.cache[key]
-                    raise KeyError
-                return value
-            except KeyError:
-                debug("cache.get: found nothing")
-                return None
-        finally:
-            self.lock.release()
-

smmapd_prototype/CyrusChecker.py

@@ -1,27 +0,0 @@
-from Logging import *
-
-from SendmailSocketMapHandler import smmapBaseHandlerWorker
-from SendmailSocketMapHandler import smmapBaseHandlerContainer
-from SendmailSocketMapHandler import MyPermanentVerifierException
-from SendmailSocketMapHandler import MyTemporaryVerifierException
-
-from VerifierHandler import MySMTP
-
-class MyLMTP(MySMTP):
-    def lhlo(self, param):
-        return self.docmd("lhlo " + param)
-
-class CyrusCheckerWorker(smmapBaseHandlerWorker):
-    OK = "OK"
-    NOK = "NOK"
-    TEMPNOK = "TEMPNOK"
-
-    def execute(self, data):
-        debug("data " + data)
-
-        host, address = data.split('|')
-
-        debug("host: (%s), address: (%s)" % (host, address))
-        
-        return "<OK>"
-    

smmapd_prototype/Logging.py

@@ -1,14 +0,0 @@
-import syslog
-
-
-config = None
-
-def log(data):
-    syslog.syslog(syslog.LOG_INFO, data)
-
-def debug(data):
-    syslog.syslog(syslog.LOG_DEBUG, data)
-
-def openlog(c):
-    config = c
-    syslog.openlog(config.get('Logging', 'ApplID'), syslog.LOG_PID, syslog.LOG_MAIL)

smmapd_prototype/MANIFEST

@@ -1,8 +0,0 @@
-Cache.py
-Logging.py
-SendmailSocketMapHandler.py
-VerifierHandler.py
-setup.py
-smmapd
-smmapd.ini
-verifysender.m4

smmapd_prototype/SendmailSocketMapHandler.py

@@ -1,190 +0,0 @@
-import SocketServer
-import time
-
-from Logging import *
-
-
-class NetStringError(ValueError): pass
-
-def NetStringDecode(s):
-    try:
-        length, data = s.split(':')
-    except ValueError:
-        raise NetStringError, "Separator not found"
-    try:
-        length = int(length)
-    except ValueError:
-        raise NetStringError, "Can not read length"
-    if len(data) != length+1:
-        raise NetStringError, "Data has unexpected length"
-    if data[-1] != ',':
-        raise NetStringError, "End-delimiter not found"
-    return data[:-1]
-
-def NetStringEncode(s):
-    return str(len(s)) + ":" + s + ","
-
-
-class MyPermanentVerifierException(ValueError): pass
-
-class MyTemporaryVerifierException(ValueError): pass
-
-class MyBaseRequestHandler(SocketServer.BaseRequestHandler):
-    def handle(self):
-        debug("Connected from " + str(self.client_address))
-        self.localSetup()
-        while 1:
-            receivedData = self.request.recv(8192)
-            if (receivedData == None) or (len(receivedData) == 0): break
-            debug("Data: (%s)" % receivedData)
-            self.request.sendall(self.process(receivedData))
-        self.request.close();
-        self.localFinish()
-        debug("Disconnected")
-
-    def process(self, data):
-        debug("MyBaseRequestHandler.process")
-        return data
-
-    def localSetup(self): pass
-
-    def localfinish(self): pass
-
-
-class SendmailAdaptor:
-    PERM = "PERM "
-    OK = "OK "
-    NOTFOUND = "NOTFOUND "
-    TEMP = "TEMP "
-
-    def preProcess(self, data):
-        try:
-            data = NetStringDecode(data)
-            klass, data = data.split(' ')
-            return klass, data
-        except NetStringError, arg:
-            raise MyPermanentVerifierException, arg
-        except ValueError:
-            raise MyPermanentVerifierException, "<class> <data> expected, only one found"
-
-    def postProcess(self, data):
-        return NetStringEncode(data)
-
-    def process(self, data):
-        startTime = time.time()
-        try:
-            klass, data2 = self.preProcess(data)
-            arg = self.execute(klass, data2)
-            code = SendmailAdaptor.OK
-        except MyPermanentVerifierException, arg:
-            code, arg = SendmailAdaptor.PERM, str(arg)
-        except MyTemporaryVerifierException, arg:
-            code, arg = SendmailAdaptor.TEMP, str(arg)
-        endTime = time.time()
-        log("Class: %s, Data: %s, Code: %s, Arg: %s, Delay: %f" % (klass, data2, code, arg, endTime-startTime))
-        return self.postProcess(code + arg)
-
-    def execute(self, data):
-        return data
-
-class NullAdaptor(SendmailAdaptor):
-    def preProcess(self, data):
-        return re.compile(r'^(.*?)[\r\n]{1,2}$').match(data).group(1)
-
-    def postProcess(self, data):
-        return data + "\n"
-
-
-class SendmailDispatcher(SendmailAdaptor, MyBaseRequestHandler):
-    pluginContainerObjects = {}
-    
-
-    def registerAll(config):
-        for section in config.get('Daemon', 'Plugins').split(','):
-            SendmailDispatcher.register(section, config)
-
-    registerAll = staticmethod(registerAll)
-    
-
-    def register(section, config):
-        cfg = Config(section, config)
-        className = cfg.get('ContainerClass')
-        moduleName = cfg.get('ContainerModule')
-        if className == None:
-            className = 'smmapBaseHandlerContainer'
-        else:
-            if moduleName == None:
-                moduleName == className
-            m = __import__(moduleName)
-        log("Registering %s, %s" % (section, className))
-        klass = eval("m.%s" % className)
-        containerObject = klass(cfg)
-        containerObject.setup()
-        SendmailDispatcher.pluginContainerObjects[section] = containerObject
-
-    register = staticmethod(register)
-
-
-    def localSetup(self):
-        self.pluginWorkerObjects = {}
-
-    def localFinish(self):
-        for o in self.pluginWorkerObjects.values():
-            o.finish()
-
-    def execute(self, klass, data):
-        if not self.pluginContainerObjects.has_key(klass):
-            raise MyPermanentVerifierException, "Class %s not implemented" % klass
-        elif not self.pluginWorkerObjects.has_key(klass):
-            debug("Instantiate worker %s" % klass)
-            self.pluginWorkerObjects[klass] = self.pluginContainerObjects[klass].getWorker()
-
-        return self.pluginWorkerObjects[klass].execute(data)
-    
-
-class Config(object):
-    def __init__(self, section, config):
-        self.section = section
-        self.config = config
-
-    def getSection(self):
-        return self.section
-
-    def get(self, item):
-        return self.config.get(self.section, item)
-    
-
-class smmapBaseHandlerWorker(object):
-    def __init__(self, container):
-        self.container = container
-
-    def setup(self): pass
-
-    def finish(self): pass
-
-    def execute(self, data):
-        raise NotImplementedError
-
-class smmapBaseHandlerContainer(object):
-    def __init__(self, cfg):
-        self.config = cfg
-        workerClassName = cfg.get('WorkerClass')
-        workerModuleName = cfg.get('WorkerModule')
-        if workerModuleName == None:
-            workerModuleName = workerClassName
-        m = __import__(workerModuleName)
-        self.workerClass = eval("m.%s" % workerClassName)
-
-    def setup(self): pass
-
-    def finish(self): pass
-
-    def getWorker(self):
-        worker = self.workerClass(self)
-        worker.setup()
-        return worker
-
-        
-
-
-

smmapd_prototype/VerifierHandler.py

@@ -1,240 +0,0 @@
-import threading
-import socket
-import Queue
-import re
-import time
-
-#import timeoutsocket
-import DNS
-
-from Logging import *
-
-from Cache import Cache
-
-from SendmailSocketMapHandler import smmapBaseHandlerWorker
-from SendmailSocketMapHandler import smmapBaseHandlerContainer
-from SendmailSocketMapHandler import MyPermanentVerifierException
-from SendmailSocketMapHandler import MyTemporaryVerifierException
-
-
-
-class VerifierHandlerContainer(smmapBaseHandlerContainer):
-    def setup(self):
-        DNS.ParseResolvConf()
-        if self.config.get('EnableCaching').lower() in ('true', 'yes', '1'):
-            debug("enabling cache")
-            self.cache = Cache(int(self.config.get('CacheExpiration')))
-        else:
-            debug("disabling cache")
-            self.cache = None
-        
-
-class VerifierHandlerWorker(smmapBaseHandlerWorker):
-    OK = "OK"
-    NOK = "NOK"
-    TEMPNOK = "TEMPNOK"
-
-    def setup(self):
-        self.zombies = []
-
-    class checker(threading.Thread):
-        def __init__(self, ready, config, host, address):
-            threading.Thread.__init__(self)
-            self.ready = ready
-            self.config = config
-            self.host = host
-            self.address = address
-            
-        def checkAddressAvailability(self):
-            try:
-                debug("Trying " + self.host)
-                s = MySMTP(self.host, float(self.config.get('SMTPTimeOut')))
-                s.helo(self.config.get('SMTPHeloParam'))
-                s.mail(self.config.get('SMTPCheckSender'))
-                s.rcpt(self.address.getAddress())
-                s.quit()
-                result = VerifierHandlerWorker.OK
-            except MySMTPTemporaryException:
-                result = VerifierHandlerWorker.TEMPNOK
-            except MySMTPPermanentException:
-                result = VerifierHandlerWorker.NOK
-            except socket.timeout:
-                result = VerifierHandlerWorker.TEMPNOK
-            except socket.error:
-                result = VerifierHandlerWorker.TEMPNOK
-            return result
-
-        def run(self):
-            self.result = self.checkAddressAvailability()
-            self.ready.put(self.getName())
-            debug("NOTIFIED Host %s, Result %s" % (self.host, self.result))
-
-        def getResult(self):
-            return self.result
-
-        def getHost(self):
-            return self.host
-
-        def getAddress(self):
-            return self.address
-    
-    def checkAvailability(self, mxes, address):
-        ready = Queue.Queue()
-        checkerThreads = {}
-        for m in mxes:
-            checkerThread = VerifierHandlerWorker.checker(ready, self.container.config, m, address)
-            checkerThread.start()
-            checkerThreads[checkerThread.getName()] = checkerThread
-            
-        result = VerifierHandlerWorker.TEMPNOK
-        while 1:
-            debug("%i threads left" % len(checkerThreads))
-            if len(checkerThreads) == 0:
-                debug("no threads left ...")
-                break
-            if result != VerifierHandlerWorker.TEMPNOK:
-                debug("got a permanent result ...")
-                break
-            debug("Waiting for results ...")
-            name = ready.get()
-            checkerThread = checkerThreads[name]
-            checkerThread.join()
-            tempResult = checkerThread.getResult()
-            debug("success, result is " + str(tempResult))
-            if [VerifierHandlerWorker.OK, VerifierHandlerWorker.NOK].count(tempResult) != 0:
-                result = tempResult
-            del checkerThreads[name]
-        self.zombies.extend(checkerThreads.values())
-        return result
-
-    def finish(self):
-        while 1:
-            debug("finish: %i zombies left" % len(self.zombies))
-            for z in self.zombies:
-                if not z.isAlive():
-                    debug("finish: thread %s for %s, %s terminated" % (z.getName(), z.getHost(), z.getAddress().getAddress()))
-                    self.zombies.remove(z)
-            for z in self.zombies:
-                debug("finish: left over %s for %s, %s" % (z.getName(), z.getHost(), z.getAddress().getAddress()))
-            if len(self.zombies) == 0:
-                debug("finish: no zombie left ...")
-                break
-            debug("finish: WAITING")
-            time.sleep(5)
-            debug("finish: CONTINUE")
-        debug("finish: all threads terminated")
-            
-
-    def execute(self, address):
-        debug("address " + address)
-
-        address = EMailAddress(address)
-
-        bestmxes = address.getBestMX()
-        if not bestmxes:
-            return "<NOK> <no bestmx found>"
-
-        if self.container.cache == None:
-            debug("no caching")
-            result = self.checkAvailability(bestmxes, address)
-        else:
-            result = self.container.cache.get(address.getAddress())
-            if result == None:
-                debug("not found in cache")
-                result = self.checkAvailability(bestmxes, address)
-                if result != VerifierHandlerWorker.TEMPNOK:
-                    self.container.cache.put(address.getAddress(), result)
-            else:
-                debug("found in cache")
-
-        if result == VerifierHandlerWorker.OK:
-            return "<OK>"
-        elif result == VerifierHandlerWorker.NOK:
-            return "<NOK> <home server sent a permanent negative answer>"
-        else:
-            raise MyTemporaryVerifierException, "no mx reachable"
-
-
-class MySMTPPermanentException(ValueError): pass
-
-class MySMTPTemporaryException(ValueError): pass
-
-class MySMTP(object):
-    def __init__(self, host, timeout, port=25):
-        self.host = host
-        self.socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-        self.socket.settimeout(timeout)
-        self.socket.connect((host, port))
-        self.socket.recv(8192)
-        self.resPattern = re.compile(r'[\w\W]*?^(\d{3,3}) (.*?)[\r\n]{1,2}$', re.MULTILINE)
-        
-    def checkResult(self, r):
-        code, text = r
-        code = code / 100
-
-        if code == 2:
-            return;
-        elif code == 4:
-            raise MySMTPTemporaryException, text
-        elif code == 5:
-            raise MySMTPPermanentException, text
-        else:
-            raise MySMTPPermanentException, "unknown code: " + str(code) + ", text: " + str(text)
-
-    def docmd(self, cmd):
-        debug("docmd: %s, cmd: %s " % (self.host, cmd))
-        self.socket.sendall(cmd + "\r\n")
-        res = self.socket.recv(8192)
-        debug("docmd: result: (%s)" % res)
-        m = self.resPattern.match(res)
-        return self.checkResult((int(m.group(1)), m.group(2)))
-        
-    def helo(self, param):
-        return self.docmd("helo " + param)
-
-    def mail(self, sender):
-        if sender[0] != '<' and sender[-1] != '>': sender = '<' + sender + '>'
-        return self.docmd("mail from:" + sender)
-
-    def rcpt(self, recipient):
-        return self.docmd("rcpt to:<%s>" % recipient)
-
-    def quit(self):
-        self.docmd("quit")
-        self.socket.close()
-
-
-class EMailAddress(object):
-    def __init__(self, address):
-        self.address = address
-        if self.address[0] == '<' and self.address[-1] == '>': self.address = self.address[1:-1]
-        try:
-            self.userpart, self.domain = self.address.split('@')
-        except ValueError:
-            raise MyPermanentVerifierException, "excepted email address, found not at-sign"
-
-    def getUserPart(self):
-        return self.userpart
-
-    def getDomain(self):
-        return self.domain
-
-    def getAddress(self):
-        return self.address
-
-    def getBestMX(self):
-        if self.domain[0] == '[' and self.domain[-1] == ']':
-            bestmx2 = [self.domain[1:-1]]
-        else:
-            bestmx = DNS.mxlookup(self.domain)
-            pref = None
-            bestmx2 = []
-            for mx in bestmx:
-                if pref == None: pref = mx[0]
-                if pref == mx[0]:
-                    bestmx2.append(mx[1])
-                else:
-                    break
-        debug("bestmx " + str(bestmx2))
-        return bestmx2
-

smmapd_prototype/index.html

@@ -1,327 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN">
-<html>
-  <head>
-    <title>Sender Address Verifier for Sendmail</title>
-    <meta name="generator" content="emacs-wiki.el">
-    <meta http-equiv="Content-Type"
-	  content="text/html; charset=iso-8859-1">
-    <link rev="made" href="mailto:woho@hottis.de">
-    <link rel="stylesheet" type="text/css" href="/web/default.css" />
-  </head>
-  <body>
-    <h1>Sender Address Verifier for Sendmail</h1>
-    <!-- Page published by Emacs Wiki begins here -->
-<p>
-Author: Wolfgang Hottgenroth <<a href="mailto:woho@hottis.de">woho@hottis.de</a>>, 2004-05-17
-
-</p>
-
-<p>
-This is the prototype of a sender address verifier for sendmail-8.13.
-
-</p>
-
-<p>
-It consists of a m4 file containing a FEATURE to be included in your
-<code>sendmail.mc</code> and a verifier daemon in a bit of python code.
-
-</p>
-
-<p>
-By including the FEATURE in your sendmail.mc file and running the
-verifier daemon, sendmail file verify either
-
-</p>
-
-<ul>
-<li>all sender addresses (with certain exceptions) or
-</li>
-<li>only certain sender addresses
-</li>
-</ul>
-
-<p>
-This will be done by connecting to the best MX servers of the
-particular domain, trying to send a mail to the particular address and
-collect the replies. 
-
-</p>
-
-<p>
-Actually only the <code>HELO</code>, <code>MAIL</code> and <code>RCPT</code> commands are issued.
-
-</p>
-
-<p>
-If a positive reply was found, the mail is considered as valid.
-
-</p>
-
-<p>
-If a permanent negative reply was found, the mail is considered as
-invalid.
-
-</p>
-
-<p>
-If no MX entry was found, the mail is considered as invalid.
-
-</p>
-
-<p>
-If a temporary negative reply was found, the mail is considered as
-temporary invalid.
-
-</p>
-
-<p>
-If there is more than one best MX server all of these servers are
-connected in parallel and the first permanent reply (either positive
-or negative) is returned.
-
-</p>
-
-<h3>Download</h3>
-
-<p>
-The complete sources: <a href="./download/">download</a>
-
-</p>
-
-<p>
-Have a look into the sources: <a href="http://www.hottis.de/cgi-bin/cvsweb.cgi/sender_verifier/">sources</a>
-
-</p>
-
-<h3>Requirements</h3>
-
-<h4>sendmail</h4>
-
-<p>
-sendmail-8.13 is required, since this thing uses the fresh introduced
-socket map.
-
-</p>
-
-<p>
-Find it <a href="http://www.sendmail.org">here</a> on the sendmail homepage.
-
-</p>
-
-<p>
-Your need to build sendmail with support for the socket map. Include 
-
-</p>
-
-<pre class="example">
-APPENDDEF(`confMAPDEF',`-DSOCKETMAP')
-</pre>
-
-<p>
-in your <code>site.config.m4</code>.
-
-</p>
-
-<h4>Python</h4>
-
-<p>
-Python 2.2 or 2.3 is required. If you have Python 2.3 you must delete
-the <code>import timeoutsocket</code> line from <code>verifier.py</code>.
-
-</p>
-
-<p>
-Additionally the python package <code>python-dns</code> is required. Find it
-<a href="http://pydns.sourceforge.net/">http://pydns.sourceforge.net</a>.
-
-</p>
-
-<h3>Configuration of sendmail</h3>
-
-<p>
-Include the FEATURE in your <code>sendmail.mc</code> file. You need to give two
-parameters:
-
-</p>
-
-<pre class="example">
-FEATURE(`verifysender', `mode', `return')
-</pre>
-
-<p>
-For <code>mode</code> you must give either <code>white</code> or <code>black</code>.
-
-</p>
-
-<dl>
-<dt><code>white</code></dt>
-<dd>
-All sender addresses but those mentioned in the whitelist
-file are verified. Complete addresses or just domains can be listed in
-the file. The default location of the whitelist is
-<code>/etc/mail/verify-white-list</code>. If you need a different location,
-define it to <code>confVERIFIER_WHITELIST</code>.
-</dd>
-<dt><code>black</code></dt>
-<dd>
-only addresses or addresses within domains listed in the
-blacklist file are verified. It is obviously only useful to mention
-domains in the blacklist. The default location of the blacklist is
-<code>/etc/mail/verify-black-list</code>. If you need a different location,
-define it to <code>confVERIFIER_BLACKLIST</code>.
-</dd>
-</dl>
-
-<p>
-Both the blacklist and the whitelist file are maps, they must be
-created with <code>makemap</code>. Therefore the entries need a LHS (the address
-or domain) and a RHS. The actual content of the RHS has NO meaning at
-all.
-
-</p>
-
-<p>
-The FEATURE defines a socket map. The default target of the map is
-<code>inet:8884@127.0.0.1</code>, according to the default setting in
-<code>Config.py</code>. If you need something different, define it to
-<code>confVERIFIER_MAP</code>, but don't forget to also adjust <code>Config.py</code>.
-
-</p>
-
-<h3>Configuration of the verification daemon</h3>
-
-<p>
-The configuration of the daemon is done in the file <code>Config.py</code>.
-
-</p>
-
-<p>
-This is the default of this file:
-
-</p>
-
-<pre class="example">
-[Daemon]
-Address: 127.0.0.1
-Port: 8884
-PidFile: smmapd.pid
-Plugins: Verifier,Verifier2
-
-[Logging]
-ApplId: smmapd
-
-[Verifier]
-ContainerModule: VerifierHandler
-ContainerClass: VerifierHandlerContainer
-WorkerModule: VerifierHandler
-WorkerClass: VerifierHandlerWorker
-EnableCaching: 1
-CacheExpiration: 20
-SMTPTimeOut: 20
-SMTPHeloParam: local
-SMTPCheckSender: &lt;&gt;
-
-[Verifier2]
-ContainerModule: VerifierHandler
-ContainerClass: VerifierHandlerContainer
-WorkerModule: VerifierHandler
-WorkerClass: VerifierHandlerWorker
-EnableCaching: 1
-CacheExpiration: 20
-SMTPTimeOut: 20
-SMTPHeloParam: hottis.de
-SMTPCheckSender: &lt;postmaster@hottis.de&gt;</pre>
-
-<p>
-<code>Port</code> and <code>Address</code> are specifying the socket the daemon should
-listen to for communication with sendmail. These settings must be
-reflected in the <code>confVERIFIER_MAP</code> if you change it.
-
-</p>
-
-<p>
-<code>SMTPTimeOut</code> is the timeout for the communication with the MX servers
-when verifying addresses.
-
-</p>
-
-<p>
-<code>SMTPHeloParam</code> is the parameter the verifier will use with the <code>HELO</code>
-command when verifying.
-
-</p>
-
-<p>
-<code>SMTPCheckSender</code> is the sender address used during
-verifications. You should not change it unless you know what you do to
-avoid verification loops.
-
-</p>
-
-<p>
-Since the verification is a time and resource consuming process,
-results can be cached, which is enabled by default. Set
-<code>EnableCaching</code> to 0 to disable it.
-
-</p>
-
-<p>
-<code>CacheExpiration</code> is the time in seconds an entry in the cache is
-considered as valid. It should be much higher.
-
-</p>
-
-<h3>Operation</h3>
-
-<p>
-Configure sendmail and the daemon according to your needs. Start the
-daemon:
-
-</p>
-
-<pre class="example">
-./verifier.py
-</pre>
-
-<h3>Changes</h3>
-
-<ul>
-<li>According to a comment in comp.mail.sendmail I've introduced a class
-  <code>verifier_fix_white</code> in the FEATURE file, currently containing only
-  the string <code>postmaster</code>. Addresses with userpart in this class will
-  never ever be verified to avoid infinite verifying loops.
-</li>
-</ul>
-
-<h4>2004-05-17</h4>
-
-<ul>
-<li>support plugins
-</li>
-<li>separate container and worker object, thereby enable multiple
-  instances of the same plugins
-</li>
-</ul>
-
-
-    <!-- Page published by Emacs Wiki ends here -->
-    <div class="navfoot">
-      <hr>
-      <table width="100%" border="0" summary="Footer navigation">
-	<tr>
-	  <td width="33%" align="left">
-	    <span class="footdate">UPDATED: 2004-05-17</span>
-	  </td>
-	  <td width="34%" align="center">
-	    <span class="foothome">
-	      
-	    </span>
-	  </td>
-	  <td width="33%" align="right">
-	    
-	  </td>
-	</tr>
-      </table>
-    </div>
-  </body>
-</html>

smmapd_prototype/index.wiki

@@ -1,195 +0,0 @@
-#title Sender Address Verifier for Sendmail
-#style /web/default.css
-
-
-Author: Wolfgang Hottgenroth <woho@hottis.de>, 2004-05-17
-
-
-
-
-This is the prototype of a sender address verifier for sendmail-8.13.
-
-It consists of a m4 file containing a FEATURE to be included in your
-=sendmail.mc= and a verifier daemon in a bit of python code.
-
-
-By including the FEATURE in your sendmail.mc file and running the
-verifier daemon, sendmail file verify either
-
-- all sender addresses (with certain exceptions) or
-- only certain sender addresses
-
-This will be done by connecting to the best MX servers of the
-particular domain, trying to send a mail to the particular address and
-collect the replies. 
-
-Actually only the =HELO=, =MAIL= and =RCPT= commands are issued.
-
-If a positive reply was found, the mail is considered as valid.
-
-If a permanent negative reply was found, the mail is considered as
-invalid.
-
-If no MX entry was found, the mail is considered as invalid.
-
-If a temporary negative reply was found, the mail is considered as
-temporary invalid.
-
-If there is more than one best MX server all of these servers are
-connected in parallel and the first permanent reply (either positive
-or negative) is returned.
-
-
-** Download
-
-The complete sources: [[./download/][download]]
-
-Have a look into the sources: [[http://www.hottis.de/cgi-bin/cvsweb.cgi/sender_verifier/][sources]]
-
-
-
-
-** Requirements
-
-*** sendmail
-
-sendmail-8.13 is required, since this thing uses the fresh introduced
-socket map.
-
-Find it [[http://www.sendmail.org][here]] on the sendmail homepage.
-
-Your need to build sendmail with support for the socket map. Include 
-
-<example>
-APPENDDEF(`confMAPDEF',`-DSOCKETMAP')
-</example>
-
-in your =site.config.m4=.
-
-
-*** Python
-
-Python 2.2 or 2.3 is required. If you have Python 2.3 you must delete
-the =import timeoutsocket= line from =verifier.py=.
-
-Additionally the python package =python-dns= is required. Find it
-[[http://pydns.sourceforge.net/][http://pydns.sourceforge.net]].
-
-
-
-** Configuration of sendmail
-
-Include the FEATURE in your =sendmail.mc= file. You need to give two
-parameters:
-
-<example>
-FEATURE(`verifysender', `mode', `return')
-</example>
-
-For =mode= you must give either =white= or =black=.
-
-=white= :: All sender addresses but those mentioned in the whitelist
-file are verified. Complete addresses or just domains can be listed in
-the file. The default location of the whitelist is
-=/etc/mail/verify-white-list=. If you need a different location,
-define it to =confVERIFIER_WHITELIST=.
-
-=black= :: only addresses or addresses within domains listed in the
-blacklist file are verified. It is obviously only useful to mention
-domains in the blacklist. The default location of the blacklist is
-=/etc/mail/verify-black-list=. If you need a different location,
-define it to =confVERIFIER_BLACKLIST=.
-
-Both the blacklist and the whitelist file are maps, they must be
-created with =makemap=. Therefore the entries need a LHS (the address
-or domain) and a RHS. The actual content of the RHS has NO meaning at
-all.
-
-The FEATURE defines a socket map. The default target of the map is
-=inet:8884@127.0.0.1=, according to the default setting in
-=Config.py=. If you need something different, define it to
-=confVERIFIER_MAP=, but don't forget to also adjust =Config.py=.
-
-
-** Configuration of the verification daemon
-
-The configuration of the daemon is done in the file =Config.py=.
-
-This is the default of this file:
-
-<example>
-[Daemon]
-Address: 127.0.0.1
-Port: 8884
-PidFile: smmapd.pid
-Plugins: Verifier,Verifier2
-
-[Logging]
-ApplId: smmapd
-
-[Verifier]
-ContainerModule: VerifierHandler
-ContainerClass: VerifierHandlerContainer
-WorkerModule: VerifierHandler
-WorkerClass: VerifierHandlerWorker
-EnableCaching: 1
-CacheExpiration: 20
-SMTPTimeOut: 20
-SMTPHeloParam: local
-SMTPCheckSender: <>
-
-[Verifier2]
-ContainerModule: VerifierHandler
-ContainerClass: VerifierHandlerContainer
-WorkerModule: VerifierHandler
-WorkerClass: VerifierHandlerWorker
-EnableCaching: 1
-CacheExpiration: 20
-SMTPTimeOut: 20
-SMTPHeloParam: hottis.de
-SMTPCheckSender: <postmaster@hottis.de></example>
-
-=Port= and =Address= are specifying the socket the daemon should
-listen to for communication with sendmail. These settings must be
-reflected in the =confVERIFIER_MAP= if you change it.
-
-=SMTPTimeOut= is the timeout for the communication with the MX servers
-when verifying addresses.
-
-=SMTPHeloParam= is the parameter the verifier will use with the =HELO=
-command when verifying.
-
-=SMTPCheckSender= is the sender address used during
-verifications. You should not change it unless you know what you do to
-avoid verification loops.
-
-Since the verification is a time and resource consuming process,
-results can be cached, which is enabled by default. Set
-=EnableCaching= to 0 to disable it.
-
-=CacheExpiration= is the time in seconds an entry in the cache is
-considered as valid. It should be much higher.
-
-
-** Operation
-
-Configure sendmail and the daemon according to your needs. Start the
-daemon:
-
-<example>
-./verifier.py
-</example>
-
-
-** Changes
-
-- According to a comment in comp.mail.sendmail I've introduced a class
-  =verifier_fix_white= in the FEATURE file, currently containing only
-  the string =postmaster=. Addresses with userpart in this class will
-  never ever be verified to avoid infinite verifying loops.
-
-*** 2004-05-17
-- support plugins
-- separate container and worker object, thereby enable multiple
-  instances of the same plugins
-

smmapd_prototype/setup.py

@@ -1,19 +0,0 @@
-#!/usr/bin/env python
-
-from distutils.core import setup
-
-setup(name="smmapd",
-      version="0.1",
-      description="Framework for sendmail SocketMap handlers",
-      long_description = """
-A framework to build handlers for the sendmail 8.13 SocketMap,
-together with an implementation of a sender-address verifier,
-together we a sendmail m4 feature file""",
-      author="Wolfgang Hottgenroth",
-      author_email="woho@hottis.de",
-      url="http://www.hottis.de/web/verifier/index.html",
-      py_modules = [ 'SendmailSocketMapHandler', 'Cache', 'Logging', 'VerifierHandler' ],
-      scripts = [ 'smmapd' ],
-      data_files = [('config', ['smmapd.ini']),
-                   ('cf/feature', ['verifysender.m4'])]
-     )

smmapd_prototype/smmapd

@@ -1,65 +0,0 @@
-#!/usr/bin/python
-
-import SocketServer
-import socket
-import os
-import ConfigParser
-import getopt
-import sys
-
-from Logging import *
-from SendmailSocketMapHandler import SendmailDispatcher
-
-
-def usage():
-    print "Usage"
-
-
-try:
-    opts, args = getopt.getopt(sys.argv[1:], "hC:F", ["help", "ConfigFile=", "ForeGround"])
-except getopt.GetoptError:
-    usage()
-    sys.exit(2)
-    
-configFile = '/etc/smmapd.ini'
-foreGround = None
-for o, a in opts:
-    if o in ("-h", "--help"):
-        usage()
-        sys.exit()
-    if o in ("-C", "--ConfigFile"):
-        configFile = a
-    if o in ("-F", "--ForeGround"):
-        foreGround = 1
-
-
-
-config = ConfigParser.ConfigParser()
-config.read(configFile)
-
-openlog(config)
-
-if foreGround:
-    pid = 0
-else:
-    pid = os.fork()
-    
-if pid:
-    pidFile = file(config.get('Daemon', 'PidFile'), mode='w')
-    pidFile.write("%i\n" % pid)
-    pidFile.close()
-    print "daemon started with pid ", pid
-else:
-    log("daemon started")
-
-    SendmailDispatcher.registerAll(config)
-
-    try:
-        address = config.get('Daemon', 'Address')
-        port = int(config.get('Daemon', 'Port'))
-        srv = SocketServer.ThreadingTCPServer((address, port), SendmailDispatcher)
-        srv.serve_forever()
-    except socket.error, arg:
-        log("got a socket error: %s" % str(arg))
-    log("daemon died")
-    

smmapd_prototype/smmapd.ini

@@ -1,37 +0,0 @@
-[Daemon]
-Address: 127.0.0.1
-Port: 8884
-PidFile: smmapd.pid
-Plugins: verifier,verifier2,cyrusChecker
-
-[Logging]
-ApplId: smmapd
-
-[verifier]
-ContainerModule: VerifierHandler
-ContainerClass: VerifierHandlerContainer
-WorkerModule: VerifierHandler
-WorkerClass: VerifierHandlerWorker
-EnableCaching: yes
-CacheExpiration: 20
-SMTPTimeOut: 20
-SMTPHeloParam: local
-SMTPCheckSender: <>
-
-[verifier2]
-ContainerModule: VerifierHandler
-ContainerClass: VerifierHandlerContainer
-WorkerModule: VerifierHandler
-WorkerClass: VerifierHandlerWorker
-EnableCaching: yes
-CacheExpiration: 20
-SMTPTimeOut: 20
-SMTPHeloParam: hottis.de
-SMTPCheckSender: <postmaster@hottis.de>
-
-[cyrusChecker]
-ContainerModule: SendmailSocketMapHandler
-ContainerClass: smmapBaseHandlerContainer
-WorkerModule: CyrusChecker
-WorkerClass: CyrusCheckerWorker
-

smmapd_prototype/timeoutsocket.py

@@ -1,424 +0,0 @@
-
-####
-# Copyright 2000,2001 by Timothy O'Malley <timo@alum.mit.edu>
-# 
-#                All Rights Reserved
-# 
-# Permission to use, copy, modify, and distribute this software
-# and its documentation for any purpose and without fee is hereby
-# granted, provided that the above copyright notice appear in all
-# copies and that both that copyright notice and this permission
-# notice appear in supporting documentation, and that the name of
-# Timothy O'Malley  not be used in advertising or publicity
-# pertaining to distribution of the software without specific, written
-# prior permission. 
-# 
-# Timothy O'Malley DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
-# SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-# AND FITNESS, IN NO EVENT SHALL Timothy O'Malley BE LIABLE FOR
-# ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
-# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-# PERFORMANCE OF THIS SOFTWARE. 
-#
-####
-
-"""Timeout Socket
-
-This module enables a timeout mechanism on all TCP connections.  It
-does this by inserting a shim into the socket module.  After this module
-has been imported, all socket creation goes through this shim.  As a
-result, every TCP connection will support a timeout.
-
-The beauty of this method is that it immediately and transparently
-enables the entire python library to support timeouts on TCP sockets.
-As an example, if you wanted to SMTP connections to have a 20 second
-timeout:
-
-    import timeoutsocket
-    import smtplib
-    timeoutsocket.setDefaultSocketTimeout(20)
-
-
-The timeout applies to the socket functions that normally block on
-execution:  read, write, connect, and accept.  If any of these 
-operations exceeds the specified timeout, the exception Timeout
-will be raised.
-
-The default timeout value is set to None.  As a result, importing
-this module does not change the default behavior of a socket.  The
-timeout mechanism only activates when the timeout has been set to
-a numeric value.  (This behavior mimics the behavior of the
-select.select() function.)
-
-This module implements two classes: TimeoutSocket and TimeoutFile.
-
-The TimeoutSocket class defines a socket-like object that attempts to
-avoid the condition where a socket may block indefinitely.  The
-TimeoutSocket class raises a Timeout exception whenever the
-current operation delays too long. 
-
-The TimeoutFile class defines a file-like object that uses the TimeoutSocket
-class.  When the makefile() method of TimeoutSocket is called, it returns
-an instance of a TimeoutFile.
-
-Each of these objects adds two methods to manage the timeout value:
-
-    get_timeout()   -->  returns the timeout of the socket or file
-    set_timeout()   -->  sets the timeout of the socket or file
-
-
-As an example, one might use the timeout feature to create httplib
-connections that will timeout after 30 seconds:
-
-    import timeoutsocket
-    import httplib
-    H = httplib.HTTP("www.python.org")
-    H.sock.set_timeout(30)
-
-Note:  When used in this manner, the connect() routine may still
-block because it happens before the timeout is set.  To avoid
-this, use the 'timeoutsocket.setDefaultSocketTimeout()' function.
-
-Good Luck!
-
-"""
-
-__version__ = "$Revision$"
-__author__  = "Timothy O'Malley <timo@alum.mit.edu>"
-
-#
-# Imports
-#
-import select, string
-import socket
-if not hasattr(socket, "_no_timeoutsocket"):
-    _socket = socket.socket
-else:
-    _socket = socket._no_timeoutsocket
-
-
-#
-# Set up constants to test for Connected and Blocking operations.
-# We delete 'os' and 'errno' to keep our namespace clean(er).
-# Thanks to Alex Martelli and G. Li for the Windows error codes.
-#
-import os
-if os.name == "nt":
-    _IsConnected = ( 10022, 10056 )
-    _ConnectBusy = ( 10035, )
-    _AcceptBusy  = ( 10035, )
-else:
-    import errno
-    _IsConnected = ( errno.EISCONN, )
-    _ConnectBusy = ( errno.EINPROGRESS, errno.EALREADY, errno.EWOULDBLOCK )
-    _AcceptBusy  = ( errno.EAGAIN, errno.EWOULDBLOCK )
-    del errno
-del os
-
-
-#
-# Default timeout value for ALL TimeoutSockets
-#
-_DefaultTimeout = None
-def setDefaultSocketTimeout(timeout):
-    global _DefaultTimeout
-    _DefaultTimeout = timeout
-def getDefaultSocketTimeout():
-    return _DefaultTimeout
-
-#
-# Exceptions for socket errors and timeouts
-#
-Error = socket.error
-class Timeout(Exception):
-    pass
-
-
-#
-# Factory function
-#
-from socket import AF_INET, SOCK_STREAM
-def timeoutsocket(family=AF_INET, type=SOCK_STREAM, proto=None):
-    if family != AF_INET or type != SOCK_STREAM:
-        if proto:
-            return _socket(family, type, proto)
-        else:
-            return _socket(family, type)
-    return TimeoutSocket( _socket(family, type), _DefaultTimeout )
-# end timeoutsocket
-
-#
-# The TimeoutSocket class definition
-#
-class TimeoutSocket:
-    """TimeoutSocket object
-    Implements a socket-like object that raises Timeout whenever
-    an operation takes too long.
-    The definition of 'too long' can be changed using the
-    set_timeout() method.
-    """
-
-    _copies = 0
-    _blocking = 1
-    
-    def __init__(self, sock, timeout):
-        self._sock     = sock
-        self._timeout  = timeout
-    # end __init__
-
-    def __getattr__(self, key):
-        return getattr(self._sock, key)
-    # end __getattr__
-
-    def get_timeout(self):
-        return self._timeout
-    # end set_timeout
-
-    def set_timeout(self, timeout=None):
-        self._timeout = timeout
-    # end set_timeout
-
-    def setblocking(self, blocking):
-        self._blocking = blocking
-        return self._sock.setblocking(blocking)
-    # end set_timeout
-
-    def connect_ex(self, addr):
-        errcode = 0
-        try:
-            self.connect(addr)
-        except Error, why:
-            errcode = why[0]
-        return errcode
-    # end connect_ex
-        
-    def connect(self, addr, port=None, dumbhack=None):
-        # In case we were called as connect(host, port)
-        if port != None:  addr = (addr, port)
-
-        # Shortcuts
-        sock    = self._sock
-        timeout = self._timeout
-        blocking = self._blocking
-
-        # First, make a non-blocking call to connect
-        try:
-            sock.setblocking(0)
-            sock.connect(addr)
-            sock.setblocking(blocking)
-            return
-        except Error, why:
-            # Set the socket's blocking mode back
-            sock.setblocking(blocking)
-            
-            # If we are not blocking, re-raise
-            if not blocking:
-                raise
-            
-            # If we are already connected, then return success.
-            # If we got a genuine error, re-raise it.
-            errcode = why[0]
-            if dumbhack and errcode in _IsConnected:
-                return
-            elif errcode not in _ConnectBusy:
-                raise
-            
-        # Now, wait for the connect to happen
-        # ONLY if dumbhack indicates this is pass number one.
-        #   If select raises an error, we pass it on.
-        #   Is this the right behavior?
-        if not dumbhack:
-            r,w,e = select.select([], [sock], [], timeout)
-            if w:
-                return self.connect(addr, dumbhack=1)
-
-        # If we get here, then we should raise Timeout
-        raise Timeout("Attempted connect to %s timed out." % str(addr) )
-    # end connect
-
-    def accept(self, dumbhack=None):
-        # Shortcuts
-        sock     = self._sock
-        timeout  = self._timeout
-        blocking = self._blocking
-
-        # First, make a non-blocking call to accept
-        #  If we get a valid result, then convert the
-        #  accept'ed socket into a TimeoutSocket.
-        # Be carefult about the blocking mode of ourselves.
-        try:
-            sock.setblocking(0)
-            newsock, addr = sock.accept()
-            sock.setblocking(blocking)
-            timeoutnewsock = self.__class__(newsock, timeout)
-            timeoutnewsock.setblocking(blocking)
-            return (timeoutnewsock, addr)
-        except Error, why:
-            # Set the socket's blocking mode back
-            sock.setblocking(blocking)
-
-            # If we are not supposed to block, then re-raise
-            if not blocking:
-                raise
-            
-            # If we got a genuine error, re-raise it.
-            errcode = why[0]
-            if errcode not in _AcceptBusy:
-                raise
-            
-        # Now, wait for the accept to happen
-        # ONLY if dumbhack indicates this is pass number one.
-        #   If select raises an error, we pass it on.
-        #   Is this the right behavior?
-        if not dumbhack:
-            r,w,e = select.select([sock], [], [], timeout)
-            if r:
-                return self.accept(dumbhack=1)
-
-        # If we get here, then we should raise Timeout
-        raise Timeout("Attempted accept timed out.")
-    # end accept
-
-    def send(self, data, flags=0):
-        sock = self._sock
-        if self._blocking:
-            r,w,e = select.select([],[sock],[], self._timeout)
-            if not w:
-                raise Timeout("Send timed out")
-        return sock.send(data, flags)
-    # end send
-
-    def recv(self, bufsize, flags=0):
-        sock = self._sock
-        if self._blocking:
-            r,w,e = select.select([sock], [], [], self._timeout)
-            if not r:
-                raise Timeout("Recv timed out")
-        return sock.recv(bufsize, flags)
-    # end recv
-
-    def makefile(self, flags="r", bufsize=-1):
-        self._copies = self._copies +1
-        return TimeoutFile(self, flags, bufsize)
-    # end makefile
-
-    def close(self):
-        if self._copies <= 0:
-            self._sock.close()
-        else:
-            self._copies = self._copies -1
-    # end close
-
-# end TimeoutSocket
-
-
-class TimeoutFile:
-    """TimeoutFile object
-    Implements a file-like object on top of TimeoutSocket.
-    """
-    
-    def __init__(self, sock, mode="r", bufsize=4096):
-        self._sock          = sock
-        self._bufsize       = 4096
-        if bufsize > 0: self._bufsize = bufsize
-        if not hasattr(sock, "_inqueue"): self._sock._inqueue = ""
-
-    # end __init__
-
-    def __getattr__(self, key):
-        return getattr(self._sock, key)
-    # end __getattr__
-
-    def close(self):
-        self._sock.close()
-        self._sock = None
-    # end close
-    
-    def write(self, data):
-        self.send(data)
-    # end write
-
-    def read(self, size=-1):
-        _sock = self._sock
-        _bufsize = self._bufsize
-        while 1:
-            datalen = len(_sock._inqueue)
-            if datalen >= size >= 0:
-                break
-            bufsize = _bufsize
-            if size > 0:
-                bufsize = min(bufsize, size - datalen )
-            buf = self.recv(bufsize)
-            if not buf:
-                break
-            _sock._inqueue = _sock._inqueue + buf
-        data = _sock._inqueue
-        _sock._inqueue = ""
-        if size > 0 and datalen > size:
-            _sock._inqueue = data[size:]
-            data = data[:size]
-        return data
-    # end read
-
-    def readline(self, size=-1):
-        _sock = self._sock
-        _bufsize = self._bufsize
-        while 1:
-            idx = string.find(_sock._inqueue, "\n")
-            if idx >= 0:
-                break
-            datalen = len(_sock._inqueue)
-            if datalen >= size >= 0:
-                break
-            bufsize = _bufsize
-            if size > 0:
-                bufsize = min(bufsize, size - datalen )
-            buf = self.recv(bufsize)
-            if not buf:
-                break
-            _sock._inqueue = _sock._inqueue + buf
-
-        data = _sock._inqueue
-        _sock._inqueue = ""
-        if idx >= 0:
-            idx = idx + 1
-            _sock._inqueue = data[idx:]
-            data = data[:idx]
-        elif size > 0 and datalen > size:
-            _sock._inqueue = data[size:]
-            data = data[:size]
-        return data
-    # end readline
-
-    def readlines(self, sizehint=-1):
-        result = []
-        data = self.read()
-        while data:
-            idx = string.find(data, "\n")
-            if idx >= 0:
-                idx = idx + 1
-                result.append( data[:idx] )
-                data = data[idx:]
-            else:
-                result.append( data )
-                data = ""
-        return result
-    # end readlines
-
-    def flush(self):  pass
-
-# end TimeoutFile
-
-
-#
-# Silently replace the socket() builtin function with
-# our timeoutsocket() definition.
-#
-if not hasattr(socket, "_no_timeoutsocket"):
-    socket._no_timeoutsocket = socket.socket
-    socket.socket = timeoutsocket
-del socket
-socket = timeoutsocket
-# Finis

smmapd_prototype/verifysender.m4

@@ -1,110 +0,0 @@
-VERSIONID(`$Id$')
-
-
-
-divert(-1)
-
-define(`_USAGE_', `dnl
-errprint(`*** ERROR: missing argument for FEATURE(verifysender):
-Usage: FEATURE(`verifysender', `_mode_', `_return_')
-  _mode_: black or white
-  _return_: temp or perm
-  found: $1
-')')
-
-ifelse(_ARG_, `black', `', `
-ifelse(_ARG_, `white', `', `
-_USAGE_(`_mode_: ('_ARG_`)
-')
-')')
-
-ifelse(_ARG2_, `temp', `', `
-ifelse(_ARG2_, `perm', `', `
-_USAGE_(`_return_: ('_ARG2_`)
-')
-')')
-
-define(`_mode_', _ARG_)
-define(`_return_', _ARG2_)
-
-errprint(`*** _mode_: '_mode_`
-')
-errprint(`*** _return_: '_return_`
-')
-
-
-define(`_T_DSN_', `4.1.0')
-define(`_T_REPLY', `451')
-ifelse(_return_, `temp', `
-define(`_DSN_', _T_DSN_)
-define(`_REPLY_', _T_REPLY)', `dnl
-define(`_DSN_', `5.1.0')
-define(`_REPLY_', `550')')
-
-ifelse(defn(`confVERIFIER_MAP'), `', `
-define(`_VERIFIER_MAP_', `inet:8884@127.0.0.1')', `
-define(`_VERIFIER_MAP_', confVERIFIER_MAP)')
-
-ifelse(defn(`confVERIFIER_BLACKLIST'), `', `
-define(`_VERIFIER_BLACKLIST_', `/etc/mail/verifier-black-list')', `
-define(`_VERIFIER_BLACKLIST_', confVERIFIER_BLACKLIST)')
-
-ifelse(defn(`confVERIFIER_WHITELIST'), `', `
-define(`_VERIFIER_WHITELIST_', `/etc/mail/verifier-white-list')', `
-define(`_VERIFIER_WHITELIST_', confVERIFIER_WHITELIST)')
-
-divert(0)
-
-LOCAL_CONFIG
-# Adjust the port
-Kverifier socket -T<temp> _VERIFIER_MAP_
-ifelse(_mode_, `white', `dnl
-Kverifier_helper hash -o _VERIFIER_WHITELIST_', `dnl
-Kverifier_helper hash _VERIFIER_BLACKLIST_')
-C{verifier_fix_white} postmaster
-
-LOCAL_RULESETS
-# This ruleset can be used to test the verifier in -bt mode
-Svt
-R$+					$: < $(verifier $1 $:none $) >
-
-Sverifier0
-R< $={verifier_fix_white} @ $+ >	$@ < ok >
-R< $+ @ $+ >				$: < $2 > < $(verifier_helper $1 @ $2 $: $) >
-R< $+ > <  >				$: < $(verifier_helper $1 $: $) >
-ifelse(_mode_, `white', `dnl
-dnl if we found nothing in the whitelist, we continue with checking
-R<  >					$@ < cont >
-dnl if we found something in the whitelist, we skip further verifications
-R< $+ >					$@ < ok >', `dnl
-dnl if we found nothing in the blacklist, we skip further verifications
-R<  >					$@ < ok >
-dnl if we found something in the blacklist, we continue with checking
-R< $+ >					$@ < cont >')
-
-Sverifier1
-R< $+ >					$: < $(verifier $1 $:none $) >
-R< $* < temp > >			$#error $@ _T_DSN_ $: "_T_REPLY_ Sender Address could currently not be verified (1)"
-R< none >				$#error $@ _T_DSN_ $: "_T_REPLY_ Sender Address could currently not be verified (2)"
-R< <OK> $* >				$@ < ok >
-R< <NOK> < $* > >			$#error $@ _DSN_ $: "_REPLY_ Sender Address was verified as bad: " $1
-R< <TNOK> < $* > >			$#error $@ _T_DSN_ $: "_T_REPLY_ Sender Address could currently not be verified (3): " $1
-dnl if we get here, some is wrong with our code
-R$*					$#error $@ 4.7.1 $: "451 Local configuration error <sv1>"
-
-
-SLocal_check_mail
-dnl MAILER-DAEMON address must not be verified
-R<>					$@ <>
-dnl try to focus
-R$+					$: <> $>3 $1
-R<> $+ < @ $+ . >			$: < $1 @ $2 >
-R<> $+ < @ $+ >				$: < $1 @ $2 >
-dnl if unable to focus, rest of check_mail should take care (may be we should reject)
-R<> $*					$@ OK
-R< $+ @ $+ >				$: < $1 @ $2 > $>verifier0 < $1 @ $2 >
-R< $+ @ $+ > < cont >			$: < $1 @ $2 > $>verifier1 < $1 @ $2 >
-R< $+ @ $+ > $# $* 			$# $3
-R< $+ @ $+ > < ok >			$@ OK
-dnl if we get here, some is wrong with our code
-R$*					$#error $@ 4.7.1 $: "451 Local configuration error <sv2>"

smmapdfw/AUTHORS

@@ -0,0 +1 @@
+#AUTHOR# <#EMAIL#>

smmapdfw/COPYING

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

smmapdfw/Makefile

@@ -1,89 +0,0 @@
-PLUGINS = test_workers.so verify_worker.so cyrus_worker.so lua_worker.so
-PREFIX ?= /opt/smmapdfw
-OWNER = mail
-GROUP = mail
-
-COMMON_CFLAGS = -g -I./include
-COMMON_LDFLAGS = -g
-OS = $(shell uname)
-RELEASE_ID = $(shell ./extract_release_id)
-
-
-ifeq ($(OS), FreeBSD)
-BDB_INC ?= /usr/local/include/db41
-BDB_LIB ?=
-CFLAGS = $(COMMON_CFLAGS) -DFREEBSD -D_THREAD_SAFE -I$(BDB_INC)
-LDFLAGS = $(COMMON_LDFLAGS) -pthread
-SHARED = -shared
-endif
-
-ifeq ($(OS), Linux)
-BDB_INC ?= /usr/include
-BDB_LIB ?= /usr/lib/libdb.a
-LUA_INC ?= /usr/include/lua50
-LUA_LIB ?= /usr/lib/liblualib50.a /usr/lib/liblua50.a
-CFLAGS = $(COMMON_CFLAGS) -DLINUX  -I$(BDB_INC) -I$(LUA_INC)
-LDFLAGS = $(COMMON_LDFLAGS) -lresolv -pthread -ldl -lm
-SHARED = -shared
-endif
-
-ifeq ($(OS), SunOS)
-BDB_INC ?= /prod/BrklyDB4/current/include
-BDB_LIB ?= /prod/BrklyDB4/current/lib/libdb.a
-CFLAGS = $(COMMON_CFLAGS) -DSUNOS -D_REENTRANT -I$(BDB_INC)
-LDFLAGS = $(COMMON_LDFLAGS) -lresolv -lpthread -ldl -lsocket -lnsl
-SHARED = -G
-endif
-
-
-
-CC = gcc
-AR = ar
-INSTALL = install
-
-all:	smmapd $(PLUGINS)
-
-smmapd:	smmapd.o containers.o config.o libsmmapdfw.a
-	$(CC) $(LDFLAGS) -o $@ $^
-
-test_workers.so:	test_workers.o libsmmapdfw.a
-	$(CC) $(LDFLAGS) $(SHARED) -o $@ $^
-
-verify_worker.so:	verify_worker.o libsmmapdfw.a $(BDB_LIB)
-	$(CC) $(LDFLAGS) $(SHARED) -o $@ $^
-
-cyrus_worker.so:	cyrus_worker.o libsmmapdfw.a
-	$(CC) $(LDFLAGS) $(SHARED) -o $@ $^
-
-lua_worker.so:		lua_worker.o libsmmapdfw.a $(LUA_LIB)
-	$(CC) $(LDFLAGS) $(SHARED) -o $@ $^
-
-libsmmapdfw.a:	config_public.o dns.o queue.o smtp.o count.o safe_write.o
-	$(AR) r $@ $^
-
-
-
-install:	all
-	$(INSTALL) -d -g $(GROUP) -o $(OWNER) -m 0755 $(PREFIX) $(PREFIX)/bin $(PREFIX)/lib $(PREFIX)/include $(PREFIX)/etc $(PREFIX)/doc
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 0644 include/*.h $(PREFIX)/include 
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 0644 etc/smmapd.ini $(PREFIX)/etc
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 0755 smmapd $(PREFIX)/bin
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 0644 $(PLUGINS) $(PREFIX)/lib
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 0644 libsmmapdfw.a $(PREFIX)/lib
-	$(INSTALL) -g $(GROUP) -o $(OWNER) -m 0644 doc/README $(PREFIX)/doc
-
-
-clean:
-	-rm -f *.o *.so *.a smmapd
-
-distclean:	clean
-	-rm -r smmapd-$(RELEASE_ID)
-	-rm smmapd-$(RELEASE_ID).tar.gz
-
-tar:
-	mkdir smmapd-$(RELEASE_ID) && \
-	cp *.c *.h *.m4 smmapd.ini Makefile README smmapd-$(RELEASE_ID) && \
-	chmod u+w smmapd-$(RELEASE_ID)/* && \
-	tar -czf smmapd-$(RELEASE_ID).tar.gz smmapd-$(RELEASE_ID)
-
-

smmapdfw/Makefile.am

@@ -0,0 +1,2 @@
+SUBDIRS = libsmmapdfw smmapd verify_worker test_worker cyrus_worker
+

smmapdfw/Makefile.in

@@ -0,0 +1,379 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+BDB_LIBS = @BDB_LIBS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+SUBDIRS = libsmmapdfw smmapd verify_worker test_worker cyrus_worker
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
+Makefile.am Makefile.in NEWS aclocal.m4 config.guess config.h.in \
+config.sub configure configure.ac install-sh ltmain.sh missing \
+mkinstalldirs
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.ac 
+	cd $(srcdir) && $(ACLOCAL)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+config.h: stamp-h
+	@if test ! -f $@; then \
+		rm -f stamp-h; \
+		$(MAKE) stamp-h; \
+	else :; fi
+stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
+	     $(SHELL) ./config.status
+	@echo timestamp > stamp-h 2> /dev/null
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
+	@if test ! -f $@; then \
+		rm -f $(srcdir)/stamp-h.in; \
+		$(MAKE) $(srcdir)/stamp-h.in; \
+	else :; fi
+$(srcdir)/stamp-h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+	-rm -f config.h
+
+maintainer-clean-hdr:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" != "." || dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+all-recursive-am: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile config.h
+all-redirect: all-recursive-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+install-data-recursive uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

smmapdfw/config.h.in

@@ -0,0 +1,172 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* enable verify cache */
+#undef ENABLE_VERIFY_CACHE
+
+/* Define to 1 if you have the <arpa/inet.h> header file. */
+#undef HAVE_ARPA_INET_H
+
+/* Define to 1 if you have the <db.h> header file. */
+#undef HAVE_DB_H
+
+/* Define to 1 if you have the `dlerror' function. */
+#undef HAVE_DLERROR
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the `dlopen' function. */
+#undef HAVE_DLOPEN
+
+/* Define to 1 if you have the `dlsym' function. */
+#undef HAVE_DLSYM
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define to 1 if you have the `inet_ntoa' function. */
+#undef HAVE_INET_NTOA
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `dl' library (-ldl). */
+#undef HAVE_LIBDL
+
+/* Define to 1 if you have the `m' library (-lm). */
+#undef HAVE_LIBM
+
+/* Define to 1 if you have the `nsl' library (-lnsl). */
+#undef HAVE_LIBNSL
+
+/* Define to 1 if you have the `resolv' library (-lresolv). */
+#undef HAVE_LIBRESOLV
+
+/* Define to 1 if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the <netinet/in.h> header file. */
+#undef HAVE_NETINET_IN_H
+
+/* Define to 1 if you have the `select' function. */
+#undef HAVE_SELECT
+
+/* Define to 1 if you have the `socket' function. */
+#undef HAVE_SOCKET
+
+/* Define to 1 if the system has the type `socklen_t'. */
+#undef HAVE_SOCKLEN_T
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strrchr' function. */
+#undef HAVE_STRRCHR
+
+/* Define to 1 if you have the `strtol' function. */
+#undef HAVE_STRTOL
+
+/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `vfork' function. */
+#undef HAVE_VFORK
+
+/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H
+
+/* Define to 1 if `fork' works. */
+#undef HAVE_WORKING_FORK
+
+/* Define to 1 if `vfork' works. */
+#undef HAVE_WORKING_VFORK
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to the type of arg 1 for `select'. */
+#undef SELECT_TYPE_ARG1
+
+/* Define to the type of args 2, 3 and 4 for `select'. */
+#undef SELECT_TYPE_ARG234
+
+/* Define to the type of arg 5 for `select'. */
+#undef SELECT_TYPE_ARG5
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define as `fork' if `vfork' does not work. */
+#undef vfork

smmapdfw/configure.ac

@@ -0,0 +1,168 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+
+AC_INIT(smmapdfw, 0.9, woho@hottis.de)
+AM_INIT_AUTOMAKE(smmapdfw, 0.9)
+AM_MAINTAINER_MODE
+
+AM_CONFIG_HEADER(config.h)
+
+AC_LANG_C
+
+AC_ARG_WITH(bdb-lib-dir,
+            [AC_HELP_STRING(--with-bdb-lib-dir, [
+                            Directory for Berkeley DB library files])],
+            [ case "$withval" in
+                no)
+                  if test "x$ENABLE_VERIFY_CACHE" = "x1"; then  
+                    AC_MSG_ERROR(Need bdb-lib-dir)
+                  fi
+                  ;;
+                yes)
+                  ;;
+                *)
+                  LDFLAGS="$LDFLAGS -L$withval -R$withval"
+                  ;;
+            esac ]
+)
+
+AC_ARG_WITH(bdb-inc-dir,
+            [AC_HELP_STRING(--with-bdb-inc-dir, [
+                            Directory for Berkeley include files])],
+            [ case "$withval" in
+                no)
+                  if test "x$ENABLE_VERIFY_CACHE" = "x1"; then  
+                    AC_MSG_ERROR(Need bdb-inc-dir)
+                  fi
+                  ;;
+                yes)
+                  ;;
+                *)
+                  CPPFLAGS="$CPPFLAGS -I$withval"
+                  ;;
+            esac ]
+)
+
+
+ENABLE_VERIFY_CACHE=1
+dnl AC_ARG_ENABLE(verify-cache, 
+dnl               [AC_HELP_STRING(--enable-verify-cache, [ 
+dnl                               Enables the cache in the verify worker. 
+dnl                               Required a dbm implemenation.
+dnl                               (default=yes)])],
+dnl   if test "x$enableval" = xyes; then ENABLE_VERIFY_CACHE=1; fi
+dnl   if test "x$enableval" = xno;  then ENABLE_VERIFY_CACHE=0; fi
+dnl )
+
+dnl verify_BUILD=
+dnl AC_ARG_ENABLE(verify-worker,
+dnl               [AC_HELP_STRING(--enable-verify-worker, [
+dnl                               Enables the sender address verification worker.
+dnl                               (default=no)])],
+dnl   verify_BUILD=libverify_worker.la
+dnl )
+
+dnl test_BUILD=
+dnl AC_ARG_ENABLE(test-worker,
+dnl               [AC_HELP_STRING(--enable-test-worker, [
+dnl                               Enables the test worker (just an example).
+dnl                               (default=no)])],
+dnl   test_BUILD=libtest_workers.la
+dnl )
+
+dnl cyrus_BUILD=
+dnl AC_ARG_ENABLE(cyrus-worker,
+dnl               [AC_HELP_STRING(--enable-cyrus-worker, [
+dnl                               Enables the cyrus mailbox checker.
+dnl                               (default=no)])],
+dnl   cyrus_BUILD=libcyrus_worker.la
+dnl )
+
+
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_LIBTOOL
+AC_PROG_MAKE_SET
+
+# Checks for libraries.
+AC_CHECK_LIB([dl], [dlopen])
+AC_CHECK_LIB([m], [sin])
+AC_CHECK_LIB([nsl], [gethostbyname])
+AC_CHECK_LIB(pthread, pthread_create, 
+             [ CFLAGS="$CFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS"
+               LIBS="$LIBS -lpthread"],
+             AC_CHECK_LIB(c_r, pthread_create, 
+                          [ CFLAGS="$CFLAGS -pthread -D_THREAD_SAFE" 
+                            LIBS="$LIBS -lc_r"],
+                          [AC_MSG_ERROR([*** we can't go without threads])]
+             )
+)
+
+
+AC_CHECK_LIB([resolv], [inet_aton])
+AC_CHECK_LIB([socket], [connect])
+
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS([arpa/inet.h fcntl.h netinet/in.h stdlib.h string.h strings.h sys/socket.h syslog.h unistd.h dlfcn.h])
+
+AC_CHECK_HEADERS([db.h],
+                 [],
+                 [AC_MSG_ERROR([*** we can't go without Berkeley DB])])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_SIZE_T
+AC_HEADER_TIME
+AC_CHECK_TYPES(socklen_t)
+
+# Checks for library functions.
+AC_FUNC_FORK
+dnl AC_FUNC_MALLOC
+dnl AC_FUNC_REALLOC
+AC_FUNC_SELECT_ARGTYPES
+AC_CHECK_FUNCS([inet_ntoa memset select socket strchr strdup strerror strrchr strtol dlopen dlsym dlerror], [],
+               [AC_MSG_ERROR([*** missing function, we can't go without it])])
+
+
+
+
+if test "x$ENABLE_VERIFY_CACHE" = "x1"; then
+AC_CHECK_LIB([db], [__db_ndbm_open],
+             [ BDB_LIBS="-ldb" ],
+	     AC_CHECK_LIB([db], [__db_ndbm_open_4002],
+                          [ BDB_LIBS="-ldb" ],
+                          AC_CHECK_LIB([db41], [__db_ndbm_open],
+                                       [ BDB_LIBS="-ldb41" ],
+                                       AC_CHECK_LIB([db42], [__db_ndbm_open_4002],
+                                                    [ BDB_LIBS="-ldb42" ],
+                                                    BDB_NOT_FOUND=1
+                                       )
+                          )
+             )
+)
+fi
+
+AC_SUBST(BDB_LIBS)
+
+if test "x$BDB_NOT_FOUND" = "x1"; then
+  echo "*** no db/dbm found, disabling verify cache"
+  ENABLE_VERIFY_CACHE=0
+fi
+
+AC_DEFINE_UNQUOTED(ENABLE_VERIFY_CACHE, ${ENABLE_VERIFY_CACHE}, [enable verify cache])
+
+
+
+
+dnl AC_SUBST(verify_BUILD)
+dnl AC_SUBST(test_BUILD)
+dnl AC_SUBST(cyrus_BUILD)
+
+
+AC_CONFIG_FILES([Makefile libsmmapdfw/Makefile smmapd/Makefile test_worker/Makefile verify_worker/Makefile cyrus_worker/Makefile])
+
+AC_OUTPUT

smmapdfw/cyrus_worker/Makefile.am

@@ -0,0 +1,5 @@
+lib_LTLIBRARIES = libcyrus_worker.la
+libcyrus_worker_la_SOURCES = cyrus_worker.c
+libcyrus_worker_la_LIBADD = ../libsmmapdfw/libsmmapdfw.la
+
+INCLUDES = -I../libsmmapdfw

smmapdfw/cyrus_worker/Makefile.in

@@ -0,0 +1,362 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+BDB_LIBS = @BDB_LIBS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+lib_LTLIBRARIES = libcyrus_worker.la
+libcyrus_worker_la_SOURCES = cyrus_worker.c
+libcyrus_worker_la_LIBADD = ../libsmmapdfw/libsmmapdfw.la
+
+INCLUDES = -I../libsmmapdfw
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES = 
+LTLIBRARIES =  $(lib_LTLIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libcyrus_worker_la_LDFLAGS = 
+libcyrus_worker_la_DEPENDENCIES =  ../libsmmapdfw/libsmmapdfw.la
+libcyrus_worker_la_OBJECTS =  cyrus_worker.lo
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+DEP_FILES =  .deps/cyrus_worker.P
+SOURCES = $(libcyrus_worker_la_SOURCES)
+OBJECTS = $(libcyrus_worker_la_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .obj .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu cyrus_worker/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-libLTLIBRARIES:
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+
+distclean-libLTLIBRARIES:
+
+maintainer-clean-libLTLIBRARIES:
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+	$(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+	-rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.s.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+libcyrus_worker.la: $(libcyrus_worker_la_OBJECTS) $(libcyrus_worker_la_DEPENDENCIES)
+	$(LINK) -rpath $(libdir) $(libcyrus_worker_la_LDFLAGS) $(libcyrus_worker_la_OBJECTS) $(libcyrus_worker_la_LIBADD) $(LIBS)
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = cyrus_worker
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu cyrus_worker/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+	-rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+	@echo '$(COMPILE) -c $<'; \
+	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-cp .deps/$(*F).pp .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm .deps/$(*F).pp
+
+%.lo: %.c
+	@echo '$(LTCOMPILE) -c $<'; \
+	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
+	  < .deps/$(*F).pp > .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-libLTLIBRARIES
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-libLTLIBRARIES
+uninstall: uninstall-am
+all-am: Makefile $(LTLIBRARIES)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+	$(mkinstalldirs)  $(DESTDIR)$(libdir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
+		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+		mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+		clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-libLTLIBRARIES distclean-compile \
+		distclean-libtool distclean-tags distclean-depend \
+		distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
+		maintainer-clean-compile maintainer-clean-libtool \
+		maintainer-clean-tags maintainer-clean-depend \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
+clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
+uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
+distclean-compile clean-compile maintainer-clean-compile \
+mostlyclean-libtool distclean-libtool clean-libtool \
+maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
+distclean-depend clean-depend maintainer-clean-depend info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

smmapdfw/extract_release_id

@@ -1,2 +0,0 @@
-#!/bin/sh
-cat smmapd.c | grep '^#define RELEASE_ID' | awk '{print $3}' | sed 's/\"//g'

smmapdfw/install-sh

@@ -0,0 +1,269 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+#
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS=' 	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

smmapdfw/libsmmapdfw/Makefile.am

@@ -0,0 +1,5 @@
+include_HEADERS=containers_public.h queue.h smtp.h cfg.h count.h safe_write.h sunos_comp.h dns.h smmapd.h
+lib_LTLIBRARIES = libsmmapdfw.la
+libsmmapdfw_la_SOURCES = cfg.c queue.c count.c safe_write.c config_public.c dns.c smtp.c
+
+

smmapdfw/libsmmapdfw/Makefile.in

@@ -0,0 +1,380 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+BDB_LIBS = @BDB_LIBS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+include_HEADERS = containers_public.h queue.h smtp.h cfg.h count.h safe_write.h sunos_comp.h dns.h smmapd.h
+lib_LTLIBRARIES = libsmmapdfw.la
+libsmmapdfw_la_SOURCES = cfg.c queue.c count.c safe_write.c config_public.c dns.c smtp.c
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES = 
+LTLIBRARIES =  $(lib_LTLIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libsmmapdfw_la_LDFLAGS = 
+libsmmapdfw_la_LIBADD = 
+libsmmapdfw_la_OBJECTS =  cfg.lo queue.lo count.lo safe_write.lo \
+config_public.lo dns.lo smtp.lo
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+HEADERS =  $(include_HEADERS)
+
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+DEP_FILES =  .deps/cfg.P .deps/config_public.P .deps/count.P .deps/dns.P \
+.deps/queue.P .deps/safe_write.P .deps/smtp.P
+SOURCES = $(libsmmapdfw_la_SOURCES)
+OBJECTS = $(libsmmapdfw_la_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .obj .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu libsmmapdfw/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-libLTLIBRARIES:
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+
+distclean-libLTLIBRARIES:
+
+maintainer-clean-libLTLIBRARIES:
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+	$(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+	-rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.s.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+libsmmapdfw.la: $(libsmmapdfw_la_OBJECTS) $(libsmmapdfw_la_DEPENDENCIES)
+	$(LINK) -rpath $(libdir) $(libsmmapdfw_la_LDFLAGS) $(libsmmapdfw_la_OBJECTS) $(libsmmapdfw_la_LIBADD) $(LIBS)
+
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
+	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p"; \
+	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	list='$(include_HEADERS)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(includedir)/$$p; \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = libsmmapdfw
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu libsmmapdfw/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+	-rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+	@echo '$(COMPILE) -c $<'; \
+	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-cp .deps/$(*F).pp .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm .deps/$(*F).pp
+
+%.lo: %.c
+	@echo '$(LTCOMPILE) -c $<'; \
+	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
+	  < .deps/$(*F).pp > .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-libLTLIBRARIES
+install-exec: install-exec-am
+
+install-data-am: install-includeHEADERS
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-libLTLIBRARIES uninstall-includeHEADERS
+uninstall: uninstall-am
+all-am: Makefile $(LTLIBRARIES) $(HEADERS)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+	$(mkinstalldirs)  $(DESTDIR)$(libdir) $(DESTDIR)$(includedir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
+		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+		mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+		clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-libLTLIBRARIES distclean-compile \
+		distclean-libtool distclean-tags distclean-depend \
+		distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
+		maintainer-clean-compile maintainer-clean-libtool \
+		maintainer-clean-tags maintainer-clean-depend \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
+clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
+uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
+distclean-compile clean-compile maintainer-clean-compile \
+mostlyclean-libtool distclean-libtool clean-libtool \
+maintainer-clean-libtool uninstall-includeHEADERS \
+install-includeHEADERS tags mostlyclean-tags distclean-tags clean-tags \
+maintainer-clean-tags distdir mostlyclean-depend distclean-depend \
+clean-depend maintainer-clean-depend info-am info dvi-am dvi check \
+check-am installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

smmapdfw/libsmmapdfw/cfg.c

@@ -1,13 +1,23 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <syslog.h>
-
-#include "config.h"
-
-#ifdef SUNOS
-#include "sunos_comp.h"
+#if HAVE_CONFIG_H
+# include "config.h"
 #endif
 
+
+
+#include <stdio.h>
+
+#if STDC_HEADERS
+#include <stdlib.h>
+#endif
+
+#if HAVE_SYSLOG_H
+#include <syslog.h>
+#endif
+
+#include "cfg.h"
+
+#include "sunos_comp.h"
+
 #define LF 10
 
 #define STATE_START 0
@@ -36,7 +46,7 @@ config_section_t *readcfg(char *cfgfile) {
 
   f = fopen(cfgfile, "r");
   if (NULL == f) {
-    syslog(LOG_ERR, "readcfg: unable to open config file");
+    syslog(LOG_ERR, "readcfg: unable to open config file %s", cfgfile);
     return NULL;
   }
 

smmapdfw/libsmmapdfw/config_public.c

@@ -1,5 +1,13 @@
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+
+#if HAVE_STRING_H
 #include <string.h>
-#include "config.h"
+#endif
+
+#include "cfg.h"
 
 char *findcfgl(config_item_t *cfg, char *name) {
   config_item_t *ci;

smmapdfw/libsmmapdfw/containers_public.h

@@ -1,7 +1,7 @@
 #ifndef _CONTAINERS_PUBLIC_H_
 #define _CONTAINERS_PUBLIC_H_
 
-#include "config.h"
+#include "cfg.h"
 
 struct class_descriptor_s {
   char *name;

smmapdfw/libsmmapdfw/sunos_comp.h

@@ -1,10 +1,20 @@
 #ifndef _SUNOS_COMP_H_
 #define _SUNOS_COMP_H_
 
-#define socklen_t size_t
-#define isblank(A) ((A==' ') || (A=='\t'))
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
 
 
+
+#ifndef HAVE_SOCKLEN_T
+#define socklen_t size_t
+#endif
+
+#ifndef isblank
+#define isblank(A) ((A==' ') || (A=='\t'))
+#endif
+
 #endif /* _SUNOS_COMP_H_ */  
 
   

smmapdfw/missing

@@ -0,0 +1,198 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc.
+# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.in; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing - GNU libit 0.0"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`$configure_ac'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`$configure_ac'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`$configure_ac'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0

smmapdfw/mkinstalldirs

@@ -0,0 +1,40 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp"
+
+        mkdir "$pathcomp" || lasterr=$?
+
+        if test ! -d "$pathcomp"; then
+  	  errstatus=$lasterr
+        fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here

smmapdfw/smmapd/Makefile.am

@@ -0,0 +1,9 @@
+noinst_HEADERS = containers.h
+sysconf_DATA = smmapd.ini
+bin_PROGRAMS = smmapd
+smmapd_SOURCES = smmapd.c containers.c
+smmapd_LDADD = ../libsmmapdfw/libsmmapdfw.la
+
+INCLUDES = -I../libsmmapdfw
+CPPFLAGS = -DDEFAULT_SMMAPD_INI=\"$(sysconfdir)/smmapd.ini\" @CPPFLAGS@
+

smmapdfw/smmapd/Makefile.in

@@ -0,0 +1,389 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+BDB_LIBS = @BDB_LIBS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+noinst_HEADERS = containers.h
+sysconf_DATA = smmapd.ini
+bin_PROGRAMS = smmapd
+smmapd_SOURCES = smmapd.c containers.c
+smmapd_LDADD = ../libsmmapdfw/libsmmapdfw.la
+
+INCLUDES = -I../libsmmapdfw
+CPPFLAGS = -DDEFAULT_SMMAPD_INI=\"$(sysconfdir)/smmapd.ini\" @CPPFLAGS@
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES = 
+bin_PROGRAMS =  smmapd$(EXEEXT)
+PROGRAMS =  $(bin_PROGRAMS)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+smmapd_OBJECTS =  smmapd.$(OBJEXT) containers.$(OBJEXT)
+smmapd_DEPENDENCIES =  ../libsmmapdfw/libsmmapdfw.la
+smmapd_LDFLAGS = 
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DATA =  $(sysconf_DATA)
+
+HEADERS =  $(noinst_HEADERS)
+
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+DEP_FILES =  .deps/containers.P .deps/smmapd.P
+SOURCES = $(smmapd_SOURCES)
+OBJECTS = $(smmapd_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .obj .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu smmapd/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-binPROGRAMS:
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+distclean-binPROGRAMS:
+
+maintainer-clean-binPROGRAMS:
+
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+	done
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+	$(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+	-rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.s.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+smmapd$(EXEEXT): $(smmapd_OBJECTS) $(smmapd_DEPENDENCIES)
+	@rm -f smmapd$(EXEEXT)
+	$(LINK) $(smmapd_LDFLAGS) $(smmapd_OBJECTS) $(smmapd_LDADD) $(LIBS)
+
+install-sysconfDATA: $(sysconf_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(sysconfdir)
+	@list='$(sysconf_DATA)'; for p in $$list; do \
+	  if test -f $(srcdir)/$$p; then \
+	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(sysconfdir)/$$p"; \
+	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(sysconfdir)/$$p; \
+	  else if test -f $$p; then \
+	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(sysconfdir)/$$p"; \
+	    $(INSTALL_DATA) $$p $(DESTDIR)$(sysconfdir)/$$p; \
+	  fi; fi; \
+	done
+
+uninstall-sysconfDATA:
+	@$(NORMAL_UNINSTALL)
+	list='$(sysconf_DATA)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(sysconfdir)/$$p; \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = smmapd
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu smmapd/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+	-rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+	@echo '$(COMPILE) -c $<'; \
+	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-cp .deps/$(*F).pp .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm .deps/$(*F).pp
+
+%.lo: %.c
+	@echo '$(LTCOMPILE) -c $<'; \
+	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
+	  < .deps/$(*F).pp > .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-binPROGRAMS install-sysconfDATA
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-binPROGRAMS uninstall-sysconfDATA
+uninstall: uninstall-am
+all-am: Makefile $(PROGRAMS) $(DATA) $(HEADERS)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(sysconfdir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-binPROGRAMS mostlyclean-compile \
+		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+		mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-binPROGRAMS clean-compile clean-libtool clean-tags \
+		clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-binPROGRAMS distclean-compile distclean-libtool \
+		distclean-tags distclean-depend distclean-generic \
+		clean-am
+	-rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-binPROGRAMS \
+		maintainer-clean-compile maintainer-clean-libtool \
+		maintainer-clean-tags maintainer-clean-depend \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
+maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool uninstall-sysconfDATA \
+install-sysconfDATA tags mostlyclean-tags distclean-tags clean-tags \
+maintainer-clean-tags distdir mostlyclean-depend distclean-depend \
+clean-depend maintainer-clean-depend info-am info dvi-am dvi check \
+check-am installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

smmapdfw/smmapd/containers.c

@@ -1,10 +1,25 @@
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#if HAVE_SYSLOG_H
 #include <syslog.h>
+#endif
+
+#if HAVE_STRING_H
 #include <string.h>
+#endif
+
+#if STDC_HEADERS
 #include <stdlib.h>
+#endif
+
+#if HAVE_DLFCN_H
 #include <dlfcn.h>
+#endif
 
 #include "containers.h"
-#include "config.h"
+#include "cfg.h"
 #include "smmapd.h"
 
 
@@ -200,10 +215,6 @@ int register_all() {
   int id = 0;
 
   cfg_plugin_dir = findcfg(cfg, CFG_SECTION_GLOBAL, CFG_NAME_PLUGIN_DIR);
-  if (NULL == cfg_plugin_dir) {
-    syslog(LOG_ERR, "register_all: no plugin dir configured");
-    return -1;
-  }
 
   cfg_plugins = findcfg(cfg, CFG_SECTION_GLOBAL, CFG_NAME_PLUGINS);
   if (NULL == cfg_plugins) {
@@ -221,10 +232,12 @@ int register_all() {
       return -3;
     }
 
-    obj_name = (char*) malloc(strlen(cfg_plugin_dir) + strlen(cfg_obj) + 5);
+    obj_name = (char*) malloc(((cfg_plugin_dir == NULL) ? 0 : strlen(cfg_plugin_dir)) + strlen(cfg_obj) + 5);
     obj_name[0] = '\0';
-    strcat(obj_name, cfg_plugin_dir);
-    strcat(obj_name, "/");
+    if (cfg_plugin_dir != NULL) {
+      strcat(obj_name, cfg_plugin_dir);
+      strcat(obj_name, "/");
+    }
     strcat(obj_name, cfg_obj);
 
     dl_handle = dlopen(obj_name, RTLD_NOW);

smmapdfw/smmapd/smmapd.c

@@ -1,35 +1,58 @@
-#include <stdio.h>
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+
+
+#if HAVE_STRING_H
 #include <string.h>
+#endif
+
+#if STDC_HEADERS
 #include <stdlib.h>
+#endif
+
+#if HAVE_SYSLOG_H
 #include <syslog.h>
+#endif
+
+#if HAVE_SYS_SOCKET_H
 #include <sys/socket.h>
+#endif
+
+#if HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#if HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+
+
 #include <netinet/in.h>
 #include <errno.h>
 #include <pthread.h>
-#include <unistd.h>
-#include <arpa/inet.h>
 #include <assert.h>
+#include <stdio.h>
+
 
 #include "queue.h"
 #include "count.h"
 #include "containers.h"
-#include "config.h"
+#include "cfg.h"
 #include "safe_write.h"
 
 #define _SMMAPD_C_
 #include "smmapd.h"
 
 
-#ifdef SUNOS
 #include "sunos_comp.h"
-#endif
 
 
 #define CFG_SECTION_GLOBAL "global"
 #define CFG_NAME_ADDRESS "address"
 #define CFG_NAME_PORT "port"
 
-
 #define DEFAULT_PORT "8888"
 
 #define CVS_ID "$Id$"
@@ -268,8 +291,6 @@ void usage() {
 }
 
 int main(int argc, char **argv) {
-  #define DEFAULT_SMMAPD_INI "smmapd.ini"
-
   int err, pid, do_fork, foreground=0, c;
   char *pid_file=NULL, *cfg_file=NULL;
   

smmapdfw/smmapd/smmapd.ini

@@ -3,19 +3,19 @@ do_fork = 0
 pid_file = smmapd.pid
 address = 127.0.0.1
 port = 8887
-plugin_dir = /home/who/Sources/sf/smmapdfw
+; plugin_dir = /home/who/Sources/sf/smmapdfw
 ; plugins = test_worker1 test_worker2 verifier cyruscheck lua_worker
-plugins = lua_worker
+plugins = verifier
 
 [test_worker1]
-obj = test_workers.so
+obj = libtest_workers.so
 text = test worker1 handle text
 
 [test_worker2]
-obj = test_workers.so
+obj = libtest_workers.so
 
 [verifier]
-obj = verify_worker.so
+obj = libverify_worker.so
 timeout_result = 5
 timeout_dialog = 20
 cache_enabled = 1
@@ -26,14 +26,14 @@ smtp_port = 25
 max_checker_threads = 100
 
 [cyruscheck]
-obj = cyrus_worker.so
+obj = libcyrus_worker.so
 timeout = 10
 sender_address = <testsender>
 lhlo_arg = local
 lmtp_port = 24
 
 [lua_worker]
-obj = lua_worker.so
+obj = liblua_worker.so
 ; load = base string table math loadlib io
 load = base string io
 lua_path = .

smmapdfw/test_worker/Makefile.am

@@ -0,0 +1,5 @@
+lib_LTLIBRARIES = libtest_workers.la
+libtest_workers_la_SOURCES = test_workers.c
+libtest_workers_la_LIBADD = ../libsmmapdfw/libsmmapdfw.la
+
+INCLUDES = -I../libsmmapdfw

smmapdfw/test_worker/Makefile.in

@@ -0,0 +1,362 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+BDB_LIBS = @BDB_LIBS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+lib_LTLIBRARIES = libtest_workers.la
+libtest_workers_la_SOURCES = test_workers.c
+libtest_workers_la_LIBADD = ../libsmmapdfw/libsmmapdfw.la
+
+INCLUDES = -I../libsmmapdfw
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES = 
+LTLIBRARIES =  $(lib_LTLIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libtest_workers_la_LDFLAGS = 
+libtest_workers_la_DEPENDENCIES =  ../libsmmapdfw/libsmmapdfw.la
+libtest_workers_la_OBJECTS =  test_workers.lo
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+DEP_FILES =  .deps/test_workers.P
+SOURCES = $(libtest_workers_la_SOURCES)
+OBJECTS = $(libtest_workers_la_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .obj .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu test_worker/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-libLTLIBRARIES:
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+
+distclean-libLTLIBRARIES:
+
+maintainer-clean-libLTLIBRARIES:
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+	$(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+	-rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.s.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+libtest_workers.la: $(libtest_workers_la_OBJECTS) $(libtest_workers_la_DEPENDENCIES)
+	$(LINK) -rpath $(libdir) $(libtest_workers_la_LDFLAGS) $(libtest_workers_la_OBJECTS) $(libtest_workers_la_LIBADD) $(LIBS)
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = test_worker
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu test_worker/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+	-rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+	@echo '$(COMPILE) -c $<'; \
+	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-cp .deps/$(*F).pp .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm .deps/$(*F).pp
+
+%.lo: %.c
+	@echo '$(LTCOMPILE) -c $<'; \
+	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
+	  < .deps/$(*F).pp > .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-libLTLIBRARIES
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-libLTLIBRARIES
+uninstall: uninstall-am
+all-am: Makefile $(LTLIBRARIES)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+	$(mkinstalldirs)  $(DESTDIR)$(libdir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
+		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+		mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+		clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-libLTLIBRARIES distclean-compile \
+		distclean-libtool distclean-tags distclean-depend \
+		distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
+		maintainer-clean-compile maintainer-clean-libtool \
+		maintainer-clean-tags maintainer-clean-depend \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
+clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
+uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
+distclean-compile clean-compile maintainer-clean-compile \
+mostlyclean-libtool distclean-libtool clean-libtool \
+maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
+distclean-depend clean-depend maintainer-clean-depend info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

smmapdfw/verify_worker/Makefile.am

@@ -0,0 +1,6 @@
+lib_LTLIBRARIES = libverify_worker.la
+libverify_worker_la_SOURCES = verify_worker.c
+libverify_worker_la_LIBADD = ../libsmmapdfw/libsmmapdfw.la @BDB_LIBS@
+
+INCLUDES = -I../libsmmapdfw
+

smmapdfw/verify_worker/Makefile.in

@@ -0,0 +1,362 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+BDB_LIBS = @BDB_LIBS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+lib_LTLIBRARIES = libverify_worker.la
+libverify_worker_la_SOURCES = verify_worker.c
+libverify_worker_la_LIBADD = ../libsmmapdfw/libsmmapdfw.la @BDB_LIBS@
+
+INCLUDES = -I../libsmmapdfw
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES = 
+LTLIBRARIES =  $(lib_LTLIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libverify_worker_la_LDFLAGS = 
+libverify_worker_la_DEPENDENCIES =  ../libsmmapdfw/libsmmapdfw.la
+libverify_worker_la_OBJECTS =  verify_worker.lo
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+DEP_FILES =  .deps/verify_worker.P
+SOURCES = $(libverify_worker_la_SOURCES)
+OBJECTS = $(libverify_worker_la_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .obj .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu verify_worker/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-libLTLIBRARIES:
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+
+distclean-libLTLIBRARIES:
+
+maintainer-clean-libLTLIBRARIES:
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+	$(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+	-rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.s.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+libverify_worker.la: $(libverify_worker_la_OBJECTS) $(libverify_worker_la_DEPENDENCIES)
+	$(LINK) -rpath $(libdir) $(libverify_worker_la_LDFLAGS) $(libverify_worker_la_OBJECTS) $(libverify_worker_la_LIBADD) $(LIBS)
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = verify_worker
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu verify_worker/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+	-rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+	@echo '$(COMPILE) -c $<'; \
+	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-cp .deps/$(*F).pp .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm .deps/$(*F).pp
+
+%.lo: %.c
+	@echo '$(LTCOMPILE) -c $<'; \
+	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
+	  < .deps/$(*F).pp > .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-libLTLIBRARIES
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-libLTLIBRARIES
+uninstall: uninstall-am
+all-am: Makefile $(LTLIBRARIES)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+	$(mkinstalldirs)  $(DESTDIR)$(libdir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
+		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+		mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+		clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-libLTLIBRARIES distclean-compile \
+		distclean-libtool distclean-tags distclean-depend \
+		distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
+		maintainer-clean-compile maintainer-clean-libtool \
+		maintainer-clean-tags maintainer-clean-depend \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
+clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
+uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
+distclean-compile clean-compile maintainer-clean-compile \
+mostlyclean-libtool distclean-libtool clean-libtool \
+maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
+distclean-depend clean-depend maintainer-clean-depend info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

smmapdfw/verify_worker/verify_worker.c

@@ -1,3 +1,9 @@
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+
+
 #include <stdlib.h>
 #include <syslog.h>
 #include <pthread.h>
@@ -8,8 +14,11 @@
 #include <sys/types.h>
 #include <fcntl.h>
 #include <stdio.h>
+
+#if ENABLE_VERIFY_CACHE == 1
 #define DB_DBM_HSEARCH 1
 #include <db.h>
+#endif
 
 #include "containers_public.h"
 #include "smmapd.h"
@@ -252,6 +261,7 @@ int verify_work_destroy(void *handle, void *work_handle) {
 
 
 void cache_insert(verify_container_handle_t *vch, const char *address, int result, const char *output) {
+#if ENABLE_VERIFY_CACHE == 1
   DBM *cache;
   datum data, key;
   int ret;
@@ -282,9 +292,13 @@ void cache_insert(verify_container_handle_t *vch, const char *address, int resul
     
     free(mydata);
   }
+#else
+  syslog(LOG_DEBUG, "cache_insert: cache disabled");
+#endif /* ENABLE_VERIFY_CACHE */
 }
 
 int cache_lookup(verify_container_handle_t *vch, const char* address, int *result, char **output) {
+#if ENABLE_VERIFY_CACHE == 1
   DBM *cache;
   datum data, key;
   mydata_t *mydata;
@@ -335,6 +349,9 @@ int cache_lookup(verify_container_handle_t *vch, const char* address, int *resul
   }
 
   return res;
+#else
+  return -1;
+#endif /* ENABLE_VERIFY_CACHE */
 }