fix2

.gitignore

@@ -1,13 +1,7 @@
 /Release/
-.vscode/
-~*
-*~
-
-# generated files, will be regenerated by CI script
 libraries/includes/configuration.cpp
 libraries/includes/configuration.h
-
-# release targets, will be generated by CI script
+sketch.esp8266.esp8266.nodemcu.bin
+sketch.esp8266.esp8266.nodemcu.elf
 sketch/sketch.esp8266.esp8266.nodemcu.bin
 sketch/sketch.esp8266.esp8266.nodemcu.elf
-

.gitlab-ci.yml

@@ -4,7 +4,7 @@ stages:
 
 build:
         stage: build
-        image: registry.gitlab.com/wolutator/build-env-arduino:latest
+        image: registry.hottis.de/dockerized/build-env-arduino:latest
         tags:
                 - hottis
                 - linux
@@ -15,7 +15,8 @@ build:
                 name: "$CI_JOB_NAME-$CI_COMMIT_REF_NAME"
                 paths:
                         - sketch.esp8266.esp8266.nodemcu.bin
-                        - sketch.esp8266.esp8266.nodemcu.elf
+        except:
+                - tags
         script:
                 - pushd $CI_PROJECT_DIR/libraries/esp8266boilerplate/ConfigGenerator && ./configGen.sh && popd
                 - env ARDUINO_SKETCHBOOK_DIR=$CI_PROJECT_DIR arduino-cli compile --fqbn=esp8266:esp8266:nodemcu $CI_PROJECT_DIR/sketch
@@ -24,7 +25,7 @@ build:
 
 release:
         stage: release
-        image: registry.gitlab.com/wolutator/base-build-env
+        image: registry.hottis.de/dockerized/base-build-env
         tags:
                 - hottis
                 - linux
@@ -32,8 +33,13 @@ release:
         dependencies:
                 - build
         only:
-                - release
+                refs:
+                        - release
         script:
-                - gitlabreleaseuploader.py -p $PRIVATE_TOKEN -i $CI_PROJECT_ID -u $CI_PROJECT_URL
-                  -f sketch.esp8266.esp8266.nodemcu.elf -F releaseInfo.json -T $CI_COMMIT_REF_NAME
+                - gitlabreleaseuploader.py -p $PRIVATE_TOKEN 
+                  -i $CI_PROJECT_ID -u $CI_PROJECT_URL
+                  -f sketch.esp8266.esp8266.nodemcu.bin 
+                  -F releaseInfo.json 
+                  -T $CI_COMMIT_REF_NAME -c
+                  -I $CI_SERVER_URL
 

build.sh

@@ -0,0 +1,36 @@
+#!/bin/bash
+
+if [ "$1" == "" ]; then
+  echo "Give one of the targets: build, clean, upload"
+  echo "If you want to use a project directory different"
+  echo "than the current directory, give it as a second"
+  echo "argument."
+  exit 1
+fi
+
+if [ "$2" != "" ]; then
+  PROJECT_DIR=$2
+else
+  PROJECT_DIR=$PWD
+fi
+
+
+if [ "$1" == "build" ]; then
+  pushd $PROJECT_DIR/libraries/esp8266boilerplate/ConfigGenerator && ./configGen.sh && popd
+  env ARDUINO_SKETCHBOOK_DIR=$PROJECT_DIR arduino-cli compile --fqbn=esp8266:esp8266:nodemcu $PROJECT_DIR/sketch
+  cp sketch/sketch.esp8266.esp8266.nodemcu.* .
+elif [ "$1" == "clean" ]; then
+  for D in libraries/includes/configuration.h libraries/includes/configuration.cpp sketch/sketch.esp8266.esp8266.nodemcu.bin sketch/sketch.esp8266.esp8266.nodemcu.elf sketch.esp8266.esp8266.nodemcu.bin sketch.esp8266.esp8266.nodemcu.elf; do
+    echo -n "About to delete $D ... "
+    rm $PROJECT_DIR/$D && echo "done"
+  done
+elif [ "$1" == "upload" ]; then
+  echo "About to upload to device"
+  esptool.py --port /dev/ttyUSB1 write_flash 0 sketch.esp8266.esp8266.nodemcu.bin
+else
+  echo "Unknown subcommand '$1'"
+  exit 1
+fi
+
+
+

libraries/includes/defines.h

@@ -8,7 +8,7 @@
 #ifndef DEFINES_H_
 #define DEFINES_H_
 
-#define DEBUG
+// #define DEBUG
 
 
 
@@ -41,7 +41,7 @@
 #endif
 #endif
 
-#define NUM_OF_LEDs 16
+#define NUM_OF_LEDs 300
 
 
 #endif /* DEFINES_H_ */

readme.md

@@ -1,4 +1,82 @@
-export ARDUINO_SKETCHBOOK_DIR=~/rgbled
-arduino-cli compile --debug --fqbn=esp8266:esp8266:nodemcu ~/rgbled/sketch
+# RgbLed - A Project and a Sample Project for multiple concepts
+
+## The Project itself
+
+This thing serves as a controller for smart RGB leds like WS2811, WS2812, PL9823 or others. For this purpose it utilizes the Adafruit Neopixel library.
+
+It receives commands via MQTT to send related code sequences to chains of those leds. It supports two commands, which it receives via two MQTT topics it subscribes. 
+
+The simple ``command`` accepts one or two arguments. When only one argument is given, this argument has to be a number between 0 and 255 and is interpreted as brightness. All three colors of all connected leds are driven with that value. When two arguments are given, the first argument is interpreted as the number of the led to drive, starting with 0 and the second argument is again the brightness.
+
+The ``colorCommand`` accepts one, two, three or four arguments. With only one argument, this argument is interpreted as a color word (on or white, off, warmwhite, red, green, blue, purple, yellow). All connected leds will be driven with the given color combination. With two arguments, the first one is the led number, the second one is the color word. Three arguments have to be 8 bit numbers to control the color channels of all connected leds. With four arguments the first argument is the led number, the remaining three are again red, green and blue values.
+
+## Sample Project for ...
+
+### ... a project to be used together with the ``build-env-arduino`` docker image
+
+The ``build-env-arduino`` docker image, which can be loaded using the image name ``registry.gitlab.com/wolutator/build-env-arduino:latest`` is a tinned or preserved build environment for boards supported by the Arduino development system. Currently ``arduino:avr`` and ``esp8266:esp8266`` are supported by this image.
+
+It is maintained in to the project [https://gitlab.com/wolutator/build-env-arduino].
+
+A preserved build environment, which easily can be installed or simply loaded for many developers in exactly the same way and which can easily be archived is a major topic is professional software engineering. If you have a team of lots of developers you don't want to waste time by letting everyone install his or her development environment manually, finally ending up with minor to major differences which makes it hard to compare or integrate software or let one developer investigate a bug another developer found. Furthermore you want to be able, especially in an industrial environment, to pick a development environment from the shelve to investigate and fix an issue reported in a years-old software. Both can be achieved with preserved environments.
+
+This preserved Arduino build environment uses the Arduino CLI tool, which can be found at [https://downloads.arduino.cc/arduino-cli/arduino-cli-latest-linux64.tar.bz2] and which is discussed here [https://blog.arduino.cc/2018/08/24/announcing-the-arduino-command-line-interface-cli/].
+
+This Arduino CLI tool expects your projects to be stored in the common ``sketchbook`` folder, where also the common (used by all projects) ``libraries`` folder is located. This is not my cup of tea. You want my projects separated from each other, together with all dependent libraries.
+
+So, I created the following directory structure of my project repository:
+
+    RepoRoot/
+    |
+    +--- sketch/
+    |    |
+    |    +--- sketch.ino
+    |    +--- application.cpp
+    |    +--- application.h
+    |
+    +--- libraries/
+    |    |
+    |    +--- library1/
+    |    |
+    |    +--- library2/
+    |    |
+    |    +--- includes/   
+    |
+    +--- .gitignore
+    +--- .gitlab-ci.yml
+    +--- readme.md
+
+To make the Arduino CLI use this structure, I point the variable ``ARDUINO_SKETCHBOOK_DIR`` to it, so the commandline to build a project is
+
+    env ARDUINO_SKETCHBOOK_DIR=$PROJECT_DIR arduino-cli compile --fqbn=esp8266:esp8266:nodemcu $PROJECT_DIR/sketch
+
+The Arduino system expects a file with the extension ``.ino`` and same name as the directory within the sketchbook directory. Since in my setup every project lifes in a separate sketchbook directory, I call the directory with the main application sources ``sketch`` and the accordingly the ``ino``-file ``sketch.ino``. This file contain the typical main functions of each Arduino project, which are ``setup`` and ``loop``.
+
+In my projects, I do not put any meaningful code into the ``ino``, I have everything in the companion ``cpp`` file, which is usually ``application.cpp`` (with its friend ``application.h``)
+
+When the Arduino system trys to find some included ``.h`` it has a powerful strategy, which works without any ``CFLAGS`` variable with ``-I`` options. It works just by convention. Thus, it searches in the Arduino core folders, in the ``sketch`` folder itself and in all subfolders of the ``libraries`` folder. For this reason I put a ``includes`` folder into the ``libraries`` folder where I place all header files, which are shared between the main application (the "sketch") and some libraries.
+
+This approach can easily be implemented in a Gitlab CI script:
+
+    build:
+        stage: build
+        image: registry.gitlab.com/wolutator/build-env-arduino:latest
+        variables:
+                GIT_SUBMODULE_STRATEGY: recursive
+        artifacts:
+                paths:
+                        - sketch.esp8266.esp8266.nodemcu.bin
+        script:
+                - env ARDUINO_SKETCHBOOK_DIR=$CI_PROJECT_DIR arduino-cli compile --fqbn=esp8266:esp8266:nodemcu $CI_PROJECT_DIR/sketch
+                - cp sketch/sketch.esp8266.esp8266.nodemcu.* .
 
 
+
+
+### Uploading to the target
+
+In a final step the CI script will put the generated firmware binary into the Gitlab release area.
+It can be downloaded there and uploaded to the device using the ``esptool.py``.
+
+    esptool.py -p /dev/ttyUSB0 write_flash 0x0 sketch.esp8266.esp8266.nodemcu.bin
+

releaseInfo.json

@@ -1,8 +1,8 @@
 {
-    "releaseTag": "v0.1",
+    "releaseTag": "v1.0.8",
     "createReleaseTag": "true",
-    "releaseName": "Initial release",
-    "description": "Initial release"
+    "releaseName": "colorPattern and watchdog",
+    "description": "introduce the colorPattern config option (swap R and G) and use the mqtt boilerplate code with watchdog support"
   }
   
-  
+  

sketch/ConfigDataStructure.py

@@ -11,8 +11,10 @@ configItems = [
     {"label":"MQTT Topic Color Command", "key":"mqttTopicColorCommand", "type":"C", "length":64, "default":"IoT/RgbLed1/ColorCommand"},
     {"label":"MQTT Topic Command", "key":"mqttTopicCommand", "type":"C", "length":64, "default":"IoT/RgbLed1/Command"},
     {"label":"MQTT DebugTopic", "key":"mqttDebugTopic", "type":"C", "length":64, "default":"IoT/RgbLed1/Debug"},
+    {"label":"MQTT WatchdogTopic", "key":"mqttWatchdogTopic", "type":"C", "length":64, "default":"IoT/Watchdog"},
+    {"label":"Color pattern (rgb=0, grb=1", "key":"colorPattern", "type":"I", "default":0},
     {"label":"DebugMode", "key":"debugMode", "type":"I", "default":0}
 ]
 
-magic = 3235774470
+magic = 3235774471
 appName = "ESP8266 based RGB-LED-Light"

sketch/application.cpp

@@ -102,9 +102,25 @@ void subscribeApplication() {
 
 
 
-static void setColor(int8_t ledNumber, uint8_t red, uint8_t green, uint8_t blue) {
+static void setColor(int16_t ledNumber, uint8_t x, uint8_t y, uint8_t z) {
+	uint8_t red, green, blue;
+
+	switch (configBlock.colorPattern) {
+		case 1:
+		    red = y;
+			green = x;
+			blue = z;
+			break;
+		case 0:
+		default:
+		    red = x;
+			green = y;
+			blue = z;
+			break;
+	}
+
 	if (ledNumber == -1) {
-		for (uint8_t i = 0; i < NUM_OF_LEDs; i++) {
+		for (uint16_t i = 0; i < NUM_OF_LEDs; i++) {
 #ifdef WS2811
 			leds[i].r = red;
 			leds[i].g = green;
@@ -188,13 +204,14 @@ void callbackApplication(char *topic, uint8_t tokenCnt, char **tokens) {
 void setupApplication() {
 	mqttSetup();
 
+
 #ifdef WS2811
 	FastLED.addLeds<NEOPIXEL, PIXEL_PIN>(leds, NUM_OF_LEDs);
 #endif
 #ifdef PL9823
 	pixels.begin();
 
-	for (uint8_t i = 0; i < NUM_OF_LEDs; i++) {
+	for (uint16_t i = 0; i < NUM_OF_LEDs; i++) {
 		pixels.setPixelColor(i, pixels.Color(0,0,0));
 	}
 	pixels.show();

test/test.py

@@ -0,0 +1,23 @@
+import paho.mqtt.client as mqtt
+
+RGB_TOPIC = 'IoT/RgbLedStripe/ColorCommand'
+
+
+client = mqtt.Client(client_id = 'test1')
+
+client.connect("172.16.2.16", 1883, 60)
+
+i = 0
+while True:
+    client.loop()
+
+    i += 1
+    if i == 300:
+        i = 0
+    client.publish(RGB_TOPIC, "{0} 0 0 255".format(i))
+    client.publish(RGB_TOPIC, "{0} 0 255 0".format(i+1))
+    client.publish(RGB_TOPIC, "{0} 255 0 0".format(i+2))
+    client.publish(RGB_TOPIC, "{0} 0 0 0".format(i))
+
+
+