started 4

apps/abstraction/transformation.py

@@ -4,620 +4,48 @@ This module implements a registry-pattern for vendor-specific transformations:
 - Each (device_type, technology, direction) tuple maps to a specific handler function
 - Handlers transform payloads between abstract and vendor-specific formats
 - Unknown combinations fall back to pass-through (no transformation)
+
+Vendor-specific implementations are in the vendors/ subdirectory.
 """
 
 import logging
-import json
 from typing import Any, Callable
 
+from apps.abstraction.vendors import (
+    simulator,
+    zigbee2mqtt,
+    max,
+    shelly,
+    tasmota,
+    hottis_pv_modbus,
+    hottis_wago_modbus,
+)
+
 logger = logging.getLogger(__name__)
 
 
-# ============================================================================
-# HANDLER FUNCTIONS: simulator technology
-# ============================================================================
-
-def _transform_light_simulator_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract light payload to simulator format.
-    
-    Simulator uses same format as abstract protocol (no transformation needed).
-    """
-    return json.dumps(payload)
-
-
-def _transform_light_simulator_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform simulator light payload to abstract format.
-    
-    Simulator uses same format as abstract protocol (no transformation needed).
-    """
-
-    payload = json.loads(payload)
-
-    return payload
-
-
-def _transform_thermostat_simulator_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract thermostat payload to simulator format.
-    
-    Simulator uses same format as abstract protocol (no transformation needed).
-    """
-    return json.dumps(payload)
-
-
-def _transform_thermostat_simulator_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform simulator thermostat payload to abstract format.
-    
-    Simulator uses same format as abstract protocol (no transformation needed).
-    """
-
-    payload = json.loads(payload)
-
-    return payload
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: zigbee2mqtt technology
-# ============================================================================
-
-def _transform_light_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract light payload to zigbee2mqtt format.
-    
-    Transformations:
-    - power: 'on'/'off' -> state: 'ON'/'OFF'
-    - brightness: 0-100 -> brightness: 0-254
-    
-    Example:
-    - Abstract: {'power': 'on', 'brightness': 100}
-    - zigbee2mqtt: {'state': 'ON', 'brightness': 254}
-    """
-    vendor_payload = payload.copy()
-    
-    # Transform power -> state with uppercase values
-    if "power" in vendor_payload:
-        power_value = vendor_payload.pop("power")
-        vendor_payload["state"] = power_value.upper() if isinstance(power_value, str) else power_value
-    
-    # Transform brightness: 0-100 (%) -> 0-254 (zigbee2mqtt range)
-    if "brightness" in vendor_payload:
-        abstract_brightness = vendor_payload["brightness"]
-        if isinstance(abstract_brightness, (int, float)):
-            # Convert percentage (0-100) to zigbee2mqtt range (0-254)
-            vendor_payload["brightness"] = round(abstract_brightness * 254 / 100)
-    
-    return json.dumps(vendor_payload)
-
-
-def _transform_light_zigbee2mqtt_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform zigbee2mqtt light payload to abstract format.
-    
-    Transformations:
-    - state: 'ON'/'OFF' -> power: 'on'/'off'
-    - brightness: 0-254 -> brightness: 0-100
-    
-    Example:
-    - zigbee2mqtt: {'state': 'ON', 'brightness': 254}
-    - Abstract: {'power': 'on', 'brightness': 100}
-    """
-    abstract_payload = json.loads(payload)
-    
-    # Transform state -> power with lowercase values
-    if "state" in abstract_payload:
-        state_value = abstract_payload.pop("state")
-        abstract_payload["power"] = state_value.lower() if isinstance(state_value, str) else state_value
-    
-    # Transform brightness: 0-254 (zigbee2mqtt range) -> 0-100 (%)
-    if "brightness" in abstract_payload:
-        vendor_brightness = abstract_payload["brightness"]
-        if isinstance(vendor_brightness, (int, float)):
-            # Convert zigbee2mqtt range (0-254) to percentage (0-100)
-            abstract_payload["brightness"] = round(vendor_brightness * 100 / 254)
-    
-    return abstract_payload
-
-
-def _transform_thermostat_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract thermostat payload to zigbee2mqtt format.
-    
-    Transformations:
-    - target -> current_heating_setpoint (as string)
-    - mode is ignored (zigbee2mqtt thermostats use system_mode in state only)
-    
-    Example:
-    - Abstract: {'target': 22.0}
-    - zigbee2mqtt: {'current_heating_setpoint': '22.0'}
-    """
-    vendor_payload = {}
-    
-    if "target" in payload:
-        # zigbee2mqtt expects current_heating_setpoint as string
-        vendor_payload["current_heating_setpoint"] = str(payload["target"])
-    
-    return json.dumps(vendor_payload)
-
-
-def _transform_thermostat_zigbee2mqtt_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform zigbee2mqtt thermostat payload to abstract format.
-    
-    Transformations:
-    - current_heating_setpoint -> target (as float)
-    - local_temperature -> current (as float)
-    - system_mode -> mode
-    
-    Example:
-    - zigbee2mqtt: {'current_heating_setpoint': 15, 'local_temperature': 23, 'system_mode': 'heat'}
-    - Abstract: {'target': 15.0, 'current': 23.0, 'mode': 'heat'}
-    """
-    payload = json.loads(payload)
-    abstract_payload = {}
-    
-    # Extract target temperature
-    if "current_heating_setpoint" in payload:
-        setpoint = payload["current_heating_setpoint"]
-        abstract_payload["target"] = float(setpoint)
-    
-    # Extract current temperature
-    if "local_temperature" in payload:
-        current = payload["local_temperature"]
-        abstract_payload["current"] = float(current)
-    
-    # Extract mode
-    if "system_mode" in payload:
-        abstract_payload["mode"] = payload["system_mode"]
-    
-    return abstract_payload
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: contact_sensor - zigbee2mqtt technology
-# ============================================================================
-
-def _transform_contact_sensor_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract contact sensor payload to zigbee2mqtt format.
-    
-    Contact sensors are read-only, so this should not be called for SET commands.
-    Returns payload as-is for compatibility.
-    """
-    logger.warning("Contact sensors are read-only - SET commands should not be used")
-    return json.dumps(payload)
-
-
-def _transform_contact_sensor_zigbee2mqtt_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform zigbee2mqtt contact sensor payload to abstract format.
-    
-    Transformations:
-    - contact: bool -> "open" | "closed"
-      - zigbee2mqtt semantics: False = OPEN, True = CLOSED (inverted!)
-    - battery: pass through (already 0-100)
-    - linkquality: pass through
-    - device_temperature: pass through (if present)
-    - voltage: pass through (if present)
-    
-    Example:
-    - zigbee2mqtt: {"contact": false, "battery": 100, "linkquality": 87}
-    - Abstract: {"contact": "open", "battery": 100, "linkquality": 87}
-    """
-    payload = json.loads(payload)
-    abstract_payload = {}
-    
-    # Transform contact state (inverted logic!)
-    if "contact" in payload:
-        contact_bool = payload["contact"]
-        # zigbee2mqtt: False = OPEN, True = CLOSED
-        abstract_payload["contact"] = "closed" if contact_bool else "open"
-    
-    # Pass through optional fields
-    if "battery" in payload:
-        abstract_payload["battery"] = payload["battery"]
-    
-    if "linkquality" in payload:
-        abstract_payload["linkquality"] = payload["linkquality"]
-    
-    if "device_temperature" in payload:
-        abstract_payload["device_temperature"] = payload["device_temperature"]
-    
-    if "voltage" in payload:
-        abstract_payload["voltage"] = payload["voltage"]
-    
-    return abstract_payload
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: contact_sensor - max technology (Homegear MAX!)
-# ============================================================================
-
-def _transform_contact_sensor_max_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract contact sensor payload to MAX! format.
-    
-    Contact sensors are read-only, so this should not be called for SET commands.
-    Returns payload as-is for compatibility.
-    """
-    logger.warning("Contact sensors are read-only - SET commands should not be used")
-    return json.dumps(payload)
-
-
-def _transform_contact_sensor_max_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform MAX! (Homegear) contact sensor payload to abstract format.
-    
-    MAX! sends "true"/"false" (string or bool) on STATE topic.
-    
-    Transformations:
-    - "true" or True -> "open" (window/door open)
-    - "false" or False -> "closed" (window/door closed)
-    
-    Example:
-    - MAX!: "true" or True
-    - Abstract: {"contact": "open"}
-    """
-    try:
-        contact_value = payload.strip().lower() == "true"
-        
-        # MAX! semantics: True = OPEN, False = CLOSED
-        return {
-            "contact": "open" if contact_value else "closed"
-        }
-    except (ValueError, TypeError) as e:
-        logger.error(f"MAX! contact sensor failed to parse: {payload}, error: {e}")
-        return {
-            "contact": "closed"  # Default to closed on error
-        }
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: temp_humidity_sensor - zigbee2mqtt technology
-# ============================================================================
-
-def _transform_temp_humidity_sensor_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract temp/humidity sensor payload to zigbee2mqtt format.
-    
-    Temp/humidity sensors are read-only, so this should not be called for SET commands.
-    Returns payload as-is for compatibility.
-    """
-    return json.dumps(payload)
-
-
-def _transform_temp_humidity_sensor_zigbee2mqtt_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform zigbee2mqtt temp/humidity sensor payload to abstract format.
-    
-    Passthrough - zigbee2mqtt provides temperature, humidity, battery, linkquality directly.
-    """
-    payload = json.loads(payload)
-    return payload
-
-
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: relay - zigbee2mqtt technology
-# ============================================================================
-
-def _transform_relay_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract relay payload to zigbee2mqtt format.
-    
-    Relay only has power on/off, same transformation as light.
-    - power: 'on'/'off' -> state: 'ON'/'OFF'
-    """
-    vendor_payload = payload.copy()
-    
-    if "power" in vendor_payload:
-        power_value = vendor_payload.pop("power")
-        vendor_payload["state"] = power_value.upper() if isinstance(power_value, str) else power_value
-    
-    return json.dumps(vendor_payload)
-
-
-def _transform_relay_zigbee2mqtt_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform zigbee2mqtt relay payload to abstract format.
-    
-    Relay only has power on/off, same transformation as light.
-    - state: 'ON'/'OFF' -> power: 'on'/'off'
-    """
-    payload = json.loads(payload)
-    abstract_payload = payload.copy()
-    
-    if "state" in abstract_payload:
-        state_value = abstract_payload.pop("state")
-        abstract_payload["power"] = state_value.lower() if isinstance(state_value, str) else state_value
-    
-    return abstract_payload
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: relay - shelly technology
-# ============================================================================
-
-def _transform_relay_shelly_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract relay payload to Shelly format.
-    
-    Shelly expects plain text 'on' or 'off' (not JSON).
-    - power: 'on'/'off' -> 'on'/'off' (plain string)
-    
-    Example:
-    - Abstract: {'power': 'on'}
-    - Shelly: 'on'
-    """
-    power = payload.get("power", "off")
-    return power
-
-
-def _transform_relay_shelly_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform Shelly relay payload to abstract format.
-    
-    Shelly sends plain text 'on' or 'off' (not JSON).
-    - 'on'/'off' -> power: 'on'/'off'
-    
-    Example:
-    - Shelly: 'on'
-    - Abstract: {'power': 'on'}
-    """
-    return {"power": payload.strip()}
-
-# ============================================================================
-# HANDLER FUNCTIONS: relay - tasmota technology
-# ============================================================================
-
-def _transform_relay_tasmota_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract relay payload to Tasmota format.
-    
-    Tasmota expects plain text 'on' or 'off' (not JSON).
-    - power: 'on'/'off' -> 'on'/'off' (plain string)
-    
-    Example:
-    - Abstract: {'power': 'on'}
-    - Tasmota: 'on'
-    """
-    power = payload.get("power", "off")
-    return power
-
-
-def _transform_relay_tasmota_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform Tasmota relay payload to abstract format.
-    
-    Tasmota sends plain text 'on' or 'off' (not JSON).
-    - 'on'/'off' -> power: 'on'/'off'
-    
-    Example:
-    - Tasmota: 'ON'
-    - Abstract: {'power': 'on'}
-    """
-    return {"power": payload.strip().lower()}
-
-# ============================================================================
-# HANDLER FUNCTIONS: relay - hottis_pv_modbus technology
-# ============================================================================
-
-def _transform_relay_hottis_pv_modbus_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract relay payload to Hottis Modbus format.
-    
-    Hottis Modbus expects plain text 'on' or 'off' (not JSON).
-    - power: 'on'/'off' -> 'on'/'off' (plain string)
-    
-    Example:
-    - Abstract: {'power': 'on'}
-    - Hottis Modbus: 'on'
-    """
-    power = payload.get("power", "off")
-    return power
-
-
-def _transform_relay_hottis_pv_modbus_to_abstract(payload: str) -> dict[str, Any]:
-    def _transform_relay_hottis_pv_modbus_to_abstract(payload: str) -> dict[str, Any]:
-        """Transform Hottis Modbus relay payload to abstract format.
-        
-        Hottis Modbus sends JSON like:
-        {"status": "Ok", "timestamp": "...", "state": false, "cnt": 528}
-        
-        We only care about the 'state' field:
-        - state: true  -> power: 'on'
-        - state: false -> power: 'off'
-        """
-        data = json.loads(payload)
-
-        state = data.get("state", False)
-        power = "on" if bool(state) else "off"
-    
-    
-    return {"power": payload.strip()}
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: three_phase_powermeter - hottis_pv_modbus technology
-# ============================================================================
-
-def _transform_three_phase_powermeter_hottis_pv_modbus_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract three_phase_powermeter payload to hottis_pv_modbus format.
-    energy: float = Field(..., description="Total energy in kWh")
-    total_power: float = Field(..., description="Total power in W")
-    phase1_power: float = Field(..., description="Power for phase 1 in W")
-    phase2_power: float = Field(..., description="Power for phase 2 in W")
-    phase3_power: float = Field(..., description="Power for phase 3 in W")
-    phase1_voltage: float = Field(..., description="Voltage for phase 1 in V")
-    phase2_voltage: float = Field(..., description="Voltage for phase 2 in V")
-    phase3_voltage: float = Field(..., description="Voltage for phase 3 in V")
-    phase1_current: float = Field(..., description="Current for phase 1 in A")
-    phase2_current: float = Field(..., description="Current for phase 2 in A")
-    phase3_current: float = Field(..., description="Current for phase 3 in A")
-
-
-    """
-
-    vendor_payload = {
-        "energy": payload.get("energy", 0.0),
-        "total_power": payload.get("total_power", 0.0),
-        "phase1_power": payload.get("phase1_power", 0.0),
-        "phase2_power": payload.get("phase2_power", 0.0),
-        "phase3_power": payload.get("phase3_power", 0.0),
-        "phase1_voltage": payload.get("phase1_voltage", 0.0),
-        "phase2_voltage": payload.get("phase2_voltage", 0.0),
-        "phase3_voltage": payload.get("phase3_voltage", 0.0),
-        "phase1_current": payload.get("phase1_current", 0.0),
-        "phase2_current": payload.get("phase2_current", 0.0),
-        "phase3_current": payload.get("phase3_current", 0.0),
-    }
-
-    return json.dumps(vendor_payload)
-
-
-def _transform_three_phase_powermeter_hottis_pv_modbus_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform hottis_pv_modbus three_phase_powermeter payload to abstract format.
-    
-    Transformations:
-    - Map vendor field names to abstract field names
-        - totalImportEnergy        -> energy
-        - powerL1/powerL2/powerL3  -> phase1_power/phase2_power/phase3_power
-        - voltageL1/voltageL2/voltageL3 -> phase1_voltage/phase2_voltage/phase3_voltage
-        - currentL1/currentL2/currentL3 -> phase1_current/phase2_current/phase3_current
-        - Sum of powerL1..3        -> total_power
-    """
-    data = json.loads(payload)
-
-    # Helper to read numeric values uniformly as float
-    def _get_float(key: str, default: float = 0.0) -> float:
-        return float(data.get(key, default))
-
-    # Read all numeric values via helper for consistent error handling
-    phase1_power = _get_float("powerL1")
-    phase2_power = _get_float("powerL2")
-    phase3_power = _get_float("powerL3")
-
-    phase1_voltage = _get_float("voltageL1")
-    phase2_voltage = _get_float("voltageL2")
-    phase3_voltage = _get_float("voltageL3")
-
-    phase1_current = _get_float("currentL1")
-    phase2_current = _get_float("currentL2")
-    phase3_current = _get_float("currentL3")
-
-    energy = _get_float("totalImportEnergy")
-
-    abstract_payload = {
-        "energy": energy,
-        "total_power": phase1_power + phase2_power + phase3_power,
-        "phase1_power": phase1_power,
-        "phase2_power": phase2_power,
-        "phase3_power": phase3_power,
-        "phase1_voltage": phase1_voltage,
-        "phase2_voltage": phase2_voltage,
-        "phase3_voltage": phase3_voltage,
-        "phase1_current": phase1_current,
-        "phase2_current": phase2_current,
-        "phase3_current": phase3_current,
-    }
-
-    return abstract_payload
-
-
-# ============================================================================
-# HANDLER FUNCTIONS: max technology (Homegear MAX!)
-# ============================================================================
-
-def _transform_thermostat_max_to_vendor(payload: dict[str, Any]) -> str:
-    """Transform abstract thermostat payload to MAX! (Homegear) format.
-    
-    MAX! expects only the integer temperature value (no JSON).
-    
-    Transformations:
-    - Extract 'target' temperature from payload
-    - Convert float to integer (MAX! only accepts integers)
-    - Return as plain string value
-    
-    Example:
-    - Abstract: {'mode': 'heat', 'target': 22.5}
-    - MAX!: "22"
-    
-    Note: MAX! ignores mode - it's always in heating mode
-    """
-    if "target" not in payload:
-        logger.warning(f"MAX! thermostat payload missing 'target': {payload}")
-        return "21"  # Default fallback
-    
-    target_temp = payload["target"]
-    
-    # Convert to integer (MAX! protocol requirement)
-    if isinstance(target_temp, (int, float)):
-        int_temp = int(round(target_temp))
-        return str(int_temp)
-    
-    logger.warning(f"MAX! invalid target temperature type: {type(target_temp)}, value: {target_temp}")
-    return "21"
-
-
-def _transform_thermostat_max_to_abstract(payload: str) -> dict[str, Any]:
-    """Transform MAX! (Homegear) thermostat payload to abstract format.
-    
-    MAX! sends only the integer temperature value (no JSON).
-    
-    Transformations:
-    - Parse plain string/int value
-    - Convert to float for abstract protocol
-    - Wrap in abstract payload structure with mode='heat'
-    
-    Example:
-    - MAX!: "22" or 22
-    - Abstract: {'target': 22.0, 'mode': 'heat'}
-    
-    Note: MAX! doesn't send current temperature via SET_TEMPERATURE topic
-    """
-
-    # Handle both string and numeric input
-    target_temp = float(payload.strip())
-    
-    return {
-        "target": target_temp,
-        "mode": "heat"  # MAX! is always in heating mode
-    }
-
-
 # ============================================================================
 # REGISTRY: Maps (device_type, technology, direction) -> handler function
 # ============================================================================
 
-TransformHandler = Callable[[dict[str, Any]], dict[str, Any]]
+TransformHandler = Callable[[Any], Any]
 
-TRANSFORM_HANDLERS: dict[tuple[str, str, str], TransformHandler] = {
-    # Light transformations
-    ("light", "simulator", "to_vendor"): _transform_light_simulator_to_vendor,
-    ("light", "simulator", "to_abstract"): _transform_light_simulator_to_abstract,
-    ("light", "zigbee2mqtt", "to_vendor"): _transform_light_zigbee2mqtt_to_vendor,
-    ("light", "zigbee2mqtt", "to_abstract"): _transform_light_zigbee2mqtt_to_abstract,
-    
-    # Thermostat transformations
-    ("thermostat", "simulator", "to_vendor"): _transform_thermostat_simulator_to_vendor,
-    ("thermostat", "simulator", "to_abstract"): _transform_thermostat_simulator_to_abstract,
-    ("thermostat", "zigbee2mqtt", "to_vendor"): _transform_thermostat_zigbee2mqtt_to_vendor,
-    ("thermostat", "zigbee2mqtt", "to_abstract"): _transform_thermostat_zigbee2mqtt_to_abstract,
-    ("thermostat", "max", "to_vendor"): _transform_thermostat_max_to_vendor,
-    ("thermostat", "max", "to_abstract"): _transform_thermostat_max_to_abstract,
-    
-    # Contact sensor transformations (support both 'contact' and 'contact_sensor' types)
-    ("contact_sensor", "zigbee2mqtt", "to_vendor"): _transform_contact_sensor_zigbee2mqtt_to_vendor,
-    ("contact_sensor", "zigbee2mqtt", "to_abstract"): _transform_contact_sensor_zigbee2mqtt_to_abstract,
-    ("contact_sensor", "max", "to_vendor"): _transform_contact_sensor_max_to_vendor,
-    ("contact_sensor", "max", "to_abstract"): _transform_contact_sensor_max_to_abstract,
-    ("contact", "zigbee2mqtt", "to_vendor"): _transform_contact_sensor_zigbee2mqtt_to_vendor,
-    ("contact", "zigbee2mqtt", "to_abstract"): _transform_contact_sensor_zigbee2mqtt_to_abstract,
-    ("contact", "max", "to_vendor"): _transform_contact_sensor_max_to_vendor,
-    ("contact", "max", "to_abstract"): _transform_contact_sensor_max_to_abstract,
-    
-    # Temperature & humidity sensor transformations (support both type aliases)
-    ("temp_humidity_sensor", "zigbee2mqtt", "to_vendor"): _transform_temp_humidity_sensor_zigbee2mqtt_to_vendor,
-    ("temp_humidity_sensor", "zigbee2mqtt", "to_abstract"): _transform_temp_humidity_sensor_zigbee2mqtt_to_abstract,
-    ("temp_humidity", "zigbee2mqtt", "to_vendor"): _transform_temp_humidity_sensor_zigbee2mqtt_to_vendor,
-    ("temp_humidity", "zigbee2mqtt", "to_abstract"): _transform_temp_humidity_sensor_zigbee2mqtt_to_abstract,
-    
-    # Relay transformations
-    ("relay", "zigbee2mqtt", "to_vendor"): _transform_relay_zigbee2mqtt_to_vendor,
-    ("relay", "zigbee2mqtt", "to_abstract"): _transform_relay_zigbee2mqtt_to_abstract,
-    ("relay", "shelly", "to_vendor"): _transform_relay_shelly_to_vendor,
-    ("relay", "shelly", "to_abstract"): _transform_relay_shelly_to_abstract,
-    ("relay", "hottis_pv_modbus", "to_vendor"): _transform_relay_hottis_pv_modbus_to_vendor,
-    ("relay", "hottis_pv_modbus", "to_abstract"): _transform_relay_hottis_pv_modbus_to_abstract,
-    ("relay", "tasmota", "to_vendor"): _transform_relay_tasmota_to_vendor,
-    ("relay", "tasmota", "to_abstract"): _transform_relay_tasmota_to_abstract,
+# Build registry from vendor modules
+TRANSFORM_HANDLERS: dict[tuple[str, str, str], TransformHandler] = {}
 
-    # Three-Phase Powermeter transformations
-    ("three_phase_powermeter", "hottis_pv_modbus", "to_vendor"): _transform_three_phase_powermeter_hottis_pv_modbus_to_vendor,
-    ("three_phase_powermeter", "hottis_pv_modbus", "to_abstract"): _transform_three_phase_powermeter_hottis_pv_modbus_to_abstract,
-}
+# Register handlers from each vendor module
+for vendor_name, vendor_module in [
+    ("simulator", simulator),
+    ("zigbee2mqtt", zigbee2mqtt),
+    ("max", max),
+    ("shelly", shelly),
+    ("tasmota", tasmota),
+    ("hottis_pv_modbus", hottis_pv_modbus),
+    ("hottis_wago_modbus", hottis_wago_modbus),
+]:
+    for (device_type, direction), handler in vendor_module.HANDLERS.items():
+        key = (device_type, vendor_name, direction)
+        TRANSFORM_HANDLERS[key] = handler
 
 
 def _get_transform_handler(
@@ -656,7 +84,7 @@ def transform_abstract_to_vendor(
     device_type: str,
     device_technology: str,
     abstract_payload: dict[str, Any]
-) -> dict[str, Any]:
+) -> str:
     """Transform abstract payload to vendor-specific format.
     
     Args:
@@ -665,7 +93,7 @@ def transform_abstract_to_vendor(
         abstract_payload: Payload in abstract home protocol format
     
     Returns:
-        Payload in vendor-specific format
+        Payload in vendor-specific format (as string)
     """
     logger.debug(
         f"transform_abstract_to_vendor IN: type={device_type}, tech={device_technology}, "
@@ -692,7 +120,7 @@ def transform_vendor_to_abstract(
     Args:
         device_type: Type of device (e.g., "light", "thermostat")
         device_technology: Technology/vendor (e.g., "simulator", "zigbee2mqtt")
-        vendor_payload: Payload in vendor-specific format
+        vendor_payload: Payload in vendor-specific format (as string)
     
     Returns:
         Payload in abstract home protocol format

apps/abstraction/vendors/__init__.py

@@ -0,0 +1 @@
+"""Vendor-specific transformation modules."""

apps/abstraction/vendors/hottis_pv_modbus.py

@@ -0,0 +1,134 @@
+"""Hottis PV Modbus vendor transformations."""
+
+import json
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+
+def transform_relay_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract relay payload to Hottis Modbus format.
+    
+    Hottis Modbus expects plain text 'on' or 'off'.
+    
+    Example:
+    - Abstract: {'power': 'on'}
+    - Hottis Modbus: 'on'
+    """
+    power = payload.get("power", "off")
+    return power
+
+
+def transform_relay_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform Hottis Modbus relay payload to abstract format.
+    
+    Hottis Modbus sends plain text 'on' or 'off'.
+    Example:
+    - Hottis PV Modbus: 'on'
+    - Abstract: {'power': 'on'}
+    """
+    return {"power": payload.strip()}
+
+def transform_contact_sensor_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract contact sensor payload to format.
+    
+    Contact sensors are read-only.
+    """
+    logger.warning("Contact sensors are read-only - SET commands should not be used")
+    return json.dumps(payload)
+
+
+def transform_contact_sensor_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform contact sensor payload to abstract format.
+    
+    MAX! sends "true"/"false" (string or bool) on STATE topic.
+    
+    Transformations:
+    - "true" or True -> "open" (window/door open)
+    - "false" or False -> "closed" (window/door closed)
+    
+    Example:
+    - contact sensor: "off"
+    - Abstract: {"contact": "open"}
+    """
+    contact_value = payload.strip().lower() == "off"
+    return {
+        "contact": "open" if contact_value else "closed"
+    }
+
+
+
+def transform_three_phase_powermeter_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract three_phase_powermeter payload to hottis_pv_modbus format."""
+    vendor_payload = {
+        "energy": payload.get("energy", 0.0),
+        "total_power": payload.get("total_power", 0.0),
+        "phase1_power": payload.get("phase1_power", 0.0),
+        "phase2_power": payload.get("phase2_power", 0.0),
+        "phase3_power": payload.get("phase3_power", 0.0),
+        "phase1_voltage": payload.get("phase1_voltage", 0.0),
+        "phase2_voltage": payload.get("phase2_voltage", 0.0),
+        "phase3_voltage": payload.get("phase3_voltage", 0.0),
+        "phase1_current": payload.get("phase1_current", 0.0),
+        "phase2_current": payload.get("phase2_current", 0.0),
+        "phase3_current": payload.get("phase3_current", 0.0),
+    }
+    return json.dumps(vendor_payload)
+
+
+def transform_three_phase_powermeter_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform hottis_pv_modbus three_phase_powermeter payload to abstract format.
+    
+    Transformations:
+    - totalImportEnergy        -> energy
+    - powerL1/powerL2/powerL3  -> phase1_power/phase2_power/phase3_power
+    - voltageL1/voltageL2/voltageL3 -> phase1_voltage/phase2_voltage/phase3_voltage
+    - currentL1/currentL2/currentL3 -> phase1_current/phase2_current/phase3_current
+    - Sum of powerL1..3        -> total_power
+    """
+    data = json.loads(payload)
+
+    def _get_float(key: str, default: float = 0.0) -> float:
+        return float(data.get(key, default))
+
+    phase1_power = _get_float("powerL1")
+    phase2_power = _get_float("powerL2")
+    phase3_power = _get_float("powerL3")
+
+    phase1_voltage = _get_float("voltageL1")
+    phase2_voltage = _get_float("voltageL2")
+    phase3_voltage = _get_float("voltageL3")
+
+    phase1_current = _get_float("currentL1")
+    phase2_current = _get_float("currentL2")
+    phase3_current = _get_float("currentL3")
+
+    energy = _get_float("totalImportEnergy")
+
+    return {
+        "energy": energy,
+        "total_power": phase1_power + phase2_power + phase3_power,
+        "phase1_power": phase1_power,
+        "phase2_power": phase2_power,
+        "phase3_power": phase3_power,
+        "phase1_voltage": phase1_voltage,
+        "phase2_voltage": phase2_voltage,
+        "phase3_voltage": phase3_voltage,
+        "phase1_current": phase1_current,
+        "phase2_current": phase2_current,
+        "phase3_current": phase3_current,
+    }
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("relay", "to_vendor"): transform_relay_to_vendor,
+    ("relay", "to_abstract"): transform_relay_to_abstract,
+    ("three_phase_powermeter", "to_vendor"): transform_three_phase_powermeter_to_vendor,
+    ("three_phase_powermeter", "to_abstract"): transform_three_phase_powermeter_to_abstract,
+    ("contact_sensor", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact_sensor", "to_abstract"): transform_contact_sensor_to_abstract,
+    ("contact", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact", "to_abstract"): transform_contact_sensor_to_abstract,
+}

apps/abstraction/vendors/hottis_wago_modbus.py

@@ -0,0 +1,58 @@
+"""Hottis Wago Modbus vendor transformations."""
+
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+def transform_relay_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract relay payload to Hottis Wago Modbus format.
+    
+    Hottis Wago Modbus expects plain text 'true' or 'false' (not JSON).
+    
+    Example:
+    - Abstract: {'power': 'on'}
+    - Hottis Wago Modbus: 'true' or 'false'
+    """
+    power = payload.get("power", "off")
+
+    # Map abstract "on"/"off" to vendor "true"/"false"
+    if isinstance(power, str):
+        power_lower = power.lower()
+        if power_lower in {"on", "true", "1"}:
+            return "true"
+        if power_lower in {"off", "false", "0"}:
+            return "false"
+
+    # Fallback: any truthy value -> "true", else "false"
+    return "true" if power else "false"
+
+
+def transform_relay_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform Hottis Wago Modbus relay payload to abstract format.
+    
+    Hottis Wago Modbus sends plain text 'true' or 'false'.
+    
+    Example:
+    - Hottis Wago Modbus: 'true'
+    - Abstract: {'power': 'on'}
+    """
+    value = payload.strip().lower()
+
+    if value == "true":
+        power = "on"
+    elif value == "false":
+        power = "off"
+    else:
+        # Fallback for unexpected values: keep as-is
+        logger.warning("Unexpected relay payload from Hottis Wago Modbus: %r", payload)
+        power = value
+
+    return {"power": power}
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("relay", "to_vendor"): transform_relay_to_vendor,
+    ("relay", "to_abstract"): transform_relay_to_abstract,
+}

apps/abstraction/vendors/max.py

@@ -0,0 +1,95 @@
+"""MAX! (Homegear) vendor transformations."""
+
+import json
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+
+def transform_contact_sensor_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract contact sensor payload to MAX! format.
+    
+    Contact sensors are read-only.
+    """
+    logger.warning("Contact sensors are read-only - SET commands should not be used")
+    return json.dumps(payload)
+
+
+def transform_contact_sensor_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform MAX! contact sensor payload to abstract format.
+    
+    MAX! sends "true"/"false" (string or bool) on STATE topic.
+    
+    Transformations:
+    - "true" or True -> "open" (window/door open)
+    - "false" or False -> "closed" (window/door closed)
+    
+    Example:
+    - MAX!: "true"
+    - Abstract: {"contact": "open"}
+    """
+    try:
+        contact_value = payload.strip().lower() == "true"
+        return {
+            "contact": "open" if contact_value else "closed"
+        }
+    except (ValueError, TypeError) as e:
+        logger.error(f"MAX! contact sensor failed to parse: {payload}, error: {e}")
+        return {"contact": "closed"}
+
+
+def transform_thermostat_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract thermostat payload to MAX! format.
+    
+    MAX! expects only the integer temperature value (no JSON).
+    
+    Transformations:
+    - Extract 'target' temperature from payload
+    - Convert float to integer
+    - Return as plain string value
+    
+    Example:
+    - Abstract: {'target': 22.5}
+    - MAX!: "22"
+    """
+    if "target" not in payload:
+        logger.warning(f"MAX! thermostat payload missing 'target': {payload}")
+        return "21"
+    
+    target_temp = payload["target"]
+    
+    if isinstance(target_temp, (int, float)):
+        int_temp = int(round(target_temp))
+        return str(int_temp)
+    
+    logger.warning(f"MAX! invalid target temperature type: {type(target_temp)}")
+    return "21"
+
+
+def transform_thermostat_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform MAX! thermostat payload to abstract format.
+    
+    MAX! sends only the integer temperature value (no JSON).
+    
+    Example:
+    - MAX!: "22"
+    - Abstract: {'target': 22.0, 'mode': 'heat'}
+    """
+    target_temp = float(payload.strip())
+    
+    return {
+        "target": target_temp,
+        "mode": "heat"
+    }
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("contact_sensor", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact_sensor", "to_abstract"): transform_contact_sensor_to_abstract,
+    ("contact", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact", "to_abstract"): transform_contact_sensor_to_abstract,
+    ("thermostat", "to_vendor"): transform_thermostat_to_vendor,
+    ("thermostat", "to_abstract"): transform_thermostat_to_abstract,
+}

apps/abstraction/vendors/shelly.py

@@ -0,0 +1,38 @@
+"""Shelly vendor transformations."""
+
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+
+def transform_relay_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract relay payload to Shelly format.
+    
+    Shelly expects plain text 'on' or 'off' (not JSON).
+    
+    Example:
+    - Abstract: {'power': 'on'}
+    - Shelly: 'on'
+    """
+    power = payload.get("power", "off")
+    return power
+
+
+def transform_relay_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform Shelly relay payload to abstract format.
+    
+    Shelly sends plain text 'on' or 'off'.
+    
+    Example:
+    - Shelly: 'on'
+    - Abstract: {'power': 'on'}
+    """
+    return {"power": payload.strip()}
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("relay", "to_vendor"): transform_relay_to_vendor,
+    ("relay", "to_abstract"): transform_relay_to_abstract,
+}

apps/abstraction/vendors/simulator.py

@@ -0,0 +1,50 @@
+"""Simulator vendor transformations."""
+
+import json
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+
+def transform_light_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract light payload to simulator format.
+    
+    Simulator uses same format as abstract protocol (no transformation needed).
+    """
+    return json.dumps(payload)
+
+
+def transform_light_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform simulator light payload to abstract format.
+    
+    Simulator uses same format as abstract protocol (no transformation needed).
+    """
+    payload = json.loads(payload)
+    return payload
+
+
+def transform_thermostat_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract thermostat payload to simulator format.
+    
+    Simulator uses same format as abstract protocol (no transformation needed).
+    """
+    return json.dumps(payload)
+
+
+def transform_thermostat_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform simulator thermostat payload to abstract format.
+    
+    Simulator uses same format as abstract protocol (no transformation needed).
+    """
+    payload = json.loads(payload)
+    return payload
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("light", "to_vendor"): transform_light_to_vendor,
+    ("light", "to_abstract"): transform_light_to_abstract,
+    ("thermostat", "to_vendor"): transform_thermostat_to_vendor,
+    ("thermostat", "to_abstract"): transform_thermostat_to_abstract,
+}

apps/abstraction/vendors/tasmota.py

@@ -0,0 +1,38 @@
+"""Tasmota vendor transformations."""
+
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+
+def transform_relay_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract relay payload to Tasmota format.
+    
+    Tasmota expects plain text 'on' or 'off' (not JSON).
+    
+    Example:
+    - Abstract: {'power': 'on'}
+    - Tasmota: 'on'
+    """
+    power = payload.get("power", "off")
+    return power
+
+
+def transform_relay_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform Tasmota relay payload to abstract format.
+    
+    Tasmota sends plain text 'ON' or 'OFF'.
+    
+    Example:
+    - Tasmota: 'ON'
+    - Abstract: {'power': 'on'}
+    """
+    return {"power": payload.strip().lower()}
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("relay", "to_vendor"): transform_relay_to_vendor,
+    ("relay", "to_abstract"): transform_relay_to_abstract,
+}

apps/abstraction/vendors/zigbee2mqtt.py

@@ -0,0 +1,209 @@
+"""Zigbee2MQTT vendor transformations."""
+
+import json
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+
+def transform_light_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract light payload to zigbee2mqtt format.
+    
+    Transformations:
+    - power: 'on'/'off' -> state: 'ON'/'OFF'
+    - brightness: 0-100 -> brightness: 0-254
+    
+    Example:
+    - Abstract: {'power': 'on', 'brightness': 100}
+    - zigbee2mqtt: {'state': 'ON', 'brightness': 254}
+    """
+    vendor_payload = payload.copy()
+    
+    # Transform power -> state with uppercase values
+    if "power" in vendor_payload:
+        power_value = vendor_payload.pop("power")
+        vendor_payload["state"] = power_value.upper() if isinstance(power_value, str) else power_value
+    
+    # Transform brightness: 0-100 (%) -> 0-254 (zigbee2mqtt range)
+    if "brightness" in vendor_payload:
+        abstract_brightness = vendor_payload["brightness"]
+        if isinstance(abstract_brightness, (int, float)):
+            vendor_payload["brightness"] = round(abstract_brightness * 254 / 100)
+    
+    return json.dumps(vendor_payload)
+
+
+def transform_light_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform zigbee2mqtt light payload to abstract format.
+    
+    Transformations:
+    - state: 'ON'/'OFF' -> power: 'on'/'off'
+    - brightness: 0-254 -> brightness: 0-100
+    
+    Example:
+    - zigbee2mqtt: {'state': 'ON', 'brightness': 254}
+    - Abstract: {'power': 'on', 'brightness': 100}
+    """
+    abstract_payload = json.loads(payload)
+    
+    # Transform state -> power with lowercase values
+    if "state" in abstract_payload:
+        state_value = abstract_payload.pop("state")
+        abstract_payload["power"] = state_value.lower() if isinstance(state_value, str) else state_value
+    
+    # Transform brightness: 0-254 (zigbee2mqtt range) -> 0-100 (%)
+    if "brightness" in abstract_payload:
+        vendor_brightness = abstract_payload["brightness"]
+        if isinstance(vendor_brightness, (int, float)):
+            abstract_payload["brightness"] = round(vendor_brightness * 100 / 254)
+    
+    return abstract_payload
+
+
+def transform_thermostat_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract thermostat payload to zigbee2mqtt format.
+    
+    Transformations:
+    - target -> current_heating_setpoint (as string)
+    - mode is ignored (zigbee2mqtt thermostats use system_mode in state only)
+    
+    Example:
+    - Abstract: {'target': 22.0}
+    - zigbee2mqtt: {'current_heating_setpoint': '22.0'}
+    """
+    vendor_payload = {}
+    
+    if "target" in payload:
+        vendor_payload["current_heating_setpoint"] = str(payload["target"])
+    
+    return json.dumps(vendor_payload)
+
+
+def transform_thermostat_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform zigbee2mqtt thermostat payload to abstract format.
+    
+    Transformations:
+    - current_heating_setpoint -> target (as float)
+    - local_temperature -> current (as float)
+    - system_mode -> mode
+    
+    Example:
+    - zigbee2mqtt: {'current_heating_setpoint': 15, 'local_temperature': 23, 'system_mode': 'heat'}
+    - Abstract: {'target': 15.0, 'current': 23.0, 'mode': 'heat'}
+    """
+    payload = json.loads(payload)
+    abstract_payload = {}
+    
+    if "current_heating_setpoint" in payload:
+        setpoint = payload["current_heating_setpoint"]
+        abstract_payload["target"] = float(setpoint)
+    
+    if "local_temperature" in payload:
+        current = payload["local_temperature"]
+        abstract_payload["current"] = float(current)
+    
+    if "system_mode" in payload:
+        abstract_payload["mode"] = payload["system_mode"]
+    
+    return abstract_payload
+
+
+def transform_contact_sensor_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract contact sensor payload to zigbee2mqtt format.
+    
+    Contact sensors are read-only, so this should not be called for SET commands.
+    """
+    logger.warning("Contact sensors are read-only - SET commands should not be used")
+    return json.dumps(payload)
+
+
+def transform_contact_sensor_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform zigbee2mqtt contact sensor payload to abstract format.
+    
+    Transformations:
+    - contact: bool -> "open" | "closed"
+      - zigbee2mqtt semantics: False = OPEN, True = CLOSED (inverted!)
+    
+    Example:
+    - zigbee2mqtt: {"contact": false, "battery": 100}
+    - Abstract: {"contact": "open", "battery": 100}
+    """
+    payload = json.loads(payload)
+    abstract_payload = {}
+    
+    if "contact" in payload:
+        contact_bool = payload["contact"]
+        abstract_payload["contact"] = "closed" if contact_bool else "open"
+    
+    # Pass through optional fields
+    for field in ["battery", "linkquality", "device_temperature", "voltage"]:
+        if field in payload:
+            abstract_payload[field] = payload[field]
+    
+    return abstract_payload
+
+
+def transform_temp_humidity_sensor_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract temp/humidity sensor payload to zigbee2mqtt format.
+    
+    Temp/humidity sensors are read-only.
+    """
+    return json.dumps(payload)
+
+
+def transform_temp_humidity_sensor_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform zigbee2mqtt temp/humidity sensor payload to abstract format.
+    
+    Passthrough - zigbee2mqtt provides temperature, humidity, battery, linkquality directly.
+    """
+    payload = json.loads(payload)
+    return payload
+
+
+def transform_relay_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract relay payload to zigbee2mqtt format.
+    
+    - power: 'on'/'off' -> state: 'ON'/'OFF'
+    """
+    vendor_payload = payload.copy()
+    
+    if "power" in vendor_payload:
+        power_value = vendor_payload.pop("power")
+        vendor_payload["state"] = power_value.upper() if isinstance(power_value, str) else power_value
+    
+    return json.dumps(vendor_payload)
+
+
+def transform_relay_to_abstract(payload: str) -> dict[str, Any]:
+    """Transform zigbee2mqtt relay payload to abstract format.
+    
+    - state: 'ON'/'OFF' -> power: 'on'/'off'
+    """
+    payload = json.loads(payload)
+    abstract_payload = payload.copy()
+    
+    if "state" in abstract_payload:
+        state_value = abstract_payload.pop("state")
+        abstract_payload["power"] = state_value.lower() if isinstance(state_value, str) else state_value
+    
+    return abstract_payload
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("light", "to_vendor"): transform_light_to_vendor,
+    ("light", "to_abstract"): transform_light_to_abstract,
+    ("thermostat", "to_vendor"): transform_thermostat_to_vendor,
+    ("thermostat", "to_abstract"): transform_thermostat_to_abstract,
+    ("contact_sensor", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact_sensor", "to_abstract"): transform_contact_sensor_to_abstract,
+    ("contact", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact", "to_abstract"): transform_contact_sensor_to_abstract,
+    ("temp_humidity_sensor", "to_vendor"): transform_temp_humidity_sensor_to_vendor,
+    ("temp_humidity_sensor", "to_abstract"): transform_temp_humidity_sensor_to_abstract,
+    ("temp_humidity", "to_vendor"): transform_temp_humidity_sensor_to_vendor,
+    ("temp_humidity", "to_abstract"): transform_temp_humidity_sensor_to_abstract,
+    ("relay", "to_vendor"): transform_relay_to_vendor,
+    ("relay", "to_abstract"): transform_relay_to_abstract,
+}

apps/pulsegen/main.py

@@ -5,6 +5,7 @@ import json
 import logging
 import os
 import signal
+import uuid
 from typing import Any
 
 from aiomqtt import Client, Message
@@ -163,7 +164,7 @@ async def mqtt_worker(shutdown_event: asyncio.Event) -> None:
             async with Client(
                 hostname=broker,
                 port=port,
-                identifier="pulsegen"
+                identifier=f"pulsegen-{uuid.uuid4()}",
             ) as client:
                 logger.info("Connected to MQTT broker")
                 
@@ -175,14 +176,19 @@ async def mqtt_worker(shutdown_event: asyncio.Event) -> None:
                 # Publish startup message
                 await publish_example(client)
                 
-                # Message loop
+                # Message loop with timeout to allow shutdown check
                 async for message in client.messages:
                     if shutdown_event.is_set():
+                        logger.info("Shutdown event detected, breaking message loop")
                         break
                     try:
                         await handle_message(message, client)
                     except Exception as e:
                         logger.error(f"Error in message handler: {e}", exc_info=True)
+                
+                # If we exit the loop due to shutdown, break the reconnect loop too
+                if shutdown_event.is_set():
+                    break
                         
         except asyncio.CancelledError:
             logger.info("MQTT worker cancelled")
@@ -216,8 +222,17 @@ async def main() -> None:
     # Wait for shutdown signal
     await shutdown_event.wait()
     
-    # Wait for worker to finish
-    await worker_task
+    # Give worker a moment to finish gracefully
+    logger.info("Waiting for MQTT worker to finish...")
+    try:
+        await asyncio.wait_for(worker_task, timeout=5.0)
+    except asyncio.TimeoutError:
+        logger.warning("MQTT worker did not finish in time, cancelling...")
+        worker_task.cancel()
+        try:
+            await worker_task
+        except asyncio.CancelledError:
+            pass
     
     logger.info("Pulsegen application stopped")
 

apps/ui/templates/garage.html

@@ -312,7 +312,8 @@
         // Device IDs for garage devices
         const GARAGE_DEVICES = [
             'power_relay_caroutlet',
-            'powermeter_caroutlet'
+            'powermeter_caroutlet',
+            'sensor_caroutlet'
         ];
 
         // Device states
@@ -410,7 +411,17 @@
                 renderOutletControls(controlSection, device);
                 container.appendChild(controlSection);
 
-                // 3. Powermeter section
+                // 3. Feedback section
+                const feedbackDevice = Object.values(devicesData).find(d => d.device_id === 'sensor_caroutlet');
+                if (feedbackDevice) {
+                    const feedbackSection = document.createElement('div');
+                    feedbackSection.className = 'device-section';
+                    feedbackSection.dataset.deviceId = feedbackDevice.device_id;
+                    renderFeedbackDisplay(feedbackSection, feedbackDevice);
+                    container.appendChild(feedbackSection);
+                }
+
+                // 4. Powermeter section
                 const powermeterDevice = Object.values(devicesData).find(d => d.device_id === 'powermeter_caroutlet');
                 if (powermeterDevice) {
                     const powermeterSection = document.createElement('div');
@@ -424,7 +435,6 @@
         function renderOutletControls(container, device) {
             const controlGroup = document.createElement('div');
             controlGroup.style.textAlign = 'center';
-            // controlGroup.style.marginBottom = '8px';
 
             const state = deviceStates[device.device_id];
             const currentPower = state?.power === 'on';
@@ -440,36 +450,36 @@
             label.className = 'toggle-label';
             label.textContent = currentPower ? 'Ein' : 'Aus';
 
-            // Status display
-            // const stateDisplay = document.createElement('div');
-            // stateDisplay.style.marginTop = '16px';
-            // stateDisplay.style.fontSize = '18px';
-            // stateDisplay.style.fontWeight = '600';
-            // stateDisplay.style.color = currentPower ? '#34c759' : '#666';
-            // stateDisplay.textContent = `Status: ${currentPower ? 'Eingeschaltet' : 'Ausgeschaltet'}`;
-
             controlGroup.appendChild(toggleSwitch);
             controlGroup.appendChild(label);
-            // controlGroup.appendChild(stateDisplay);
 
             container.appendChild(controlGroup);
         }
 
+        function renderFeedbackDisplay(container, device) {
+            const state = deviceStates[device.device_id] || {};
+            const controlGroup = document.createElement('div');
+            controlGroup.style.textAlign = 'center';
+
+            const label = document.createElement('div');
+            label.className = 'toggle-label';
+
+            console.log(`Rendering feedback for ${device.device_id}:`, state);
+
+            if (state.contact === 'closed') {
+                label.textContent = 'Schütz ✅ eingeschaltet';
+            } else {
+                label.textContent = 'Schütz 🅾️ ausgeschaltet';
+            }
+
+            controlGroup.appendChild(label);
+            container.appendChild(controlGroup);
+        }
 
 
         function renderThreePhasePowerDisplay(container, device) {
             const state = deviceStates[device.device_id] || {};
 
-            // Leistungsmessung Title
-            // const title = document.createElement('h3');
-            // title.style.margin = '0 0 20px 0';
-            // title.style.fontSize = '18px';
-            // title.style.fontWeight = '600';
-            // title.style.color = '#333';
-            // title.textContent = 'Leistungsmessung';
-            // container.appendChild(title);
-
-            // Übersicht
             const overviewGrid = document.createElement('div');
             overviewGrid.className = 'state-grid';
             overviewGrid.innerHTML = `
@@ -484,16 +494,13 @@
             `;
             container.appendChild(overviewGrid);
 
-            // Phasen Title
             const phaseTitle = document.createElement('h4');
             phaseTitle.style.margin = '20px 0 8px 0';
             phaseTitle.style.fontSize = '16px';
             phaseTitle.style.fontWeight = '600';
             phaseTitle.style.color = '#333';
-            // phaseTitle.textContent = 'Phasen';
             container.appendChild(phaseTitle);
 
-            // Phasen Details
             const phaseGrid = document.createElement('div');
             phaseGrid.className = 'phase-grid';
             phaseGrid.innerHTML = `
@@ -601,12 +608,14 @@
             const state = deviceStates[deviceId];
             console.log(`Updating UI for ${deviceId}:`, state);
 
-            switch (device.type) {
-                case 'relay':
-                case 'outlet':
+            switch (deviceId) {
+                case 'power_relay_caroutlet':
                     updateOutletUI(deviceId, state);
                     break;
-                case 'three_phase_powermeter':
+                case 'sensor_caroutlet':
+                    updateFeedbackDisplay(deviceId, state);
+                    break;
+                case 'powermeter_caroutlet':
                     updateThreePhasePowerUI(deviceId, state);
                     break;
             }
@@ -637,6 +646,29 @@
             }
         }
 
+        function updateFeedbackDisplay(deviceId, state) {
+            const section = document.querySelector(`[data-device-id="${deviceId}"]`);
+            if (!section) return;
+
+            const label = section.querySelector('.toggle-label');
+
+            if (label) {
+                const isOn = state.contact === 'closed';
+                label.textContent = isOn ? 'Schütz ✅ eingeschaltet' : 'Schütz 🅾️ ausgeschaltet';
+
+                // Update state display in separate card
+                const cards = section.querySelectorAll('.card');
+                if (cards.length >= 3) { // Header, Control, State
+                    const stateCard = cards[2];
+                    stateCard.innerHTML = `
+                        <div style="font-size: 18px; font-weight: 600; color: ${isOn ? '#34c759' : '#666'};">
+                            Status: ${isOn ? 'Eingeschaltet' : 'Ausgeschaltet'}
+                        </div>
+                    `;
+                }
+            }
+        }
+
         function updateThreePhasePowerUI(deviceId, state) {
             // Update overview
             const totalPower = document.getElementById(`total-power-${deviceId}`);

config/devices.yaml

@@ -860,7 +860,6 @@ devices:
   topics:
     set: "IoT/Car/Control"
     state: "IoT/Car/Control/State"
-
 - device_id: powermeter_caroutlet
   name: Car Outlet
   type: three_phase_powermeter
@@ -868,6 +867,13 @@ devices:
   technology: hottis_pv_modbus
   topics:
     state: "IoT/Car/Values"
+- device_id: sensor_caroutlet
+  name: Car Outlet
+  type: contact
+  cap_version: contact_sensor@1.0.0
+  technology: hottis_pv_modbus
+  topics:
+    state: IoT/Car/Feedback/State
 
 - device_id: schranklicht_flur_vor_kueche
   name: Schranklicht Flur vor Küche

config/layout.yaml

@@ -317,8 +317,12 @@ rooms:
     title: Ladestrom
     icon: ⚡
     rank: 310
+  - device_id: sensor_caroutlet
+    title: Schützzustand
+    icon: 🔌
+    rank: 315
   - device_id: powermeter_caroutlet
-    title: Ladestrom
+    title: Messwerte
     icon: 📊
     rank: 320