test devices

apps/abstraction/transformation.py

@@ -15,6 +15,7 @@ from apps.abstraction.vendors import (
     simulator,
     zigbee2mqtt,
     max,
+    test,
     shelly,
     tasmota,
     hottis_pv_modbus,
@@ -40,6 +41,7 @@ for vendor_name, vendor_module in [
     ("simulator", simulator),
     ("zigbee2mqtt", zigbee2mqtt),
     ("max", max),
+    ("test", test),
     ("shelly", shelly),
     ("tasmota", tasmota),
     ("hottis_pv_modbus", hottis_pv_modbus),

apps/abstraction/vendors/test.py

@@ -0,0 +1,62 @@
+"""test vendor transformations."""
+
+import json
+import logging
+from typing import Any
+
+logger = logging.getLogger(__name__)
+
+
+def transform_contact_sensor_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract contact sensor payload to MAX! format.
+    
+    Contact sensors are read-only.
+    """
+    logger.warning("Contact sensors are read-only - SET commands should not be used")
+    return json.dumps(payload)
+
+
+def transform_contact_sensor_to_abstract(payload: str) -> dict[str, Any]:
+    try:
+        contact_value = payload.strip().lower()
+        return {
+            "contact": "open" if (contact_value == "open") else "closed"
+        }
+    except (ValueError, TypeError) as e:
+        logger.error(f"contact sensor failed to parse: {payload}, error: {e}")
+        return {"contact": "closed"}
+
+
+def transform_thermostat_to_vendor(payload: dict[str, Any]) -> str:
+    if "target" not in payload:
+        logger.warning(f"thermostat payload missing 'target': {payload}")
+        return "21"
+    
+    target_temp = payload["target"]
+    
+    if isinstance(target_temp, (int, float)):
+        int_temp = int(round(target_temp))
+        return str(int_temp)
+    
+    logger.warning(f"invalid target temperature type: {type(target_temp)}")
+    return "21"
+
+
+def transform_thermostat_to_abstract(payload: str) -> dict[str, Any]:
+    target_temp = float(payload.strip())
+    
+    return {
+        "target": target_temp,
+        "mode": "heat"
+    }
+
+
+# Registry of handlers for this vendor
+HANDLERS = {
+    ("contact_sensor", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact_sensor", "to_abstract"): transform_contact_sensor_to_abstract,
+    ("contact", "to_vendor"): transform_contact_sensor_to_vendor,
+    ("contact", "to_abstract"): transform_contact_sensor_to_abstract,
+    ("thermostat", "to_vendor"): transform_thermostat_to_vendor,
+    ("thermostat", "to_abstract"): transform_thermostat_to_abstract,
+}

config/devices.yaml

@@ -466,6 +466,21 @@ devices:
     model: "MAX! Thermostat"
     peer_id: "41"
     channel: "1"
+- device_id: thermostat_bad_unten
+  homekit_aid: 31
+  name: Heizung
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: zigbee2mqtt
+  features:
+    heating: true
+    temperature_range:
+    - 5
+    - 30
+    temperature_step: 0.5
+  topics:
+    state: "zigbee2mqtt/0x003c84fffebdcc28"
+    set: "zigbee2mqtt/0x003c84fffebdcc28/set"
 - device_id: sterne_wohnzimmer
   homekit_aid: 32
   name: Sterne
@@ -1138,12 +1153,30 @@ devices:
     state: "zigbee2mqtt/0x842e14fffefe4ba4"
     set: "zigbee2mqtt/0x842e14fffefe4ba4/set"
 
-- device_id: thermostat_bad_unten
-  homekit_aid: 31
-  name: Heizung
+- device_id: kontakt_test_1
+  homekit_aid: 97
+  name: Kontakt Test 1
+  type: contact
+  cap_version: contact_sensor@1.0.0
+  technology: test
+  topics:
+    state: test/kontakt1/state
+  features: {}
+- device_id: kontakt_test_2
+  homekit_aid: 98
+  name: Kontakt Test 2
+  type: contact
+  cap_version: contact_sensor@1.0.0
+  technology: test
+  topics:
+    state: test/kontakt2/state
+  features: {}
+- device_id: thermostat_test
+  homekit_aid: 99
+  name: Thermostat Test
   type: thermostat
   cap_version: "thermostat@1.0.0"
-  technology: zigbee2mqtt
+  technology: test
   features:
     heating: true
     temperature_range:
@@ -1151,5 +1184,6 @@ devices:
     - 30
     temperature_step: 0.5
   topics:
-    state: "zigbee2mqtt/0x003c84fffebdcc28"
-    set: "zigbee2mqtt/0x003c84fffebdcc28/set"
+    state: "test/thermostat1/state"
+    set: "test/thermostat1/set"
+  

config/rules.yaml

@@ -9,7 +9,7 @@ rules:
     thermostats:
     - thermostat_bad_unten
   params:
-    eco_target: 16.0
+    eco_target: 5.0
     open_min_secs: 20
     close_min_secs: 20
 - id: window_setback_esszimmer
@@ -23,7 +23,7 @@ rules:
     thermostats:
     - thermostat_esszimmer
   params:
-    eco_target: 16.0
+    eco_target: 5.0
     open_min_secs: 20
     close_min_secs: 20
     previous_target_ttl_secs: 86400
@@ -38,7 +38,7 @@ rules:
     thermostats:
     - thermostat_wohnzimmer
   params:
-    eco_target: 16.0
+    eco_target: 5.0
     open_min_secs: 20
     close_min_secs: 20
     previous_target_ttl_secs: 86400
@@ -55,7 +55,7 @@ rules:
     thermostats:
     - thermostat_kueche
   params:
-    eco_target: 16.0
+    eco_target: 5.0
     open_min_secs: 20
     close_min_secs: 20
     previous_target_ttl_secs: 86400
@@ -71,7 +71,7 @@ rules:
     thermostats:
     - thermostat_patty
   params:
-    eco_target: 16.0
+    eco_target: 5.0
     open_min_secs: 20
     close_min_secs: 20
     previous_target_ttl_secs: 86400
@@ -85,7 +85,7 @@ rules:
     thermostats:
     - thermostat_schlafzimmer
   params:
-    eco_target: 16.0
+    eco_target: 5.0
     open_min_secs: 20
     close_min_secs: 20
     previous_target_ttl_secs: 86400
@@ -99,7 +99,7 @@ rules:
     thermostats:
     - thermostat_wolfgang
   params:
-    eco_target: 16.0
+    eco_target: 5.0
     open_min_secs: 20
     close_min_secs: 20
 - id: window_setback_bad_oben
@@ -112,6 +112,20 @@ rules:
     thermostats:
     - thermostat_bad_oben
   params:
-    eco_target: 16.0
+    eco_target: 5.0
+    open_min_secs: 20
+    close_min_secs: 20
+- id: window_setback_test
+  enabled: true
+  name: Fensterabsenkung Test
+  type: window_setback@1.0
+  objects:
+    contacts:
+    - kontakt_test_1
+    - kontakt_test_2
+    thermostats:
+    - thermostat_test
+  params:
+    eco_target: 7.0
     open_min_secs: 20
     close_min_secs: 20

tools/deploy-configuration.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+NAMESPACE=homea2
+
+kubectl create configmap home-automation-config \
+        --from-file=devices.yaml=config/devices.yaml \
+        --from-file=groups.yaml=config/groups.yaml \
+        --from-file=layout.yaml=config/layout.yaml \
+        --from-file=rules.yaml=config/rules.yaml \
+        --from-file=scenes.yaml=config/scenes.yaml \
+        --namespace=$NAMESPACE \
+        --dry-run=client -o yaml | kubectl apply -f - 
+
+kubectl apply -f deployment/configmap.yaml -n $NAMESPACE
+