wn/ModbusThermometer
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

more cali stuff

Browse Source
This commit is contained in:
Wolfgang Hottgenroth
2014-11-21 07:47:35 +01:00
parent 329c9ac970
commit 752eb18691
1 changed files with 36 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

49
ModbusThermometer.cpp
View File

@ -1,6 +1,7 @@
#include "Arduino.h"
#include "Metro.h"
#include "Streaming.h"
#include "ads1210.h"
#include "led.h"
@ -10,6 +11,7 @@
const uint8_t LED_PIN = 8;
const uint8_t ADC_1_CS_PIN = 9;
@ -39,6 +41,8 @@ uint32_t uptimeSeconds = 0;
typedef enum { e_CAL_IDLE, e_CAL_RUNNING, e_CAL_SET, e_CAL_COMPLETE } tCalibrationState;
bool calibrationOffsetEnabled = false;
bool calibrationFactorEnabled = false;
tCalibrationState calibrationState = e_CAL_IDLE;
uint16_t calibrationCycleCnt = 0;
float calibrationValueSum[NUM_OF_CHANNELS];
@ -88,15 +92,28 @@ struct {
void setup() {
pinMode(CAL_ENABLE, INPUT_PULLUP);
pinMode(CAL_FACTOR_ENABLE, INPUT_PULLUP);
pinMode(CAL_OFFSET_ENABLE, INPUT_PULLUP);
delay(100);
calibrationOffsetEnable = (digitalRead(CAL_ENABLE) == 0) && (digitalRead(CAL_OFFSET_ENABLE) == 0);
calibrationFactorEnable = (digitalRead(CAL_ENABLE) == 0) && (digitalRead(CAL_FACTOR_ENABLE) == 0);
bool initializeConfig = Config::initialize();
led.begin(LED_PIN);
ads1210[0].begin(ADC_1_CS_PIN, ADC_1_RDY_PIN, initializeConfig, Config::ADC1START);
ads1210[1].begin(ADC_2_CS_PIN, ADC_2_RDY_PIN, initializeConfig, Config::ADC2START);
thermometer[0].begin(initializeConfig, Config::THERMO1START);
thermometer[1].begin(initializeConfig, Config::THERMO2START);
modbus_configure(&Serial, MODBUS_BAUD, SERIAL_8N2, MODBUS_ID, MODBUS_TX_ENABLE_PIN,
sizeof(modbusHoldingRegisters), (uint16_t*)(&modbusHoldingRegisters));
if (calibrationOffsetEnable || calibrationFactor Enable) {
Serial.begin(9600);
} else {
modbus_configure(&Serial, MODBUS_BAUD, SERIAL_8N2, MODBUS_ID, MODBUS_TX_ENABLE_PIN,
sizeof(modbusHoldingRegisters), (uint16_t*)(&modbusHoldingRegisters));
}
for (uint8_t i = 0; i < NUM_OF_CHANNELS; i++) {
modbusHoldingRegisters.channelVariables[i].calOffset.in = ads1210[i].getCalOffset();
@ -105,9 +122,6 @@ void setup() {
calibrationValueSum[i] = 0.0;
}
pinMode(CAL_ENABLE, INPUT_PULLUP);
pinMode(CAL_FACTOR_ENABLE, INPUT_PULLUP);
pinMode(CAL_OFFSET_ENABLE, INPUT_PULLUP);
}
void loop() {
@ -128,13 +142,15 @@ void loop() {
if (secondTick.check() == 1) {
if ((digitalRead(CAL_ENABLE) == 0) &&
if ((calibrationOffsetEnable || calibrationFactorEnable) &&
(calibrationState != e_CAL_COMPLETE)) {
Serial << "Calibration enabled" << endl;
led.on();
switch (calibrationState) {
case e_CAL_IDLE:
Serial << "Calibration state idle" << endl;
for (uint8_t i = 0; i < NUM_OF_CHANNELS; i++) {
ads1210[i].setCalOffset(0.0);
ads1210[i].setCalFactor(1.0);
@ -142,35 +158,43 @@ void loop() {
calibrationState = e_CAL_RUNNING;
break;
case e_CAL_RUNNING:
Serial << "Calibration state running" << endl;
calibrationCycleCnt++;
Serial << " Cnt: " << calibrationCycleCnt++ << endl;
for (uint8_t i = 0; i < NUM_OF_CHANNELS; i++) {
calibrationValueSum[i] += ads1210[i].getR();
float r = ads1210[i].getR();
calibrationValueSum[i] += r;
Serial << " Channel: " << i << ", r: " << r << endl;
}
if (calibrationCycleCnt >= CALIBRATION_CYCLES) {
calibrationState = e_CAL_SET;
}
break;
case e_CAL_SET:
Serial << "Calibration state set" << endl;
// calculate and set according to selected calibration mode
if (digitalRead(CAL_OFFSET_ENABLE) == 0) {
if (calibrationOffsetEnable) {
// for offset calibration, the terminals needs to be shorten
// offset calibration needs to be performed first
for (uint8_t i = 0; i < NUM_OF_CHANNELS; i++) {
float offset = calibrationValueSum[i] / ((float)calibrationCycleCnt);
ads1210[i].setCalOffset(offset);
Serial << "Setting offset, Channel: " << i << ", Offset: " << offset << endl;
}
}
if (digitalRead(CAL_FACTOR_ENABLE) == 0) {
if (calibrationFactorEnable) {
// for factor calibration, a 1000R resistor needs to be connected
// to the terminals
for (uint8_t i = 0; i < NUM_OF_CHANNELS; i++) {
float factor = 1000.0 / (calibrationValueSum[i] / ((float)calibrationCycleCnt));
ads1210[i].setCalFactor(factor);
Serial << "Setting factor, Channel: " << i << ", Factor: " << factor << endl;
}
}
calibrationState = e_CAL_COMPLETE;
break;
default:
Serial << "Calibration state default" << endl;
calibrationState = e_CAL_COMPLETE;
break;
}
@ -178,12 +202,11 @@ void loop() {
led.toggle();
}
uptimeSeconds++;
modbusHoldingRegisters.uptimeSeconds.in = uptimeSeconds;
}
modbus_update();
if (! (calibrationOffsetEnable || calibrationFactorEnable)) {
modbus_update();
}
}