• start dev environment using startDevEnv.sh
• build application in container in directory ~/project using arduino-cli compile --fqbn=Heltec-esp32:esp32:WIFI_LoRa_32_V3 --export-binaries /home/arduino/project/sketch/
• flash device using esptool.py --port /dev/tty.usbserial-0001 --baud 921600 --chip esp32s3 write_flash --flash_mode dio --flash_size 8MB 0x0 sketch.ino.bootloader.bin 0x8000 sketch.ino.partitions.bin 0x10000 sketch.ino.bin

/Users/wn/Library/Arduino15/packages/Heltec-esp32/tools/esptool_py/3.3.0/esptool --chip esp32s3 --port /dev/cu.usbserial-0001 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 8MB 0x0 /var/folders/vy/d60s0tzx3mn8bfy6ssd27hl00000gn/T/arduino_build_190148/LoRaWan.ino.bootloader.bin 0x8000 /var/folders/vy/d60s0tzx3mn8bfy6ssd27hl00000gn/T/arduino_build_190148/LoRaWan.ino.partitions.bin 0xe000 /Users/wn/Library/Arduino15/packages/Heltec-esp32/hardware/esp32/0.0.7/tools/partitions/boot_app0.bin 0x10000 /var/folders/vy/d60s0tzx3mn8bfy6ssd27hl00000gn/T/arduino_build_190148/LoRaWan.ino.bin