Merge branch 'FirstReleaseOutThereBranch'

.gitignore

@@ -6,5 +6,5 @@ cube/pubsubc.a
 test
 .bash_history
 .vscode
-
+tools/ENV
 

cube/Core/Inc/main.h

@@ -61,7 +61,6 @@ void Error_Handler(void);
 #define eepromSpi hspi1
 #define etherSpi hspi2
 #define debugUart huart1
-#define modemUart huart2
 #define mainsCnt htim1
 #define LED_Red_Pin GPIO_PIN_13
 #define LED_Red_GPIO_Port GPIOC
@@ -69,12 +68,6 @@ void Error_Handler(void);
 #define LED_Green_GPIO_Port GPIOC
 #define LED_Blue_Pin GPIO_PIN_15
 #define LED_Blue_GPIO_Port GPIOC
-#define MODEM_RES_Pin GPIO_PIN_1
-#define MODEM_RES_GPIO_Port GPIOA
-#define MODEM_TX_Pin GPIO_PIN_2
-#define MODEM_TX_GPIO_Port GPIOA
-#define MODEM_RX_Pin GPIO_PIN_3
-#define MODEM_RX_GPIO_Port GPIOA
 #define EEPROM_CS_Pin GPIO_PIN_4
 #define EEPROM_CS_GPIO_Port GPIOA
 #define EEPROM_SCK_Pin GPIO_PIN_5

cube/Core/Inc/usart.h

@@ -31,14 +31,12 @@
 /* USER CODE END Includes */
 
 extern UART_HandleTypeDef huart1;
-extern UART_HandleTypeDef huart2;
 
 /* USER CODE BEGIN Private defines */
 
 /* USER CODE END Private defines */
 
 void MX_USART1_UART_Init(void);
-void MX_USART2_UART_Init(void);
 
 /* USER CODE BEGIN Prototypes */
 

cube/Core/Src/gpio.c

@@ -52,7 +52,7 @@ void MX_GPIO_Init(void)
   HAL_GPIO_WritePin(GPIOC, LED_Red_Pin|LED_Green_Pin|LED_Blue_Pin, GPIO_PIN_RESET);
 
   /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOA, MODEM_RES_Pin|EEPROM_CS_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(EEPROM_CS_GPIO_Port, EEPROM_CS_Pin, GPIO_PIN_RESET);
 
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOB, ETHER_RES_Pin|ETHER_CS_Pin|Debug_Signal_2_Pin|Debug_Signal_1_Pin, GPIO_PIN_RESET);
@@ -64,12 +64,12 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
 
-  /*Configure GPIO pins : PAPin PAPin */
+  /*Configure GPIO pin : PtPin */
-  GPIO_InitStruct.Pin = MODEM_RES_Pin|EEPROM_CS_Pin;
+  GPIO_InitStruct.Pin = EEPROM_CS_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+  HAL_GPIO_Init(EEPROM_CS_GPIO_Port, &GPIO_InitStruct);
 
   /*Configure GPIO pin : PtPin */
   GPIO_InitStruct.Pin = ADMIN_MODE_Pin;

cube/Core/Src/main.c

@@ -99,7 +99,6 @@ int main(void)
   MX_TIM1_Init();
   MX_USART1_UART_Init();
   MX_IWDG_Init();
-  MX_USART2_UART_Init();
   /* USER CODE BEGIN 2 */
   my_setup_2();
 

cube/Core/Src/main.c-bak

@@ -94,7 +94,6 @@ int main(void)
   MX_TIM1_Init();
   MX_USART1_UART_Init();
   MX_IWDG_Init();
-  MX_USART2_UART_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */

cube/Core/Src/usart.c

@@ -25,7 +25,6 @@
 /* USER CODE END 0 */
 
 UART_HandleTypeDef huart1;
-UART_HandleTypeDef huart2;
 
 /* USART1 init function */
 
@@ -45,25 +44,6 @@ void MX_USART1_UART_Init(void)
     Error_Handler();
   }
 
-}
-/* USART2 init function */
-
-void MX_USART2_UART_Init(void)
-{
-
-  huart2.Instance = USART2;
-  huart2.Init.BaudRate = 115200;
-  huart2.Init.WordLength = UART_WORDLENGTH_8B;
-  huart2.Init.StopBits = UART_STOPBITS_1;
-  huart2.Init.Parity = UART_PARITY_NONE;
-  huart2.Init.Mode = UART_MODE_TX_RX;
-  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
-  if (HAL_UART_Init(&huart2) != HAL_OK)
-  {
-    Error_Handler();
-  }
-
 }
 
 void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
@@ -100,33 +80,6 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
 
   /* USER CODE END USART1_MspInit 1 */
   }
-  else if(uartHandle->Instance==USART2)
-  {
-  /* USER CODE BEGIN USART2_MspInit 0 */
-
-  /* USER CODE END USART2_MspInit 0 */
-    /* USART2 clock enable */
-    __HAL_RCC_USART2_CLK_ENABLE();
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration
-    PA2     ------> USART2_TX
-    PA3     ------> USART2_RX
-    */
-    GPIO_InitStruct.Pin = MODEM_TX_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-    HAL_GPIO_Init(MODEM_TX_GPIO_Port, &GPIO_InitStruct);
-
-    GPIO_InitStruct.Pin = MODEM_RX_Pin;
-    GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    HAL_GPIO_Init(MODEM_RX_GPIO_Port, &GPIO_InitStruct);
-
-  /* USER CODE BEGIN USART2_MspInit 1 */
-
-  /* USER CODE END USART2_MspInit 1 */
-  }
 }
 
 void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
@@ -152,24 +105,6 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
 
   /* USER CODE END USART1_MspDeInit 1 */
   }
-  else if(uartHandle->Instance==USART2)
-  {
-  /* USER CODE BEGIN USART2_MspDeInit 0 */
-
-  /* USER CODE END USART2_MspDeInit 0 */
-    /* Peripheral clock disable */
-    __HAL_RCC_USART2_CLK_DISABLE();
-
-    /**USART2 GPIO Configuration
-    PA2     ------> USART2_TX
-    PA3     ------> USART2_RX
-    */
-    HAL_GPIO_DeInit(GPIOA, MODEM_TX_Pin|MODEM_RX_Pin);
-
-  /* USER CODE BEGIN USART2_MspDeInit 1 */
-
-  /* USER CODE END USART2_MspDeInit 1 */
-  }
 }
 
 /* USER CODE BEGIN 1 */

cube/Makefile.sav

@@ -97,11 +97,14 @@ C_SOURCES += \
 User/Src/ports.c \
 User/Src/wizHelper.c \
 User/Src/networkAbstractionLayer_lan.c
+NETWORK_STACK=1
 endif
 
 ifeq ($(NETWORK), WiFi)
 C_SOURCES += \
-User/Src/networkAbstractionLayer_wifi.c
+User/Src/networkAbstractionLayer_wifi.c \
+User/Src/modemCom.c
+NETWORK_STACK=2
 endif
 
 # ASM sources
@@ -181,7 +184,7 @@ endif
 # compile gcc flags
 ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -Werror -fdata-sections -ffunction-sections
 
-CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -DNETWORK=$(NETWORK) -DVERSION="\"$(VERSION)\"" -Wall -Werror -fdata-sections -ffunction-sections
+CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -DNETWORK_STACK=$(NETWORK_STACK) -DVERSION="\"$(VERSION)\"" -Wall -Werror -fdata-sections -ffunction-sections
 
 ifeq ($(DEBUG), 1)
 CFLAGS += -g -gdwarf-2

cube/User/Inc/networkAbstractionLayer_impl.h

@@ -2,10 +2,11 @@
 #define _NETWORK_ABSTRACTION_LAYER_IMPL_H_
 
 #include <stdint.h>
+#include <stdbool.h>
 
 uint64_t networkSntpQuery();
 int8_t networkUdpSend(char *hostname, uint16_t port, uint8_t *buf, uint16_t bufLen);
 void networkImplInit();
-
+bool isNetworkAvailable();
 
 #endif /* _NETWORK_ABSTRACTION_LAYER_IMPL_H_ */

cube/User/Inc/show.h

@@ -12,7 +12,7 @@ typedef enum {
     LED_BLUE
 } signalPin_t;
 
-typedef enum { ON, OFF, TOGGLE, BLINK } signalAction_t;
+typedef enum { ON, OFF, TOGGLE, BLINK, BLINK_FAST } signalAction_t;
 
 void showInit();
 void show(signalPin_t signalPin, signalAction_t action);

cube/User/Inc/wizHelper.h

@@ -7,10 +7,9 @@
 
 
 int wizInit();
-bool isNetworkAvailable();
+bool wizIsNetworkAvailable();
 uint8_t* wizGetIPAddress();
 bool wizDnsQuery(char *name, uint8_t *ip);
-uint64_t wizSntpQuery();
 
 
 #endif // _WIZHELPER_H_

cube/User/Src/counter.c

@@ -48,7 +48,7 @@ void counterMinuteTick(void *handle) {
             minuteBuffer->s.totalRunningHours = deviceStats->totalRunningHours;
             minuteBuffer->s.totalPowercycles = deviceStats->totalPowercycles;
             minuteBuffer->s.totalWatchdogResets = deviceStats->totalWatchdogResets;
-            minuteBuffer->s.version = strtol(VERSION, NULL, 16);
+            minuteBuffer->s.version = strtoll(VERSION, NULL, 16);
 
 
             memset(minuteBuffer->s.deviceId, 0, sizeof(minuteBuffer->s.deviceId));

cube/User/Src/networkAbstractionLayer.c

@@ -3,6 +3,7 @@
 #include <iwdg.h>
 #include <logger.h>
 #include <sinkStruct.h>
+#include <show.h>
 #include <config.h>
 
 #include <networkAbstractionLayer_impl.h>
@@ -14,12 +15,13 @@ static t_seconds seconds = { .seconds = 0, .missedUpdates = 0, .valid = false };
 static t_configBlock *config;
 
 
+
 static void networkSecondsHandler(void *handle) {
     static bool tryAgain = false;
 
     seconds.seconds += 1;
 
-    if (! seconds.valid) {
+    if (! seconds.valid && isNetworkAvailable()) {
         coloredMsg(LOG_YELLOW, "nsh, initially querying time");
         uint64_t tmpSeconds = networkSntpQuery();
         if (tmpSeconds != 0) {
@@ -27,6 +29,7 @@ static void networkSecondsHandler(void *handle) {
             seconds.seconds = tmpSeconds;
             seconds.missedUpdates = 0;
             seconds.valid = true;
+            show(LED_GREEN, ON);
         } else {
             coloredMsg(LOG_YELLOW, "nsh, failed");
             seconds.missedUpdates += 1;
@@ -38,6 +41,7 @@ static void networkSecondsHandler(void *handle) {
             coloredMsg(LOG_YELLOW, "nsh, success, network time is %lu", tmpSeconds);
             seconds.missedUpdates = 0;
             tryAgain = false;
+            show(LED_GREEN, ON);
             if (seconds.seconds != tmpSeconds) {
                 coloredMsg(LOG_YELLOW, "nsh, local time updated");
                 seconds.seconds = tmpSeconds;

cube/User/Src/networkAbstractionLayer_lan.c

@@ -1,16 +1,198 @@
+#include <stdint.h>
+#include <string.h>
+
 #include <networkAbstractionLayer_impl.h>
 #include <logger.h>
+#include <PontCoopScheduler.h>
 
 #include <wizHelper.h>
 #include <wizchip_conf.h>
 #include <socket.h>
+#include <config.h>
+#include <sntp.h>
+
+
+static t_configBlock *config;
 
 
 
-uint64_t networkSntpQuery() {
+static const uint64_t UNIX_NTP_EPOCH_DIFF = 2208988800;
-    return wizSntpQuery();
+static const uint16_t NTP_PORT = 123;
+static const uint16_t MAX_SNTP_RETRIES = 100;
+extern const uint8_t SNTP_SOCK;
+
+
+
+const uint8_t SEND_LI_VN_MODE = 0xe3; // LI: unknown (3), VN: 4, Mode: Client (3)
+typedef struct s_ntpStruct {
+    uint8_t   li_vn_mode;
+    uint8_t   stratum;
+    uint8_t   poll;
+    uint8_t   precision;
+    uint32_t  rootdelay;
+    uint32_t  rootdisp;
+    uint32_t  refid;
+    //uint64_t  reftime;
+    uint32_t reftime_h;
+    uint32_t reftime_l;
+    //uint64_t  org;
+    uint32_t org_h;
+    uint32_t org_l;
+    //uint64_t  rec;
+    uint32_t rec_h;
+    uint32_t rec_l;
+    //uint64_t  xmt;
+    uint32_t xmt_h;
+    uint32_t xmt_l;
+} t_ntpStruct;
+
+typedef union __attribute__((__packed__)) {
+    t_ntpStruct s;
+    uint8_t b[sizeof(t_ntpStruct)];
+} ntpMsg_t;
+
+typedef struct {
+    ntpMsg_t ntpMsg;
+    uint8_t ntpAddr[4];
+    uint16_t retryCount;
+    uint64_t seconds;
+    enum {
+        SNTP_STATE_IDLE,
+        SNTP_STATE_START, 
+        SNTP_STATE_SEND,
+        SNTP_STATE_RECV,
+        SNTP_STATE_DONE,
+        SNTP_STATE_ERROR
+    } sntpState;
+} sntpEngineHandle_t;
+
+sntpEngineHandle_t sntpEngineHandle = { 
+    .seconds = 0, 
+    .retryCount = 0, 
+    .sntpState = SNTP_STATE_IDLE 
+};
+
+
+void networkSntpEngine(void *handle) {
+    sntpEngineHandle_t *localHandle = (sntpEngineHandle_t*) handle;
+    if (isNetworkAvailable()) {
+        switch (localHandle->sntpState) {
+            case SNTP_STATE_START:
+                coloredMsg(LOG_BLUE, "nes, resolve ntp server");
+                if (! wizDnsQuery(config->ntpServer, localHandle->ntpAddr)) {
+                    coloredMsg(LOG_BLUE, "nes, failed to resolve ntp server");
+                    localHandle->sntpState = SNTP_STATE_ERROR;
+                } else {
+                    localHandle->sntpState = SNTP_STATE_SEND;
+                    schAdd(networkSntpEngine, (void*) localHandle, 10, 0);
+                }
+                break;
+            case SNTP_STATE_SEND:
+                coloredMsg(LOG_BLUE, "nes, about to call SNTP");
+                localHandle->retryCount = 0;
+                socket(SNTP_SOCK, Sn_MR_UDP, NTP_PORT, 0);
+                uint8_t sockState = getSn_SR(SNTP_SOCK);
+                if (sockState == SOCK_UDP) {
+                    memset(&(localHandle->ntpMsg), 0, sizeof(localHandle->ntpMsg));
+                    localHandle->ntpMsg.s.li_vn_mode = SEND_LI_VN_MODE;
+                    localHandle->ntpMsg.s.xmt_l = 1;
+                    sendto(SNTP_SOCK, localHandle->ntpMsg.b, 
+                           sizeof(localHandle->ntpMsg.b), localHandle->ntpAddr, NTP_PORT);
+                    coloredMsg(LOG_BLUE, "nes, sent");
+                    localHandle->sntpState = SNTP_STATE_RECV;
+                    schAdd(networkSntpEngine, (void*) localHandle, 100, 0);
+                } else {
+                    coloredMsg(LOG_BLUE, "nes, socket in unexpected state %d", sockState);
+                    localHandle->sntpState = SNTP_STATE_ERROR;
+                }
+                break;
+            case SNTP_STATE_RECV:
+                coloredMsg(LOG_BLUE, "nes, check receive");
+                localHandle->retryCount += 1;
+                uint16_t recvLen = getSn_RX_RSR(SNTP_SOCK);
+                if (recvLen == 0) {
+                    if (localHandle->retryCount > MAX_SNTP_RETRIES) {
+                        coloredMsg(LOG_BLUE, "nes, max retry count reached, failed");
+                        localHandle->sntpState = SNTP_STATE_ERROR;
+                    } else {
+                        coloredMsg(LOG_BLUE, "nes, nothing received yet, try again");
+                        schAdd(networkSntpEngine, (void*) localHandle, 100, 0);
+                    }
+                } else if (recvLen >= sizeof(localHandle->ntpMsg)) {
+                    memset(&(localHandle->ntpMsg), 0, sizeof(localHandle->ntpMsg));
+                    uint8_t srcAddr[4];
+                    uint16_t srcPort;
+                    
+                    recvfrom(SNTP_SOCK, localHandle->ntpMsg.b,
+                             sizeof(localHandle->ntpMsg.b), srcAddr, &srcPort);
+                    
+                    
+                    uint8_t *buf = localHandle->ntpMsg.b;
+                    uint8_t x = 0;
+                    coloredMsg(LOG_BLUE, "nes, %02x %02x %02x %02x %02x %02x %02x %02x  %02x %02x %02x %02x %02x %02x %02x %02x",
+                               buf[x+0], buf[x+1], buf[x+2], buf[x+3], buf[x+4], buf[x+5], buf[x+6], buf[x+7],
+                               buf[x+8], buf[x+9], buf[x+10], buf[x+11], buf[x+12], buf[x+13], buf[x+14], buf[x+15]);
+                    x += 16;
+                    coloredMsg(LOG_BLUE, "nes, %02x %02x %02x %02x %02x %02x %02x %02x  %02x %02x %02x %02x %02x %02x %02x %02x",
+                               buf[x+0], buf[x+1], buf[x+2], buf[x+3], buf[x+4], buf[x+5], buf[x+6], buf[x+7],
+                               buf[x+8], buf[x+9], buf[x+10], buf[x+11], buf[x+12], buf[x+13], buf[x+14], buf[x+15]);
+                    x += 16;
+                    coloredMsg(LOG_BLUE, "nes, %02x %02x %02x %02x %02x %02x %02x %02x  %02x %02x %02x %02x %02x %02x %02x %02x",
+                               buf[x+0], buf[x+1], buf[x+2], buf[x+3], buf[x+4], buf[x+5], buf[x+6], buf[x+7],
+                               buf[x+8], buf[x+9], buf[x+10], buf[x+11], buf[x+12], buf[x+13], buf[x+14], buf[x+15]);
+                    x += 16;
+                    coloredMsg(LOG_BLUE, "nes, %02x %02x %02x %02x %02x %02x %02x %02x  %02x %02x %02x %02x %02x %02x %02x %02x",
+                               buf[x+0], buf[x+1], buf[x+2], buf[x+3], buf[x+4], buf[x+5], buf[x+6], buf[x+7],
+                               buf[x+8], buf[x+9], buf[x+10], buf[x+11], buf[x+12], buf[x+13], buf[x+14], buf[x+15]);
+
+                    close(SNTP_SOCK);
+                    coloredMsg(LOG_BLUE, "nes, msg received from %d.%d.%d.%d:%d", 
+                               srcAddr[0], srcAddr[1], srcAddr[2], srcAddr[3],
+                               srcPort);
+                    
+                    coloredMsg(LOG_BLUE, "nes, received in the %d. cycles", localHandle->retryCount);
+                    uint32_t xmt_h = 
+                        (localHandle->ntpMsg.s.xmt_h & 0x0000000ff) << 24 |
+                        (localHandle->ntpMsg.s.xmt_h & 0x00000ff00) << 8 |
+                        (localHandle->ntpMsg.s.xmt_h & 0x000ff0000) >> 8 |
+                        (localHandle->ntpMsg.s.xmt_h & 0x0ff000000) >> 24;
+                    localHandle->seconds = ((uint64_t)xmt_h) - UNIX_NTP_EPOCH_DIFF;
+                    coloredMsg(LOG_BLUE, "nes, xmt: %08x", xmt_h);
+                    coloredMsg(LOG_BLUE, "nes, seconds: %lu", localHandle->seconds);
+                    localHandle->sntpState = SNTP_STATE_DONE;
+                } else {
+                    coloredMsg(LOG_BLUE, "nes, invalid number of octets received: %d", recvLen);
+                    localHandle->sntpState = SNTP_STATE_ERROR;
+                }
+                break;
+            default:
+                coloredMsg(LOG_BLUE, "nes, unexpected state");
+        }
+    } else {
+        coloredMsg(LOG_BLUE, "nes, no network yet, try again");
+        schAdd(networkSntpEngine, (void*) localHandle, 100, 0);
+    }
 }
 
+uint64_t networkSntpQuery() {
+    uint64_t res = 0;
+
+    if (sntpEngineHandle.sntpState == SNTP_STATE_IDLE) {
+        coloredMsg(LOG_BLUE, "nsq, start sntp request");
+        sntpEngineHandle.sntpState = SNTP_STATE_START;
+        schAdd(networkSntpEngine, (void*) &sntpEngineHandle, 1, 0);
+    } else if (sntpEngineHandle.sntpState == SNTP_STATE_DONE) {
+        coloredMsg(LOG_BLUE, "nsq, start sntp done");
+        res = sntpEngineHandle.seconds;
+        coloredMsg(LOG_BLUE, "nsq, time is %lu", res);
+        sntpEngineHandle.sntpState = SNTP_STATE_IDLE;
+    } else if (sntpEngineHandle.sntpState == SNTP_STATE_ERROR) {
+        coloredMsg(LOG_BLUE, "nsq, start sntp failed");
+        sntpEngineHandle.sntpState = SNTP_STATE_IDLE;
+    }
+
+    return res;
+}
 
 extern uint8_t SINK_SOCK;
 
@@ -38,6 +220,11 @@ int8_t networkUdpSend(char *hostname, uint16_t port, uint8_t *buf, uint16_t bufL
     return 1;
 }
 
+bool isNetworkAvailable() {
+    return wizIsNetworkAvailable();
+}
+
 void networkImplInit() {
+    config = getConfig();
     wizInit();
 }

cube/User/Src/show.c

@@ -1,6 +1,7 @@
 #include <main.h>
 #include <show.h>
 #include <PontCoopScheduler.h>
+#include <show.h>
 
 #include <stdint.h>
 #include <stdlib.h>
@@ -24,9 +25,20 @@ showElement_t showElement[] = {
 };
 
 static void showHandler(void *handle) {
+    const uint8_t MAX_CNT = 3;
+    static uint8_t cnt = 0;
+    cnt += 1;
+    if (cnt > MAX_CNT) {
+        cnt = 0;
+    }
+
     uint8_t idx = 0;
     while (showElement[idx].port) {
         if (showElement[idx].currentState == BLINK) {
+            if (cnt == MAX_CNT) {
+                HAL_GPIO_TogglePin(showElement[idx].port, showElement[idx].pin);
+            }
+        } else if (showElement[idx].currentState == BLINK_FAST) {
             HAL_GPIO_TogglePin(showElement[idx].port, showElement[idx].pin);
         }
         idx++;
@@ -43,5 +55,5 @@ void show(signalPin_t signalPin, signalAction_t action) {
 }
 
 void showInit() {
-    schAdd(showHandler, NULL, 0, 250);
+    schAdd(showHandler, NULL, 0, 100);
 }

cube/User/Src/wizHelper.c

@@ -26,18 +26,14 @@ static uint8_t dhcpBuffer[DHCP_BUFFER_SIZE];
 static uint8_t dnsBuffer[DNS_BUFFER_SIZE];
 
 
-static uint8_t sntpBuffer[MAX_SNTP_BUF_SIZE];
-const uint64_t UNIX_NTP_EPOCH_DIFF = 2208988800;
-
 
 extern const uint8_t DHCP_SOCK;
 extern const uint8_t DNS_SOCK;
-extern const uint8_t SNTP_SOCK;
 
 
 static bool networkAvailable = false;
 
-bool isNetworkAvailable() {
+bool wizIsNetworkAvailable() {
     return networkAvailable;
 }
 
@@ -90,7 +86,7 @@ static void wizDHCPAssign() {
     coloredMsg(LOG_BLUE, "wizda, set netinfo again");
 
     networkAvailable = true;
-    show(LED_GREEN, ON);
+    show(LED_GREEN, BLINK_FAST);
     coloredMsg(LOG_BLUE, "wizda, network is available");
 }
 
@@ -133,40 +129,6 @@ bool wizDnsQuery(char *name, uint8_t *ip) {
 }
 
 
-uint64_t wizSntpQuery() {
-    uint64_t seconds = 0;
-
-    if (networkAvailable) {
-        coloredMsg(LOG_BLUE, "wizsq, about to call SNTP");
-
-        uint8_t ntpServer[4];
-        if (wizDnsQuery(config->ntpServer, ntpServer)) {
-            SNTP_init(SNTP_SOCK, ntpServer, 0, sntpBuffer);
-            uint16_t cycles = 0;
-            uint32_t startTime = HAL_GetTick();
-            while (1) {
-                cycles += 1;
-                datetime curTime;
-                if (1 == SNTP_run(&curTime)) {
-                    seconds = curTime.seconds - UNIX_NTP_EPOCH_DIFF;
-                    coloredMsg(LOG_BLUE, "wizsq, cycles: %u, curTime: %lu", cycles, seconds);
-                    uint32_t stopTime = HAL_GetTick();
-                    coloredMsg(LOG_BLUE, "wizsq, duration: %u ms", stopTime - startTime);
-                    break;
-                }
-            }
-            
-            if (seconds == 0) {
-                coloredMsg(LOG_BLUE, "wizsq, time update failed");
-            }
-        } else {
-            coloredMsg(LOG_BLUE, "wizsq, error when querying ntp server name");
-        }
-    }
-    
-    return seconds;
-}
-
 static void wizPhyLinkHandler(void *handle) {
     // this handler is anyhow called with a 1s period, so we reuse it for the DNS timer
     DNS_time_handler();

cube/cube.ioc

@@ -13,39 +13,35 @@ Mcu.IP4=SPI2
 Mcu.IP5=SYS
 Mcu.IP6=TIM1
 Mcu.IP7=USART1
-Mcu.IP8=USART2
+Mcu.IPNb=8
-Mcu.IPNb=9
 Mcu.Name=STM32F103C(8-B)Tx
 Mcu.Package=LQFP48
 Mcu.Pin0=PC13-TAMPER-RTC
 Mcu.Pin1=PC14-OSC32_IN
-Mcu.Pin10=PA6
+Mcu.Pin10=PB11
-Mcu.Pin11=PA7
+Mcu.Pin11=PB12
-Mcu.Pin12=PB10
+Mcu.Pin12=PB13
-Mcu.Pin13=PB11
+Mcu.Pin13=PB14
-Mcu.Pin14=PB12
+Mcu.Pin14=PB15
-Mcu.Pin15=PB13
+Mcu.Pin15=PA8
-Mcu.Pin16=PB14
+Mcu.Pin16=PA9
-Mcu.Pin17=PB15
+Mcu.Pin17=PA10
-Mcu.Pin18=PA8
+Mcu.Pin18=PA12
-Mcu.Pin19=PA9
+Mcu.Pin19=PA13
 Mcu.Pin2=PC15-OSC32_OUT
-Mcu.Pin20=PA10
+Mcu.Pin20=PA14
-Mcu.Pin21=PA12
+Mcu.Pin21=PB5
-Mcu.Pin22=PA13
+Mcu.Pin22=PB6
-Mcu.Pin23=PA14
+Mcu.Pin23=VP_IWDG_VS_IWDG
-Mcu.Pin24=PB5
+Mcu.Pin24=VP_SYS_VS_Systick
-Mcu.Pin25=PB6
-Mcu.Pin26=VP_IWDG_VS_IWDG
-Mcu.Pin27=VP_SYS_VS_Systick
 Mcu.Pin3=PD0-OSC_IN
 Mcu.Pin4=PD1-OSC_OUT
-Mcu.Pin5=PA1
+Mcu.Pin5=PA4
-Mcu.Pin6=PA2
+Mcu.Pin6=PA5
-Mcu.Pin7=PA3
+Mcu.Pin7=PA6
-Mcu.Pin8=PA4
+Mcu.Pin8=PA7
-Mcu.Pin9=PA5
+Mcu.Pin9=PB10
-Mcu.PinsNb=28
+Mcu.PinsNb=25
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=eepromSpi,hspi1;etherSpi,hspi2;debugUart,huart1;mainsCnt,htim1
 Mcu.UserName=STM32F103C8Tx
@@ -65,10 +61,6 @@ NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
 NVIC.TIM1_CC_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.USART1_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PA1.GPIOParameters=GPIO_Label
-PA1.GPIO_Label=MODEM_RES
-PA1.Locked=true
-PA1.Signal=GPIO_Output
 PA10.GPIOParameters=GPIO_Label
 PA10.GPIO_Label=Debug_RX
 PA10.Mode=Asynchronous
@@ -80,14 +72,6 @@ PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
 PA14.Signal=SYS_JTCK-SWCLK
-PA2.GPIOParameters=GPIO_Label
-PA2.GPIO_Label=MODEM_TX
-PA2.Mode=Asynchronous
-PA2.Signal=USART2_TX
-PA3.GPIOParameters=GPIO_Label
-PA3.GPIO_Label=MODEM_RX
-PA3.Mode=Asynchronous
-PA3.Signal=USART2_RX
 PA4.GPIOParameters=GPIO_Label
 PA4.GPIO_Label=EEPROM_CS
 PA4.Locked=true
@@ -187,7 +171,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=Makefile
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI1_Init-SPI1-false-HAL-true,4-MX_SPI2_Init-SPI2-false-HAL-true,5-MX_TIM1_Init-TIM1-false-HAL-true,6-MX_USART1_UART_Init-USART1-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI1_Init-SPI1-false-HAL-true,4-MX_SPI2_Init-SPI2-false-HAL-true,5-MX_TIM1_Init-TIM1-false-HAL-true,6-MX_USART1_UART_Init-USART1-false-HAL-true,7-MX_IWDG_Init-IWDG-false-HAL-true,8-MX_USART2_UART_Init-USART2-false-HAL-true
 RCC.ADCFreqValue=36000000
 RCC.AHBFreq_Value=72000000
 RCC.APB1CLKDivider=RCC_HCLK_DIV2
@@ -230,8 +214,6 @@ TIM1.IPParameters=Channel-Input_Capture1_from_TI1,Prescaler,ClockDivision
 TIM1.Prescaler=13
 USART1.IPParameters=VirtualMode
 USART1.VirtualMode=VM_ASYNC
-USART2.IPParameters=VirtualMode
-USART2.VirtualMode=VM_ASYNC
 VP_IWDG_VS_IWDG.Mode=IWDG_Activate
 VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
 VP_SYS_VS_Systick.Mode=SysTick

docs/test1.txt

@@ -0,0 +1,8 @@
+24 02 03 e9 00 00 06 86  00 00 02 cc c0 a8 64 0f
+e3 e6 85 7c b7 79 4a eb  00 00 00 00 00 00 00 00
+e3 e6 86 b4 cb 75 ef d3  e3 e6 86 b4 cb 7c 22 82
+00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
+
+1614546999
+
+2208988800

sink/.gitignore

@@ -1 +0,0 @@
-build/

sink/Makefile

@@ -1,42 +0,0 @@
-BUILD_DIR = build
-
-C_SOURCES = \
-../cube/User/Src/sha256.c \
-sink20169.c \
-logging.c
-
-
-C_INCLUDES = \
--I. \
--I../cube/User/Inc
-
-VERSION := $(shell git rev-parse --short=8 HEAD)
-
-CC = gcc
-CFLAGS = $(C_INCLUDES) -Wall -Werror -std=c99 -DVERSION="\"$(VERSION)\""
-LDFLAGS = -lconfig -lcurl
-TARGET = sink20169
-
-UNAME_S := $(shell uname -s)
-ifeq ($(UNAME_S),OpenBSD)
-  CFLAGS += -I/usr/local/include -DOpenBSD=1
-  LDFLAGS += -L/usr/local/lib
-endif
-
-all: $(BUILD_DIR)/$(TARGET)
-
-OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
-vpath %.c $(sort $(dir $(C_SOURCES)))
-
-$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
-	$(CC) -c $(CFLAGS) $< -o $@
-
-$(BUILD_DIR)/$(TARGET): $(OBJECTS) Makefile
-	$(CC) $(OBJECTS) $(LDFLAGS) -o $@
-
-$(BUILD_DIR):
-	mkdir $@
-
-.phony: clean
-clean:
-	-rm -rf $(BUILD_DIR)

sink/logging.c

@@ -1,53 +0,0 @@
-#define _DEFAULT_SOURCE
-
-#include <syslog.h>
-#include <stdarg.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include <string.h>
-
-extern bool verbose;
-int facility = LOG_LOCAL0;
-
-void setfacility(const char *facility_p) {
-  if (! strcmp(facility_p, "LOCAL0")) {
-    facility = LOG_LOCAL0;
-  } else if (! strcmp(facility_p, "LOCAL1")) {
-    facility = LOG_LOCAL1;
-  } else if (! strcmp(facility_p, "LOCAL2")) {
-    facility = LOG_LOCAL2;
-  } else if (! strcmp(facility_p, "LOCAL3")) {
-    facility = LOG_LOCAL3;
-  } else if (! strcmp(facility_p, "LOCAL4")) {
-    facility = LOG_LOCAL4;
-  } else if (! strcmp(facility_p, "LOCAL5")) {
-    facility = LOG_LOCAL5;
-  } else if (! strcmp(facility_p, "LOCAL6")) {
-    facility = LOG_LOCAL6;
-  } else if (! strcmp(facility_p, "LOCAL7")) {
-    facility = LOG_LOCAL7;
-  } else if (! strcmp(facility_p, "USER")) {
-    facility = LOG_USER;
-  } else if (! strcmp(facility_p, "DAEMON")) {
-    facility = LOG_DAEMON;
-  }
-}
-
-
-void logmsg(int prio, const char* format, ...) {
-  va_list vl;
-  char buf[1024];
-
-  va_start(vl, format);
-  vsnprintf(buf, sizeof(buf), format, vl);
-  va_end(vl);
-
-  if (verbose) {
-    printf("%s\n", buf);
-  }
-
-  openlog("counter", 0, facility);
-  syslog(prio, "%s", buf);
-  closelog();
-}
-

sink/logging.h

@@ -1,8 +0,0 @@
-#ifndef _LOGGING_H_
-#define _LOGGING_H_
-
-#include <syslog.h>
-
-void logmsg(int prio, const char* format, ...);
-void setfacility(const char *facility_p);
-#endif // _LOGGING_H_

sink/readme.md

@@ -1,3 +0,0 @@
-Make sure libconfig and libcurl are available.
-On Linux (Debian) install libconfig-dev and libcurl4-openssl-dev,
-on OpenBSD install libconfig and curl.

sink/sink20169.c

@@ -1,423 +0,0 @@
-#define _DEFAULT_SOURCE
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdbool.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <string.h>
-#include <getopt.h>
-#include <pwd.h>
-
-#include <libconfig.h>
-#include <curl/curl.h>
-
-#include <sinkStruct.h>
-#include <logging.h>
-#include <sha256.h>
-
-
-const char DEFAULT_CONFIG_FILENAME[] = "./sink20169.cfg";
-
-typedef struct {
-    const char *deviceId;
-    const char *location;
-    const char *sharedSecret;
-} t_device;
-
-typedef struct {
-    config_t cfg;
-    uint16_t numOfDevices;
-    t_device *devices;    
-} t_configHandle;
-
-typedef struct {
-    t_configHandle *configHandle;
-    int receiveSockFd;
-} t_receiverHandle;
-
-typedef struct {
-    t_configHandle *configHandle;
-    const char *influxUser;
-    const char *influxPass;
-    const char *influxServer;
-    uint16_t influxPort;
-    const char *influxDatabase;
-    const char *influxMeasurement;
-    char influxUrl[1024];
-} t_forwarderHandle;
-
-bool verbose = false;
-
-
-int initConfig(const char *configFilename, t_configHandle *configHandle) {
-    configHandle->numOfDevices = 0;
-    configHandle->devices = NULL;
-
-    config_init(&(configHandle->cfg));
-    if (! config_read_file(&(configHandle->cfg), configFilename)) {
-        logmsg(LOG_ERR, "failed to read config file: %s:%d - %s\n",
-            config_error_file(&(configHandle->cfg)), config_error_line(&(configHandle->cfg)),
-            config_error_text(&(configHandle->cfg)));
-        config_destroy(&(configHandle->cfg));
-        return -1;
-    }
-
-    config_setting_t *devicesConfig = config_lookup(&(configHandle->cfg), "devices");
-    if (devicesConfig == NULL) {
-        logmsg(LOG_ERR, "receiver: no devices configuration found");
-        return -2;
-    }
-    configHandle->numOfDevices = config_setting_length(devicesConfig);
-    configHandle->devices = (t_device*) malloc(configHandle->numOfDevices * sizeof(t_device));
-    for (uint16_t i = 0; i < configHandle->numOfDevices; i++) {
-        config_setting_t *deviceConfig = config_setting_get_elem(devicesConfig, i);
-        if (! config_setting_lookup_string(deviceConfig, "deviceId", &(configHandle->devices[i].deviceId))) {
-            logmsg(LOG_ERR, "no deviceId for device %d", i);
-            return -3;
-        }
-        if (! config_setting_lookup_string(deviceConfig, "location", &(configHandle->devices[i].location))) {
-            logmsg(LOG_ERR, "no location for device %d", i);
-            return -4;
-        }
-        if (! config_setting_lookup_string(deviceConfig, "sharedSecret", &(configHandle->devices[i].sharedSecret))) {
-            logmsg(LOG_ERR, "no sharedSecret for device %d", i);
-            return -5;
-        }
-        if (strlen(configHandle->devices[i].sharedSecret) >= SHA256_BLOCK_SIZE) {
-            logmsg(LOG_ERR, "Configured sharedsecret for device %d is too long", i);
-            return -6;
-        }
-        logmsg(LOG_INFO, "Device loaded: %d %s %s %s", i, 
-               configHandle->devices[i].deviceId, 
-               configHandle->devices[i].location, 
-               configHandle->devices[i].sharedSecret);
-    }
-
-    return 0;
-}
-
-void deinitConfig(t_configHandle *configHandle) {
-    config_destroy(&(configHandle->cfg));
-    if (configHandle->devices) {
-        free(configHandle->devices);
-        configHandle->devices = NULL;
-    }
-}
-
-t_device *findDevice(t_configHandle *configHandle, char *deviceId) {
-    for (uint16_t i = 0; i < configHandle->numOfDevices; i++) {
-        if (! strcmp(configHandle->devices[i].deviceId, deviceId)) {
-            return &(configHandle->devices[i]);
-        }
-    }
-    return NULL;
-}
-
-int initReceiver(t_configHandle *configHandle, t_receiverHandle *handle) {
-    handle->configHandle = configHandle;
-
-    struct sockaddr_in servaddr;
-
-    handle->receiveSockFd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (handle->receiveSockFd == -1) {
-        logmsg(LOG_ERR, "failed to create receive socket: %d", errno);
-        return -1;
-    }
-
-    int receivePort = 20169;
-    config_lookup_int(&(configHandle->cfg), "receivePort", &receivePort);
-    if (receivePort < 1 || receivePort > 65535) {
-        logmsg(LOG_ERR, "illegal receive port configured");
-        return -2;
-    }
-
-    memset(&servaddr, 0, sizeof(servaddr));
-    servaddr.sin_family = AF_INET;
-    servaddr.sin_addr.s_addr = htonl(INADDR_ANY);
-    servaddr.sin_port = htons(receivePort);
-
-    if (-1 == bind(handle->receiveSockFd, (const struct sockaddr *) &servaddr, sizeof(servaddr))) {
-        logmsg(LOG_ERR, "unable to bind receive: %d", errno);
-        return -3;
-    }
-    return 0;
-}
-
-void deinitReceiver(t_receiverHandle *handle) {
-    close(handle->receiveSockFd);
-}
-
-int receiveAndVerifyMinuteBuffer(t_receiverHandle *handle, t_minuteBuffer *buf) {
-    struct sockaddr_in cliaddr;
-    socklen_t cliaddrlen = sizeof(cliaddr);
-
-    int n = recvfrom(handle->receiveSockFd, buf->b, sizeof(buf->b), MSG_TRUNC,
-                     (struct sockaddr *) &cliaddr, &cliaddrlen);
-    logmsg(LOG_INFO, "received %d octets from %d.%d.%d.%d", 
-           n, 
-           (cliaddr.sin_addr.s_addr & 0x0ff), 
-           ((cliaddr.sin_addr.s_addr >> 8) & 0x0ff), 
-           ((cliaddr.sin_addr.s_addr >> 16) & 0x0ff), 
-           ((cliaddr.sin_addr.s_addr >> 24) & 0x0ff));
-
-    if (n != sizeof(buf->b)) {
-        logmsg(LOG_INFO, "Illegal packet size: %d", n);
-        return -1;
-    }
-
-    t_device *device = findDevice(handle->configHandle, buf->s.deviceId);    
-    const char *sharedSecret = device->sharedSecret;
-
-    uint8_t receivedHash[SHA256_BLOCK_SIZE];
-    memcpy(receivedHash, buf->s.hash, SHA256_BLOCK_SIZE);
-    memcpy(buf->s.hash, sharedSecret, SHA256_BLOCK_SIZE);
-
-    SHA256_CTX ctx;
-    uint8_t calculatedHash[SHA256_BLOCK_SIZE];
-    sha256_init(&ctx);
-    sha256_update(&ctx, buf->b, sizeof(buf->b));
-    sha256_final(&ctx, calculatedHash);
-
-    if (memcmp(receivedHash, calculatedHash, SHA256_BLOCK_SIZE) != 0) {
-        logmsg(LOG_INFO, "Invalid hash in msg for device %s", buf->s.deviceId);
-        return -5;
-    }
-
-    return 0;
-}
-
-
-int initForwarder(t_configHandle *configHandle, t_forwarderHandle *handle) {
-    handle->configHandle = configHandle;
-
-    handle->influxUser = NULL;
-    handle->influxPass = NULL;
-    handle->influxServer = NULL;
-    handle->influxDatabase = NULL;
-    handle->influxMeasurement = NULL;
-
-    config_lookup_string(&(configHandle->cfg), "influxUser", &(handle->influxUser));
-    config_lookup_string(&(configHandle->cfg), "influxPass", &(handle->influxPass));
-    config_lookup_string(&(configHandle->cfg), "influxServer", &(handle->influxServer));
-    config_lookup_string(&(configHandle->cfg), "influxDatabase", &(handle->influxDatabase));
-    config_lookup_string(&(configHandle->cfg), "influxMeasurement", &(handle->influxMeasurement));
-
-    int influxPort = 8086;
-    config_lookup_int(&(configHandle->cfg), "influxPort", &influxPort);
-    if (influxPort < 1 || influxPort > 65535) {
-        logmsg(LOG_ERR, "illegal influx port configured");
-        return -2;
-    }
-    handle->influxPort = influxPort;
-
-    if (! handle->influxServer) {
-        logmsg(LOG_ERR, "no influxServer configured");
-        return -1;
-    }
-    if (! handle->influxDatabase) {
-        logmsg(LOG_ERR, "no influxDatabase configured");
-        return -2;
-    }
-    if (! handle->influxMeasurement) {
-        logmsg(LOG_ERR, "no influxMeasurement configured");
-        return -3;
-    }
-
-    int res = snprintf(handle->influxUrl, sizeof(handle->influxUrl),
-                       "http://%s:%d/write?db=%s&precision=s",
-                       handle->influxServer, handle->influxPort, handle->influxDatabase);
-    if (res > sizeof(handle->influxUrl)) {
-        logmsg(LOG_ERR, "influxUrl has not enough space");
-        return -4;
-    }
-    logmsg(LOG_INFO, "influxUrl is %s", handle->influxUrl);
-
-    return 0;
-}
-
-void deinitForwarder(t_forwarderHandle *handle) {
-
-}
-
-int httpPostRequest(char *url, const char *user, const char *pass, char *payload) {
-    CURL *curl = curl_easy_init();
-    if (! curl) {
-        logmsg(LOG_ERR, "error instantiating curl");
-        return -1;
-    }
-
-    curl_easy_setopt(curl, CURLOPT_URL, url);
-    if (user && pass) {
-        curl_easy_setopt(curl, CURLOPT_HTTPAUTH, CURLAUTH_DIGEST);
-        curl_easy_setopt(curl, CURLOPT_USERNAME, user);
-        curl_easy_setopt(curl, CURLOPT_PASSWORD, pass);
-    }
-    curl_easy_setopt(curl, CURLOPT_POSTFIELDS, payload);
-
-    CURLcode res = curl_easy_perform(curl);
-    if (res != CURLE_OK) {
-        logmsg(LOG_ERR, "post request failed: %s", curl_easy_strerror(res));
-        return -2;
-    }
-
-    curl_easy_cleanup(curl);
-
-    return 0;
-}
-
-int forwardMinuteBuffer(t_forwarderHandle *handle, t_minuteBuffer *buf) {
-    logmsg(LOG_INFO, "D: %s, R: %u, P: %u, W: %u, V: %08x", 
-           buf->s.deviceId, buf->s.totalRunningHours, buf->s.totalPowercycles, buf->s.totalWatchdogResets,
-           buf->s.version);
-           
-    t_device *device = findDevice(handle->configHandle, buf->s.deviceId);
-    const char *location = device->location;
-
-    for (uint8_t j = 0; j < SECONDS_PER_MINUTE; j++) {
-        uint64_t timestamp = buf->s.timestamp + j;
-        logmsg(LOG_DEBUG, "Time: %lu, Frequency: %u", timestamp, buf->s.frequency[j]);
-
-        int frequency_before_point = buf->s.frequency[j] / 1000;
-        int frequency_behind_point = buf->s.frequency[j] - (frequency_before_point * 1000);
-
-        char payload[256];
-        int res = snprintf(payload, sizeof(payload),
-                           "%s,valid=1,location=%s,host=%s freq=%d.%03d"
-#ifdef OpenBSD
-                           " %llu"
-#else
-                           " %lu"
-#endif                                                      
-                           "",
-                           handle->influxMeasurement, location, buf->s.deviceId, 
-                           frequency_before_point, frequency_behind_point, 
-                           timestamp);
-        if (res > sizeof(payload)) {
-            logmsg(LOG_ERR, "payload buffer to small");
-            return -1;
-        }
-        logmsg(LOG_DEBUG, "Payload: %s", payload);
-        res = httpPostRequest(handle->influxUrl, handle->influxUser, handle->influxPass, payload);
-        if (res == 0) {
-            logmsg(LOG_DEBUG, "Successfully sent to InfluxDB");
-        }
-    }
-
-    logmsg(LOG_INFO, "Successfully sent whole minute to InfluxDB");
-    return 0;
-}
-
-void usage() {
-    printf("sinkserver for mainsfrequency counter\n");
-    printf("https://home.hottis.de/gitlab/wolutator/mains-frequency-counter-stm32\n");
-    printf("Version: " VERSION "\n");
-    printf("\nUsage\n");
-    printf("  -f FILENAME R..... Config file to be used\n");
-    printf("  -v ............... Verbose, writes all logging on stdout too\n");
-    printf("  -s FACILITY ...... Sets syslog facility, only LOCAL[0..7]\n");
-    printf("                     USER and DAEMON are supported\n");
-    printf("  -n USER .......... If started as root drop privileges and become\n");
-    printf("                     USER\n");
-    printf("  -b ............... fork into background\n");
-    printf("  -h ............... This help\n");
-}
-
-int main(int argc, char **argv) {
-    t_configHandle configHandle;
-    t_forwarderHandle forwarderHandle;
-    t_receiverHandle receiverHandle;
-
-
-    const char *configFilename = DEFAULT_CONFIG_FILENAME;
-    const char *dropPrivilegesToUser = NULL;
-    bool doFork = false;
-
-    int c;
-    while ((c = getopt(argc, argv, "f:vs:hn:b")) != -1) {
-        switch (c) {
-            case 'f':
-                configFilename = strdup(optarg);
-                break;
-            case 'v':
-                verbose = true;
-                break;
-            case 's':
-                setfacility(optarg);
-                break;
-            case 'n':
-                dropPrivilegesToUser = strdup(optarg);
-                break;
-            case 'b':
-                doFork = true;
-                break;
-            case 'h':
-                usage();
-                exit(0);
-                break;
-        }
-    }
-
-    if ((getuid() == 0) && (dropPrivilegesToUser != NULL)) {
-        logmsg(LOG_INFO, "dropping root privileges, become %s", dropPrivilegesToUser);
-        struct passwd *userEntry = getpwnam(dropPrivilegesToUser);
-        if (userEntry == NULL) {
-            logmsg(LOG_ERR, "can not find entry for user %s", dropPrivilegesToUser);
-            exit(1);
-        }        
-
-        if (setuid(userEntry->pw_uid) != 0) {
-            logmsg(LOG_ERR, "unable to drop root privileges to %d", userEntry->pw_uid);
-            exit(2);
-        }
-    }
-
-    if (0 != initConfig(configFilename, &configHandle)) {
-        logmsg(LOG_ERR, "error when reading configuration");
-        exit(3);
-    }
-    
-    if (doFork) {
-        int pid = fork();
-        if (pid == -1) {
-            logmsg(LOG_ERR, "error when forking into background: %d", errno);
-            exit(4);
-        }
-        if (pid != 0) {
-            logmsg(LOG_INFO, "successfully forking into background, child's pid is %d", pid);
-            exit(0);
-        }
-    }
-
-    if (0 != initReceiver(&configHandle, &receiverHandle)) {
-        logmsg(LOG_ERR, "error when initializing receiver");
-        exit(5);
-    }
-
-    if (0 != initForwarder(&configHandle, &forwarderHandle)) {
-        logmsg(LOG_ERR, "error when initializing forwarder");
-        exit(6);
-    }
-
-
-    while (1) {
-        t_minuteBuffer buf;
-        
-        if (receiveAndVerifyMinuteBuffer(&receiverHandle, &buf) < 0) {
-            logmsg(LOG_ERR, "error in receiveAndVerify");
-            continue;
-        }
-
-        if (forwardMinuteBuffer(&forwarderHandle, &buf) < 0) {
-            logmsg(LOG_ERR, "error in send");
-        }
-    }
-
-
-    deinitForwarder(&forwarderHandle);
-    deinitReceiver(&receiverHandle);
-    deinitConfig(&configHandle);
-}

sink/sink20169.cfg

@@ -1,18 +0,0 @@
-// influxUser = "";
-// influxPass = "";
-influxServer = "172.16.10.16";
-influxPort = 8086;
-influxDatabase = "smarthome2";
-influxMeasurement = "mainsfrequency";
-
-receivePort = 20169;
-
-devices = (
-    {
-        deviceId = "MainsCnt01";
-        // sharedSecret must have exactly 31 characters
-        sharedSecret = "Uj6*uKDp@8Kvfa4g5eRMLUfVsSuqjxW";
-        // location must neither contains spaces nor commas or any other URL-special characters
-        location = "Essen_DE";
-    }
-);

tools/ENV.tmpl

@@ -0,0 +1,2 @@
+export PRIVATETOKEN=privateToken
+

tools/release.sh

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+RELEASENAME=$1
+RELEASETAG=$2
+DESCRIPTION=$3
+
+if [ "$RELEASENAME" = "" -o "$RELEASETAG" = "" -o "$DESCRIPTION" = "" ]; then
+  echo "release.sh RELEASENAME RELEASETAG DESCRIPTION"
+  exit 1
+fi
+
+RELEASETAGTARGET=`git rev-parse --short=8 HEAD`
+
+gitlabreleaseuploader.py \
+  --privateToken $PRIVATETOKEN \
+  --projectId 128 \
+  --projectUrl https://home.hottis.de/gitlab/wolutator/mains-frequency-counter-stm32 \
+  --releaseName "$RELEASENAME" \
+  --createRelease \
+  --releaseTag $RELEASETAG \
+  --releaseTagTarget $RELEASETAGTARGET \
+  --createReleaseTag \
+  --description "$DESCRIPTION" \
+  --instanceUrl https://home.hottis.de/gitlab \
+  --verbose \
+  --file cube/build/cube.elf
+