Add LICENSE

verify_worker - it was a lot easier and I got the cache for free.

CVSROOT/checkoutlist

@@ -0,0 +1,13 @@
+# The "checkoutlist" file is used to support additional version controlled
+# administrative files in $CVSROOT/CVSROOT, such as template files.
+#
+# The first entry on a line is a filename which will be checked out from
+# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
+# The remainder of the line is an error message to use if the file cannot
+# be checked out.
+#
+# File format:
+#
+#	[<whitespace>]<filename>[<whitespace><error message>]<end-of-line>
+#
+# comment lines begin with '#'

CVSROOT/commitinfo

@@ -0,0 +1,15 @@
+# The "commitinfo" file is used to control pre-commit checks.
+# The filter on the right is invoked with the repository and a list 
+# of files to check.  A non-zero exit of the filter program will 
+# cause the commit to be aborted.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being committed to, relative
+# to the $CVSROOT.  For the first match that is found, then the remainder
+# of the line is the name of the filter to run.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".

CVSROOT/config

@@ -0,0 +1,21 @@
+# Set this to "no" if pserver shouldn't check system users/passwords
+#SystemAuth=no
+
+# Put CVS lock files in this directory rather than directly in the repository.
+#LockDir=/var/lock/cvs
+
+# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
+# level of the new working directory when using the `cvs checkout'
+# command.
+#TopLevelAdmin=no
+
+# Set `LogHistory' to `all' or `TOEFWUPCGMAR' to log all transactions to the
+# history file, or a subset as needed (ie `TMAR' logs all write operations)
+#LogHistory=TOEFWUPCGMAR
+
+# Set `RereadLogAfterVerify' to `always' (the default) to allow the verifymsg
+# script to change the log message.  Set it to `stat' to force CVS to verify# that the file has changed before reading it (this can take up to an extra
+# second per directory being committed, so it is not recommended for large
+# repositories.  Set it to `never' (the previous CVS behavior) to prevent
+# verifymsg scripts from changing the log message.
+#RereadLogAfterVerify=always

CVSROOT/cvswrappers

@@ -0,0 +1,19 @@
+# This file affects handling of files based on their names.
+#
+# The -m option specifies whether CVS attempts to merge files.
+#
+# The -k option specifies keyword expansion (e.g. -kb for binary).
+#
+# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
+#
+#  wildcard	[option value][option value]...
+#
+#  where option is one of
+#  -f		from cvs filter		value: path to filter
+#  -t		to cvs filter		value: path to filter
+#  -m		update methodology	value: MERGE or COPY
+#  -k		expansion mode		value: b, o, kkv, &c
+#
+#  and value is a single-quote delimited value.
+# For example:
+#*.gif -k 'b'

CVSROOT/editinfo

@@ -0,0 +1,21 @@
+# The "editinfo" file is used to allow verification of logging
+# information.  It works best when a template (as specified in the
+# rcsinfo file) is provided for the logging procedure.  Given a
+# template with locations for, a bug-id number, a list of people who
+# reviewed the code before it can be checked in, and an external
+# process to catalog the differences that were code reviewed, the
+# following test can be applied to the code:
+#
+#   Making sure that the entered bug-id number is correct.
+#   Validating that the code that was reviewed is indeed the code being
+#       checked in (using the bug-id number or a seperate review
+#       number to identify this particular code set.).
+#
+# If any of the above test failed, then the commit would be aborted.
+#
+# Actions such as mailing a copy of the report to each reviewer are
+# better handled by an entry in the loginfo file.
+#
+# One thing that should be noted is the the ALL keyword is not
+# supported.  There can be only one entry that matches a given
+# repository.

CVSROOT/loginfo

@@ -0,0 +1,27 @@
+# The "loginfo" file controls where "cvs commit" log information
+# is sent.  The first entry on a line is a regular expression which must match
+# the directory that the change is being made to, relative to the
+# $CVSROOT.  If a match is found, then the remainder of the line is a filter
+# program that should expect log information on its standard input.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name ALL appears as a regular expression it is always used
+# in addition to the first matching regex or DEFAULT.
+#
+# You may specify a format string as part of the
+# filter.  The string is composed of a `%' followed
+# by a single format character, or followed by a set of format
+# characters surrounded by `{' and `}' as separators.  The format
+# characters are:
+#
+#   s = file name
+#   V = old version number (pre-checkin)
+#   v = new version number (post-checkin)
+#   t = tag or branch name
+#
+# For example:
+#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
+# or
+#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog

CVSROOT/modules

@@ -0,0 +1,26 @@
+# Three different line formats are valid:
+#	key	-a    aliases...
+#	key [options] directory
+#	key [options] directory files...
+#
+# Where "options" are composed of:
+#	-i prog		Run "prog" on "cvs commit" from top-level of module.
+#	-o prog		Run "prog" on "cvs checkout" of module.
+#	-e prog		Run "prog" on "cvs export" of module.
+#	-t prog		Run "prog" on "cvs rtag" of module.
+#	-u prog		Run "prog" on "cvs update" of module.
+#	-d dir		Place module in directory "dir" instead of module name.
+#	-l		Top-level directory only -- do not recurse.
+#
+# NOTE:  If you change any of the "Run" options above, you'll have to
+# release and re-checkout any working directories of these modules.
+#
+# And "directory" is a path to a directory relative to $CVSROOT.
+#
+# The "-a" option specifies an alias.  An alias is interpreted as if
+# everything on the right of the "-a" had been typed on the command line.
+#
+# You can encode a module within a module by using the special '&'
+# character to interpose another module into the current module.  This
+# can be useful for creating a module that consists of many directories
+# spread out over the entire source repository.

CVSROOT/notify

@@ -0,0 +1,12 @@
+# The "notify" file controls where notifications from watches set by
+# "cvs watch add" or "cvs edit" are sent.  The first entry on a line is
+# a regular expression which is tested against the directory that the
+# change is being made to, relative to the $CVSROOT.  If it matches,
+# then the remainder of the line is a filter program that should contain
+# one occurrence of %s for the user to notify, and information on its
+# standard input.
+#
+# "ALL" or "DEFAULT" can be used in place of the regular expression.
+#
+# For example:
+#ALL mail -s "CVS notification" %s

CVSROOT/rcsinfo

@@ -0,0 +1,13 @@
+# The "rcsinfo" file is used to control templates with which the editor
+# is invoked on commit and import.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being made to, relative to the
+# $CVSROOT.  For the first match that is found, then the remainder of the
+# line is the name of the file that contains the template.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".

CVSROOT/taginfo

@@ -0,0 +1,20 @@
+# The "taginfo" file is used to control pre-tag checks.
+# The filter on the right is invoked with the following arguments:
+#
+# $1 -- tagname
+# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
+# $3 -- repository
+# $4->  file revision [file revision ...]
+#
+# A non-zero exit of the filter program will cause the tag to be aborted.
+#
+# The first entry on a line is a regular expression which is tested
+# against the directory that the change is being committed to, relative
+# to the $CVSROOT.  For the first match that is found, then the remainder
+# of the line is the name of the filter to run.
+#
+# If the repository name does not match any of the regular expressions in this
+# file, the "DEFAULT" line is used, if it is specified.
+#
+# If the name "ALL" appears as a regular expression it is always used
+# in addition to the first matching regex or "DEFAULT".

CVSROOT/verifymsg

@@ -0,0 +1,21 @@
+# The "verifymsg" file is used to allow verification of logging
+# information.  It works best when a template (as specified in the
+# rcsinfo file) is provided for the logging procedure.  Given a
+# template with locations for, a bug-id number, a list of people who
+# reviewed the code before it can be checked in, and an external
+# process to catalog the differences that were code reviewed, the
+# following test can be applied to the code:
+#
+#   Making sure that the entered bug-id number is correct.
+#   Validating that the code that was reviewed is indeed the code being
+#       checked in (using the bug-id number or a seperate review
+#       number to identify this particular code set.).
+#
+# If any of the above test failed, then the commit would be aborted.
+#
+# Actions such as mailing a copy of the report to each reviewer are
+# better handled by an entry in the loginfo file.
+#
+# One thing that should be noted is the the ALL keyword is not
+# supported.  There can be only one entry that matches a given
+# repository.

LICENSE

@@ -0,0 +1,339 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc., <http://fsf.org/>
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+                            NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    smmapdfw
+    Copyright (C) 2020  Wolfgang Hottgenroth
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  {signature of Ty Coon}, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.

pgworker/.in

@@ -0,0 +1,139 @@
+/* .in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the <cfg.h> header file. */
+#undef HAVE_CFG_H
+
+/* Define to 1 if you have the <containers_public.h> header file. */
+#undef HAVE_CONTAINERS_PUBLIC_H
+
+/* Define to 1 if you have the <count.h> header file. */
+#undef HAVE_COUNT_H
+
+/* Define to 1 if you have the `findcfgl' function. */
+#undef HAVE_FINDCFGL
+
+/* Define to 1 if you have the `findcfglx' function. */
+#undef HAVE_FINDCFGLX
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define to 1 if you have the `htmalloc' function. */
+#undef HAVE_HTMALLOC
+
+/* Define to 1 if you have the <htmalloc.h> header file. */
+#undef HAVE_HTMALLOC_H
+
+/* Define to 1 if you have the `htrealloc' function. */
+#undef HAVE_HTREALLOC
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `m' library (-lm). */
+#undef HAVE_LIBM
+
+/* Define to 1 if you have the `pq' library (-lpq). */
+#undef HAVE_LIBPQ
+
+/* Define to 1 if you have the <libpq-fe.h> header file. */
+#undef HAVE_LIBPQ_FE_H
+
+/* Define to 1 if you have the `smmapdfw' library (-lsmmapdfw). */
+#undef HAVE_LIBSMMAPDFW
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <queue.h> header file. */
+#undef HAVE_QUEUE_H
+
+/* Define to 1 if you have the <smmapd.h> header file. */
+#undef HAVE_SMMAPD_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `syslog' function. */
+#undef HAVE_SYSLOG
+
+/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `vfork' function. */
+#undef HAVE_VFORK
+
+/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H
+
+/* Define to 1 if `fork' works. */
+#undef HAVE_WORKING_FORK
+
+/* Define to 1 if `vfork' works. */
+#undef HAVE_WORKING_VFORK
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to the type of arg 1 for `select'. */
+#undef SELECT_TYPE_ARG1
+
+/* Define to the type of args 2, 3 and 4 for `select'. */
+#undef SELECT_TYPE_ARG234
+
+/* Define to the type of arg 5 for `select'. */
+#undef SELECT_TYPE_ARG5
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define as `fork' if `vfork' does not work. */
+#undef vfork

pgworker/AUTHORS

@@ -0,0 +1 @@
+Wolfgang Hottgenroth <woho@hottis.de>

pgworker/COPYING

@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

pgworker/INSTALL

@@ -0,0 +1,182 @@
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.

pgworker/Makefile.am

@@ -0,0 +1,3 @@
+SUBDIRS = pgworker
+
+

pgworker/Makefile.in

@@ -0,0 +1,378 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+SUBDIRS = pgworker
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = 
+DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
+Makefile.am Makefile.in NEWS aclocal.m4 config.guess config.h.in \
+config.sub configure configure.ac install-sh ltmain.sh missing \
+mkinstalldirs
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.ac 
+	cd $(srcdir) && $(ACLOCAL)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+config.h: stamp-h
+	@if test ! -f $@; then \
+		rm -f stamp-h; \
+		$(MAKE) stamp-h; \
+	else :; fi
+stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
+	     $(SHELL) ./config.status
+	@echo timestamp > stamp-h 2> /dev/null
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
+	@if test ! -f $@; then \
+		rm -f $(srcdir)/stamp-h.in; \
+		$(MAKE) $(srcdir)/stamp-h.in; \
+	else :; fi
+$(srcdir)/stamp-h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
+
+mostlyclean-hdr:
+
+clean-hdr:
+
+distclean-hdr:
+	-rm -f config.h
+
+maintainer-clean-hdr:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive  \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+	  rev="$$subdir $$rev"; \
+	  test "$$subdir" != "." || dot_seen=yes; \
+	done; \
+	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+   if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+   fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@banner="$(distdir).tar.gz is ready for distribution"; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    chmod 777 $(distdir)/$$subdir; \
+	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+info-am:
+info: info-recursive
+dvi-am:
+dvi: dvi-recursive
+check-am: all-am
+check: check-recursive
+installcheck-am:
+installcheck: installcheck-recursive
+all-recursive-am: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+install-exec-am:
+install-exec: install-exec-recursive
+
+install-data-am:
+install-data: install-data-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-recursive
+uninstall-am:
+uninstall: uninstall-recursive
+all-am: Makefile config.h
+all-redirect: all-recursive-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs: installdirs-recursive
+installdirs-am:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-recursive
+
+clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
+
+clean: clean-recursive
+
+distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-recursive
+	-rm -f config.status
+
+maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f config.status
+
+.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
+install-data-recursive uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs-am \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

pgworker/README

@@ -0,0 +1,13 @@
+smmapd.ini snippet:
+
+[pgworker]
+obj = /home/who/Sources/sf/test/pgworker/lib/libpg_worker.so
+debug = 1
+sql_statement = SELECT a.mailuser, a.mailtarget, a.mailalias FROM mailaddress_t
+a, domain_t d WHERE a.address=$1 and d.name=$2 and a.domain = d.id
+input_delimiter = |
+output_format_string = <$1><$2><$3>
+dbhost = confdb.hottis.de
+dbname = config
+dbuser = lurker
+dbpass = lurker123

pgworker/autom4te.cache/requests

@@ -0,0 +1,224 @@
+# This file was generated by Autom4te Mon Sep 13 19:52:04 PDT 2004.
+# It contains the lists of macros which have been traced.
+# It can be safely removed.
+
+@request = (
+             bless( [
+                      '0',
+                      1,
+                      [
+                        '/usr/share/autoconf'
+                      ],
+                      [
+                        '/usr/share/autoconf/autoconf/autoconf.m4f',
+                        'configure.ac'
+                      ],
+                      {
+                        'm4_pattern_forbid' => 1,
+                        'AC_CONFIG_LIBOBJ_DIR' => 1,
+                        'AC_C_VOLATILE' => 1,
+                        'AC_TYPE_OFF_T' => 1,
+                        'AC_FUNC_CLOSEDIR_VOID' => 1,
+                        'AC_REPLACE_FNMATCH' => 1,
+                        'AC_PROG_LIBTOOL' => 1,
+                        'AC_FUNC_STAT' => 1,
+                        'AC_FUNC_WAIT3' => 1,
+                        'AC_HEADER_TIME' => 1,
+                        'AC_FUNC_LSTAT' => 1,
+                        'AC_STRUCT_TM' => 1,
+                        'AM_AUTOMAKE_VERSION' => 1,
+                        'AC_FUNC_GETMNTENT' => 1,
+                        'AC_TYPE_MODE_T' => 1,
+                        'AC_FUNC_STRTOD' => 1,
+                        'AC_CHECK_HEADERS' => 1,
+                        'AC_FUNC_STRNLEN' => 1,
+                        'm4_sinclude' => 1,
+                        'AC_PROG_CXX' => 1,
+                        'AC_PATH_X' => 1,
+                        'AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK' => 1,
+                        'AC_PROG_AWK' => 1,
+                        '_m4_warn' => 1,
+                        'AC_HEADER_STDC' => 1,
+                        'AC_HEADER_MAJOR' => 1,
+                        'AC_FUNC_ERROR_AT_LINE' => 1,
+                        'AC_PROG_GCC_TRADITIONAL' => 1,
+                        'AC_LIBSOURCE' => 1,
+                        'AC_FUNC_MBRTOWC' => 1,
+                        'AC_STRUCT_ST_BLOCKS' => 1,
+                        'AC_TYPE_SIGNAL' => 1,
+                        'AC_TYPE_UID_T' => 1,
+                        'AC_PROG_MAKE_SET' => 1,
+                        'AC_CONFIG_AUX_DIR' => 1,
+                        'm4_pattern_allow' => 1,
+                        'sinclude' => 1,
+                        'AC_DEFINE_TRACE_LITERAL' => 1,
+                        'AC_FUNC_STRERROR_R' => 1,
+                        'AC_PROG_CC' => 1,
+                        'AC_DECL_SYS_SIGLIST' => 1,
+                        'AC_FUNC_FORK' => 1,
+                        'AC_FUNC_STRCOLL' => 1,
+                        'AC_FUNC_VPRINTF' => 1,
+                        'AC_PROG_YACC' => 1,
+                        'AC_INIT' => 1,
+                        'AC_STRUCT_TIMEZONE' => 1,
+                        'AC_FUNC_CHOWN' => 1,
+                        'AC_SUBST' => 1,
+                        'AC_FUNC_ALLOCA' => 1,
+                        'AC_CANONICAL_HOST' => 1,
+                        'AC_FUNC_GETPGRP' => 1,
+                        'AC_PROG_RANLIB' => 1,
+                        'AM_INIT_AUTOMAKE' => 1,
+                        'AC_FUNC_SETPGRP' => 1,
+                        'AC_CONFIG_SUBDIRS' => 1,
+                        'AC_FUNC_MMAP' => 1,
+                        'AC_FUNC_REALLOC' => 1,
+                        'AC_TYPE_SIZE_T' => 1,
+                        'AC_CONFIG_LINKS' => 1,
+                        'AC_CHECK_TYPES' => 1,
+                        'AC_CHECK_MEMBERS' => 1,
+                        'AM_MAINTAINER_MODE' => 1,
+                        'AC_FUNC_UTIME_NULL' => 1,
+                        'AC_FUNC_SELECT_ARGTYPES' => 1,
+                        'AC_HEADER_STAT' => 1,
+                        'AC_FUNC_STRFTIME' => 1,
+                        'AC_PROG_CPP' => 1,
+                        'AC_C_INLINE' => 1,
+                        'AC_PROG_LEX' => 1,
+                        'AC_C_CONST' => 1,
+                        'AC_TYPE_PID_T' => 1,
+                        'AC_CONFIG_FILES' => 1,
+                        'include' => 1,
+                        'AC_FUNC_SETVBUF_REVERSED' => 1,
+                        'AC_PROG_INSTALL' => 1,
+                        'AM_GNU_GETTEXT' => 1,
+                        'AC_CHECK_LIB' => 1,
+                        'AC_FUNC_OBSTACK' => 1,
+                        'AC_FUNC_MALLOC' => 1,
+                        'AC_FUNC_GETGROUPS' => 1,
+                        'AC_FUNC_GETLOADAVG' => 1,
+                        'AH_OUTPUT' => 1,
+                        'AC_FUNC_FSEEKO' => 1,
+                        'AM_PROG_CC_C_O' => 1,
+                        'AC_FUNC_MKTIME' => 1,
+                        'AC_CANONICAL_SYSTEM' => 1,
+                        'AM_CONDITIONAL' => 1,
+                        'AC_CONFIG_HEADERS' => 1,
+                        'AC_HEADER_SYS_WAIT' => 1,
+                        'AC_PROG_LN_S' => 1,
+                        'AC_FUNC_MEMCMP' => 1,
+                        'm4_include' => 1,
+                        'AC_HEADER_DIRENT' => 1,
+                        'AC_CHECK_FUNCS' => 1
+                      }
+                    ], 'Autom4te::Request' ),
+             bless( [
+                      '1',
+                      1,
+                      [
+                        '/usr/share/autoconf'
+                      ],
+                      [
+                        '/usr/share/autoconf/autoconf/autoconf.m4f',
+                        'aclocal.m4',
+                        'configure.ac'
+                      ],
+                      {
+                        'm4_pattern_forbid' => 1,
+                        'AC_CONFIG_LIBOBJ_DIR' => 1,
+                        'AC_C_VOLATILE' => 1,
+                        'AC_TYPE_OFF_T' => 1,
+                        'AC_FUNC_CLOSEDIR_VOID' => 1,
+                        'AC_REPLACE_FNMATCH' => 1,
+                        'AC_PROG_LIBTOOL' => 1,
+                        'AC_FUNC_STAT' => 1,
+                        'AC_FUNC_WAIT3' => 1,
+                        'AC_HEADER_TIME' => 1,
+                        'AC_FUNC_LSTAT' => 1,
+                        'AC_STRUCT_TM' => 1,
+                        'AM_AUTOMAKE_VERSION' => 1,
+                        'AC_FUNC_GETMNTENT' => 1,
+                        'AC_TYPE_MODE_T' => 1,
+                        'AC_FUNC_STRTOD' => 1,
+                        'AC_CHECK_HEADERS' => 1,
+                        'AC_FUNC_STRNLEN' => 1,
+                        'm4_sinclude' => 1,
+                        'AC_PROG_CXX' => 1,
+                        'AC_PATH_X' => 1,
+                        'AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK' => 1,
+                        'AC_PROG_AWK' => 1,
+                        '_m4_warn' => 1,
+                        'AC_HEADER_STDC' => 1,
+                        'AC_HEADER_MAJOR' => 1,
+                        'AC_FUNC_ERROR_AT_LINE' => 1,
+                        'AC_PROG_GCC_TRADITIONAL' => 1,
+                        'AC_LIBSOURCE' => 1,
+                        'AC_FUNC_MBRTOWC' => 1,
+                        'AC_STRUCT_ST_BLOCKS' => 1,
+                        'AC_TYPE_SIGNAL' => 1,
+                        'AC_TYPE_UID_T' => 1,
+                        'AC_PROG_MAKE_SET' => 1,
+                        'AC_CONFIG_AUX_DIR' => 1,
+                        'm4_pattern_allow' => 1,
+                        'sinclude' => 1,
+                        'AC_DEFINE_TRACE_LITERAL' => 1,
+                        'AC_FUNC_STRERROR_R' => 1,
+                        'AC_PROG_CC' => 1,
+                        'AC_FUNC_FORK' => 1,
+                        'AC_DECL_SYS_SIGLIST' => 1,
+                        'AC_FUNC_STRCOLL' => 1,
+                        'AC_FUNC_VPRINTF' => 1,
+                        'AC_PROG_YACC' => 1,
+                        'AC_INIT' => 1,
+                        'AC_STRUCT_TIMEZONE' => 1,
+                        'AC_FUNC_CHOWN' => 1,
+                        'AC_SUBST' => 1,
+                        'AC_FUNC_ALLOCA' => 1,
+                        'AC_CANONICAL_HOST' => 1,
+                        'AC_FUNC_GETPGRP' => 1,
+                        'AC_PROG_RANLIB' => 1,
+                        'AM_INIT_AUTOMAKE' => 1,
+                        'AC_FUNC_SETPGRP' => 1,
+                        'AC_CONFIG_SUBDIRS' => 1,
+                        'AC_FUNC_MMAP' => 1,
+                        'AC_FUNC_REALLOC' => 1,
+                        'AC_TYPE_SIZE_T' => 1,
+                        'AC_CONFIG_LINKS' => 1,
+                        'AC_CHECK_TYPES' => 1,
+                        'AC_CHECK_MEMBERS' => 1,
+                        'AM_MAINTAINER_MODE' => 1,
+                        'AC_FUNC_UTIME_NULL' => 1,
+                        'AC_FUNC_SELECT_ARGTYPES' => 1,
+                        'AC_HEADER_STAT' => 1,
+                        'AC_FUNC_STRFTIME' => 1,
+                        'AC_PROG_CPP' => 1,
+                        'AC_C_INLINE' => 1,
+                        'AC_PROG_LEX' => 1,
+                        'AC_C_CONST' => 1,
+                        'AC_TYPE_PID_T' => 1,
+                        'AC_CONFIG_FILES' => 1,
+                        'include' => 1,
+                        'AC_FUNC_SETVBUF_REVERSED' => 1,
+                        'AC_PROG_INSTALL' => 1,
+                        'AM_GNU_GETTEXT' => 1,
+                        'AC_FUNC_OBSTACK' => 1,
+                        'AC_CHECK_LIB' => 1,
+                        'AC_FUNC_MALLOC' => 1,
+                        'AC_FUNC_GETGROUPS' => 1,
+                        'AC_FUNC_GETLOADAVG' => 1,
+                        'AH_OUTPUT' => 1,
+                        'AC_FUNC_FSEEKO' => 1,
+                        'AM_PROG_CC_C_O' => 1,
+                        'AC_FUNC_MKTIME' => 1,
+                        'AC_CANONICAL_SYSTEM' => 1,
+                        'AM_CONDITIONAL' => 1,
+                        'AC_CONFIG_HEADERS' => 1,
+                        'AC_HEADER_SYS_WAIT' => 1,
+                        'AC_PROG_LN_S' => 1,
+                        'AC_FUNC_MEMCMP' => 1,
+                        'm4_include' => 1,
+                        'AC_HEADER_DIRENT' => 1,
+                        'AC_CHECK_FUNCS' => 1
+                      }
+                    ], 'Autom4te::Request' )
+           );
+

pgworker/autom4te.cache/traces.0

@@ -0,0 +1,220 @@
+m4trace:configure.ac:5: -1- AC_INIT([pgworker], [0.1], [woho@hottis.de])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?A[CHUM]_])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([_AC_])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'])
+m4trace:configure.ac:5: -1- m4_pattern_allow([^AS_FLAGS$])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?m4_])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^dnl$])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?AS_])
+m4trace:configure.ac:5: -1- AC_SUBST([SHELL], [${CONFIG_SHELL-/bin/sh}])
+m4trace:configure.ac:5: -1- AC_SUBST([PATH_SEPARATOR])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME],      ['AC_PACKAGE_NAME'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME],   ['AC_PACKAGE_TARNAME'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION],   ['AC_PACKAGE_VERSION'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING],    ['AC_PACKAGE_STRING'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
+m4trace:configure.ac:5: -1- AC_SUBST([exec_prefix], [NONE])
+m4trace:configure.ac:5: -1- AC_SUBST([prefix], [NONE])
+m4trace:configure.ac:5: -1- AC_SUBST([program_transform_name], [s,x,x,])
+m4trace:configure.ac:5: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
+m4trace:configure.ac:5: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
+m4trace:configure.ac:5: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
+m4trace:configure.ac:5: -1- AC_SUBST([datadir], ['${prefix}/share'])
+m4trace:configure.ac:5: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
+m4trace:configure.ac:5: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
+m4trace:configure.ac:5: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
+m4trace:configure.ac:5: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
+m4trace:configure.ac:5: -1- AC_SUBST([includedir], ['${prefix}/include'])
+m4trace:configure.ac:5: -1- AC_SUBST([oldincludedir], ['/usr/include'])
+m4trace:configure.ac:5: -1- AC_SUBST([infodir], ['${prefix}/info'])
+m4trace:configure.ac:5: -1- AC_SUBST([mandir], ['${prefix}/man'])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
+#undef PACKAGE_NAME])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
+#undef PACKAGE_VERSION])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT])
+m4trace:configure.ac:5: -1- AC_SUBST([build_alias])
+m4trace:configure.ac:5: -1- AC_SUBST([host_alias])
+m4trace:configure.ac:5: -1- AC_SUBST([target_alias])
+m4trace:configure.ac:5: -1- AC_SUBST([DEFS])
+m4trace:configure.ac:5: -1- AC_SUBST([ECHO_C])
+m4trace:configure.ac:5: -1- AC_SUBST([ECHO_N])
+m4trace:configure.ac:5: -1- AC_SUBST([ECHO_T])
+m4trace:configure.ac:5: -1- AC_SUBST([LIBS])
+m4trace:configure.ac:9: -1- AC_CONFIG_HEADERS([config.h])
+m4trace:configure.ac:11: -1- _m4_warn([obsolete], [The macro `AC_LANG_C' is obsolete.
+You should run autoupdate.], [autoconf/c.m4:71: AC_LANG_C is expanded from...
+configure.ac:11: the top level])
+m4trace:configure.ac:26: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:26: the top level])
+m4trace:configure.ac:41: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:41: the top level])
+m4trace:configure.ac:56: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:56: the top level])
+m4trace:configure.ac:71: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:71: the top level])
+m4trace:configure.ac:77: -1- AC_PROG_CC
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CFLAGS])
+m4trace:configure.ac:77: -1- AC_SUBST([LDFLAGS])
+m4trace:configure.ac:77: -1- AC_SUBST([CPPFLAGS])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([ac_ct_CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([ac_ct_CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([ac_ct_CC])
+m4trace:configure.ac:77: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
+m4trace:configure.ac:77: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
+m4trace:configure.ac:79: -1- AC_PROG_MAKE_SET
+m4trace:configure.ac:79: -1- AC_SUBST([SET_MAKE])
+m4trace:configure.ac:82: -1- AC_CHECK_LIB([m], [sin])
+m4trace:configure.ac:82: -1- AH_OUTPUT([HAVE_LIBM], [/* Define to 1 if you have the `m\' library (-lm). */
+#undef HAVE_LIBM])
+m4trace:configure.ac:82: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBM])
+m4trace:configure.ac:83: -1- AC_CHECK_LIB([pq], [PQstatus])
+m4trace:configure.ac:83: -1- AH_OUTPUT([HAVE_LIBPQ], [/* Define to 1 if you have the `pq\' library (-lpq). */
+#undef HAVE_LIBPQ])
+m4trace:configure.ac:83: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBPQ])
+m4trace:configure.ac:84: -1- AC_CHECK_LIB([smmapdfw], [findcfgl])
+m4trace:configure.ac:84: -1- AH_OUTPUT([HAVE_LIBSMMAPDFW], [/* Define to 1 if you have the `smmapdfw\' library (-lsmmapdfw). */
+#undef HAVE_LIBSMMAPDFW])
+m4trace:configure.ac:84: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBSMMAPDFW])
+m4trace:configure.ac:90: -1- AC_HEADER_STDC
+m4trace:configure.ac:90: -1- AC_PROG_CPP
+m4trace:configure.ac:90: -1- AC_SUBST([CPP])
+m4trace:configure.ac:90: -1- AC_SUBST([CPPFLAGS])
+m4trace:configure.ac:90: -1- AC_SUBST([CPP])
+m4trace:configure.ac:90: -1- AC_SUBST([EGREP])
+m4trace:configure.ac:90: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
+m4trace:configure.ac:90: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS])
+m4trace:configure.ac:91: -1- AC_CHECK_HEADERS([stdlib.h string.h strings.h syslog.h unistd.h libpq-fe.h cfg.h containers_public.h smmapd.h htmalloc.h queue.h count.h])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_SYSLOG_H], [/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_LIBPQ_FE_H], [/* Define to 1 if you have the <libpq-fe.h> header file. */
+#undef HAVE_LIBPQ_FE_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_CFG_H], [/* Define to 1 if you have the <cfg.h> header file. */
+#undef HAVE_CFG_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_CONTAINERS_PUBLIC_H], [/* Define to 1 if you have the <containers_public.h> header file. */
+#undef HAVE_CONTAINERS_PUBLIC_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_SMMAPD_H], [/* Define to 1 if you have the <smmapd.h> header file. */
+#undef HAVE_SMMAPD_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_HTMALLOC_H], [/* Define to 1 if you have the <htmalloc.h> header file. */
+#undef HAVE_HTMALLOC_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_QUEUE_H], [/* Define to 1 if you have the <queue.h> header file. */
+#undef HAVE_QUEUE_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_COUNT_H], [/* Define to 1 if you have the <count.h> header file. */
+#undef HAVE_COUNT_H])
+m4trace:configure.ac:91: -1- AC_CHECK_HEADERS([sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h], [], [], [$ac_includes_default])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H])
+m4trace:configure.ac:95: -1- AC_C_CONST
+m4trace:configure.ac:95: -1- AC_DEFINE_TRACE_LITERAL([const])
+m4trace:configure.ac:95: -1- AH_OUTPUT([const], [/* Define to empty if `const\' does not conform to ANSI C. */
+#undef const])
+m4trace:configure.ac:96: -1- AC_TYPE_SIZE_T
+m4trace:configure.ac:96: -1- AC_DEFINE_TRACE_LITERAL([size_t])
+m4trace:configure.ac:96: -1- AH_OUTPUT([size_t], [/* Define to `unsigned\' if <sys/types.h> does not define. */
+#undef size_t])
+m4trace:configure.ac:97: -1- AC_HEADER_TIME
+m4trace:configure.ac:97: -1- AC_DEFINE_TRACE_LITERAL([TIME_WITH_SYS_TIME])
+m4trace:configure.ac:97: -1- AH_OUTPUT([TIME_WITH_SYS_TIME], [/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME])
+m4trace:configure.ac:100: -1- AC_FUNC_FORK
+m4trace:configure.ac:100: -1- AC_TYPE_PID_T
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([pid_t])
+m4trace:configure.ac:100: -1- AH_OUTPUT([pid_t], [/* Define to `int\' if <sys/types.h> does not define. */
+#undef pid_t])
+m4trace:configure.ac:100: -1- AC_CHECK_HEADERS([unistd.h vfork.h])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_VFORK_H], [/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H])
+m4trace:configure.ac:100: -1- AC_CHECK_FUNCS([fork vfork])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_FORK], [/* Define to 1 if you have the `fork\' function. */
+#undef HAVE_FORK])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_VFORK], [/* Define to 1 if you have the `vfork\' function. */
+#undef HAVE_VFORK])
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([HAVE_WORKING_VFORK])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_WORKING_VFORK], [/* Define to 1 if `vfork\' works. */
+#undef HAVE_WORKING_VFORK])
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([vfork])
+m4trace:configure.ac:100: -1- AH_OUTPUT([vfork], [/* Define as `fork\' if `vfork\' does not work. */
+#undef vfork])
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([HAVE_WORKING_FORK])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_WORKING_FORK], [/* Define to 1 if `fork\' works. */
+#undef HAVE_WORKING_FORK])
+m4trace:configure.ac:103: -1- AC_FUNC_SELECT_ARGTYPES
+m4trace:configure.ac:103: -1- AC_CHECK_HEADERS([sys/select.h sys/socket.h])
+m4trace:configure.ac:103: -1- AH_OUTPUT([HAVE_SYS_SELECT_H], [/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H])
+m4trace:configure.ac:103: -1- AH_OUTPUT([HAVE_SYS_SOCKET_H], [/* Define to 1 if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H])
+m4trace:configure.ac:103: -1- AC_DEFINE_TRACE_LITERAL([SELECT_TYPE_ARG1])
+m4trace:configure.ac:103: -1- AH_OUTPUT([SELECT_TYPE_ARG1], [/* Define to the type of arg 1 for `select\'. */
+#undef SELECT_TYPE_ARG1])
+m4trace:configure.ac:103: -1- AC_DEFINE_TRACE_LITERAL([SELECT_TYPE_ARG234])
+m4trace:configure.ac:103: -1- AH_OUTPUT([SELECT_TYPE_ARG234], [/* Define to the type of args 2, 3 and 4 for `select\'. */
+#undef SELECT_TYPE_ARG234])
+m4trace:configure.ac:103: -1- AC_DEFINE_TRACE_LITERAL([SELECT_TYPE_ARG5])
+m4trace:configure.ac:103: -1- AH_OUTPUT([SELECT_TYPE_ARG5], [/* Define to the type of arg 5 for `select\'. */
+#undef SELECT_TYPE_ARG5])
+m4trace:configure.ac:105: -1- AC_CHECK_FUNCS([syslog findcfgl findcfglx htmalloc htrealloc], [], [AC_MSG_ERROR([*** missing function, we can't go without it])])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_SYSLOG], [/* Define to 1 if you have the `syslog\' function. */
+#undef HAVE_SYSLOG])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_FINDCFGL], [/* Define to 1 if you have the `findcfgl\' function. */
+#undef HAVE_FINDCFGL])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_FINDCFGLX], [/* Define to 1 if you have the `findcfglx\' function. */
+#undef HAVE_FINDCFGLX])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_HTMALLOC], [/* Define to 1 if you have the `htmalloc\' function. */
+#undef HAVE_HTMALLOC])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_HTREALLOC], [/* Define to 1 if you have the `htrealloc\' function. */
+#undef HAVE_HTREALLOC])
+m4trace:configure.ac:111: -1- AC_CONFIG_FILES([Makefile pgworker/Makefile])
+m4trace:configure.ac:113: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs])
+m4trace:configure.ac:113: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])

pgworker/autom4te.cache/traces.1

@@ -0,0 +1,545 @@
+m4trace:configure.ac:5: -1- AC_INIT([pgworker], [0.1], [woho@hottis.de])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?A[CHUM]_])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([_AC_])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS'])
+m4trace:configure.ac:5: -1- m4_pattern_allow([^AS_FLAGS$])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?m4_])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^dnl$])
+m4trace:configure.ac:5: -1- m4_pattern_forbid([^_?AS_])
+m4trace:configure.ac:5: -1- AC_SUBST([SHELL], [${CONFIG_SHELL-/bin/sh}])
+m4trace:configure.ac:5: -1- AC_SUBST([PATH_SEPARATOR])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME],      ['AC_PACKAGE_NAME'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME],   ['AC_PACKAGE_TARNAME'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION],   ['AC_PACKAGE_VERSION'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING],    ['AC_PACKAGE_STRING'])])
+m4trace:configure.ac:5: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])])
+m4trace:configure.ac:5: -1- AC_SUBST([exec_prefix], [NONE])
+m4trace:configure.ac:5: -1- AC_SUBST([prefix], [NONE])
+m4trace:configure.ac:5: -1- AC_SUBST([program_transform_name], [s,x,x,])
+m4trace:configure.ac:5: -1- AC_SUBST([bindir], ['${exec_prefix}/bin'])
+m4trace:configure.ac:5: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin'])
+m4trace:configure.ac:5: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec'])
+m4trace:configure.ac:5: -1- AC_SUBST([datadir], ['${prefix}/share'])
+m4trace:configure.ac:5: -1- AC_SUBST([sysconfdir], ['${prefix}/etc'])
+m4trace:configure.ac:5: -1- AC_SUBST([sharedstatedir], ['${prefix}/com'])
+m4trace:configure.ac:5: -1- AC_SUBST([localstatedir], ['${prefix}/var'])
+m4trace:configure.ac:5: -1- AC_SUBST([libdir], ['${exec_prefix}/lib'])
+m4trace:configure.ac:5: -1- AC_SUBST([includedir], ['${prefix}/include'])
+m4trace:configure.ac:5: -1- AC_SUBST([oldincludedir], ['/usr/include'])
+m4trace:configure.ac:5: -1- AC_SUBST([infodir], ['${prefix}/info'])
+m4trace:configure.ac:5: -1- AC_SUBST([mandir], ['${prefix}/man'])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
+#undef PACKAGE_NAME])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
+#undef PACKAGE_VERSION])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING])
+m4trace:configure.ac:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
+m4trace:configure.ac:5: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT])
+m4trace:configure.ac:5: -1- AC_SUBST([build_alias])
+m4trace:configure.ac:5: -1- AC_SUBST([host_alias])
+m4trace:configure.ac:5: -1- AC_SUBST([target_alias])
+m4trace:configure.ac:5: -1- AC_SUBST([DEFS])
+m4trace:configure.ac:5: -1- AC_SUBST([ECHO_C])
+m4trace:configure.ac:5: -1- AC_SUBST([ECHO_N])
+m4trace:configure.ac:5: -1- AC_SUBST([ECHO_T])
+m4trace:configure.ac:5: -1- AC_SUBST([LIBS])
+m4trace:configure.ac:6: -1- AM_INIT_AUTOMAKE([pgworker], [0.1])
+m4trace:configure.ac:6: -1- AM_AUTOMAKE_VERSION([1.4-p6])
+m4trace:configure.ac:6: -1- AC_PROG_INSTALL
+m4trace:configure.ac:6: -1- AC_SUBST([INSTALL_PROGRAM])
+m4trace:configure.ac:6: -1- AC_SUBST([INSTALL_SCRIPT])
+m4trace:configure.ac:6: -1- AC_SUBST([INSTALL_DATA])
+m4trace:configure.ac:6: -1- AC_SUBST([PACKAGE])
+m4trace:configure.ac:6: -1- AC_SUBST([VERSION])
+m4trace:configure.ac:6: -2- AC_DEFINE_TRACE_LITERAL([PACKAGE])
+m4trace:configure.ac:6: -2- AH_OUTPUT([PACKAGE], [/* Name of package */
+#undef PACKAGE])
+m4trace:configure.ac:6: -2- AC_DEFINE_TRACE_LITERAL([VERSION])
+m4trace:configure.ac:6: -2- AH_OUTPUT([VERSION], [/* Version number of package */
+#undef VERSION])
+m4trace:configure.ac:6: -1- AC_SUBST([ACLOCAL])
+m4trace:configure.ac:6: -1- AC_SUBST([AUTOCONF])
+m4trace:configure.ac:6: -1- AC_SUBST([AUTOMAKE])
+m4trace:configure.ac:6: -1- AC_SUBST([AUTOHEADER])
+m4trace:configure.ac:6: -1- AC_SUBST([MAKEINFO])
+m4trace:configure.ac:6: -1- AC_PROG_MAKE_SET
+m4trace:configure.ac:6: -1- AC_SUBST([SET_MAKE])
+m4trace:configure.ac:7: -1- AM_MAINTAINER_MODE
+m4trace:configure.ac:7: -1- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+m4trace:configure.ac:7: -1- AC_SUBST([MAINTAINER_MODE_TRUE])
+m4trace:configure.ac:7: -1- AC_SUBST([MAINTAINER_MODE_FALSE])
+m4trace:configure.ac:7: -1- AC_SUBST([MAINT])
+m4trace:configure.ac:9: -1- AC_CONFIG_HEADERS([config.h])
+m4trace:configure.ac:9: -1- _m4_warn([obsolete], [The macro `AC_OUTPUT_COMMANDS' is obsolete.
+You should run autoupdate.], [autoconf/status.m4:318: AC_OUTPUT_COMMANDS is expanded from...
+aclocal.m4:1010: AM_CONFIG_HEADER is expanded from...
+configure.ac:9: the top level])
+m4trace:configure.ac:9: -3- _m4_warn([obsolete], [The macro `_AC_OUTPUT_COMMANDS_CNT' is obsolete.
+You should run autoupdate.], [autoconf/status.m4:321: _AC_OUTPUT_COMMANDS_CNT is expanded from...
+autoconf/status.m4:318: AC_OUTPUT_COMMANDS is expanded from...
+aclocal.m4:1010: AM_CONFIG_HEADER is expanded from...
+configure.ac:9: the top level])
+m4trace:configure.ac:11: -1- _m4_warn([obsolete], [The macro `AC_LANG_C' is obsolete.
+You should run autoupdate.], [autoconf/c.m4:71: AC_LANG_C is expanded from...
+configure.ac:11: the top level])
+m4trace:configure.ac:26: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:26: the top level])
+m4trace:configure.ac:41: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:41: the top level])
+m4trace:configure.ac:56: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:56: the top level])
+m4trace:configure.ac:71: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+configure.ac:71: the top level])
+m4trace:configure.ac:77: -1- AC_PROG_CC
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CFLAGS])
+m4trace:configure.ac:77: -1- AC_SUBST([LDFLAGS])
+m4trace:configure.ac:77: -1- AC_SUBST([CPPFLAGS])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([ac_ct_CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([ac_ct_CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([CC])
+m4trace:configure.ac:77: -1- AC_SUBST([ac_ct_CC])
+m4trace:configure.ac:77: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
+m4trace:configure.ac:77: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
+m4trace:configure.ac:78: -1- AC_PROG_LIBTOOL
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
+aclocal.m4:2772: AC_ENABLE_SHARED is expanded from...
+configure.ac:78: AC_ENABLE_SHARED is required by...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
+aclocal.m4:2811: AC_ENABLE_STATIC is expanded from...
+configure.ac:78: AC_ENABLE_STATIC is required by...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
+aclocal.m4:2850: AC_ENABLE_FAST_INSTALL is expanded from...
+configure.ac:78: AC_ENABLE_FAST_INSTALL is required by...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- AC_CANONICAL_HOST
+m4trace:configure.ac:78: -1- AC_SUBST([build], [$ac_cv_build])
+m4trace:configure.ac:78: -1- AC_SUBST([build_cpu], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\1/'`])
+m4trace:configure.ac:78: -1- AC_SUBST([build_vendor], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\2/'`])
+m4trace:configure.ac:78: -1- AC_SUBST([build_os], [`echo $ac_cv_build | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\3/'`])
+m4trace:configure.ac:78: -1- AC_SUBST([host], [$ac_cv_host])
+m4trace:configure.ac:78: -1- AC_SUBST([host_cpu], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\1/'`])
+m4trace:configure.ac:78: -1- AC_SUBST([host_vendor], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\2/'`])
+m4trace:configure.ac:78: -1- AC_SUBST([host_os], [`echo $ac_cv_host | sed 's/^\([[^-]]*\)-\([[^-]]*\)-\(.*\)$/\3/'`])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+aclocal.m4:3047: AC_PROG_LD is expanded from...
+configure.ac:78: AC_PROG_LD is required by...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- AC_SUBST([EGREP])
+m4trace:configure.ac:78: -1- AC_PROG_LN_S
+m4trace:configure.ac:78: -1- AC_SUBST([LN_S], [$as_ln_s])
+m4trace:configure.ac:78: -1- AC_SUBST([ECHO])
+m4trace:configure.ac:78: -1- AC_SUBST([AR])
+m4trace:configure.ac:78: -1- AC_SUBST([ac_ct_AR])
+m4trace:configure.ac:78: -1- AC_SUBST([RANLIB])
+m4trace:configure.ac:78: -1- AC_SUBST([ac_ct_RANLIB])
+m4trace:configure.ac:78: -1- AC_SUBST([STRIP])
+m4trace:configure.ac:78: -1- AC_SUBST([ac_ct_STRIP])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:2223: AC_TRY_LINK is expanded from...
+autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
+autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
+aclocal.m4:1549: _LT_AC_LOCK is expanded from...
+configure.ac:78: _LT_AC_LOCK is required by...
+aclocal.m4:1980: AC_LIBTOOL_SYS_HARD_LINK_LOCKS is expanded from...
+aclocal.m4:3594: _LT_AC_LANG_C_CONFIG is expanded from...
+aclocal.m4:3461: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- AC_CHECK_HEADERS([dlfcn.h])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_DLFCN_H], [/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H])
+m4trace:configure.ac:78: -1- AC_HEADER_STDC
+m4trace:configure.ac:78: -1- AC_PROG_CPP
+m4trace:configure.ac:78: -1- AC_SUBST([CPP])
+m4trace:configure.ac:78: -1- AC_SUBST([CPPFLAGS])
+m4trace:configure.ac:78: -1- AC_SUBST([CPP])
+m4trace:configure.ac:78: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
+m4trace:configure.ac:78: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS])
+m4trace:configure.ac:78: -1- AC_CHECK_HEADERS([sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h], [], [], [$ac_includes_default])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H])
+m4trace:configure.ac:78: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], [AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
+You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
+autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
+aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me:$LINENO: error: tag name \"$tagname\" already exists], [aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me: error: tag name \"$tagname\" already exists], [aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- AC_PROG_CXX
+m4trace:configure.ac:78: -1- AC_SUBST([CXX])
+m4trace:configure.ac:78: -1- AC_SUBST([CXXFLAGS])
+m4trace:configure.ac:78: -1- AC_SUBST([LDFLAGS])
+m4trace:configure.ac:78: -1- AC_SUBST([CPPFLAGS])
+m4trace:configure.ac:78: -1- AC_SUBST([CXX])
+m4trace:configure.ac:78: -1- AC_SUBST([ac_ct_CXX])
+m4trace:configure.ac:78: -1- AC_SUBST([CXXCPP])
+m4trace:configure.ac:78: -1- AC_SUBST([CPPFLAGS])
+m4trace:configure.ac:78: -1- AC_SUBST([CXXCPP])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], [AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+m4trace:configure.ac:78: -1- AC_SUBST([F77])
+m4trace:configure.ac:78: -1- AC_SUBST([FFLAGS])
+m4trace:configure.ac:78: -1- AC_SUBST([LDFLAGS])
+m4trace:configure.ac:78: -1- AC_SUBST([F77])
+m4trace:configure.ac:78: -1- AC_SUBST([ac_ct_F77])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
+You should run autoupdate.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
+aclocal.m4:4771: _LT_AC_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:4728: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [instead of using `AC_LANG', `AC_LANG_SAVE',
+and `AC_LANG_RESTORE', you should use `AC_LANG_PUSH' and `AC_LANG_POP'.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
+aclocal.m4:4771: _LT_AC_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:4728: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], [AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+m4trace:configure.ac:78: -1- AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
+You should run autoupdate.], [autoconf/lang.m4:172: AC_LANG_RESTORE is expanded from...
+aclocal.m4:4771: _LT_AC_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:4728: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
+You should run autoupdate.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
+aclocal.m4:4810: _LT_AC_LANG_RC_CONFIG is expanded from...
+aclocal.m4:4779: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
+aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [instead of using `AC_LANG', `AC_LANG_SAVE',
+and `AC_LANG_RESTORE', you should use `AC_LANG_PUSH' and `AC_LANG_POP'.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
+aclocal.m4:4810: _LT_AC_LANG_RC_CONFIG is expanded from...
+aclocal.m4:4779: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
+aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
+You should run autoupdate.], [autoconf/lang.m4:172: AC_LANG_RESTORE is expanded from...
+aclocal.m4:4810: _LT_AC_LANG_RC_CONFIG is expanded from...
+aclocal.m4:4779: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
+aclocal.m4:2726: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1222: AC_LIBTOOL_SETUP is expanded from...
+configure.ac:78: AC_LIBTOOL_SETUP is required by...
+aclocal.m4:1080: _AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: _AC_PROG_LIBTOOL is required by...
+aclocal.m4:1060: AC_PROG_LIBTOOL is expanded from...
+configure.ac:78: the top level])
+m4trace:configure.ac:78: -1- AC_SUBST([LIBTOOL])
+m4trace:configure.ac:79: -1- AC_PROG_MAKE_SET
+m4trace:configure.ac:79: -1- AC_SUBST([SET_MAKE])
+m4trace:configure.ac:82: -1- AC_CHECK_LIB([m], [sin])
+m4trace:configure.ac:82: -1- AH_OUTPUT([HAVE_LIBM], [/* Define to 1 if you have the `m\' library (-lm). */
+#undef HAVE_LIBM])
+m4trace:configure.ac:82: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBM])
+m4trace:configure.ac:83: -1- AC_CHECK_LIB([pq], [PQstatus])
+m4trace:configure.ac:83: -1- AH_OUTPUT([HAVE_LIBPQ], [/* Define to 1 if you have the `pq\' library (-lpq). */
+#undef HAVE_LIBPQ])
+m4trace:configure.ac:83: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBPQ])
+m4trace:configure.ac:84: -1- AC_CHECK_LIB([smmapdfw], [findcfgl])
+m4trace:configure.ac:84: -1- AH_OUTPUT([HAVE_LIBSMMAPDFW], [/* Define to 1 if you have the `smmapdfw\' library (-lsmmapdfw). */
+#undef HAVE_LIBSMMAPDFW])
+m4trace:configure.ac:84: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBSMMAPDFW])
+m4trace:configure.ac:90: -1- AC_HEADER_STDC
+m4trace:configure.ac:90: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
+m4trace:configure.ac:90: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS])
+m4trace:configure.ac:91: -1- AC_CHECK_HEADERS([stdlib.h string.h strings.h syslog.h unistd.h libpq-fe.h cfg.h containers_public.h smmapd.h htmalloc.h queue.h count.h])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_SYSLOG_H], [/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_LIBPQ_FE_H], [/* Define to 1 if you have the <libpq-fe.h> header file. */
+#undef HAVE_LIBPQ_FE_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_CFG_H], [/* Define to 1 if you have the <cfg.h> header file. */
+#undef HAVE_CFG_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_CONTAINERS_PUBLIC_H], [/* Define to 1 if you have the <containers_public.h> header file. */
+#undef HAVE_CONTAINERS_PUBLIC_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_SMMAPD_H], [/* Define to 1 if you have the <smmapd.h> header file. */
+#undef HAVE_SMMAPD_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_HTMALLOC_H], [/* Define to 1 if you have the <htmalloc.h> header file. */
+#undef HAVE_HTMALLOC_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_QUEUE_H], [/* Define to 1 if you have the <queue.h> header file. */
+#undef HAVE_QUEUE_H])
+m4trace:configure.ac:91: -1- AH_OUTPUT([HAVE_COUNT_H], [/* Define to 1 if you have the <count.h> header file. */
+#undef HAVE_COUNT_H])
+m4trace:configure.ac:95: -1- AC_C_CONST
+m4trace:configure.ac:95: -1- AC_DEFINE_TRACE_LITERAL([const])
+m4trace:configure.ac:95: -1- AH_OUTPUT([const], [/* Define to empty if `const\' does not conform to ANSI C. */
+#undef const])
+m4trace:configure.ac:96: -1- AC_TYPE_SIZE_T
+m4trace:configure.ac:96: -1- AC_DEFINE_TRACE_LITERAL([size_t])
+m4trace:configure.ac:96: -1- AH_OUTPUT([size_t], [/* Define to `unsigned\' if <sys/types.h> does not define. */
+#undef size_t])
+m4trace:configure.ac:97: -1- AC_HEADER_TIME
+m4trace:configure.ac:97: -1- AC_DEFINE_TRACE_LITERAL([TIME_WITH_SYS_TIME])
+m4trace:configure.ac:97: -1- AH_OUTPUT([TIME_WITH_SYS_TIME], [/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME])
+m4trace:configure.ac:100: -1- AC_FUNC_FORK
+m4trace:configure.ac:100: -1- AC_TYPE_PID_T
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([pid_t])
+m4trace:configure.ac:100: -1- AH_OUTPUT([pid_t], [/* Define to `int\' if <sys/types.h> does not define. */
+#undef pid_t])
+m4trace:configure.ac:100: -1- AC_CHECK_HEADERS([unistd.h vfork.h])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_VFORK_H], [/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H])
+m4trace:configure.ac:100: -1- AC_CHECK_FUNCS([fork vfork])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_FORK], [/* Define to 1 if you have the `fork\' function. */
+#undef HAVE_FORK])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_VFORK], [/* Define to 1 if you have the `vfork\' function. */
+#undef HAVE_VFORK])
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([HAVE_WORKING_VFORK])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_WORKING_VFORK], [/* Define to 1 if `vfork\' works. */
+#undef HAVE_WORKING_VFORK])
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([vfork])
+m4trace:configure.ac:100: -1- AH_OUTPUT([vfork], [/* Define as `fork\' if `vfork\' does not work. */
+#undef vfork])
+m4trace:configure.ac:100: -1- AC_DEFINE_TRACE_LITERAL([HAVE_WORKING_FORK])
+m4trace:configure.ac:100: -1- AH_OUTPUT([HAVE_WORKING_FORK], [/* Define to 1 if `fork\' works. */
+#undef HAVE_WORKING_FORK])
+m4trace:configure.ac:103: -1- AC_FUNC_SELECT_ARGTYPES
+m4trace:configure.ac:103: -1- AC_CHECK_HEADERS([sys/select.h sys/socket.h])
+m4trace:configure.ac:103: -1- AH_OUTPUT([HAVE_SYS_SELECT_H], [/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H])
+m4trace:configure.ac:103: -1- AH_OUTPUT([HAVE_SYS_SOCKET_H], [/* Define to 1 if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H])
+m4trace:configure.ac:103: -1- AC_DEFINE_TRACE_LITERAL([SELECT_TYPE_ARG1])
+m4trace:configure.ac:103: -1- AH_OUTPUT([SELECT_TYPE_ARG1], [/* Define to the type of arg 1 for `select\'. */
+#undef SELECT_TYPE_ARG1])
+m4trace:configure.ac:103: -1- AC_DEFINE_TRACE_LITERAL([SELECT_TYPE_ARG234])
+m4trace:configure.ac:103: -1- AH_OUTPUT([SELECT_TYPE_ARG234], [/* Define to the type of args 2, 3 and 4 for `select\'. */
+#undef SELECT_TYPE_ARG234])
+m4trace:configure.ac:103: -1- AC_DEFINE_TRACE_LITERAL([SELECT_TYPE_ARG5])
+m4trace:configure.ac:103: -1- AH_OUTPUT([SELECT_TYPE_ARG5], [/* Define to the type of arg 5 for `select\'. */
+#undef SELECT_TYPE_ARG5])
+m4trace:configure.ac:105: -1- AC_CHECK_FUNCS([syslog findcfgl findcfglx htmalloc htrealloc], [], [AC_MSG_ERROR([*** missing function, we can't go without it])])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_SYSLOG], [/* Define to 1 if you have the `syslog\' function. */
+#undef HAVE_SYSLOG])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_FINDCFGL], [/* Define to 1 if you have the `findcfgl\' function. */
+#undef HAVE_FINDCFGL])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_FINDCFGLX], [/* Define to 1 if you have the `findcfglx\' function. */
+#undef HAVE_FINDCFGLX])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_HTMALLOC], [/* Define to 1 if you have the `htmalloc\' function. */
+#undef HAVE_HTMALLOC])
+m4trace:configure.ac:105: -1- AH_OUTPUT([HAVE_HTREALLOC], [/* Define to 1 if you have the `htrealloc\' function. */
+#undef HAVE_HTREALLOC])
+m4trace:configure.ac:111: -1- AC_CONFIG_FILES([Makefile pgworker/Makefile])
+m4trace:configure.ac:113: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs])
+m4trace:configure.ac:113: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])

pgworker/config.h.in

@@ -0,0 +1,148 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the <cfg.h> header file. */
+#undef HAVE_CFG_H
+
+/* Define to 1 if you have the <containers_public.h> header file. */
+#undef HAVE_CONTAINERS_PUBLIC_H
+
+/* Define to 1 if you have the <count.h> header file. */
+#undef HAVE_COUNT_H
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the `findcfgl' function. */
+#undef HAVE_FINDCFGL
+
+/* Define to 1 if you have the `findcfglx' function. */
+#undef HAVE_FINDCFGLX
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define to 1 if you have the `htmalloc' function. */
+#undef HAVE_HTMALLOC
+
+/* Define to 1 if you have the <htmalloc.h> header file. */
+#undef HAVE_HTMALLOC_H
+
+/* Define to 1 if you have the `htrealloc' function. */
+#undef HAVE_HTREALLOC
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `m' library (-lm). */
+#undef HAVE_LIBM
+
+/* Define to 1 if you have the `pq' library (-lpq). */
+#undef HAVE_LIBPQ
+
+/* Define to 1 if you have the <libpq-fe.h> header file. */
+#undef HAVE_LIBPQ_FE_H
+
+/* Define to 1 if you have the `smmapdfw' library (-lsmmapdfw). */
+#undef HAVE_LIBSMMAPDFW
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <queue.h> header file. */
+#undef HAVE_QUEUE_H
+
+/* Define to 1 if you have the <smmapd.h> header file. */
+#undef HAVE_SMMAPD_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `syslog' function. */
+#undef HAVE_SYSLOG
+
+/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/socket.h> header file. */
+#undef HAVE_SYS_SOCKET_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `vfork' function. */
+#undef HAVE_VFORK
+
+/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H
+
+/* Define to 1 if `fork' works. */
+#undef HAVE_WORKING_FORK
+
+/* Define to 1 if `vfork' works. */
+#undef HAVE_WORKING_VFORK
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to the type of arg 1 for `select'. */
+#undef SELECT_TYPE_ARG1
+
+/* Define to the type of args 2, 3 and 4 for `select'. */
+#undef SELECT_TYPE_ARG234
+
+/* Define to the type of arg 5 for `select'. */
+#undef SELECT_TYPE_ARG5
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define as `fork' if `vfork' does not work. */
+#undef vfork

pgworker/configure.ac

@@ -0,0 +1,113 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+
+AC_INIT(pgworker, 0.1, woho@hottis.de)
+AM_INIT_AUTOMAKE(pgworker, 0.1)
+AM_MAINTAINER_MODE
+
+AM_CONFIG_HEADER(config.h)
+
+AC_LANG_C
+
+AC_ARG_WITH(smmapdfw-lib-dir,
+            [AC_HELP_STRING(--with-smmapdfw-lib-dir, [
+                            Directory for smmapdfw library files])],
+            [ case "$withval" in
+                no)
+                  AC_MSG_ERROR(Need smmapdfw-lib-dir)
+                  ;;
+                yes)
+                  ;;
+                *)
+                  LDFLAGS="$LDFLAGS -L$withval -R$withval"
+                  ;;
+            esac ]
+)
+
+AC_ARG_WITH(smmapdfw-inc-dir,
+            [AC_HELP_STRING(--with-smmapdfw-inc-dir, [
+                            Directory for smmapdfw include files])],
+            [ case "$withval" in
+                no)
+                  AC_MSG_ERROR(Need smmapdfw-inc-dir)
+                  ;;
+                yes)
+                  ;;
+                *)
+                  CPPFLAGS="$CPPFLAGS -I$withval"
+                  ;;
+            esac ]
+)
+
+AC_ARG_WITH(pgsql-lib-dir,
+            [AC_HELP_STRING(--with-pgsql-lib-dir, [
+                            Directory for postgres library files])],
+            [ case "$withval" in
+                no)
+		  AC_MSG_ERROR(Need pgsql-lib-dir)
+                  ;;
+                yes)
+                  ;;
+                *)
+                  LDFLAGS="$LDFLAGS -L$withval -R$withval"
+                  ;;
+            esac ]
+)
+
+AC_ARG_WITH(pgsql-inc-dir,
+            [AC_HELP_STRING(--with-pgsql-inc-dir, [
+                            Directory for postgres include files])],
+            [ case "$withval" in
+                no)
+		  AC_MSG_ERROR(Need pgsql-inc-dir)
+                  ;;
+                yes)
+                  ;;
+                *)
+                  CPPFLAGS="$CPPFLAGS -I$withval"
+                  ;;
+            esac ]
+)
+
+
+
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_LIBTOOL
+AC_PROG_MAKE_SET
+
+# Checks for libraries.
+AC_CHECK_LIB([m], [sin])
+AC_CHECK_LIB([pq], [PQstatus])
+AC_CHECK_LIB([smmapdfw], [findcfgl])
+
+
+
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS([stdlib.h string.h strings.h syslog.h unistd.h libpq-fe.h cfg.h containers_public.h smmapd.h htmalloc.h queue.h count.h])
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_SIZE_T
+AC_HEADER_TIME
+
+# Checks for library functions.
+AC_FUNC_FORK
+dnl AC_FUNC_MALLOC
+dnl AC_FUNC_REALLOC
+AC_FUNC_SELECT_ARGTYPES
+AC_CHECK_FUNCS([syslog findcfgl findcfglx htmalloc htrealloc], [],
+               [AC_MSG_ERROR([*** missing function, we can't go without it])])
+
+
+
+
+
+AC_CONFIG_FILES([Makefile pgworker/Makefile])
+
+AC_OUTPUT

pgworker/install-sh

@@ -0,0 +1,269 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+#
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	true
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=mkdir
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		true
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		true
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		true
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS=' 	
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		true
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		true
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

pgworker/missing

@@ -0,0 +1,198 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+# Copyright (C) 1996, 1997, 2001, 2002 Free Software Foundation, Inc.
+# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.in; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+case "$1" in
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing - GNU libit 0.0"
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acinclude.m4' or \`$configure_ac'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`$configure_ac'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`acconfig.h' or \`$configure_ac'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is missing on your system.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+    fi
+    touch $file
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+         system.  You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequirements for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0

pgworker/mkinstalldirs

@@ -0,0 +1,40 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp"
+
+        mkdir "$pathcomp" || lasterr=$?
+
+        if test ! -d "$pathcomp"; then
+  	  errstatus=$lasterr
+        fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here

pgworker/pgworker/Makefile.am

@@ -0,0 +1,4 @@
+lib_LTLIBRARIES = libpg_worker.la
+libpg_worker_la_SOURCES = pg_worker.c
+
+

pgworker/pgworker/Makefile.in

@@ -0,0 +1,358 @@
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+CC = @CC@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+DLLTOOL = @DLLTOOL@
+ECHO = @ECHO@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+HAVE_LIB = @HAVE_LIB@
+LIB = @LIB@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIB = @LTLIB@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+RC = @RC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+
+lib_LTLIBRARIES = libpg_worker.la
+libpg_worker_la_SOURCES = pg_worker.c
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES = 
+LTLIBRARIES =  $(lib_LTLIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libpg_worker_la_LDFLAGS = 
+libpg_worker_la_LIBADD = 
+libpg_worker_la_OBJECTS =  pg_worker.lo
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON =  Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP_ENV = --best
+DEP_FILES =  .deps/pg_worker.P
+SOURCES = $(libpg_worker_la_SOURCES)
+OBJECTS = $(libpg_worker_la_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .lo .o .obj .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+	cd $(top_srcdir) && $(AUTOMAKE) --gnu pgworker/Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-libLTLIBRARIES:
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+
+distclean-libLTLIBRARIES:
+
+maintainer-clean-libLTLIBRARIES:
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	done
+
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+	$(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+	-rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.s.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+libpg_worker.la: $(libpg_worker_la_OBJECTS) $(libpg_worker_la_DEPENDENCIES)
+	$(LINK) -rpath $(libdir) $(libpg_worker_la_LDFLAGS) $(libpg_worker_la_OBJECTS) $(libpg_worker_la_LIBADD) $(LIBS)
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = pgworker
+
+distdir: $(DISTFILES)
+	here=`cd $(top_builddir) && pwd`; \
+	top_distdir=`cd $(top_distdir) && pwd`; \
+	distdir=`cd $(distdir) && pwd`; \
+	cd $(top_srcdir) \
+	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu pgworker/Makefile
+	@for file in $(DISTFILES); do \
+	  d=$(srcdir); \
+	  if test -d $$d/$$file; then \
+	    cp -pr $$d/$$file $(distdir)/$$file; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	  fi; \
+	done
+
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+	-rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+	@echo '$(COMPILE) -c $<'; \
+	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-cp .deps/$(*F).pp .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm .deps/$(*F).pp
+
+%.lo: %.c
+	@echo '$(LTCOMPILE) -c $<'; \
+	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
+	  < .deps/$(*F).pp > .deps/$(*F).P; \
+	tr ' ' '\012' < .deps/$(*F).pp \
+	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+	    >> .deps/$(*F).P; \
+	rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-libLTLIBRARIES
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am: uninstall-libLTLIBRARIES
+uninstall: uninstall-am
+all-am: Makefile $(LTLIBRARIES)
+all-redirect: all-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+	$(mkinstalldirs)  $(DESTDIR)$(libdir)
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
+		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+		mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+		clean-depend clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am:  distclean-libLTLIBRARIES distclean-compile \
+		distclean-libtool distclean-tags distclean-depend \
+		distclean-generic clean-am
+	-rm -f libtool
+
+distclean: distclean-am
+
+maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
+		maintainer-clean-compile maintainer-clean-libtool \
+		maintainer-clean-tags maintainer-clean-depend \
+		maintainer-clean-generic distclean-am
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
+clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
+uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
+distclean-compile clean-compile maintainer-clean-compile \
+mostlyclean-libtool distclean-libtool clean-libtool \
+maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
+distclean-depend clean-depend maintainer-clean-depend info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

pgworker/pgworker/pg_worker.c

@@ -0,0 +1,447 @@
+/*
+    Copyright (C) 2004, 2005 Wolfgang Hottgenroth
+
+    This file is part of smmapdfw-pgworker.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+#include <stdlib.h>
+#include <syslog.h>
+#include <ctype.h>
+
+#include <libpq-fe.h>
+
+#include <containers_public.h>
+
+#include "htmalloc.h"
+#include "htbuffer.h"
+#include "smmapd.h"
+
+
+int pg_worker_init(cfgl_t *cfg, void **handle);
+int pg_worker_destroy(void *handle);
+int pg_worker_work_setup(void *handle, void **work_handle);
+int pg_worker_work_destroy(void *handle, void *work_handle);
+int pg_worker_work(void *handle, void *work_handle, char *input, htbuffer_t *output);
+
+class_descriptor_t pgworker = {
+  "pgworker",
+  &pg_worker_init,
+  &pg_worker_destroy,
+  &pg_worker_work_setup,
+  &pg_worker_work,
+  &pg_worker_work_destroy
+};
+
+
+typedef struct pg_container_handle_s {
+  int counter;
+  cfgl_t *cfg;
+  char *sql_statement;
+  int param_cnt;
+  char *input_delimiter;
+  char *output_format_string;
+  char *dbhost;
+  char *dbname;
+  char *dbuser;
+  char *dbpass;
+  int allow_multiple_result_items;
+  char *multiple_result_item_separator;
+  int consider_many_items_as_failure;
+} pg_container_handle_t;
+
+typedef struct pg_worker_handle_s {
+  int counter;
+  pg_container_handle_t *pch;
+  char **param_array; /* pre-allocated space for separated params */
+  PGconn *dbconn;
+} pg_worker_handle_t;
+
+static int process(pg_worker_handle_t *pwh, char *input, htbuffer_t *output);
+static int count_params(const char *stmt);
+static int break_input(pg_worker_handle_t *pwh, char *input);
+
+
+
+int debug = 0;
+
+
+#define MAX_PARAM_DIGIT_NUM 2
+#define MAX_PARAM_COUNT 99
+static int count_params(const char *stmt) {
+  const char *paramPtr = stmt;
+  const char *spacePtr;
+  char numBuf[MAX_PARAM_DIGIT_NUM + 1];
+  char checkArray[MAX_PARAM_COUNT];
+  int i, x, cnt=0, done, res=0;
+
+  memset(checkArray, 0, MAX_PARAM_COUNT);
+
+  if (debug) syslog(LOG_DEBUG, "pgworker count_params: start %s", paramPtr);
+  while ((paramPtr = strchr(paramPtr, '$')) && (res == 0)) {
+    paramPtr++;
+    if (debug) syslog(LOG_DEBUG, "pgworker count_params: step %s", paramPtr);
+    for (i = 0, done = 0; (i <= MAX_PARAM_DIGIT_NUM) && !done; i++) {
+      if (isdigit(*paramPtr)) {
+	numBuf[i] = *paramPtr;
+	if (debug) syslog(LOG_DEBUG, "pgworker count_params: i=%d, nb=%c", 
+			  i, numBuf[i]);
+	paramPtr++;
+      } else {
+        numBuf[i] = '\0';
+	if (debug) syslog(LOG_DEBUG, "pgworker count_params: end, i=%d, nb=%s", 
+			  i, numBuf);
+	x = atoi(numBuf);
+	if (x == 0) {
+	  syslog(LOG_ERR, "pgworker count_params: failure, x=0");
+	  break;
+	}
+	if (x >= MAX_PARAM_COUNT) {
+	  syslog(LOG_ERR, "pgworker count_params: failure, x > MAX_PARAM_COUNT");
+	  break;
+	}
+	checkArray[x-1] = 1;
+	cnt++;
+	done = 1;
+      }
+    }
+    if (!done) {
+      syslog(LOG_ERR, "pgworker count_params: not done, failure");
+      res = -1;
+      break;
+    }
+  }
+ 
+  if (done) {
+    for (i = 0; (i <= MAX_PARAM_COUNT) && checkArray[i]; i++);
+    if (i != cnt) {
+      syslog(LOG_ERR, 
+	     "pgworker count_params: none continuous sequence of param numbers, failure");
+      res = -1;
+    } else {
+      if (debug) syslog(LOG_DEBUG, "pgworker count_params: %d params", cnt);
+      res = cnt;
+    }
+  }
+
+  if (debug) syslog(LOG_DEBUG, "pgworker count_params: finish, res=%d", res);
+  return res;
+}
+      
+
+
+int pg_worker_init(cfgl_t *cfg, void **handle) {
+  pg_container_handle_t *pch = 
+    (pg_container_handle_t*)htmalloc(sizeof(pg_container_handle_t));
+  pch->counter = 0;
+  pch->cfg = cfg;
+  debug = atoi(findcfglx(pch->cfg, "debug", "0"));
+  pch->sql_statement = findcfgl(pch->cfg, "sql_statement");
+  if (pch->sql_statement == NULL) {
+    syslog(LOG_ERR, "pgworker pg_worker_init: missing SQL statement");
+    return -1;
+  }
+  pch->param_cnt = count_params(pch->sql_statement);
+  if (pch->param_cnt <= 0)
+    return -1;
+  pch->input_delimiter = findcfgl(pch->cfg, "input_delimiter");
+  if ((pch->param_cnt > 1) && (pch->input_delimiter == NULL)) {
+    syslog(LOG_ERR, 
+	   "pgworker pg_worker_init: more than one parameter but no input_delimiter given");
+    return -1;
+  }
+  pch->output_format_string = findcfgl(pch->cfg, "output_format_string");
+  pch->dbhost = findcfgl(pch->cfg, "dbhost");
+  if (pch->dbhost == NULL) {
+    syslog(LOG_ERR, "pgworker pg_worker_init: missing dbhost");
+    return -1;
+  }
+  pch->dbname = findcfgl(pch->cfg, "dbname");
+  if (pch->dbname == NULL) {
+    syslog(LOG_ERR, "pgworker pg_worker_init: missing dbname");
+    return -1;
+  }
+  pch->dbuser = findcfgl(pch->cfg, "dbuser");
+  if (pch->dbuser == NULL) {
+    syslog(LOG_ERR, "pgworker pg_worker_init: missing dbuser");
+    return -1;
+  }
+  pch->dbpass = findcfgl(pch->cfg, "dbpass");
+  if (pch->dbpass == NULL) {
+    syslog(LOG_ERR, "pgworker pg_worker_init: missing dbpass");
+    return -1;
+  }
+
+  pch->allow_multiple_result_items = atoi(findcfglx(pch->cfg, "allow_multiple_result_items", "0"));
+  pch->multiple_result_item_separator = findcfgl(pch->cfg, "multiple_result_item_separator");
+  pch->consider_many_items_as_failure = atoi(findcfglx(pch->cfg, "consider_many_items_as_failure", "0"));
+  if (pch->allow_multiple_result_items && pch->consider_many_items_as_failure) {
+    syslog(LOG_ERR, "pgworker pg_worker_init: allow_multiple_result_items and consider_many_items_as failure exclude each other");
+    return -1;
+  }
+  if (pch->allow_multiple_result_items && ! pch->multiple_result_item_separator) {
+    syslog(LOG_ERR, "pgworker pg_worker_init: multiple result items allowed but no separator given");
+    return -1;
+  }
+  
+  *handle = pch;
+  return 0;
+}
+
+int pg_worker_destroy(void *handle) {
+  pg_container_handle_t *pch = (pg_container_handle_t*)handle;
+  free(pch);
+  return 0;
+}
+
+int pg_worker_work_setup(void *handle, void **work_handle) {
+  pg_worker_handle_t *pwh = 
+    (pg_worker_handle_t*)htmalloc(sizeof(pg_worker_handle_t));
+  pwh->counter = 0;
+  pwh->pch = handle;
+  *work_handle = pwh;
+  pwh->param_array = (char **) htmalloc(sizeof(char*) * pwh->pch->param_cnt);
+  syslog(LOG_DEBUG, "pgworker c=%p w=%p", pwh->pch, pwh);
+  
+  pwh->dbconn = PQsetdbLogin(pwh->pch->dbhost,
+			     NULL,
+			     NULL,
+			     NULL,
+			     pwh->pch->dbname,
+			     pwh->pch->dbuser,
+			     pwh->pch->dbpass);
+  syslog(LOG_DEBUG, "pgworker (%p) pg_worker_work_setup: dbconn=%p", 
+	 pwh, pwh->dbconn);
+
+  return 0;
+}
+
+int pg_worker_work_destroy(void *handle, void *work_handle) {
+  pg_worker_handle_t *pwh = (pg_worker_handle_t*) work_handle;
+  syslog(LOG_DEBUG, "pgworker (%p) pg_worker_destroy: freeing the worker handle", 
+	 pwh);
+  PQfinish(pwh->dbconn);
+  free(pwh->param_array);
+  free(pwh);
+}
+
+int pg_worker_work(void *handle, void *work_handle, char *input, htbuffer_t *output) {
+  int res;
+  pg_worker_handle_t *pwh = (pg_worker_handle_t*) work_handle;
+
+  syslog(LOG_DEBUG, "pgworker (%p) pg_worker_work entered", pwh);
+
+  res = process(pwh, input, output);
+
+  return res;
+}
+
+
+static int break_input(pg_worker_handle_t *pwh, char *input) {
+  char *param, *nextptr;
+  int cnt=0;
+
+  if (pwh->pch->input_delimiter == NULL) {
+    syslog(LOG_DEBUG, "pgworker (%p) break_input: input is %s", pwh, input);
+    pwh->param_array[0] = input;
+  } else {
+    nextptr = input;
+    while (NULL != (param = strstr(nextptr, pwh->pch->input_delimiter))) {
+      *param = '\0';
+      if (cnt >= pwh->pch->param_cnt) {
+	syslog(LOG_ERR, "pgworker (%p) break_input: too much parameters", pwh);
+	return SMM_ILLEGAL_INPUT;
+      }
+      pwh->param_array[cnt] = nextptr;
+      cnt++;
+      syslog(LOG_DEBUG, "pgworker (%p) break_input: param found (cnt=%d): {%s}", 
+	     pwh, cnt, nextptr);
+      nextptr = param + strlen(pwh->pch->input_delimiter);
+    }
+    
+    /* last */
+    if (cnt >= pwh->pch->param_cnt) {
+      syslog(LOG_ERR, "pgworker (%p) break_input: too much parameters", pwh);
+      return SMM_ILLEGAL_INPUT;
+    }
+    pwh->param_array[cnt] = nextptr;
+    cnt++;
+    syslog(LOG_DEBUG, "pgworker (%p) break_input: last param (cnt=%d): {%s}", 
+	   pwh, cnt, nextptr);
+    
+    if (cnt < pwh->pch->param_cnt) {
+      syslog(LOG_ERR, "pgworker (%p) break_input: too few parameters", pwh);
+      return SMM_ILLEGAL_INPUT;
+    }
+
+    syslog(LOG_DEBUG, "pgworker (%p) break_input: end", pwh);
+  }
+
+  return 0;
+}
+
+
+#define MAX_RESULT_DIGIT_NUM 2
+static int populate_output_format(pg_worker_handle_t *pwh, PGresult *pgr, 
+			   htbuffer_t *output, int tuple_num) {
+  const char *formatPtr = pwh->pch->output_format_string;
+  const char *tmpPtr = formatPtr;
+  char numBuf[MAX_PARAM_DIGIT_NUM + 1];
+  char *s;
+  int i, x, cnt=0, done, res=0;
+
+  syslog(LOG_DEBUG, "pgworker (%p) populate_output_format OUTPUT: %s", 
+	 pwh, output->buf);
+
+
+  while ((formatPtr = strchr(formatPtr, '$')) && (res == 0)) {
+    syslog(LOG_DEBUG, "pgworker (%p) populate_output_format tmpPtr: %s, formatPtr: %s, d: %i",
+	   pwh, tmpPtr, formatPtr, formatPtr - tmpPtr);
+    htbuffer_strncat(output, tmpPtr, formatPtr - tmpPtr);
+    syslog(LOG_DEBUG, "pgworker (%p) populate_output_format OUTPUT: %s", 
+	   pwh, output->buf);
+    formatPtr++;
+    for (i = 0, done = 0; (i <= MAX_RESULT_DIGIT_NUM) && !done; i++) {
+      if (isdigit(*formatPtr)) {
+	numBuf[i] = *formatPtr;
+	formatPtr++;
+	tmpPtr = formatPtr;
+      } else {
+        numBuf[i] = '\0';
+	x = atoi(numBuf) - 1;
+	if (x > PQnfields(pgr)) {
+	  syslog(LOG_ERR, 
+		 "pgworker (%p) populate_output_format param num too high");
+	  break;
+	}
+	s = PQgetvalue(pgr, tuple_num, x);
+	syslog(LOG_DEBUG, "pgworker (%p) populate_output_format OUTPUT PARAM: %s", 
+	       pwh, s);
+	htbuffer_strcat(output, s);
+	done = 1;
+      }
+    }
+    if (!done) {
+      syslog(LOG_ERR, "pgworker (%p) populate_outputformat, not done, failure", 
+	     pwh);
+      htbuffer_strcpy(output, "");
+      res = SMM_ILLEGAL_INPUT;
+      break;
+    }
+  }
+
+  if (done == 1) {
+    /* reminds */
+    htbuffer_strncat(output, tmpPtr, formatPtr - tmpPtr);
+    syslog(LOG_DEBUG, "OUTPUT: %s", output->buf);
+  }
+ 
+  return res;
+}
+
+
+static int process(pg_worker_handle_t *pwh, char *input, htbuffer_t *output) {
+  int i, j, t, f, res;
+  char *s;
+  PGresult *pgr;
+
+
+  if (0 == (res = break_input(pwh, input))) {
+    pgr = PQexecParams(pwh->dbconn,
+		       pwh->pch->sql_statement,
+		       pwh->pch->param_cnt,
+		       NULL,
+		       (const char * const *) pwh->param_array,
+		       NULL,
+		       NULL,
+		       0);
+    syslog(LOG_DEBUG, "pgworker (%p) process pgr=%p", pwh, pgr);
+    
+    t = PQntuples(pgr);
+    syslog(LOG_DEBUG, "pgworker (%p) process PQntuples=%d", pwh, t);
+    
+    f = PQnfields(pgr);
+    syslog(LOG_DEBUG, "pgworker (%p) process PQnfields=%d", pwh, f);
+    
+    if (t == 0) {
+      syslog(LOG_DEBUG, "pgworker (%p) process: no output", pwh);
+      res = SMM_NOT_FOUND_NOK;
+    } else if ((t > 1) && pwh->pch->consider_many_items_as_failure) {
+      syslog(LOG_DEBUG, "pgworker (%p) process: many items, considered as failure", pwh);
+      res = SMM_NOT_FOUND_NOK;
+    } else if (t > 0) {
+      t = (pwh->pch->allow_multiple_result_items) ? t : 1;
+      for (i = 0; i < t; i++) {
+	if (i > 0) 
+	  htbuffer_strcat(output, pwh->pch->multiple_result_item_separator);
+	if (NULL == pwh->pch->output_format_string) {
+	  if (f > 1)
+	    syslog(LOG_WARNING, 
+		   "pgworker (%p) process: more than one result fields (%d) but no format string", 
+		   pwh, f);
+	  htbuffer_strcat(output, PQgetvalue(pgr, i, 0));
+	  res = SMM_OK;
+	} else {
+	  if (0 == (res = populate_output_format(pwh, pgr, output, i))) {
+	    syslog(LOG_DEBUG, "pgworker (%p) process: output %s", pwh, output->buf);
+	    res = SMM_OK;
+	  } else {
+	    syslog(LOG_ERR, "pgworker (%p) process failure in population of output", pwh);
+	    break;
+	  }
+	}
+      }
+    }
+
+    PQclear(pgr);
+  }
+
+
+  return res;
+}
+
+/**
+   A:
+   - An instance of the pgworker will get an SQL-statement.
+   - The SQL-statement may contain multiple parameter.
+   - A separator token to be used in the input from sendmail will be defined.
+   - The SQL-statement contains one result parameter.
+   - A cache file can be defined.
+
+   B:
+   - Multiple instances of the pgworker will get exactly the same SQL-statement.
+   - The SQL-statement may contain multiple parameter.
+   - A separator token to be used in the input from sendmail will be defined.
+   - The SQL-statement contains multiple result parameters, usually as many
+     as instances are using it.
+   - A position argument to identify the result parameter for the particular
+     instance will be defined.
+   - If a cache file should be used, the same cache file can be used of 
+     instances using the same SQL-statement.
+   
+   C:
+   - As B, but for each instance a list of position arguments can be given
+     to return multiple output results.
+   - A separator token for the different result items must be given.
+
+   D:
+   - As C, but instead of a separator token a format string must be given.
+
+   E:
+   - As D, but instead of given output positions in a separate list, the 
+     position numbers will be used directly in the format string.
+*/

smmapd_prototype/Cache.py

@@ -0,0 +1,37 @@
+import threading
+import time
+
+from Logging import *
+
+
+
+class Cache(object):
+    def __init__(self, expiration):
+        self.lock = threading.Lock()
+        self.expiration = expiration
+        self.cache = {}
+
+    def put(self, key, value):
+        self.lock.acquire()
+        self.cache[key] = (time.time(), value)
+        debug("cache.put(%s, %s)" % (str(key), str(value)))
+        self.lock.release()
+
+    def get(self, key):
+        try:
+            self.lock.acquire()
+            debug("cache.get(%s)" % str(key))
+            try:
+                timestamp, value = self.cache[key]
+                debug("cache.get found: %s" % value)
+                if (timestamp + self.expiration) < time.time():
+                    debug("cache.get: expired")
+                    del self.cache[key]
+                    raise KeyError
+                return value
+            except KeyError:
+                debug("cache.get: found nothing")
+                return None
+        finally:
+            self.lock.release()
+

smmapd_prototype/CyrusChecker.py

@@ -0,0 +1,27 @@
+from Logging import *
+
+from SendmailSocketMapHandler import smmapBaseHandlerWorker
+from SendmailSocketMapHandler import smmapBaseHandlerContainer
+from SendmailSocketMapHandler import MyPermanentVerifierException
+from SendmailSocketMapHandler import MyTemporaryVerifierException
+
+from VerifierHandler import MySMTP
+
+class MyLMTP(MySMTP):
+    def lhlo(self, param):
+        return self.docmd("lhlo " + param)
+
+class CyrusCheckerWorker(smmapBaseHandlerWorker):
+    OK = "OK"
+    NOK = "NOK"
+    TEMPNOK = "TEMPNOK"
+
+    def execute(self, data):
+        debug("data " + data)
+
+        host, address = data.split('|')
+
+        debug("host: (%s), address: (%s)" % (host, address))
+        
+        return "<OK>"
+    

smmapd_prototype/Logging.py

@@ -0,0 +1,14 @@
+import syslog
+
+
+config = None
+
+def log(data):
+    syslog.syslog(syslog.LOG_INFO, data)
+
+def debug(data):
+    syslog.syslog(syslog.LOG_DEBUG, data)
+
+def openlog(c):
+    config = c
+    syslog.openlog(config.get('Logging', 'ApplID'), syslog.LOG_PID, syslog.LOG_MAIL)

smmapd_prototype/MANIFEST

@@ -0,0 +1,8 @@
+Cache.py
+Logging.py
+SendmailSocketMapHandler.py
+VerifierHandler.py
+setup.py
+smmapd
+smmapd.ini
+verifysender.m4

smmapd_prototype/SendmailSocketMapHandler.py

@@ -0,0 +1,190 @@
+import SocketServer
+import time
+
+from Logging import *
+
+
+class NetStringError(ValueError): pass
+
+def NetStringDecode(s):
+    try:
+        length, data = s.split(':')
+    except ValueError:
+        raise NetStringError, "Separator not found"
+    try:
+        length = int(length)
+    except ValueError:
+        raise NetStringError, "Can not read length"
+    if len(data) != length+1:
+        raise NetStringError, "Data has unexpected length"
+    if data[-1] != ',':
+        raise NetStringError, "End-delimiter not found"
+    return data[:-1]
+
+def NetStringEncode(s):
+    return str(len(s)) + ":" + s + ","
+
+
+class MyPermanentVerifierException(ValueError): pass
+
+class MyTemporaryVerifierException(ValueError): pass
+
+class MyBaseRequestHandler(SocketServer.BaseRequestHandler):
+    def handle(self):
+        debug("Connected from " + str(self.client_address))
+        self.localSetup()
+        while 1:
+            receivedData = self.request.recv(8192)
+            if (receivedData == None) or (len(receivedData) == 0): break
+            debug("Data: (%s)" % receivedData)
+            self.request.sendall(self.process(receivedData))
+        self.request.close();
+        self.localFinish()
+        debug("Disconnected")
+
+    def process(self, data):
+        debug("MyBaseRequestHandler.process")
+        return data
+
+    def localSetup(self): pass
+
+    def localfinish(self): pass
+
+
+class SendmailAdaptor:
+    PERM = "PERM "
+    OK = "OK "
+    NOTFOUND = "NOTFOUND "
+    TEMP = "TEMP "
+
+    def preProcess(self, data):
+        try:
+            data = NetStringDecode(data)
+            klass, data = data.split(' ')
+            return klass, data
+        except NetStringError, arg:
+            raise MyPermanentVerifierException, arg
+        except ValueError:
+            raise MyPermanentVerifierException, "<class> <data> expected, only one found"
+
+    def postProcess(self, data):
+        return NetStringEncode(data)
+
+    def process(self, data):
+        startTime = time.time()
+        try:
+            klass, data2 = self.preProcess(data)
+            arg = self.execute(klass, data2)
+            code = SendmailAdaptor.OK
+        except MyPermanentVerifierException, arg:
+            code, arg = SendmailAdaptor.PERM, str(arg)
+        except MyTemporaryVerifierException, arg:
+            code, arg = SendmailAdaptor.TEMP, str(arg)
+        endTime = time.time()
+        log("Class: %s, Data: %s, Code: %s, Arg: %s, Delay: %f" % (klass, data2, code, arg, endTime-startTime))
+        return self.postProcess(code + arg)
+
+    def execute(self, data):
+        return data
+
+class NullAdaptor(SendmailAdaptor):
+    def preProcess(self, data):
+        return re.compile(r'^(.*?)[\r\n]{1,2}$').match(data).group(1)
+
+    def postProcess(self, data):
+        return data + "\n"
+
+
+class SendmailDispatcher(SendmailAdaptor, MyBaseRequestHandler):
+    pluginContainerObjects = {}
+    
+
+    def registerAll(config):
+        for section in config.get('Daemon', 'Plugins').split(','):
+            SendmailDispatcher.register(section, config)
+
+    registerAll = staticmethod(registerAll)
+    
+
+    def register(section, config):
+        cfg = Config(section, config)
+        className = cfg.get('ContainerClass')
+        moduleName = cfg.get('ContainerModule')
+        if className == None:
+            className = 'smmapBaseHandlerContainer'
+        else:
+            if moduleName == None:
+                moduleName == className
+            m = __import__(moduleName)
+        log("Registering %s, %s" % (section, className))
+        klass = eval("m.%s" % className)
+        containerObject = klass(cfg)
+        containerObject.setup()
+        SendmailDispatcher.pluginContainerObjects[section] = containerObject
+
+    register = staticmethod(register)
+
+
+    def localSetup(self):
+        self.pluginWorkerObjects = {}
+
+    def localFinish(self):
+        for o in self.pluginWorkerObjects.values():
+            o.finish()
+
+    def execute(self, klass, data):
+        if not self.pluginContainerObjects.has_key(klass):
+            raise MyPermanentVerifierException, "Class %s not implemented" % klass
+        elif not self.pluginWorkerObjects.has_key(klass):
+            debug("Instantiate worker %s" % klass)
+            self.pluginWorkerObjects[klass] = self.pluginContainerObjects[klass].getWorker()
+
+        return self.pluginWorkerObjects[klass].execute(data)
+    
+
+class Config(object):
+    def __init__(self, section, config):
+        self.section = section
+        self.config = config
+
+    def getSection(self):
+        return self.section
+
+    def get(self, item):
+        return self.config.get(self.section, item)
+    
+
+class smmapBaseHandlerWorker(object):
+    def __init__(self, container):
+        self.container = container
+
+    def setup(self): pass
+
+    def finish(self): pass
+
+    def execute(self, data):
+        raise NotImplementedError
+
+class smmapBaseHandlerContainer(object):
+    def __init__(self, cfg):
+        self.config = cfg
+        workerClassName = cfg.get('WorkerClass')
+        workerModuleName = cfg.get('WorkerModule')
+        if workerModuleName == None:
+            workerModuleName = workerClassName
+        m = __import__(workerModuleName)
+        self.workerClass = eval("m.%s" % workerClassName)
+
+    def setup(self): pass
+
+    def finish(self): pass
+
+    def getWorker(self):
+        worker = self.workerClass(self)
+        worker.setup()
+        return worker
+
+        
+
+
+

smmapd_prototype/VerifierHandler.py

@@ -0,0 +1,240 @@
+import threading
+import socket
+import Queue
+import re
+import time
+
+#import timeoutsocket
+import DNS
+
+from Logging import *
+
+from Cache import Cache
+
+from SendmailSocketMapHandler import smmapBaseHandlerWorker
+from SendmailSocketMapHandler import smmapBaseHandlerContainer
+from SendmailSocketMapHandler import MyPermanentVerifierException
+from SendmailSocketMapHandler import MyTemporaryVerifierException
+
+
+
+class VerifierHandlerContainer(smmapBaseHandlerContainer):
+    def setup(self):
+        DNS.ParseResolvConf()
+        if self.config.get('EnableCaching').lower() in ('true', 'yes', '1'):
+            debug("enabling cache")
+            self.cache = Cache(int(self.config.get('CacheExpiration')))
+        else:
+            debug("disabling cache")
+            self.cache = None
+        
+
+class VerifierHandlerWorker(smmapBaseHandlerWorker):
+    OK = "OK"
+    NOK = "NOK"
+    TEMPNOK = "TEMPNOK"
+
+    def setup(self):
+        self.zombies = []
+
+    class checker(threading.Thread):
+        def __init__(self, ready, config, host, address):
+            threading.Thread.__init__(self)
+            self.ready = ready
+            self.config = config
+            self.host = host
+            self.address = address
+            
+        def checkAddressAvailability(self):
+            try:
+                debug("Trying " + self.host)
+                s = MySMTP(self.host, float(self.config.get('SMTPTimeOut')))
+                s.helo(self.config.get('SMTPHeloParam'))
+                s.mail(self.config.get('SMTPCheckSender'))
+                s.rcpt(self.address.getAddress())
+                s.quit()
+                result = VerifierHandlerWorker.OK
+            except MySMTPTemporaryException:
+                result = VerifierHandlerWorker.TEMPNOK
+            except MySMTPPermanentException:
+                result = VerifierHandlerWorker.NOK
+            except socket.timeout:
+                result = VerifierHandlerWorker.TEMPNOK
+            except socket.error:
+                result = VerifierHandlerWorker.TEMPNOK
+            return result
+
+        def run(self):
+            self.result = self.checkAddressAvailability()
+            self.ready.put(self.getName())
+            debug("NOTIFIED Host %s, Result %s" % (self.host, self.result))
+
+        def getResult(self):
+            return self.result
+
+        def getHost(self):
+            return self.host
+
+        def getAddress(self):
+            return self.address
+    
+    def checkAvailability(self, mxes, address):
+        ready = Queue.Queue()
+        checkerThreads = {}
+        for m in mxes:
+            checkerThread = VerifierHandlerWorker.checker(ready, self.container.config, m, address)
+            checkerThread.start()
+            checkerThreads[checkerThread.getName()] = checkerThread
+            
+        result = VerifierHandlerWorker.TEMPNOK
+        while 1:
+            debug("%i threads left" % len(checkerThreads))
+            if len(checkerThreads) == 0:
+                debug("no threads left ...")
+                break
+            if result != VerifierHandlerWorker.TEMPNOK:
+                debug("got a permanent result ...")
+                break
+            debug("Waiting for results ...")
+            name = ready.get()
+            checkerThread = checkerThreads[name]
+            checkerThread.join()
+            tempResult = checkerThread.getResult()
+            debug("success, result is " + str(tempResult))
+            if [VerifierHandlerWorker.OK, VerifierHandlerWorker.NOK].count(tempResult) != 0:
+                result = tempResult
+            del checkerThreads[name]
+        self.zombies.extend(checkerThreads.values())
+        return result
+
+    def finish(self):
+        while 1:
+            debug("finish: %i zombies left" % len(self.zombies))
+            for z in self.zombies:
+                if not z.isAlive():
+                    debug("finish: thread %s for %s, %s terminated" % (z.getName(), z.getHost(), z.getAddress().getAddress()))
+                    self.zombies.remove(z)
+            for z in self.zombies:
+                debug("finish: left over %s for %s, %s" % (z.getName(), z.getHost(), z.getAddress().getAddress()))
+            if len(self.zombies) == 0:
+                debug("finish: no zombie left ...")
+                break
+            debug("finish: WAITING")
+            time.sleep(5)
+            debug("finish: CONTINUE")
+        debug("finish: all threads terminated")
+            
+
+    def execute(self, address):
+        debug("address " + address)
+
+        address = EMailAddress(address)
+
+        bestmxes = address.getBestMX()
+        if not bestmxes:
+            return "<NOK> <no bestmx found>"
+
+        if self.container.cache == None:
+            debug("no caching")
+            result = self.checkAvailability(bestmxes, address)
+        else:
+            result = self.container.cache.get(address.getAddress())
+            if result == None:
+                debug("not found in cache")
+                result = self.checkAvailability(bestmxes, address)
+                if result != VerifierHandlerWorker.TEMPNOK:
+                    self.container.cache.put(address.getAddress(), result)
+            else:
+                debug("found in cache")
+
+        if result == VerifierHandlerWorker.OK:
+            return "<OK>"
+        elif result == VerifierHandlerWorker.NOK:
+            return "<NOK> <home server sent a permanent negative answer>"
+        else:
+            raise MyTemporaryVerifierException, "no mx reachable"
+
+
+class MySMTPPermanentException(ValueError): pass
+
+class MySMTPTemporaryException(ValueError): pass
+
+class MySMTP(object):
+    def __init__(self, host, timeout, port=25):
+        self.host = host
+        self.socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+        self.socket.settimeout(timeout)
+        self.socket.connect((host, port))
+        self.socket.recv(8192)
+        self.resPattern = re.compile(r'[\w\W]*?^(\d{3,3}) (.*?)[\r\n]{1,2}$', re.MULTILINE)
+        
+    def checkResult(self, r):
+        code, text = r
+        code = code / 100
+
+        if code == 2:
+            return;
+        elif code == 4:
+            raise MySMTPTemporaryException, text
+        elif code == 5:
+            raise MySMTPPermanentException, text
+        else:
+            raise MySMTPPermanentException, "unknown code: " + str(code) + ", text: " + str(text)
+
+    def docmd(self, cmd):
+        debug("docmd: %s, cmd: %s " % (self.host, cmd))
+        self.socket.sendall(cmd + "\r\n")
+        res = self.socket.recv(8192)
+        debug("docmd: result: (%s)" % res)
+        m = self.resPattern.match(res)
+        return self.checkResult((int(m.group(1)), m.group(2)))
+        
+    def helo(self, param):
+        return self.docmd("helo " + param)
+
+    def mail(self, sender):
+        if sender[0] != '<' and sender[-1] != '>': sender = '<' + sender + '>'
+        return self.docmd("mail from:" + sender)
+
+    def rcpt(self, recipient):
+        return self.docmd("rcpt to:<%s>" % recipient)
+
+    def quit(self):
+        self.docmd("quit")
+        self.socket.close()
+
+
+class EMailAddress(object):
+    def __init__(self, address):
+        self.address = address
+        if self.address[0] == '<' and self.address[-1] == '>': self.address = self.address[1:-1]
+        try:
+            self.userpart, self.domain = self.address.split('@')
+        except ValueError:
+            raise MyPermanentVerifierException, "excepted email address, found not at-sign"
+
+    def getUserPart(self):
+        return self.userpart
+
+    def getDomain(self):
+        return self.domain
+
+    def getAddress(self):
+        return self.address
+
+    def getBestMX(self):
+        if self.domain[0] == '[' and self.domain[-1] == ']':
+            bestmx2 = [self.domain[1:-1]]
+        else:
+            bestmx = DNS.mxlookup(self.domain)
+            pref = None
+            bestmx2 = []
+            for mx in bestmx:
+                if pref == None: pref = mx[0]
+                if pref == mx[0]:
+                    bestmx2.append(mx[1])
+                else:
+                    break
+        debug("bestmx " + str(bestmx2))
+        return bestmx2
+

smmapd_prototype/index.html

@@ -0,0 +1,327 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN">
+<html>
+  <head>
+    <title>Sender Address Verifier for Sendmail</title>
+    <meta name="generator" content="emacs-wiki.el">
+    <meta http-equiv="Content-Type"
+	  content="text/html; charset=iso-8859-1">
+    <link rev="made" href="mailto:woho@hottis.de">
+    <link rel="stylesheet" type="text/css" href="/web/default.css" />
+  </head>
+  <body>
+    <h1>Sender Address Verifier for Sendmail</h1>
+    <!-- Page published by Emacs Wiki begins here -->
+<p>
+Author: Wolfgang Hottgenroth <<a href="mailto:woho@hottis.de">woho@hottis.de</a>>, 2004-05-17
+
+</p>
+
+<p>
+This is the prototype of a sender address verifier for sendmail-8.13.
+
+</p>
+
+<p>
+It consists of a m4 file containing a FEATURE to be included in your
+<code>sendmail.mc</code> and a verifier daemon in a bit of python code.
+
+</p>
+
+<p>
+By including the FEATURE in your sendmail.mc file and running the
+verifier daemon, sendmail file verify either
+
+</p>
+
+<ul>
+<li>all sender addresses (with certain exceptions) or
+</li>
+<li>only certain sender addresses
+</li>
+</ul>
+
+<p>
+This will be done by connecting to the best MX servers of the
+particular domain, trying to send a mail to the particular address and
+collect the replies. 
+
+</p>
+
+<p>
+Actually only the <code>HELO</code>, <code>MAIL</code> and <code>RCPT</code> commands are issued.
+
+</p>
+
+<p>
+If a positive reply was found, the mail is considered as valid.
+
+</p>
+
+<p>
+If a permanent negative reply was found, the mail is considered as
+invalid.
+
+</p>
+
+<p>
+If no MX entry was found, the mail is considered as invalid.
+
+</p>
+
+<p>
+If a temporary negative reply was found, the mail is considered as
+temporary invalid.
+
+</p>
+
+<p>
+If there is more than one best MX server all of these servers are
+connected in parallel and the first permanent reply (either positive
+or negative) is returned.
+
+</p>
+
+<h3>Download</h3>
+
+<p>
+The complete sources: <a href="./download/">download</a>
+
+</p>
+
+<p>
+Have a look into the sources: <a href="http://www.hottis.de/cgi-bin/cvsweb.cgi/sender_verifier/">sources</a>
+
+</p>
+
+<h3>Requirements</h3>
+
+<h4>sendmail</h4>
+
+<p>
+sendmail-8.13 is required, since this thing uses the fresh introduced
+socket map.
+
+</p>
+
+<p>
+Find it <a href="http://www.sendmail.org">here</a> on the sendmail homepage.
+
+</p>
+
+<p>
+Your need to build sendmail with support for the socket map. Include 
+
+</p>
+
+<pre class="example">
+APPENDDEF(`confMAPDEF',`-DSOCKETMAP')
+</pre>
+
+<p>
+in your <code>site.config.m4</code>.
+
+</p>
+
+<h4>Python</h4>
+
+<p>
+Python 2.2 or 2.3 is required. If you have Python 2.3 you must delete
+the <code>import timeoutsocket</code> line from <code>verifier.py</code>.
+
+</p>
+
+<p>
+Additionally the python package <code>python-dns</code> is required. Find it
+<a href="http://pydns.sourceforge.net/">http://pydns.sourceforge.net</a>.
+
+</p>
+
+<h3>Configuration of sendmail</h3>
+
+<p>
+Include the FEATURE in your <code>sendmail.mc</code> file. You need to give two
+parameters:
+
+</p>
+
+<pre class="example">
+FEATURE(`verifysender', `mode', `return')
+</pre>
+
+<p>
+For <code>mode</code> you must give either <code>white</code> or <code>black</code>.
+
+</p>
+
+<dl>
+<dt><code>white</code></dt>
+<dd>
+All sender addresses but those mentioned in the whitelist
+file are verified. Complete addresses or just domains can be listed in
+the file. The default location of the whitelist is
+<code>/etc/mail/verify-white-list</code>. If you need a different location,
+define it to <code>confVERIFIER_WHITELIST</code>.
+</dd>
+<dt><code>black</code></dt>
+<dd>
+only addresses or addresses within domains listed in the
+blacklist file are verified. It is obviously only useful to mention
+domains in the blacklist. The default location of the blacklist is
+<code>/etc/mail/verify-black-list</code>. If you need a different location,
+define it to <code>confVERIFIER_BLACKLIST</code>.
+</dd>
+</dl>
+
+<p>
+Both the blacklist and the whitelist file are maps, they must be
+created with <code>makemap</code>. Therefore the entries need a LHS (the address
+or domain) and a RHS. The actual content of the RHS has NO meaning at
+all.
+
+</p>
+
+<p>
+The FEATURE defines a socket map. The default target of the map is
+<code>inet:8884@127.0.0.1</code>, according to the default setting in
+<code>Config.py</code>. If you need something different, define it to
+<code>confVERIFIER_MAP</code>, but don't forget to also adjust <code>Config.py</code>.
+
+</p>
+
+<h3>Configuration of the verification daemon</h3>
+
+<p>
+The configuration of the daemon is done in the file <code>Config.py</code>.
+
+</p>
+
+<p>
+This is the default of this file:
+
+</p>
+
+<pre class="example">
+[Daemon]
+Address: 127.0.0.1
+Port: 8884
+PidFile: smmapd.pid
+Plugins: Verifier,Verifier2
+
+[Logging]
+ApplId: smmapd
+
+[Verifier]
+ContainerModule: VerifierHandler
+ContainerClass: VerifierHandlerContainer
+WorkerModule: VerifierHandler
+WorkerClass: VerifierHandlerWorker
+EnableCaching: 1
+CacheExpiration: 20
+SMTPTimeOut: 20
+SMTPHeloParam: local
+SMTPCheckSender: &lt;&gt;
+
+[Verifier2]
+ContainerModule: VerifierHandler
+ContainerClass: VerifierHandlerContainer
+WorkerModule: VerifierHandler
+WorkerClass: VerifierHandlerWorker
+EnableCaching: 1
+CacheExpiration: 20
+SMTPTimeOut: 20
+SMTPHeloParam: hottis.de
+SMTPCheckSender: &lt;postmaster@hottis.de&gt;</pre>
+
+<p>
+<code>Port</code> and <code>Address</code> are specifying the socket the daemon should
+listen to for communication with sendmail. These settings must be
+reflected in the <code>confVERIFIER_MAP</code> if you change it.
+
+</p>
+
+<p>
+<code>SMTPTimeOut</code> is the timeout for the communication with the MX servers
+when verifying addresses.
+
+</p>
+
+<p>
+<code>SMTPHeloParam</code> is the parameter the verifier will use with the <code>HELO</code>
+command when verifying.
+
+</p>
+
+<p>
+<code>SMTPCheckSender</code> is the sender address used during
+verifications. You should not change it unless you know what you do to
+avoid verification loops.
+
+</p>
+
+<p>
+Since the verification is a time and resource consuming process,
+results can be cached, which is enabled by default. Set
+<code>EnableCaching</code> to 0 to disable it.
+
+</p>
+
+<p>
+<code>CacheExpiration</code> is the time in seconds an entry in the cache is
+considered as valid. It should be much higher.
+
+</p>
+
+<h3>Operation</h3>
+
+<p>
+Configure sendmail and the daemon according to your needs. Start the
+daemon:
+
+</p>
+
+<pre class="example">
+./verifier.py
+</pre>
+
+<h3>Changes</h3>
+
+<ul>
+<li>According to a comment in comp.mail.sendmail I've introduced a class
+  <code>verifier_fix_white</code> in the FEATURE file, currently containing only
+  the string <code>postmaster</code>. Addresses with userpart in this class will
+  never ever be verified to avoid infinite verifying loops.
+</li>
+</ul>
+
+<h4>2004-05-17</h4>
+
+<ul>
+<li>support plugins
+</li>
+<li>separate container and worker object, thereby enable multiple
+  instances of the same plugins
+</li>
+</ul>
+
+
+    <!-- Page published by Emacs Wiki ends here -->
+    <div class="navfoot">
+      <hr>
+      <table width="100%" border="0" summary="Footer navigation">
+	<tr>
+	  <td width="33%" align="left">
+	    <span class="footdate">UPDATED: 2004-05-17</span>
+	  </td>
+	  <td width="34%" align="center">
+	    <span class="foothome">
+	      
+	    </span>
+	  </td>
+	  <td width="33%" align="right">
+	    
+	  </td>
+	</tr>
+      </table>
+    </div>
+  </body>
+</html>

smmapd_prototype/index.wiki

@@ -0,0 +1,195 @@
+#title Sender Address Verifier for Sendmail
+#style /web/default.css
+
+
+Author: Wolfgang Hottgenroth <woho@hottis.de>, 2004-05-17
+
+
+
+
+This is the prototype of a sender address verifier for sendmail-8.13.
+
+It consists of a m4 file containing a FEATURE to be included in your
+=sendmail.mc= and a verifier daemon in a bit of python code.
+
+
+By including the FEATURE in your sendmail.mc file and running the
+verifier daemon, sendmail file verify either
+
+- all sender addresses (with certain exceptions) or
+- only certain sender addresses
+
+This will be done by connecting to the best MX servers of the
+particular domain, trying to send a mail to the particular address and
+collect the replies. 
+
+Actually only the =HELO=, =MAIL= and =RCPT= commands are issued.
+
+If a positive reply was found, the mail is considered as valid.
+
+If a permanent negative reply was found, the mail is considered as
+invalid.
+
+If no MX entry was found, the mail is considered as invalid.
+
+If a temporary negative reply was found, the mail is considered as
+temporary invalid.
+
+If there is more than one best MX server all of these servers are
+connected in parallel and the first permanent reply (either positive
+or negative) is returned.
+
+
+** Download
+
+The complete sources: [[./download/][download]]
+
+Have a look into the sources: [[http://www.hottis.de/cgi-bin/cvsweb.cgi/sender_verifier/][sources]]
+
+
+
+
+** Requirements
+
+*** sendmail
+
+sendmail-8.13 is required, since this thing uses the fresh introduced
+socket map.
+
+Find it [[http://www.sendmail.org][here]] on the sendmail homepage.
+
+Your need to build sendmail with support for the socket map. Include 
+
+<example>
+APPENDDEF(`confMAPDEF',`-DSOCKETMAP')
+</example>
+
+in your =site.config.m4=.
+
+
+*** Python
+
+Python 2.2 or 2.3 is required. If you have Python 2.3 you must delete
+the =import timeoutsocket= line from =verifier.py=.
+
+Additionally the python package =python-dns= is required. Find it
+[[http://pydns.sourceforge.net/][http://pydns.sourceforge.net]].
+
+
+
+** Configuration of sendmail
+
+Include the FEATURE in your =sendmail.mc= file. You need to give two
+parameters:
+
+<example>
+FEATURE(`verifysender', `mode', `return')
+</example>
+
+For =mode= you must give either =white= or =black=.
+
+=white= :: All sender addresses but those mentioned in the whitelist
+file are verified. Complete addresses or just domains can be listed in
+the file. The default location of the whitelist is
+=/etc/mail/verify-white-list=. If you need a different location,
+define it to =confVERIFIER_WHITELIST=.
+
+=black= :: only addresses or addresses within domains listed in the
+blacklist file are verified. It is obviously only useful to mention
+domains in the blacklist. The default location of the blacklist is
+=/etc/mail/verify-black-list=. If you need a different location,
+define it to =confVERIFIER_BLACKLIST=.
+
+Both the blacklist and the whitelist file are maps, they must be
+created with =makemap=. Therefore the entries need a LHS (the address
+or domain) and a RHS. The actual content of the RHS has NO meaning at
+all.
+
+The FEATURE defines a socket map. The default target of the map is
+=inet:8884@127.0.0.1=, according to the default setting in
+=Config.py=. If you need something different, define it to
+=confVERIFIER_MAP=, but don't forget to also adjust =Config.py=.
+
+
+** Configuration of the verification daemon
+
+The configuration of the daemon is done in the file =Config.py=.
+
+This is the default of this file:
+
+<example>
+[Daemon]
+Address: 127.0.0.1
+Port: 8884
+PidFile: smmapd.pid
+Plugins: Verifier,Verifier2
+
+[Logging]
+ApplId: smmapd
+
+[Verifier]
+ContainerModule: VerifierHandler
+ContainerClass: VerifierHandlerContainer
+WorkerModule: VerifierHandler
+WorkerClass: VerifierHandlerWorker
+EnableCaching: 1
+CacheExpiration: 20
+SMTPTimeOut: 20
+SMTPHeloParam: local
+SMTPCheckSender: <>
+
+[Verifier2]
+ContainerModule: VerifierHandler
+ContainerClass: VerifierHandlerContainer
+WorkerModule: VerifierHandler
+WorkerClass: VerifierHandlerWorker
+EnableCaching: 1
+CacheExpiration: 20
+SMTPTimeOut: 20
+SMTPHeloParam: hottis.de
+SMTPCheckSender: <postmaster@hottis.de></example>
+
+=Port= and =Address= are specifying the socket the daemon should
+listen to for communication with sendmail. These settings must be
+reflected in the =confVERIFIER_MAP= if you change it.
+
+=SMTPTimeOut= is the timeout for the communication with the MX servers
+when verifying addresses.
+
+=SMTPHeloParam= is the parameter the verifier will use with the =HELO=
+command when verifying.
+
+=SMTPCheckSender= is the sender address used during
+verifications. You should not change it unless you know what you do to
+avoid verification loops.
+
+Since the verification is a time and resource consuming process,
+results can be cached, which is enabled by default. Set
+=EnableCaching= to 0 to disable it.
+
+=CacheExpiration= is the time in seconds an entry in the cache is
+considered as valid. It should be much higher.
+
+
+** Operation
+
+Configure sendmail and the daemon according to your needs. Start the
+daemon:
+
+<example>
+./verifier.py
+</example>
+
+
+** Changes
+
+- According to a comment in comp.mail.sendmail I've introduced a class
+  =verifier_fix_white= in the FEATURE file, currently containing only
+  the string =postmaster=. Addresses with userpart in this class will
+  never ever be verified to avoid infinite verifying loops.
+
+*** 2004-05-17
+- support plugins
+- separate container and worker object, thereby enable multiple
+  instances of the same plugins
+

smmapd_prototype/setup.py

@@ -0,0 +1,19 @@
+#!/usr/bin/env python
+
+from distutils.core import setup
+
+setup(name="smmapd",
+      version="0.1",
+      description="Framework for sendmail SocketMap handlers",
+      long_description = """
+A framework to build handlers for the sendmail 8.13 SocketMap,
+together with an implementation of a sender-address verifier,
+together we a sendmail m4 feature file""",
+      author="Wolfgang Hottgenroth",
+      author_email="woho@hottis.de",
+      url="http://www.hottis.de/web/verifier/index.html",
+      py_modules = [ 'SendmailSocketMapHandler', 'Cache', 'Logging', 'VerifierHandler' ],
+      scripts = [ 'smmapd' ],
+      data_files = [('config', ['smmapd.ini']),
+                   ('cf/feature', ['verifysender.m4'])]
+     )

smmapd_prototype/smmapd

@@ -0,0 +1,65 @@
+#!/usr/bin/python
+
+import SocketServer
+import socket
+import os
+import ConfigParser
+import getopt
+import sys
+
+from Logging import *
+from SendmailSocketMapHandler import SendmailDispatcher
+
+
+def usage():
+    print "Usage"
+
+
+try:
+    opts, args = getopt.getopt(sys.argv[1:], "hC:F", ["help", "ConfigFile=", "ForeGround"])
+except getopt.GetoptError:
+    usage()
+    sys.exit(2)
+    
+configFile = '/etc/smmapd.ini'
+foreGround = None
+for o, a in opts:
+    if o in ("-h", "--help"):
+        usage()
+        sys.exit()
+    if o in ("-C", "--ConfigFile"):
+        configFile = a
+    if o in ("-F", "--ForeGround"):
+        foreGround = 1
+
+
+
+config = ConfigParser.ConfigParser()
+config.read(configFile)
+
+openlog(config)
+
+if foreGround:
+    pid = 0
+else:
+    pid = os.fork()
+    
+if pid:
+    pidFile = file(config.get('Daemon', 'PidFile'), mode='w')
+    pidFile.write("%i\n" % pid)
+    pidFile.close()
+    print "daemon started with pid ", pid
+else:
+    log("daemon started")
+
+    SendmailDispatcher.registerAll(config)
+
+    try:
+        address = config.get('Daemon', 'Address')
+        port = int(config.get('Daemon', 'Port'))
+        srv = SocketServer.ThreadingTCPServer((address, port), SendmailDispatcher)
+        srv.serve_forever()
+    except socket.error, arg:
+        log("got a socket error: %s" % str(arg))
+    log("daemon died")
+    

smmapd_prototype/smmapd.ini

@@ -0,0 +1,37 @@
+[Daemon]
+Address: 127.0.0.1
+Port: 8884
+PidFile: smmapd.pid
+Plugins: verifier,verifier2,cyrusChecker
+
+[Logging]
+ApplId: smmapd
+
+[verifier]
+ContainerModule: VerifierHandler
+ContainerClass: VerifierHandlerContainer
+WorkerModule: VerifierHandler
+WorkerClass: VerifierHandlerWorker
+EnableCaching: yes
+CacheExpiration: 20
+SMTPTimeOut: 20
+SMTPHeloParam: local
+SMTPCheckSender: <>
+
+[verifier2]
+ContainerModule: VerifierHandler
+ContainerClass: VerifierHandlerContainer
+WorkerModule: VerifierHandler
+WorkerClass: VerifierHandlerWorker
+EnableCaching: yes
+CacheExpiration: 20
+SMTPTimeOut: 20
+SMTPHeloParam: hottis.de
+SMTPCheckSender: <postmaster@hottis.de>
+
+[cyrusChecker]
+ContainerModule: SendmailSocketMapHandler
+ContainerClass: smmapBaseHandlerContainer
+WorkerModule: CyrusChecker
+WorkerClass: CyrusCheckerWorker
+

smmapd_prototype/timeoutsocket.py

@@ -0,0 +1,424 @@
+
+####
+# Copyright 2000,2001 by Timothy O'Malley <timo@alum.mit.edu>
+# 
+#                All Rights Reserved
+# 
+# Permission to use, copy, modify, and distribute this software
+# and its documentation for any purpose and without fee is hereby
+# granted, provided that the above copyright notice appear in all
+# copies and that both that copyright notice and this permission
+# notice appear in supporting documentation, and that the name of
+# Timothy O'Malley  not be used in advertising or publicity
+# pertaining to distribution of the software without specific, written
+# prior permission. 
+# 
+# Timothy O'Malley DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
+# SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+# AND FITNESS, IN NO EVENT SHALL Timothy O'Malley BE LIABLE FOR
+# ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+# WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+# ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+# PERFORMANCE OF THIS SOFTWARE. 
+#
+####
+
+"""Timeout Socket
+
+This module enables a timeout mechanism on all TCP connections.  It
+does this by inserting a shim into the socket module.  After this module
+has been imported, all socket creation goes through this shim.  As a
+result, every TCP connection will support a timeout.
+
+The beauty of this method is that it immediately and transparently
+enables the entire python library to support timeouts on TCP sockets.
+As an example, if you wanted to SMTP connections to have a 20 second
+timeout:
+
+    import timeoutsocket
+    import smtplib
+    timeoutsocket.setDefaultSocketTimeout(20)
+
+
+The timeout applies to the socket functions that normally block on
+execution:  read, write, connect, and accept.  If any of these 
+operations exceeds the specified timeout, the exception Timeout
+will be raised.
+
+The default timeout value is set to None.  As a result, importing
+this module does not change the default behavior of a socket.  The
+timeout mechanism only activates when the timeout has been set to
+a numeric value.  (This behavior mimics the behavior of the
+select.select() function.)
+
+This module implements two classes: TimeoutSocket and TimeoutFile.
+
+The TimeoutSocket class defines a socket-like object that attempts to
+avoid the condition where a socket may block indefinitely.  The
+TimeoutSocket class raises a Timeout exception whenever the
+current operation delays too long. 
+
+The TimeoutFile class defines a file-like object that uses the TimeoutSocket
+class.  When the makefile() method of TimeoutSocket is called, it returns
+an instance of a TimeoutFile.
+
+Each of these objects adds two methods to manage the timeout value:
+
+    get_timeout()   -->  returns the timeout of the socket or file
+    set_timeout()   -->  sets the timeout of the socket or file
+
+
+As an example, one might use the timeout feature to create httplib
+connections that will timeout after 30 seconds:
+
+    import timeoutsocket
+    import httplib
+    H = httplib.HTTP("www.python.org")
+    H.sock.set_timeout(30)
+
+Note:  When used in this manner, the connect() routine may still
+block because it happens before the timeout is set.  To avoid
+this, use the 'timeoutsocket.setDefaultSocketTimeout()' function.
+
+Good Luck!
+
+"""
+
+__version__ = "$Revision$"
+__author__  = "Timothy O'Malley <timo@alum.mit.edu>"
+
+#
+# Imports
+#
+import select, string
+import socket
+if not hasattr(socket, "_no_timeoutsocket"):
+    _socket = socket.socket
+else:
+    _socket = socket._no_timeoutsocket
+
+
+#
+# Set up constants to test for Connected and Blocking operations.
+# We delete 'os' and 'errno' to keep our namespace clean(er).
+# Thanks to Alex Martelli and G. Li for the Windows error codes.
+#
+import os
+if os.name == "nt":
+    _IsConnected = ( 10022, 10056 )
+    _ConnectBusy = ( 10035, )
+    _AcceptBusy  = ( 10035, )
+else:
+    import errno
+    _IsConnected = ( errno.EISCONN, )
+    _ConnectBusy = ( errno.EINPROGRESS, errno.EALREADY, errno.EWOULDBLOCK )
+    _AcceptBusy  = ( errno.EAGAIN, errno.EWOULDBLOCK )
+    del errno
+del os
+
+
+#
+# Default timeout value for ALL TimeoutSockets
+#
+_DefaultTimeout = None
+def setDefaultSocketTimeout(timeout):
+    global _DefaultTimeout
+    _DefaultTimeout = timeout
+def getDefaultSocketTimeout():
+    return _DefaultTimeout
+
+#
+# Exceptions for socket errors and timeouts
+#
+Error = socket.error
+class Timeout(Exception):
+    pass
+
+
+#
+# Factory function
+#
+from socket import AF_INET, SOCK_STREAM
+def timeoutsocket(family=AF_INET, type=SOCK_STREAM, proto=None):
+    if family != AF_INET or type != SOCK_STREAM:
+        if proto:
+            return _socket(family, type, proto)
+        else:
+            return _socket(family, type)
+    return TimeoutSocket( _socket(family, type), _DefaultTimeout )
+# end timeoutsocket
+
+#
+# The TimeoutSocket class definition
+#
+class TimeoutSocket:
+    """TimeoutSocket object
+    Implements a socket-like object that raises Timeout whenever
+    an operation takes too long.
+    The definition of 'too long' can be changed using the
+    set_timeout() method.
+    """
+
+    _copies = 0
+    _blocking = 1
+    
+    def __init__(self, sock, timeout):
+        self._sock     = sock
+        self._timeout  = timeout
+    # end __init__
+
+    def __getattr__(self, key):
+        return getattr(self._sock, key)
+    # end __getattr__
+
+    def get_timeout(self):
+        return self._timeout
+    # end set_timeout
+
+    def set_timeout(self, timeout=None):
+        self._timeout = timeout
+    # end set_timeout
+
+    def setblocking(self, blocking):
+        self._blocking = blocking
+        return self._sock.setblocking(blocking)
+    # end set_timeout
+
+    def connect_ex(self, addr):
+        errcode = 0
+        try:
+            self.connect(addr)
+        except Error, why:
+            errcode = why[0]
+        return errcode
+    # end connect_ex
+        
+    def connect(self, addr, port=None, dumbhack=None):
+        # In case we were called as connect(host, port)
+        if port != None:  addr = (addr, port)
+
+        # Shortcuts
+        sock    = self._sock
+        timeout = self._timeout
+        blocking = self._blocking
+
+        # First, make a non-blocking call to connect
+        try:
+            sock.setblocking(0)
+            sock.connect(addr)
+            sock.setblocking(blocking)
+            return
+        except Error, why:
+            # Set the socket's blocking mode back
+            sock.setblocking(blocking)
+            
+            # If we are not blocking, re-raise
+            if not blocking:
+                raise
+            
+            # If we are already connected, then return success.
+            # If we got a genuine error, re-raise it.
+            errcode = why[0]
+            if dumbhack and errcode in _IsConnected:
+                return
+            elif errcode not in _ConnectBusy:
+                raise
+            
+        # Now, wait for the connect to happen
+        # ONLY if dumbhack indicates this is pass number one.
+        #   If select raises an error, we pass it on.
+        #   Is this the right behavior?
+        if not dumbhack:
+            r,w,e = select.select([], [sock], [], timeout)
+            if w:
+                return self.connect(addr, dumbhack=1)
+
+        # If we get here, then we should raise Timeout
+        raise Timeout("Attempted connect to %s timed out." % str(addr) )
+    # end connect
+
+    def accept(self, dumbhack=None):
+        # Shortcuts
+        sock     = self._sock
+        timeout  = self._timeout
+        blocking = self._blocking
+
+        # First, make a non-blocking call to accept
+        #  If we get a valid result, then convert the
+        #  accept'ed socket into a TimeoutSocket.
+        # Be carefult about the blocking mode of ourselves.
+        try:
+            sock.setblocking(0)
+            newsock, addr = sock.accept()
+            sock.setblocking(blocking)
+            timeoutnewsock = self.__class__(newsock, timeout)
+            timeoutnewsock.setblocking(blocking)
+            return (timeoutnewsock, addr)
+        except Error, why:
+            # Set the socket's blocking mode back
+            sock.setblocking(blocking)
+
+            # If we are not supposed to block, then re-raise
+            if not blocking:
+                raise
+            
+            # If we got a genuine error, re-raise it.
+            errcode = why[0]
+            if errcode not in _AcceptBusy:
+                raise
+            
+        # Now, wait for the accept to happen
+        # ONLY if dumbhack indicates this is pass number one.
+        #   If select raises an error, we pass it on.
+        #   Is this the right behavior?
+        if not dumbhack:
+            r,w,e = select.select([sock], [], [], timeout)
+            if r:
+                return self.accept(dumbhack=1)
+
+        # If we get here, then we should raise Timeout
+        raise Timeout("Attempted accept timed out.")
+    # end accept
+
+    def send(self, data, flags=0):
+        sock = self._sock
+        if self._blocking:
+            r,w,e = select.select([],[sock],[], self._timeout)
+            if not w:
+                raise Timeout("Send timed out")
+        return sock.send(data, flags)
+    # end send
+
+    def recv(self, bufsize, flags=0):
+        sock = self._sock
+        if self._blocking:
+            r,w,e = select.select([sock], [], [], self._timeout)
+            if not r:
+                raise Timeout("Recv timed out")
+        return sock.recv(bufsize, flags)
+    # end recv
+
+    def makefile(self, flags="r", bufsize=-1):
+        self._copies = self._copies +1
+        return TimeoutFile(self, flags, bufsize)
+    # end makefile
+
+    def close(self):
+        if self._copies <= 0:
+            self._sock.close()
+        else:
+            self._copies = self._copies -1
+    # end close
+
+# end TimeoutSocket
+
+
+class TimeoutFile:
+    """TimeoutFile object
+    Implements a file-like object on top of TimeoutSocket.
+    """
+    
+    def __init__(self, sock, mode="r", bufsize=4096):
+        self._sock          = sock
+        self._bufsize       = 4096
+        if bufsize > 0: self._bufsize = bufsize
+        if not hasattr(sock, "_inqueue"): self._sock._inqueue = ""
+
+    # end __init__
+
+    def __getattr__(self, key):
+        return getattr(self._sock, key)
+    # end __getattr__
+
+    def close(self):
+        self._sock.close()
+        self._sock = None
+    # end close
+    
+    def write(self, data):
+        self.send(data)
+    # end write
+
+    def read(self, size=-1):
+        _sock = self._sock
+        _bufsize = self._bufsize
+        while 1:
+            datalen = len(_sock._inqueue)
+            if datalen >= size >= 0:
+                break
+            bufsize = _bufsize
+            if size > 0:
+                bufsize = min(bufsize, size - datalen )
+            buf = self.recv(bufsize)
+            if not buf:
+                break
+            _sock._inqueue = _sock._inqueue + buf
+        data = _sock._inqueue
+        _sock._inqueue = ""
+        if size > 0 and datalen > size:
+            _sock._inqueue = data[size:]
+            data = data[:size]
+        return data
+    # end read
+
+    def readline(self, size=-1):
+        _sock = self._sock
+        _bufsize = self._bufsize
+        while 1:
+            idx = string.find(_sock._inqueue, "\n")
+            if idx >= 0:
+                break
+            datalen = len(_sock._inqueue)
+            if datalen >= size >= 0:
+                break
+            bufsize = _bufsize
+            if size > 0:
+                bufsize = min(bufsize, size - datalen )
+            buf = self.recv(bufsize)
+            if not buf:
+                break
+            _sock._inqueue = _sock._inqueue + buf
+
+        data = _sock._inqueue
+        _sock._inqueue = ""
+        if idx >= 0:
+            idx = idx + 1
+            _sock._inqueue = data[idx:]
+            data = data[:idx]
+        elif size > 0 and datalen > size:
+            _sock._inqueue = data[size:]
+            data = data[:size]
+        return data
+    # end readline
+
+    def readlines(self, sizehint=-1):
+        result = []
+        data = self.read()
+        while data:
+            idx = string.find(data, "\n")
+            if idx >= 0:
+                idx = idx + 1
+                result.append( data[:idx] )
+                data = data[idx:]
+            else:
+                result.append( data )
+                data = ""
+        return result
+    # end readlines
+
+    def flush(self):  pass
+
+# end TimeoutFile
+
+
+#
+# Silently replace the socket() builtin function with
+# our timeoutsocket() definition.
+#
+if not hasattr(socket, "_no_timeoutsocket"):
+    socket._no_timeoutsocket = socket.socket
+    socket.socket = timeoutsocket
+del socket
+socket = timeoutsocket
+# Finis

smmapd_prototype/verifysender.m4

@@ -0,0 +1,110 @@
+VERSIONID(`$Id$')
+
+
+
+divert(-1)
+
+define(`_USAGE_', `dnl
+errprint(`*** ERROR: missing argument for FEATURE(verifysender):
+Usage: FEATURE(`verifysender', `_mode_', `_return_')
+  _mode_: black or white
+  _return_: temp or perm
+  found: $1
+')')
+
+ifelse(_ARG_, `black', `', `
+ifelse(_ARG_, `white', `', `
+_USAGE_(`_mode_: ('_ARG_`)
+')
+')')
+
+ifelse(_ARG2_, `temp', `', `
+ifelse(_ARG2_, `perm', `', `
+_USAGE_(`_return_: ('_ARG2_`)
+')
+')')
+
+define(`_mode_', _ARG_)
+define(`_return_', _ARG2_)
+
+errprint(`*** _mode_: '_mode_`
+')
+errprint(`*** _return_: '_return_`
+')
+
+
+define(`_T_DSN_', `4.1.0')
+define(`_T_REPLY', `451')
+ifelse(_return_, `temp', `
+define(`_DSN_', _T_DSN_)
+define(`_REPLY_', _T_REPLY)', `dnl
+define(`_DSN_', `5.1.0')
+define(`_REPLY_', `550')')
+
+ifelse(defn(`confVERIFIER_MAP'), `', `
+define(`_VERIFIER_MAP_', `inet:8884@127.0.0.1')', `
+define(`_VERIFIER_MAP_', confVERIFIER_MAP)')
+
+ifelse(defn(`confVERIFIER_BLACKLIST'), `', `
+define(`_VERIFIER_BLACKLIST_', `/etc/mail/verifier-black-list')', `
+define(`_VERIFIER_BLACKLIST_', confVERIFIER_BLACKLIST)')
+
+ifelse(defn(`confVERIFIER_WHITELIST'), `', `
+define(`_VERIFIER_WHITELIST_', `/etc/mail/verifier-white-list')', `
+define(`_VERIFIER_WHITELIST_', confVERIFIER_WHITELIST)')
+
+divert(0)
+
+LOCAL_CONFIG
+# Adjust the port
+Kverifier socket -T<temp> _VERIFIER_MAP_
+ifelse(_mode_, `white', `dnl
+Kverifier_helper hash -o _VERIFIER_WHITELIST_', `dnl
+Kverifier_helper hash _VERIFIER_BLACKLIST_')
+C{verifier_fix_white} postmaster
+
+LOCAL_RULESETS
+# This ruleset can be used to test the verifier in -bt mode
+Svt
+R$+					$: < $(verifier $1 $:none $) >
+
+Sverifier0
+R< $={verifier_fix_white} @ $+ >	$@ < ok >
+R< $+ @ $+ >				$: < $2 > < $(verifier_helper $1 @ $2 $: $) >
+R< $+ > <  >				$: < $(verifier_helper $1 $: $) >
+ifelse(_mode_, `white', `dnl
+dnl if we found nothing in the whitelist, we continue with checking
+R<  >					$@ < cont >
+dnl if we found something in the whitelist, we skip further verifications
+R< $+ >					$@ < ok >', `dnl
+dnl if we found nothing in the blacklist, we skip further verifications
+R<  >					$@ < ok >
+dnl if we found something in the blacklist, we continue with checking
+R< $+ >					$@ < cont >')
+
+Sverifier1
+R< $+ >					$: < $(verifier $1 $:none $) >
+R< $* < temp > >			$#error $@ _T_DSN_ $: "_T_REPLY_ Sender Address could currently not be verified (1)"
+R< none >				$#error $@ _T_DSN_ $: "_T_REPLY_ Sender Address could currently not be verified (2)"
+R< <OK> $* >				$@ < ok >
+R< <NOK> < $* > >			$#error $@ _DSN_ $: "_REPLY_ Sender Address was verified as bad: " $1
+R< <TNOK> < $* > >			$#error $@ _T_DSN_ $: "_T_REPLY_ Sender Address could currently not be verified (3): " $1
+dnl if we get here, some is wrong with our code
+R$*					$#error $@ 4.7.1 $: "451 Local configuration error <sv1>"
+
+
+SLocal_check_mail
+dnl MAILER-DAEMON address must not be verified
+R<>					$@ <>
+dnl try to focus
+R$+					$: <> $>3 $1
+R<> $+ < @ $+ . >			$: < $1 @ $2 >
+R<> $+ < @ $+ >				$: < $1 @ $2 >
+dnl if unable to focus, rest of check_mail should take care (may be we should reject)
+R<> $*					$@ OK
+R< $+ @ $+ >				$: < $1 @ $2 > $>verifier0 < $1 @ $2 >
+R< $+ @ $+ > < cont >			$: < $1 @ $2 > $>verifier1 < $1 @ $2 >
+R< $+ @ $+ > $# $* 			$# $3
+R< $+ @ $+ > < ok >			$@ OK
+dnl if we get here, some is wrong with our code
+R$*					$#error $@ 4.7.1 $: "451 Local configuration error <sv2>"

smmapdfw/AUTHORS

@@ -1 +1 @@
-#AUTHOR# <#EMAIL#>
+Wolfgang Hottgenroth <woho@hottis.de>

smmapdfw/ChangeLog

@@ -0,0 +1 @@
+2004-11-09: 0.94: first public release

smmapdfw/INSTALL

@@ -0,0 +1 @@
+See doc/smmapdfw.info please.

smmapdfw/Makefile.am

@@ -1,2 +1,3 @@
-SUBDIRS = libsmmapdfw smmapd verify_worker test_worker cyrus_worker
+SUBDIRS = libsmmapdfw verify_worker test_worker cyrus_worker recpverify_worker rateconn_worker smmapd doc m4 
+
 

smmapdfw/Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,142 +12,237 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-
-SHELL = @SHELL@
-
+@SET_MAKE@
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-host_alias = @host_alias@
+build_triplet = @build@
 host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+	config.guess config.sub depcomp install-sh ltmain.sh missing \
+	mkinstalldirs
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
 AR = @AR@
-AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
 BDB_LIBS = @BDB_LIBS@
 CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
 CXX = @CXX@
 CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
 ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 F77 = @F77@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-HAVE_LIB = @HAVE_LIB@
-LIB = @LIB@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
-LTLIB = @LTLIB@
+LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
-OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
-RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = libsmmapdfw verify_worker test_worker cyrus_worker recpverify_worker rateconn_worker smmapd doc m4 
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
-SUBDIRS = libsmmapdfw smmapd verify_worker test_worker cyrus_worker
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = 
-DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
-Makefile.am Makefile.in NEWS aclocal.m4 config.guess config.h.in \
-config.sub configure configure.ac install-sh ltmain.sh missing \
-mkinstalldirs
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
 .SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
+am--refresh:
+	@:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.ac 
-	cd $(srcdir) && $(ACLOCAL)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 
-config.h: stamp-h
+config.h: stamp-h1
 	@if test ! -f $@; then \
-		rm -f stamp-h; \
-		$(MAKE) stamp-h; \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
 	else :; fi
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
-	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
-	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
-	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
 	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
+	rm -f stamp-h1
+	touch $@
 
 distclean-hdr:
-	-rm -f config.h
+	-rm -f config.h stamp-h1
 
-maintainer-clean-hdr:
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -153,13 +250,14 @@ maintainer-clean-hdr:
 # (1) if the variable is set in `config.status', edit `config.status'
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive  \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -171,7 +269,7 @@ check-recursive installcheck-recursive info-recursive dvi-recursive:
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
@@ -179,13 +277,24 @@ check-recursive installcheck-recursive info-recursive dvi-recursive:
 
 mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
-	@set fnord $(MAKEFLAGS); amf=$$2; \
-	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" != "." || dot_seen=yes; \
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
 	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
 	target=`echo $@ | sed s/-recursive//`; \
 	for subdir in $$rev; do \
 	  echo "Making $$target in $$subdir"; \
@@ -195,184 +304,314 @@ maintainer-clean-recursive:
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
 
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
 
-mostlyclean-tags:
-
-clean-tags:
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	-rm -f TAGS ID
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-maintainer-clean-tags:
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(mkdir_p) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
 
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
 # tarfile.
 distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
 	  && $(MAKE) $(AM_MAKEFLAGS) install \
 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
 check-am: all-am
 check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am:
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
 install-exec: install-exec-recursive
-
-install-data-am:
 install-data: install-data-recursive
+uninstall: uninstall-recursive
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile config.h
-all-redirect: all-recursive-am
+
+installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-recursive
 
-clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 
-clean: clean-recursive
+pdf: pdf-recursive
 
-distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
-	-rm -f libtool
+pdf-am:
 
-distclean: distclean-recursive
-	-rm -f config.status
+ps: ps-recursive
 
-maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+ps-am:
 
-maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
+uninstall-am: uninstall-info-am
 
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-install-data-recursive uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+uninstall-info: uninstall-info-recursive
 
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+	check-am clean clean-generic clean-libtool clean-recursive \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-shar dist-tarZ dist-zip distcheck distclean \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-recursive distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-am uninstall-info-am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

smmapdfw/README

@@ -0,0 +1 @@
+See doc/smmapd.info please.

smmapdfw/config.h.in

@@ -1,7 +1,10 @@
 /* config.h.in.  Generated from configure.ac by autoheader.  */
 
-/* enable verify cache */
-#undef ENABLE_VERIFY_CACHE
+/* enable cache */
+#undef ENABLE_CACHE
+
+/* enable Net-SNMP */
+#undef ENABLE_NETSNMP
 
 /* Define to 1 if you have the <arpa/inet.h> header file. */
 #undef HAVE_ARPA_INET_H
@@ -33,6 +36,9 @@
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
+/* Define to 1 if you have the `djbdns' library (-ldjbdns). */
+#undef HAVE_LIBDJBDNS
+
 /* Define to 1 if you have the `dl' library (-ldl). */
 #undef HAVE_LIBDL
 
@@ -165,7 +171,7 @@
 /* Define to `int' if <sys/types.h> does not define. */
 #undef pid_t
 
-/* Define to `unsigned' if <sys/types.h> does not define. */
+/* Define to `unsigned int' if <sys/types.h> does not define. */
 #undef size_t
 
 /* Define as `fork' if `vfork' does not work. */

smmapdfw/config.sub

@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   Inc.
 
-timestamp='2004-06-24'
+timestamp='2006-09-20'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +22,15 @@ timestamp='2004-06-24'
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
 #
@@ -70,7 +72,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -83,11 +85,11 @@ Try \`$me --help' for more information."
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -99,7 +101,7 @@ while test $# -gt 0 ; do
     *local*)
        # First pass through any local machine types.
        echo $1
-       exit 0;;
+       exit ;;
 
     * )
        break ;;
@@ -118,8 +120,9 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -170,6 +173,10 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -186,6 +193,10 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -230,14 +241,16 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
 	| fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | mcore \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -246,6 +259,7 @@ case $basic_machine in
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
@@ -254,20 +268,24 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
-	| strongarm \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
@@ -278,6 +296,9 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -297,8 +318,8 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
-	| bs2000-* \
+	| avr-* | avr32-* \
+	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
@@ -308,9 +329,9 @@ case $basic_machine in
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -319,6 +340,7 @@ case $basic_machine in
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
@@ -327,24 +349,27 @@ case $basic_machine in
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
+	| mt-* \
 	| msp430-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
@@ -457,6 +482,9 @@ case $basic_machine in
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
@@ -486,6 +514,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -676,6 +708,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -751,9 +786,8 @@ case $basic_machine in
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
 		;;
 	os400)
 		basic_machine=powerpc-ibm
@@ -784,6 +818,12 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -840,6 +880,10 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -866,6 +910,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -1026,6 +1074,10 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
@@ -1075,13 +1127,10 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1154,20 +1203,23 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1185,7 +1237,7 @@ case $os in
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
@@ -1294,6 +1346,9 @@ case $os in
 	-kaos*)
 		os=-kaos
 		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
 	-none)
 		;;
 	*)
@@ -1316,6 +1371,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1325,9 +1386,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1371,6 +1432,9 @@ case $basic_machine in
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
@@ -1542,7 +1606,7 @@ case $basic_machine in
 esac
 
 echo $basic_machine$os
-exit 0
+exit
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

smmapdfw/configure.ac

@@ -2,10 +2,11 @@
 # Process this file with autoconf to produce a configure script.
 
 
-AC_INIT(smmapdfw, 0.9, woho@hottis.de)
-AM_INIT_AUTOMAKE(smmapdfw, 0.9)
+AC_INIT(smmapdfw, 0.99-5, woho@hottis.de)
+AM_INIT_AUTOMAKE(smmapdfw, 0.99-5)
 AM_MAINTAINER_MODE
 
+
 AM_CONFIG_HEADER(config.h)
 
 AC_LANG_C
@@ -15,14 +16,14 @@ AC_ARG_WITH(bdb-lib-dir,
                             Directory for Berkeley DB library files])],
             [ case "$withval" in
                 no)
-                  if test "x$ENABLE_VERIFY_CACHE" = "x1"; then  
+                  if test "x$ENABLE_CACHE" = "x1"; then  
                     AC_MSG_ERROR(Need bdb-lib-dir)
                   fi
                   ;;
                 yes)
                   ;;
                 *)
-                  LDFLAGS="$LDFLAGS -L$withval -R$withval"
+                  LDFLAGS="$LDFLAGS -L$withval"
                   ;;
             esac ]
 )
@@ -32,7 +33,7 @@ AC_ARG_WITH(bdb-inc-dir,
                             Directory for Berkeley include files])],
             [ case "$withval" in
                 no)
-                  if test "x$ENABLE_VERIFY_CACHE" = "x1"; then  
+                  if test "x$ENABLE_CACHE" = "x1"; then  
                     AC_MSG_ERROR(Need bdb-inc-dir)
                   fi
                   ;;
@@ -44,8 +45,99 @@ AC_ARG_WITH(bdb-inc-dir,
             esac ]
 )
 
+WITHOUT_DJBDNS=0
+AC_ARG_WITH(djbdns-lib-dir,
+            [AC_HELP_STRING(--with-djbdns-lib-dir, [
+                            Directory for Bernstein's djbdns library files])],
+            [ case "$withval" in
+                no)
+		  WITHOUT_DJBDNS=1
+                  ;;
+                yes)
+                  ;;
+                *)
+                  LDFLAGS="$LDFLAGS -L$withval"
+                  ;;
+            esac ]
+)
 
-ENABLE_VERIFY_CACHE=1
+AC_ARG_WITH(djbdns-inc-dir,
+            [AC_HELP_STRING(--with-djbdns-inc-dir, [
+                            Directory for Bernstein's djbdns include files])],
+            [ case "$withval" in
+                no)
+                  WITHOUT_DJBDNS=1
+                  ;;
+                yes)
+                  ;;
+                *)
+                  CPPFLAGS="$CPPFLAGS -I$withval"
+                  ;;
+            esac ]
+)
+
+
+
+WITHOUT_NETSNMP=1
+AC_ARG_WITH(netsnmp,
+            [AC_HELP_STRING(--with-netsnmp, [
+                            With Net-SNMP])],
+            [ case "$withval" in
+                no)
+		  WITHOUT_NETSNMP=1
+                  ;;
+                *)
+                  WITHOUT_NETSNMP=0
+                  ;;
+            esac ]
+)
+
+
+AC_ARG_WITH(netsnmp-lib-dir,
+            [AC_HELP_STRING(--with-netsnmp-lib-dir, [
+                            Directory for Net-SNMP library files])],
+            [ case "$withval" in
+                no)
+                  ;;
+                yes)
+                  ;;
+                *)
+                  LDFLAGS="$LDFLAGS -L$withval"
+                  ;;
+            esac ]
+)
+
+AC_ARG_WITH(netsnmp-inc-dir,
+            [AC_HELP_STRING(--with-netsnmp-inc-dir, [
+                            Directory for Net-SNMP include files])],
+            [ case "$withval" in
+                no)
+                  ;;
+                yes)
+                  ;;
+                *)
+                  CPPFLAGS="$CPPFLAGS -I$withval"
+                  ;;
+            esac ]
+)
+
+NETSNMP_BINDIR=""
+AC_ARG_WITH(netsnmp-bin-dir,
+            [AC_HELP_STRING(--with-netsnmp-bin-dir, [
+                            Directory for Net-SNMP bin files, specifically net-snmp-config])],
+            [ case "$withval" in
+                no)
+                  ;;
+                yes)
+                  ;;
+                *)
+                  NETSNMP_BINDIR="$withval/"
+                  ;;
+            esac ]
+)
+
+
+ENABLE_CACHE=1
 dnl AC_ARG_ENABLE(verify-cache, 
 dnl               [AC_HELP_STRING(--enable-verify-cache, [ 
 dnl                               Enables the cache in the verify worker. 
@@ -80,7 +172,6 @@ dnl   cyrus_BUILD=libcyrus_worker.la
 dnl )
 
 
-
 # Checks for programs.
 AC_PROG_CC
 AC_PROG_LIBTOOL
@@ -100,11 +191,21 @@ AC_CHECK_LIB(pthread, pthread_create,
              )
 )
 
-
 AC_CHECK_LIB([resolv], [inet_aton])
 AC_CHECK_LIB([socket], [connect])
 
 
+ENABLE_NETSNMP=0
+if test "x$WITHOUT_NETSNMP" = "x0"; then
+NET_SNMP_CONFIG=$NETSNMP_BINDIR"net-snmp-config"
+NETSNMP_LIBS_1=`$NET_SNMP_CONFIG --agent-libs`
+NETSNMP_LIBS_2=`$NET_SNMP_CONFIG --libs`
+LIBS="$LIBS $NETSNMP_LIBS_1 $NETSNMP_LIBS_2"
+ENABLE_NETSNMP=1
+fi
+
+
+
 # Checks for header files.
 AC_HEADER_STDC
 AC_CHECK_HEADERS([arpa/inet.h fcntl.h netinet/in.h stdlib.h string.h strings.h sys/socket.h syslog.h unistd.h dlfcn.h])
@@ -130,7 +231,7 @@ AC_CHECK_FUNCS([inet_ntoa memset select socket strchr strdup strerror strrchr st
 
 
 
-if test "x$ENABLE_VERIFY_CACHE" = "x1"; then
+if test "x$ENABLE_CACHE" = "x1"; then
 AC_CHECK_LIB([db], [__db_ndbm_open],
              [ BDB_LIBS="-ldb" ],
 	     AC_CHECK_LIB([db], [__db_ndbm_open_4002],
@@ -148,12 +249,18 @@ fi
 
 AC_SUBST(BDB_LIBS)
 
-if test "x$BDB_NOT_FOUND" = "x1"; then
-  echo "*** no db/dbm found, disabling verify cache"
-  ENABLE_VERIFY_CACHE=0
+if test "x$WITHOUT_DJBDNS" = "x0"; then
+AC_CHECK_LIB([djbdns], [dns_transmit_start])
 fi
 
-AC_DEFINE_UNQUOTED(ENABLE_VERIFY_CACHE, ${ENABLE_VERIFY_CACHE}, [enable verify cache])
+
+if test "x$BDB_NOT_FOUND" = "x1"; then
+  echo "*** no db/dbm found, disabling verify cache"
+  ENABLE_CACHE=0
+fi
+
+AC_DEFINE_UNQUOTED(ENABLE_CACHE, ${ENABLE_CACHE}, [enable cache])
+AC_DEFINE_UNQUOTED(ENABLE_NETSNMP, ${ENABLE_NETSNMP}, [enable Net-SNMP])
 
 
 
@@ -163,6 +270,6 @@ dnl AC_SUBST(test_BUILD)
 dnl AC_SUBST(cyrus_BUILD)
 
 
-AC_CONFIG_FILES([Makefile libsmmapdfw/Makefile smmapd/Makefile test_worker/Makefile verify_worker/Makefile cyrus_worker/Makefile])
+AC_CONFIG_FILES([Makefile libsmmapdfw/Makefile smmapd/Makefile test_worker/Makefile verify_worker/Makefile cyrus_worker/Makefile recpverify_worker/Makefile rateconn_worker/Makefile doc/Makefile m4/Makefile])
 
 AC_OUTPUT

smmapdfw/cyrus_worker/Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,180 +12,268 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-
-SHELL = @SHELL@
+@SET_MAKE@
 
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-host_alias = @host_alias@
+build_triplet = @build@
 host_triplet = @host@
+subdir = cyrus_worker
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(libdir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libcyrus_worker_la_DEPENDENCIES = ../libsmmapdfw/libsmmapdfw.la
+am_libcyrus_worker_la_OBJECTS = cyrus_worker.lo
+libcyrus_worker_la_OBJECTS = $(am_libcyrus_worker_la_OBJECTS)
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libcyrus_worker_la_SOURCES)
+DIST_SOURCES = $(libcyrus_worker_la_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
 AR = @AR@
-AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
 BDB_LIBS = @BDB_LIBS@
 CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
 CXX = @CXX@
 CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
 ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 F77 = @F77@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-HAVE_LIB = @HAVE_LIB@
-LIB = @LIB@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
-LTLIB = @LTLIB@
+LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
-OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
-RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
-
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
 lib_LTLIBRARIES = libcyrus_worker.la
 libcyrus_worker_la_SOURCES = cyrus_worker.c
 libcyrus_worker_la_LIBADD = ../libsmmapdfw/libsmmapdfw.la
-
 INCLUDES = -I../libsmmapdfw
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-LTLIBRARIES =  $(lib_LTLIBRARIES)
+all: all-am
 
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I..
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-libcyrus_worker_la_LDFLAGS = 
-libcyrus_worker_la_DEPENDENCIES =  ../libsmmapdfw/libsmmapdfw.la
-libcyrus_worker_la_OBJECTS =  cyrus_worker.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-DEP_FILES =  .deps/cyrus_worker.P
-SOURCES = $(libcyrus_worker_la_SOURCES)
-OBJECTS = $(libcyrus_worker_la_OBJECTS)
-
-all: all-redirect
 .SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu cyrus_worker/Makefile
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  cyrus_worker/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  cyrus_worker/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-libLTLIBRARIES:
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-
-distclean-libLTLIBRARIES:
-
-maintainer-clean-libLTLIBRARIES:
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	    f=$(am__strip_dir) \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  p=$(am__strip_dir) \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
-
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libcyrus_worker.la: $(libcyrus_worker_la_OBJECTS) $(libcyrus_worker_la_DEPENDENCIES) 
+	$(LINK) -rpath $(libdir) $(libcyrus_worker_la_LDFLAGS) $(libcyrus_worker_la_OBJECTS) $(libcyrus_worker_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
-	-rm -f *.o core *.core
 	-rm -f *.$(OBJEXT)
 
-clean-compile:
-
 distclean-compile:
 	-rm -f *.tab.c
 
-maintainer-clean-compile:
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cyrus_worker.Plo@am__quote@
 
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+.c.o:
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+.c.obj:
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -192,170 +282,178 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
 
-maintainer-clean-libtool:
-
-libcyrus_worker.la: $(libcyrus_worker_la_OBJECTS) $(libcyrus_worker_la_DEPENDENCIES)
-	$(LINK) -rpath $(libdir) $(libcyrus_worker_la_LDFLAGS) $(libcyrus_worker_la_OBJECTS) $(libcyrus_worker_la_LIBADD) $(LIBS)
-
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
 
-mostlyclean-tags:
-
-clean-tags:
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = cyrus_worker
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu cyrus_worker/Makefile
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
-
-DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-
--include $(DEP_FILES)
-
-mostlyclean-depend:
-
-clean-depend:
-
-distclean-depend:
-	-rm -rf .deps
-
-maintainer-clean-depend:
-
-%.o: %.c
-	@echo '$(COMPILE) -c $<'; \
-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm .deps/$(*F).pp
-
-%.lo: %.c
-	@echo '$(LTCOMPILE) -c $<'; \
-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-	  < .deps/$(*F).pp > .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm -f .deps/$(*F).pp
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am: install-libLTLIBRARIES
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
 install-exec: install-exec-am
-
-install-data-am:
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-libLTLIBRARIES
-uninstall: uninstall-am
-all-am: Makefile $(LTLIBRARIES)
-all-redirect: all-am
+
+installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-	$(mkinstalldirs)  $(DESTDIR)$(libdir)
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
-		mostlyclean-generic
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-am
 
-clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
-		clean-depend clean-generic mostlyclean-am
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
 
-clean: clean-am
+pdf: pdf-am
 
-distclean-am:  distclean-libLTLIBRARIES distclean-compile \
-		distclean-libtool distclean-tags distclean-depend \
-		distclean-generic clean-am
-	-rm -f libtool
+pdf-am:
 
-distclean: distclean-am
+ps: ps-am
 
-maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-tags maintainer-clean-depend \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+ps-am:
 
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
-distclean-compile clean-compile maintainer-clean-compile \
-mostlyclean-libtool distclean-libtool clean-libtool \
-maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir mostlyclean-depend \
-distclean-depend clean-depend maintainer-clean-depend info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-install-exec install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES
 
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libLTLIBRARIES clean-libtool ctags distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-info-am \
+	uninstall-libLTLIBRARIES
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

smmapdfw/cyrus_worker/cyrus_worker.c

@@ -1,3 +1,23 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
 #include <stdlib.h>
 #include <syslog.h>
 #include <string.h>
@@ -6,16 +26,37 @@
 #include "smmapd.h"
 
 #include "smtp.h"
-#include "dns.h"
+#include "htdns.h"
+#include "htmalloc.h"
+#include "htbuffer.h"
+#include "stats.h"
 
 #define SMM_LOCAL_PERM_NOK 101
 #define SMM_LOCAL_TEMP_NOK 102
 #define SMM_LOCAL_OK       103
 
 
+counterDef_t *cyrus_counterDefs = NULL;
+void cyrus_setupCounterList() {
+  cyrus_counterDefs = addOneCounterDef(cyrus_counterDefs, SMM_TYPE_COUNTER, "Cyrus: checker");
+  cyrus_counterDefs = addOneCounterDef(cyrus_counterDefs, SMM_TYPE_COUNTER, "Cyrus: illegal input");
+  cyrus_counterDefs = addOneCounterDef(cyrus_counterDefs, SMM_TYPE_COUNTER, "Cyrus: depot dns failure");
+  cyrus_counterDefs = addOneCounterDef(cyrus_counterDefs, SMM_TYPE_COUNTER, "Cyrus: returned OK");
+  cyrus_counterDefs = addOneCounterDef(cyrus_counterDefs, SMM_TYPE_COUNTER, "Cyrus: returned NOK");
+  cyrus_counterDefs = addOneCounterDef(cyrus_counterDefs, SMM_TYPE_COUNTER, "Cyrus: returned TNOK");
+};
+
+#define STAT_CNT_CYRUS_WORKER 0
+#define STAT_CNT_CYRUS_ILLEGAL_INPUT 1
+#define STAT_CNT_CYRUS_DEPOT_DNS_FAILURE 2
+#define STAT_CNT_CYRUS_RETURNED_OK 3
+#define STAT_CNT_CYRUS_RETURNED_NOK 4
+#define STAT_CNT_CYRUS_RETURNED_TNOK 5
+
 
 struct cyrus_container_handle_s {
   cfgl_t *cfg;
+  statCounter_t *statCounter;
   int timeout;
   char *sender_address;
   char *lhlo_arg;
@@ -25,6 +66,7 @@ struct cyrus_container_handle_s {
 typedef struct cyrus_container_handle_s cyrus_container_handle_t;
 
 
+
 struct cyrus_work_handle_s {
   int id;
   cyrus_container_handle_t *cch;
@@ -36,31 +78,34 @@ typedef struct cyrus_work_handle_s cyrus_work_handle_t;
 
 int cyrus_init(cfgl_t *cfg, void **handle);
 int cyrus_destroy(void *handle);
-/* int cyrus_work_setup(void *handle, void **work_handle); */
-int cyrus_work(void *handle, void *work_handle, char *input, char *output);
-/* int cyrus_work_destroy(void *handle, void *work_handle); */
+/* int cyrus_work_setup(void *handle, void **work_handle);  */
+int cyrus_work(void *handle, void *work_handle, char *input, htbuffer_t *output);
+/* int cyrus_work_destroy(void *handle, void *work_handle);  */
 
 
 class_descriptor_t cyruscheck = {
   "cyruscheck",
   &cyrus_init,
   &cyrus_destroy,
-  NULL,   /* &verify_work_setup, */
+  NULL,  /* &cyrus_work_setup, */
   &cyrus_work,
-  NULL    /* &cyrus_work_destroy */
+  NULL   /* &cyrus_work_destroy */
 };
 
 
 int cyrus_init(cfgl_t *cfg, void **handle) {
   cyrus_container_handle_t *cch;
 
-  cch = (cyrus_container_handle_t*) malloc(sizeof(cyrus_container_handle_t));
+  cch = (cyrus_container_handle_t*) htmalloc(sizeof(cyrus_container_handle_t));
   cch->cfg = cfg;
 
   cch->timeout = atoi(findcfglx(cch->cfg, "timeout", "5"));
   cch->sender_address = findcfglx(cch->cfg, "sender_address", "<>");
   cch->lhlo_arg = findcfglx(cch->cfg, "lhlo_arg", "local");
   cch->lmtp_port = atoi(findcfglx(cch->cfg, "lmtp_port", "24"));
+
+  cyrus_setupCounterList();
+  cch->statCounter = initStatCounter("cyrus", cyrus_counterDefs);
 					    
   *handle = cch;
   return 0;
@@ -74,7 +119,9 @@ int cyrus_destroy(void *handle) {
 }
 
 
-int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
+
+
+int cyrus_work(void *handle, void *work_handle, char *input, htbuffer_t *output) {
   static const char *DEFAULT_ANSWER = "default answer";
   static const char *ILLEGAL_INPUT = "illegal input (must be 'depot_uid depot_host')";
   static const char *UNEXPECTED_ERROR = "unexpected error in lmtp dialog";
@@ -82,6 +129,8 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
   static const char *GO_AHEAD = "go ahead";
   static const char *DEPOT_DNS_ERROR = "depot could not be found in dns";
 
+  static int log_id = 0;
+
   cyrus_container_handle_t *cch = (cyrus_container_handle_t*) handle;
   int result = SMM_TEMP_NOK;
   char *depot_uid, *depot_host, *response_text, *tmp_arg;
@@ -95,12 +144,17 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
   } state = CONNECT;
 
 
+  log_id++;
 
-  syslog(LOG_DEBUG, "cyrus_work: going to check %s", input);
+  syslog(LOG_DEBUG, "cyrus_work: (%04x) going to check %s", log_id, input);
+
+  incStatCounter(cch->statCounter, STAT_CNT_CYRUS_WORKER);
 
   depot_uid = input;
   if (NULL == (depot_host = strchr(depot_uid, ' '))) {
-    snprintf(output, ANSWER_BUFSIZE, ILLEGAL_INPUT);
+    //    snprintf(output, ANSWER_BUFSIZE, ILLEGAL_INPUT);
+    htbuffer_strcpy(output, ILLEGAL_INPUT);
+    incStatCounter(cch->statCounter, STAT_CNT_CYRUS_ILLEGAL_INPUT);
     return SMM_PERM_NOK;
   }
   
@@ -110,9 +164,11 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
 
   a_rdata = get_a_rrs(depot_host);
   if (NULL == a_rdata) {
-    syslog(LOG_DEBUG, "cyrus_work: depot_host %s could not be found in dns",
-	   depot_host);
-    snprintf(output, ANSWER_BUFSIZE, DEPOT_DNS_ERROR);
+    syslog(LOG_DEBUG, "cyrus_work: (%04x) depot_host %s could not be found in dns",
+	   log_id, depot_host);
+    //    snprintf(output, ANSWER_BUFSIZE, DEPOT_DNS_ERROR);
+    htbuffer_strcpy(output, DEPOT_DNS_ERROR);
+    incStatCounter(cch->statCounter, STAT_CNT_CYRUS_DEPOT_DNS_FAILURE);
     return SMM_TEMP_NOK;
   }
 
@@ -120,13 +176,14 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
   free_rrs((void**)a_rdata);
   
 
-  syslog(LOG_DEBUG, "cyrus_work: depot_uid %s, depot_host %s", depot_uid, depot_host);
+  syslog(LOG_DEBUG, "cyrus_work: (%04x) depot_uid %s, depot_host %s", log_id,
+	 depot_uid, depot_host);
   
 
   lmtp = smtp_init(ip_address, cch->lmtp_port, cch->timeout);
   
   while ((END != state) && (0 == done)) {
-    syslog(LOG_DEBUG, "cyrus_work, lmtp dialog state %d", state);
+    syslog(LOG_DEBUG, "cyrus_work: (%04x) lmtp dialog state %d", log_id, state);
     switch(state) {
     case CONNECT:
       err = smtp_connect(lmtp);
@@ -138,7 +195,7 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
       err = smtp_mailfrom(lmtp, cch->sender_address);
       break;
     case RCPTTO:
-      tmp_arg = (char*) malloc(sizeof(char) * (strlen(depot_uid)+5));
+      tmp_arg = (char*) htmalloc(sizeof(char) * (strlen(depot_uid)+5));
       *tmp_arg = '\0';
       strcat(tmp_arg, "<");
       strcat(tmp_arg, depot_uid);
@@ -158,7 +215,7 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
 
     switch(err) {
     case SMTP_TIMEOUT:
-      syslog(LOG_DEBUG, "cyrus_work, timeout in lmtp dialog");
+      syslog(LOG_DEBUG, "cyrus_work: (%04x) timeout in lmtp dialog", log_id);
       result = SMM_LOCAL_TEMP_NOK;
       response_text = (char*)TIMEOUT_ERROR;
       done = 1;
@@ -167,13 +224,14 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
       /* evaluate smtp_response, return or continue */
       err = smtp_response(lmtp, &response_text);
       if (-1 == err) {
-	syslog(LOG_DEBUG, "cyrus_work, response could not be parsed");
+	syslog(LOG_DEBUG, "cyrus_work: (%04x) response could not be parsed", log_id);
 	result = SMM_LOCAL_TEMP_NOK;
 	response_text = (char*)UNEXPECTED_ERROR;
 	done = 1;
 	break;
       }
-      syslog(LOG_DEBUG, "cyrus_work, response: %d, %s", err, response_text);
+      syslog(LOG_DEBUG, "cyrus_work: (%04x) response: %d, %s", log_id, 
+	     err, response_text);
       switch(err/100) {
       case 4:
 	result = SMM_LOCAL_TEMP_NOK;
@@ -193,7 +251,7 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
       }
       break;
     default:
-      syslog(LOG_DEBUG, "cyrus_work, unexpected error in lmtp dialog");
+      syslog(LOG_DEBUG, "cyrus_work: (%04x) unexpected error in lmtp dialog", log_id);
       result = SMM_LOCAL_TEMP_NOK;
       response_text = (char*)UNEXPECTED_ERROR;
       done = 1;
@@ -206,24 +264,39 @@ int cyrus_work(void *handle, void *work_handle, char *input, char *output) {
 
   switch (result) {
   case SMM_LOCAL_TEMP_NOK:
-    snprintf(output, ANSWER_BUFSIZE, "<TNOK><%s>", response_text);
+    htbuffer_strcat(output, "<TNOK><");
+    htbuffer_strcat(output, response_text);
+    htbuffer_strcat(output, ">");
+    //snprintf(output, ANSWER_BUFSIZE, "<TNOK><%s>", response_text);
     result = SMM_OK;
+    incStatCounter(cch->statCounter, STAT_CNT_CYRUS_RETURNED_TNOK);
     break;
   case SMM_LOCAL_PERM_NOK:
-    snprintf(output, ANSWER_BUFSIZE, "<NOK><%s>", response_text);
+    htbuffer_strcat(output, "<NOK><");
+    htbuffer_strcat(output, response_text);
+    htbuffer_strcat(output, ">");
+    //snprintf(output, ANSWER_BUFSIZE, "<NOK><%s>", response_text);
     result = SMM_OK;
+    incStatCounter(cch->statCounter, STAT_CNT_CYRUS_RETURNED_NOK);
     break;
   case SMM_LOCAL_OK:
-    snprintf(output, ANSWER_BUFSIZE, "<OK><%s>", response_text);
+    htbuffer_strcat(output, "<OK><");
+    htbuffer_strcat(output, response_text);
+    htbuffer_strcat(output, ">");
+    //snprintf(output, ANSWER_BUFSIZE, "<OK><%s>", response_text);
     result = SMM_OK;
+    incStatCounter(cch->statCounter, STAT_CNT_CYRUS_RETURNED_OK);
     break;
   default:
-    snprintf(output, ANSWER_BUFSIZE, response_text);
+    htbuffer_strcpy(output, response_text);
+    //snprintf(output, ANSWER_BUFSIZE, response_text);
     break;
   }
 
   smtp_destroy(lmtp);
 
+  syslog(LOG_DEBUG, "cyrus_work: (%04x) result %d, %s", log_id,
+	 result, output->buf);
 
   return result;
 }

smmapdfw/depcomp

@@ -0,0 +1,423 @@
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+   dir=`echo "$object" | sed 's,/.*$,/,'`
+   if test "$dir" = "$object"; then
+      dir=
+   fi
+   # FIXME: should be _deps on DOS.
+   depfile="$dir.deps/$base"
+fi
+
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  This file always lives in the current directory.
+  # Also, the AIX compiler puts `$object:' at the start of each line;
+  # $object doesn't have directory information.
+  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  outname="$stripped.o"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      tmpdepfile1="$dir.libs/$base.lo.d"
+      tmpdepfile2="$dir.libs/$base.d"
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1="$dir$base.o.d"
+      tmpdepfile2="$dir$base.d"
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      exit $stat
+   fi
+
+   if test -f "$tmpdepfile1"; then
+      tmpdepfile="$tmpdepfile1"
+   else
+      tmpdepfile="$tmpdepfile2"
+   fi
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a space and a tab in the [].
+      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.  We will use -o /dev/null later,
+  # however we can't do the remplacement now because
+  # `-o $object' might simply not be used
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    -*)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the proprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0

smmapdfw/doc/Makefile.am

@@ -0,0 +1 @@
+info_TEXINFOS = smmapdfw.texi

smmapdfw/doc/Makefile.in

@@ -0,0 +1,478 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+INFO_DEPS = $(srcdir)/smmapdfw.info
+am__TEXINFO_TEX_DIR = $(srcdir)
+DVIS = smmapdfw.dvi
+PDFS = smmapdfw.pdf
+PSS = smmapdfw.ps
+HTMLS = smmapdfw.html
+TEXINFOS = smmapdfw.texi
+TEXI2DVI = texi2dvi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__installdirs = "$(DESTDIR)$(infodir)"
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BDB_LIBS = @BDB_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+info_TEXINFOS = smmapdfw.texi
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+
+.texi.info:
+	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	am__cwd=`pwd` && cd $(srcdir) && \
+	rm -rf $$backupdir && mkdir $$backupdir && \
+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+	  done; \
+	else :; fi && \
+	cd "$$am__cwd"; \
+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $@ $<; \
+	then \
+	  rc=0; \
+	  cd $(srcdir); \
+	else \
+	  rc=$$?; \
+	  cd $(srcdir) && \
+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+	fi; \
+	rm -rf $$backupdir; exit $$rc
+
+.texi.dvi:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) $<
+
+.texi.pdf:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2PDF) $<
+
+.texi.html:
+	rm -rf $(@:.html=.htp)
+	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $(@:.html=.htp) $<; \
+	then \
+	  rm -rf $@; \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+	else \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+	  exit 1; \
+	fi
+$(srcdir)/smmapdfw.info: smmapdfw.texi 
+smmapdfw.dvi: smmapdfw.texi 
+smmapdfw.pdf: smmapdfw.texi 
+smmapdfw.html: smmapdfw.texi 
+.dvi.ps:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) -o $@ $<
+
+uninstall-info-am:
+	@$(PRE_UNINSTALL)
+	@if (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+	  done; \
+	else :; fi
+	@$(NORMAL_UNINSTALL)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  (if cd "$(DESTDIR)$(infodir)"; then \
+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+	   else :; fi); \
+	done
+
+dist-info: $(INFO_DEPS)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for base in $$list; do \
+	  case $$base in \
+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
+	  for file in $$d/$$base*; do \
+	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	    test -f $(distdir)/$$relfile || \
+	      cp -p $$file $(distdir)/$$relfile; \
+	  done; \
+	done
+
+mostlyclean-aminfo:
+	-rm -rf smmapdfw.aux smmapdfw.cp smmapdfw.cps smmapdfw.fn smmapdfw.fns \
+	  smmapdfw.ky smmapdfw.kys smmapdfw.log smmapdfw.pg \
+	  smmapdfw.pgs smmapdfw.tmp smmapdfw.toc smmapdfw.tp \
+	  smmapdfw.tps smmapdfw.vr smmapdfw.vrs smmapdfw.dvi \
+	  smmapdfw.pdf smmapdfw.ps smmapdfw.html
+
+maintainer-clean-aminfo:
+	@list='$(INFO_DEPS)'; for i in $$list; do \
+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-info
+check-am: all-am
+check: check-am
+all-am: Makefile $(INFO_DEPS)
+installdirs:
+	for dir in "$(DESTDIR)$(infodir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+	    if test -f $$ifile; then \
+	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
+	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
+	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
+	    else : ; fi; \
+	  done; \
+	done
+	@$(POST_INSTALL)
+	@if (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+	  done; \
+	else : ; fi
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	dist-info distclean distclean-generic distclean-libtool \
+	distdir dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

smmapdfw/doc/smmapdfw.texi

@@ -13,6 +13,7 @@ Copyright @copyright{} 2004 Wolfgang Hottgenroth
 @titlepage
 @title smmapdfw
 @subtitle A framework for workers for the sendmail socketmap
+@subtitle --- featuring a sender-address verifier and a Cyrus mailbox checker ---
 @author Wolfgang Hottgenroth
 
 @page
@@ -32,6 +33,8 @@ Copyright @copyright{} 2004 Wolfgang Hottgenroth
 @menu
 * Motivation::                  
 * Overview::                    
+* Building smmapd from the sources::  
+* Command line options::        
 * Using from sendmail::         
 * Configuration::               
 * API::                         
@@ -39,29 +42,375 @@ Copyright @copyright{} 2004 Wolfgang Hottgenroth
 @detailmenu
  --- The Detailed Node Listing ---
 
+Overview
+
+* Sender-address verification plugin::  
+* Cyrus mailbox check plugin::  
+
+Using from sendmail
+
+* sender address verification::  
+* Cyrus IMAP server mailbox checks::  
+
 Configuration
 
 * Global::                      
 * Plugin::                      
 
+Plugin
+
+* Sender-address verifier::     
+* Cyrus mailbox checker::       
+
+API
+
+* Plugin interface::            
+* Obtaining configuration data::  
+* More or less useful stuff::   
+
+Plugin interface
+
+* name::                        
+* Container setup function::    
+* Container destroy function::  
+* Worker setup function::       
+* Worker destroy function::     
+* Worker function::             
+
+Obtaining configuration data
+
+* Without default value::       
+* With default value::          
+
+More or less useful stuff
+
+* count.h::                     
+* queue.h::                     
+* htdns.h::                     
+* htmalloc.h::                  
+* smtp.h::                      
+* safe_write.h::                
+
 @end detailmenu
 @end menu
 
 @node Motivation, Overview, Top, Top
 @chapter Motivation
-Why smmapdfw
+With release 8.13 sendmail introduces the socket map type. A map can
+be defined where a query is sent over an socket to an external daemon,
+doing some computations on the query to send back the result over the
+socket.
 
-@node Overview, Using from sendmail, Motivation, Top
+This opens another door to query data from external processes when
+performing mail routing. Thereby the already rich feature set of
+sendmail can be improved even more.
+
+This framework provides all required stuff like a threaded tcp-server,
+the netstring codec, map name dispatching, configuration file
+processing and more, so someone who likes to design and implement a
+particular socket map and concentrate completely on the particular
+task the socket map has to perform.
+
+The particular socket map processor appears as a shared object which
+is dynamically loaded by the daemon depending on the configuration.
+
+@node Overview, Building smmapd from the sources, Motivation, Top
 @chapter Overview
-Overview over smmapdfw
+smmapdfw consists of the actual server -- smmapd --, a library --
+libsmmapdfw -- providing the API and three plugins, one useless
+example and two more useful ones: a sender-address verifier and a
+Cyrus mailbox checker.
 
-@node Using from sendmail, Configuration, Overview, Top
+The server reads the configuration file, loads all configured plugins
+(socket map processors) and opens the configured tcp socket. It
+accepts requests on this tcp socket from sendmail in netstring
+encoding. For each connections it starts a thread. In this thread it
+dispatches the requests (the map name is part of the request) -- after
+decoding it from netstring and stripping the map name -- to the
+particular socket map processors. Afterwards it returns the result of
+the socket map processor -- after encoding it into netstring -- to
+sendmail.
+
+The library provides all functions and types defined by the API. For
+details go ahead to the API section.
+
+The socket map processors are implemented as plugins which are
+registered and loaded at run-time. They have to implement a worker
+function and may implement container and worker setup and destroy
+functions.
+
+For each plugin two handles may be created: the container handle can
+be created at server start up time and lasts the whole lifetime of the
+server, the worker handle is created when a request is dispatched to a
+plugin and lasts for all requests coming in during the
+connection.
+
+The container setup function, which a plugin can implement, is called
+at start up time, and returns the container handle.
+
+The worker setup function, which a plugin can implement, is called
+when the first request of a connection is dispatched to the plugin,
+and returns the worker handle.
+
+Both container and worker handle are provided to the worker function.
+
+The framework stores both container and worker handle as void pointer,
+so each plugin has to define its own handle data structure.
+
+
+@menu
+* Sender-address verification plugin::  
+* Cyrus mailbox check plugin::  
+@end menu
+
+@node Sender-address verification plugin, Cyrus mailbox check plugin, Overview, Overview
+@section Sender-address verification plugin
+This plugin performs verifications of sender-addresses.
+
+An m4 file -- @file{verifysender.m4} -- providing a sendmail feature is
+part of the smmapdfw distribution.
+
+To verify a sender-address, the plugin looks up the primary MX record
+of the domain of the sender-address and all IP addresses belonging to
+the found MX names.
+
+For each IP address it starts a checker thread. Each checker thread
+starts an smtp dialog to the mail-server listening on the IP. It stops
+the dialog after an failure or latest after the @code{rcpt} command.
+It uses a configurable address as sender and the address under test as
+recipient. It collects the result given after the @code{rcpt} and
+returns depending on the code OK, temporary or permanent failure.
+
+The first checker thread returning a permanent result (OK or permanent
+failure) wins and its result is stored in the cache (if enabled) and
+returned to sendmail.
+
+If no checker thread delivers a permanent result within the result
+timeout, a temporary failure is returned. However, no checker thread
+is aborted and the result of the first one is then just stored in the
+cache.
+
+
+@node Cyrus mailbox check plugin,  , Sender-address verification plugin, Overview
+@section Cyrus mailbox checker
+When sendmail performs final delivery via lmtp to a Cyrus IMAP server
+and the IMAP server returns a overquota failure, sendmail is in a
+somewhat unlucky position since it already has accepted the mail and
+nevertheless can not deliver it. It has to keep it in the queue. (So,
+the quota of a mailbox is unlimitly extended into sendmail's queue.)
+
+Unlucky enough, but usually after five days of repeated unsuccessful
+delivery attempt the message is returned to its sender.
+
+But it comes even more bad: the sender-address might be invalid, and
+now the message can not be returned.
+
+So, it would be good to reject the message directly in the smtp dialog
+if the recipients mailbox is overquota.
+
+Again, an m4 file -- @file{cyruscheck.m4} -- providing a sendmail
+feature is part of this distribution.
+
+It hooks into the local parse ruleset and checks through the map
+utilizing this plugin the Cyrus IMAP server to see whether the
+particular mailbox can store more mail.
+
+@node Building smmapd from the sources, Command line options, Overview, Top
+@chapter Building smmapd from the sources
+smmapd comes with a autoconf @file{configure} script.
+
+To get some help for the parameters it supports, say
+
+@verbatim
+./configure --help
+@end verbatim
+
+Important options are these:
+
+@verbatim
+  --enable-stats          Enables statistics collection. (default=no)
+  --with-bdb-lib-dir      Directory for Berkeley DB library files
+  --with-bdb-inc-dir      Directory for Berkeley include files
+  --with-djbdns-lib-dir   Directory for Bernstein's djbdns library files
+  --with-djbdns-inc-dir   Directory for Bernstein's djbdns include files
+  --with-netsnmp          With Net-SNMP
+  --with-netsnmp-lib-dir  Directory for Net-SNMP library files
+  --with-netsnmp-inc-dir  Directory for Net-SNMP include files
+  --with-netsnmp-bin-dir  Directory for Net-SNMP bin files, specifically
+                          net-snmp-config
+@end verbatim
+
+The Berkeley DB (tested with version 4.1.25) is required for the cache
+of the verifier plugin.
+
+DJB's resolver library (djbdns) is required on systems where the
+default resolver library is not thread-safe. (In my test-bed this was
+true for Solaris 8.)
+
+To gather statistic data, use @code{--enable-stats}, to be able to
+retrieve statistic data through snmp use @code{--with-netsnmp}. snmp
+requires @code{--enable-stats}. If there are no direct paths to the
+Net-SNMP stuff (tested with Net-SNMP 5.1.2), use
+@code{--with-netsnmp-lib-dir}, @code{--with-netsnmp-inc-dir} and
+@code{--with-netsnmp-bin-dir}. 
+
+
+@node Command line options, Using from sendmail, Building smmapd from the sources, Top
+@chapter Command line options
+
+@table @code
+@item -F
+Run smmapd in foreground instead of daemonizing. Overwrites the
+@code{do_fork} configuration option.
+
+@item -f <config-file>
+Use the given configuration file instead of the default one.
+
+@item -p <pid-file>
+Write the pid when daemonizing to the given pid file instead of the
+one mentioned in the configuration file.
+
+@item -v
+Display version information.
+
+@item -h
+Display usage information.
+@end table
+
+
+@node Using from sendmail, Configuration, Command line options, Top
 @chapter Using from sendmail
-How to use smmapdfw from sendmail
+
+To use a socket map in sendmail, it must be defined in the cf:
+
+@verbatim
+Kverifier socket -T<temp> inet:8884@127.0.0.1
+@end verbatim
+
+Then, the socket map can be used in rules as any other map too:
+
+@verbatim
+R< $+ >                 $: < $1 > < $(verifier $1 $:none $) >
+@end verbatim
+
+
+Many socket maps can use the same socket:
+
+@verbatim
+Kverifier socket -T<temp> inet:8884@127.0.0.1
+Kcyruscheck socket -T<temp> inet:8884@127.0.0.1
+Kdontknow socket -T<temp> inet:8884@127.0.0.1
+@end verbatim
+
+(Here, the dispatcher of smmapdfw jumps in.)
+
+@menu
+* sender address verification::  
+* Cyrus IMAP server mailbox checks::  
+@end menu
+
+@node sender address verification, Cyrus IMAP server mailbox checks, Using from sendmail, Using from sendmail
+@section sender address verification
+
+A sendmail feature file is delivered with smmapd to link the sender
+address verification into the ruleset @code{check_mail} hook
+@code{Local_check_mail}.
+
+It takes three parameters and can be used in the @code{sendmail.mc}
+like this:
+
+@verbatim
+FEATURE(`verifysender', `_mode_', `_return_', `_dummy_')
+@end verbatim
+
+@code{_mode_} must be replaced by either @code{black} or
+@code{white}. 
+
+For @code{black} a blacklist in
+@code{/etc/mail/verifier-black-list} is considered and only sender
+addresses in there mentioned domains are verified.
+
+The location of the blacklist can be configured using 
+
+@verbatim
+define(`confVERIFIER_BLACKLIST', `hash -o /prod/sendmail/etc/verifier-black-list')
+@end verbatim
+
+
+For @code{white} a whitelist in
+@code{/etc/mail/verifier-white-list} is considered and sender
+addresses in the whitelist or in domains mentioned in the whitelist
+are not verified.
+
+The location of the whitelist can be configured using 
+
+@verbatim
+define(`confVERIFIER_WHITELIST', `hash -o /prod/sendmail/etc/verifier-white-list')
+@end verbatim
+
+@code{confVERIFIER_BLACKLIST} and @code{confVERIFIER_WHITELIST} must
+appear in the @code{sendmail.mc} before the feature is called.
+
+@code{_return_} must be replaced by either @code{temp} or
+@code{perm}. 
+
+If the sender address verification ends up in a permanent negative
+response from the home-server of the address, for @code{temp} a
+temporary failure (4xx), for @code{perm} a permanent
+failure (5xx) is returned.
+
+@code{_dummy_} must be replaced by either @code{active} or
+@code{dummy}. If @code{dummy} is set here, the verifier is called but
+its result is just logged and not further considered for the routing.
+
+The connection to the smmapd is configured using
+@code{define(`confVERIFIER_MAP')}.
+The default is 
+
+@verbatim
+define(`confVERIFIER_MAP', `inet:8884@127.0.0.1')
+@end verbatim
+
+@node Cyrus IMAP server mailbox checks,  , sender address verification, Using from sendmail
+@section Cyrus IMAP server mailbox checks
+
+
+A sendmail feature file @code{cyruscheck.m4} is delivered with
+smmapd. It provides a ruleset @code{cyruscheck}, which can by used in
+ruleset @code{ParseLocal}.
+
+It can be used in the @code{sendmail.mc} like this:
+
+@verbatim
+FEATURE(`cyruscheck', `_dummy_')
+@end verbatim
+
+@code{_dummy_} must be replaced by either @code{active} or
+@code{dummy}. If @code{dummy} is set here, the verifier is called but
+its result is just logged and not further considered for the routing.
+
+However, remember that only the ruleset @code{cyruscheck} is
+provided. You need to call it in your @code{LocalParse} ruleset on
+your own.
+
+The ruleset takes two parameters: The mailbox name on the Cyrus IMAP
+server and the hostname of the Cyrus IMAP server, both in angle brackets.
+
+The connection to the smmapd is configured using
+@code{define(`confCYRUSCHECK_MAP')}.
+The default is 
+
+@verbatim
+define(`confCYRUSCHECK_MAP', `inet:8884@127.0.0.1')
+@end verbatim
+
+
 
 @node Configuration, API, Using from sendmail, Top
 @chapter Configuration
-How to configure smmapdfw
+The configuration file of smmapdfw has one global section, for the
+server itself and one section for each plugin.
+
 
 @menu
 * Global::                      
@@ -70,11 +419,202 @@ How to configure smmapdfw
 
 @node Global, Plugin, Configuration, Configuration
 @section Global
-Global configuration items
+
+@verbatim
+[global]
+do_fork = 0
+pid_file = smmapd.pid
+address = 127.0.0.1
+port = 8887
+; plugin_dir = /home/who/Sources/sf/smmapdfw
+; plugins = test_worker1 test_worker2 verifier cyruscheck lua_worker
+plugins = verifier
+enable_stats = 1
+enable_snmp = 1
+
+
+
+@end verbatim
+
+@table @samp
+@item do_fork
+Should the server fork into background. 0 or 1. May be overwritten by
+@code{-F} commandline switch.
+
+@item pid_file
+Path and filename of the pidfile. May be overwritten by @code{-p}
+commandline switch.
+
+@item address
+Address to bind socket on. Leave it out to bind on @code{IN_ANYADDR}.
+
+@item port
+Port to bind socket on.
+
+@item plugin_dir
+Directory where plugins can be found. Usually this parameter is not
+required, when plugins are installed in the lib path configured when
+building smmapdfw. Only one path can be given.
+
+@item plugins
+Lists all plugins separated by spaces which should be loaded. The plugin name refers to
+the section name of the particular configuration section.
+
+@item enable_stats
+This enables the statistics output thread. It is only available when
+smmapd was built with @code{--enable-stats}. Further configuration in
+section @code{stats} is required.
+
+@item enable_snmp
+This enables the snmp AgentX subagent to retrieve statistic data. It
+is only available when smmapd was built with @code{--enable-stats} and
+@code{--with-netsnmp}. Further configuration in section @code{snmp} is required.
+@end table
+
+
+
+@section stats
+
+@verbatim
+[stats]
+stdout_nice = 2
+syslog_nice =1
+period = 1
+@end verbatim
+
+The statistics output thread can write to stdout and/or syslog in two
+different format, one more human-readable, the other one more
+machine-readable.
+
+The number after @code{stdout_nice} and @code{syslog_nice} specifies
+the format. 0 means no output on this channel, 1 means
+machine-readable output and 2 means human-readable output.
+
+@code{period} specifies the time in seconds behind to statistic
+outputs.
+
+@section snmp
+
+@verbatim
+[snmp]
+agentx_socket = /var/agentx/master
+@end verbatim
+
+The socket on which the snmpd is listening for AgentX subagents is
+specified here.
+
 
 @node Plugin,  , Global, Configuration
 @section Plugin
-General plugin configuration items
+The section name of a plugin configuration section must be used in the
+@code{plugins} parameter of the @code{global} section.
+
+Each plugin section must have at least the name of the shared object
+file from which the plugin should be loaded in the parameter @code{obj}.
+
+All other parameters a completely under the control of the plugin
+designer/implementor.
+
+@menu
+* Sender-address verifier::     
+* Cyrus mailbox checker::       
+@end menu
+
+@node Sender-address verifier, Cyrus mailbox checker, Plugin, Plugin
+@subsection Sender-address verifier
+
+@verbatim
+[verifier]
+obj = libverify_worker.so
+timeout_result = 5
+timeout_dialog = 20
+cache_enabled = 1
+cache_expiry = 86400
+cache_file = /var/lib/smmapdfw/verifier.cache
+sender_address = <>
+ehlo_arg = local
+smtp_port = 25
+max_checker_threads = 100
+
+@end verbatim
+
+
+@table @samp
+@item obj
+The plugin should be loaded from the file @code{libverify_worker.so}.
+
+@item timeout_result
+The plugin will return a result latest after this timeout. If there is
+no result at this time, a temporary failure will be returned. However,
+running verifications will not be aborted, so their results can go
+into the cache.
+
+@item timeout_dialog
+Timeout for the smtp dialog to home servers of sender-addresses.
+
+@item cache_enable
+Cache permenant results of verifications.
+
+@item cache_expiry
+Expiry time of entries in the cache.
+
+@item cache_file
+Path and filename of the cache.
+
+@item sender_address
+This address will be used as sender-address in the verification
+dialog. Use some special to avoid verification loops. The address must
+be given in exactly that notation it should be used in the dialog.
+
+@item ehlo_arg
+Argument to the @code{ehlo} command in the verification dialog. Note
+that certain MTA's require a full qualified domain name.
+
+@item smtp_port
+Port to be used for smtp verification dialog.
+
+@item max_checker_threads
+The verifier plugin looks up the primary MX for a sender-address and
+resolves all IP addresses for the found MX records. For each IP
+address it starts one checker thread. (The first one returning a
+permenant result wins.) This parameter limits the number of checker
+threads.
+@end table
+
+@node  Cyrus mailbox checker,  , Sender-address verifier, Plugin
+@subsection Cyrus mailbox checker
+
+@verbatim
+[cyruscheck]
+obj = libcyrus_worker.so
+timeout = 10
+sender_address = <testsender>
+lhlo_arg = local
+lmtp_port = 24
+
+@end verbatim
+
+
+@table @samp
+@item obj
+The cyrus mailbox checker should be loaded from the file
+@code{libcyrus_worker.so}.
+
+@item timeout
+Timeout for the lmtp dialog.
+
+@item sender_address
+Address to be used as sender in the lmtp dialog.
+
+@item lhlo_arg
+Argument for @code{lhlo} in the lmtp dialog.
+
+@item lmtp_port
+Port to be used for the lmtp dialog.
+@end table
+
+
+
 
 
 
@@ -82,5 +622,315 @@ General plugin configuration items
 @chapter API
 API documentation for plugin programmers
 
+@menu
+* Plugin interface::            
+* Obtaining configuration data::  
+* More or less useful stuff::   
+@end menu
+
+@node Plugin interface, Obtaining configuration data, API, API
+@section Plugin interface
+
+Each plugin has to defined a class descriptor of the type
+@code{class_descriptor_t}.
+
+@verbatim
+struct class_descriptor_s {
+  char *name;
+  int (*init_function)(cfgl_t *cfg, void **handle);
+  int (*destroy_function)(void *handle);
+  int (*work_setup_function)(void *handle, void **work_handle);
+  int (*work_function)(void *handle, void *work_handle, char *input, 
+                       char *output);
+  int (*work_destroy_function)(void *handle, void *work_handle);
+};
+
+typedef struct class_descriptor_s class_descriptor_t;
+
+@end verbatim
+
+The variable name of the class descriptor must be the same as the
+configuration section name from the configuration file. As an example:
+here is the descriptor of the verifier plugin:
+
+@verbatim
+class_descriptor_t verifier = {
+  "verifier",
+  &verify_init,
+  &verify_destroy,
+  &verify_work_setup,
+  &verify_work,
+  &verify_work_destroy
+};
+
+@end verbatim
+
+@menu
+* name::                        
+* Container setup function::    
+* Container destroy function::  
+* Worker setup function::       
+* Worker destroy function::     
+* Worker function::             
+@end menu
+
+@node name, Container setup function, Plugin interface, Plugin interface
+@subsection @code{name}
+
+This is the name of the plugin. It must match to the name of the
+plugin descriptor and the name of the plugin's configuration section.
+
+@node Container setup function, Container destroy function, name, Plugin interface
+@subsection Container setup function: @code{init_function}
+
+@code{int (*init_function)(cfgl_t *cfg, void **handle);}
+
+The Container setup function is called at start up time. A handle to
+access the configuration is handed over and the container handle is
+expected back.
+
+Each plugin defines its own structure for the container
+handle. Certainly it will store the configuration handle within.
+
+
+@node Container destroy function, Worker setup function, Container setup function, Plugin interface
+@subsection Container destroy function: @code{destroy_function}
+
+@code{int (*destroy_function)(void *handle);}
+
+The Container destroy function is called when the plugin is
+unloaded. Is happens currently never.
+
+However, free any resources allocated for the container within this
+function.
+
+
+@node Worker setup function, Worker destroy function, Container destroy function, Plugin interface
+@subsection Worker setup function: @code{work_setup_function}
+
+@code{int (*work_setup_function)(void *handle, void **work_handle);}
+
+The worker setup function is called when the first request of one
+connection is dispatched to the plugin. The container handle is
+provided, the worker handle is expected back.
+
+Each plugin defines its own structure for the worker handle.
+
+
+@node Worker destroy function, Worker function, Worker setup function, Plugin interface
+@subsection Worker destroy function: @code{work_destroy_function}
+
+@code{int (*work_destroy_function)(void *handle, void *work_handle);}
+
+The worker destroy function is called when the connection associated
+with the worker is closed.
+
+Free any resources allocated for this worker. Do not free resources
+associated with the container.
+
+@node Worker function,  , Worker destroy function, Plugin interface
+@subsection Worker function: @code{work_function}
+
+@code{int (*work_function)(void *handle, void *work_handle, char *input, char *output);}
+
+The worker function is called for each request dispatched to this
+plugin. The container handle, the worker handle and of course the
+input is provided.
+
+The return value must be one of
+
+@verbatim
+#define SMM_OK 1
+#define SMM_TEMP_NOK 2
+#define SMM_PERM_NOK 3
+#define SMM_NOT_FOUND_NOK 4
+
+@end verbatim
+
+which matches to the codes sendmail expects in the response from a
+socket map.
+
+@code{output} is the text returned with the code to
+sendmail. Especially for @code{SMM_OK} this is the return value of the
+map.
+
+
+@node Obtaining configuration data, More or less useful stuff, Plugin interface, API
+@section Obtaining configuration data
+
+Each plugin can easily obtain data from its own configuration section.
+
+
+@menu
+* Without default value::       
+* With default value::          
+@end menu
+
+@node Without default value, With default value, Obtaining configuration data, Obtaining configuration data
+@subsection Without default value
+
+@code{char *findcfgl(config_item_t *cfg, char *name);}
+
+@table @samp
+@item cfg
+Configuration handle, handed over to the plugin through the container
+setup function.
+
+@item name
+Name of the configuration parameter.
+@end table
+
+The value of the request configuration parameter is returned. If it
+does not exist, @code{NULL} is returned.
+
+@node  With default value,  , Without default value, Obtaining configuration data
+@subsection With default value
+
+@code{char *findcfglx(config_item_t *cfg, char *name, char *default_value);}
+
+@table @samp
+@item cfg
+Configuration handle, handed over to the plugin through the container
+setup function.
+
+@item name
+Name of the configuration parameter.
+
+@item default_value
+Default value to be returned instead of @code{NULL} if the parameter
+is not mentioned in the configuration file.
+@end table
+
+
+
+@node More or less useful stuff,  , Obtaining configuration data, API
+@section More or less useful stuff
+
+The functions of the library are discussed here for each of the header files.
+
+@menu
+* count.h::                     
+* queue.h::                     
+* htdns.h::                     
+* htmalloc.h::                  
+* smtp.h::                      
+* safe_write.h::                
+@end menu
+
+@node count.h, queue.h, More or less useful stuff, More or less useful stuff
+@subsection @code{count.h}
+
+This is a threadsafe counter, wrapped around an @code{int}.
+
+Define or allocate a handle of type @code{count_t} to use it.
+
+It defines the following functions of hopefully obvious meaning:
+
+@verbatim
+void count_init(count_t *c);
+void count_destroy(count_t *c);
+int count_inc(count_t *c);
+int count_dec(count_t *c);
+int count_get(count_t *c);
+@end verbatim
+
+
+@node queue.h, htdns.h, count.h, More or less useful stuff
+@subsection @code{queue.h}
+
+This is a threadsafe queue. Pointers to anything (@code{void}) can be
+stored in it.
+
+Define or allocate a handle of type @code{ht_queue_t} to use it.
+
+It defines the following functions of hopefully obvious meaning:
+
+@verbatim
+void queue_init(ht_queue_t *q);
+void queue_destroy(ht_queue_t *q);
+int queue_put(ht_queue_t *q, void *d);
+void *queue_get_wait(ht_queue_t *q);
+@end verbatim
+
+
+@node htdns.h, htmalloc.h, queue.h, More or less useful stuff
+@subsection @code{htdns.h}
+
+This is a wrapper around the resolver library selected at build time
+(currently traditional @code{libresolv} or djbdns).
+
+It defines the following functions:
+
+@verbatim
+void free_rrs(void **resp);
+mx_rdata_t** get_mx_rrs(char *domain);
+mx_rdata_t** get_best_mx_rrs(char *domain);
+a_rdata_t** get_a_rrs(char *domain);
+cname_rdata_t** get_cname_rrs(char *domain);
+@end verbatim
+
+For details on the data types look into the header file.
+
+Don't forget to free anything you got using @code{free_rrs}.
+
+@node htmalloc.h, smtp.h, htdns.h, More or less useful stuff
+@subsection @code{htmalloc.h}
+
+This provides variants of @code{malloc}, @code{realloc} and
+@code{strdup} which either returns or in case of out-of-memory sends
+the whole process into nirwana.
+
+@verbatim
+void *htmalloc(size_t size);
+void *htrealloc(void *ptr, size_t size);
+char *htstrdup(const char *s);
+@end verbatim
+
+
+@node smtp.h, safe_write.h, htmalloc.h, More or less useful stuff
+@subsection @code{smtp.h}
+
+This is a simple smtp library, also useable for lmtp.
+
+Define or allocate a handle of type @code{smtp_t} to use it.
+
+@verbatim
+smtp_t *smtp_init2(char *host_address, int port, int timeout);
+smtp_t *smtp_init(unsigned int address, int port, int timeout);
+void smtp_destroy(smtp_t *handle);
+
+int smtp_response(smtp_t *handle, char **response);
+int smtp_command(smtp_t *handle, char *command, char *arg);
+
+int smtp_connect(smtp_t *handle);
+int smtp_close(smtp_t *handle);
+
+int smtp_helo(smtp_t *handle, char *arg);
+int smtp_ehlo(smtp_t *handle, char *arg);
+int smtp_lhlo(smtp_t *handle, char *arg);
+int smtp_mailfrom(smtp_t *handle, char *arg);
+int smtp_rcptto(smtp_t *handle, char *arg);
+int smtp_data(smtp_t *handle);
+int smtp_datasend(smtp_t *handle, char *data);
+int smtp_dataend(smtp_t *handle);
+int smtp_rset(smtp_t *handle);
+int smtp_quit(smtp_t *handle);
+@end verbatim
+
+Note: @code{host_address} in @code{smtp_init2} is a quad-dotted IP
+address, no hostname.
+
+@node safe_write.h,  , smtp.h, More or less useful stuff
+@subsection @code{safe_write.h}
+
+@verbatim
+ssize_t safe_write(int fd, const void *buf, size_t count);
+@end verbatim
+
+This is a @code{SIGPIPE} death avoiding write function. However, no
+input should be expected when trying to write with this function,
+since at least one input character is eaten up.
+
+
 
 @bye

smmapdfw/libsmmapdfw/Makefile.am

@@ -1,5 +1,11 @@
-include_HEADERS=containers_public.h queue.h smtp.h cfg.h count.h safe_write.h sunos_comp.h dns.h smmapd.h
+include_HEADERS=containers_public.h queue.h smtp.h cfg.h count.h safe_write.h sunos_comp.h htdns.h smmapd.h htmalloc.h stats.h htcache.h htbuffer.h dvl.h
 lib_LTLIBRARIES = libsmmapdfw.la
-libsmmapdfw_la_SOURCES = cfg.c queue.c count.c safe_write.c config_public.c dns.c smtp.c
-
-
+libsmmapdfw_la_SOURCES = cfg.c queue.c count.c safe_write.c config_public.c htdns.c smtp.c htmalloc.c stats.c htcache.c htbuffer.c
+libsmmapdfw_la_LIBADD = @BDB_LIBS@
+bin_PROGRAMS = htcachetest htbuffertest htdnstest
+htcachetest_SOURCES = htcachetest.c
+htcachetest_LDADD = libsmmapdfw.la
+htbuffertest_SOURCES = htbuffertest.c
+htbuffertest_LDADD = libsmmapdfw.la
+htdnstest_SOURCES = htdnstest.c
+htdnstest_LDADD = libsmmapdfw.la

smmapdfw/libsmmapdfw/Makefile.in

@@ -1,6 +1,8 @@
-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
 
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,182 +12,347 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
+
 
-SHELL = @SHELL@
 
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = ..
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-host_alias = @host_alias@
+build_triplet = @build@
 host_triplet = @host@
+bin_PROGRAMS = htcachetest$(EXEEXT) htbuffertest$(EXEEXT) \
+	htdnstest$(EXEEXT)
+subdir = libsmmapdfw
+DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(includedir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libsmmapdfw_la_DEPENDENCIES =
+am_libsmmapdfw_la_OBJECTS = cfg.lo queue.lo count.lo safe_write.lo \
+	config_public.lo htdns.lo smtp.lo htmalloc.lo stats.lo \
+	htcache.lo htbuffer.lo
+libsmmapdfw_la_OBJECTS = $(am_libsmmapdfw_la_OBJECTS)
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(bin_PROGRAMS)
+am_htbuffertest_OBJECTS = htbuffertest.$(OBJEXT)
+htbuffertest_OBJECTS = $(am_htbuffertest_OBJECTS)
+htbuffertest_DEPENDENCIES = libsmmapdfw.la
+am_htcachetest_OBJECTS = htcachetest.$(OBJEXT)
+htcachetest_OBJECTS = $(am_htcachetest_OBJECTS)
+htcachetest_DEPENDENCIES = libsmmapdfw.la
+am_htdnstest_OBJECTS = htdnstest.$(OBJEXT)
+htdnstest_OBJECTS = $(am_htdnstest_OBJECTS)
+htdnstest_DEPENDENCIES = libsmmapdfw.la
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libsmmapdfw_la_SOURCES) $(htbuffertest_SOURCES) \
+	$(htcachetest_SOURCES) $(htdnstest_SOURCES)
+DIST_SOURCES = $(libsmmapdfw_la_SOURCES) $(htbuffertest_SOURCES) \
+	$(htcachetest_SOURCES) $(htdnstest_SOURCES)
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
 AR = @AR@
-AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
 BDB_LIBS = @BDB_LIBS@
 CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
 CXX = @CXX@
 CXXCPP = @CXXCPP@
-DLLTOOL = @DLLTOOL@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
 ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 F77 = @F77@
-GCJ = @GCJ@
-GCJFLAGS = @GCJFLAGS@
-HAVE_LIB = @HAVE_LIB@
-LIB = @LIB@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
-LTLIB = @LTLIB@
+LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
-OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
-RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
-
-include_HEADERS = containers_public.h queue.h smtp.h cfg.h count.h safe_write.h sunos_comp.h dns.h smmapd.h
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+include_HEADERS = containers_public.h queue.h smtp.h cfg.h count.h safe_write.h sunos_comp.h htdns.h smmapd.h htmalloc.h stats.h htcache.h htbuffer.h dvl.h
 lib_LTLIBRARIES = libsmmapdfw.la
-libsmmapdfw_la_SOURCES = cfg.c queue.c count.c safe_write.c config_public.c dns.c smtp.c
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES = 
-LTLIBRARIES =  $(lib_LTLIBRARIES)
+libsmmapdfw_la_SOURCES = cfg.c queue.c count.c safe_write.c config_public.c htdns.c smtp.c htmalloc.c stats.c htcache.c htbuffer.c
+libsmmapdfw_la_LIBADD = @BDB_LIBS@
+htcachetest_SOURCES = htcachetest.c
+htcachetest_LDADD = libsmmapdfw.la
+htbuffertest_SOURCES = htbuffertest.c
+htbuffertest_LDADD = libsmmapdfw.la
+htdnstest_SOURCES = htdnstest.c
+htdnstest_LDADD = libsmmapdfw.la
+all: all-am
 
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I..
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-libsmmapdfw_la_LDFLAGS = 
-libsmmapdfw_la_LIBADD = 
-libsmmapdfw_la_OBJECTS =  cfg.lo queue.lo count.lo safe_write.lo \
-config_public.lo dns.lo smtp.lo
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-HEADERS =  $(include_HEADERS)
-
-DIST_COMMON =  Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-DEP_FILES =  .deps/cfg.P .deps/config_public.P .deps/count.P .deps/dns.P \
-.deps/queue.P .deps/safe_write.P .deps/smtp.P
-SOURCES = $(libsmmapdfw_la_SOURCES)
-OBJECTS = $(libsmmapdfw_la_OBJECTS)
-
-all: all-redirect
 .SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --gnu libsmmapdfw/Makefile
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  libsmmapdfw/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  libsmmapdfw/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-libLTLIBRARIES:
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-
-distclean-libLTLIBRARIES:
-
-maintainer-clean-libLTLIBRARIES:
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(libdir)
+	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
+	    f=$(am__strip_dir) \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  p=$(am__strip_dir) \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
-.c.obj:
-	$(COMPILE) -c `cygpath -w $<`
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libsmmapdfw.la: $(libsmmapdfw_la_OBJECTS) $(libsmmapdfw_la_DEPENDENCIES) 
+	$(LINK) -rpath $(libdir) $(libsmmapdfw_la_LDFLAGS) $(libsmmapdfw_la_OBJECTS) $(libsmmapdfw_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	     || test -f $$p1 \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+	  else :; fi; \
+	done
 
-.s.o:
-	$(COMPILE) -c $<
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+	done
 
-.S.o:
-	$(COMPILE) -c $<
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+htbuffertest$(EXEEXT): $(htbuffertest_OBJECTS) $(htbuffertest_DEPENDENCIES) 
+	@rm -f htbuffertest$(EXEEXT)
+	$(LINK) $(htbuffertest_LDFLAGS) $(htbuffertest_OBJECTS) $(htbuffertest_LDADD) $(LIBS)
+htcachetest$(EXEEXT): $(htcachetest_OBJECTS) $(htcachetest_DEPENDENCIES) 
+	@rm -f htcachetest$(EXEEXT)
+	$(LINK) $(htcachetest_LDFLAGS) $(htcachetest_OBJECTS) $(htcachetest_LDADD) $(LIBS)
+htdnstest$(EXEEXT): $(htdnstest_OBJECTS) $(htdnstest_DEPENDENCIES) 
+	@rm -f htdnstest$(EXEEXT)
+	$(LINK) $(htdnstest_LDFLAGS) $(htdnstest_OBJECTS) $(htdnstest_LDADD) $(LIBS)
 
 mostlyclean-compile:
-	-rm -f *.o core *.core
 	-rm -f *.$(OBJEXT)
 
-clean-compile:
-
 distclean-compile:
 	-rm -f *.tab.c
 
-maintainer-clean-compile:
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfg.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/config_public.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/count.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htbuffer.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htbuffertest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htcache.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htcachetest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htdns.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htdnstest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/htmalloc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/queue.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/safe_write.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smtp.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stats.Plo@am__quote@
 
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+.c.o:
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+.c.obj:
+@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -194,186 +361,200 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 distclean-libtool:
-
-maintainer-clean-libtool:
-
-libsmmapdfw.la: $(libsmmapdfw_la_OBJECTS) $(libsmmapdfw_la_DEPENDENCIES)
-	$(LINK) -rpath $(libdir) $(libsmmapdfw_la_LDFLAGS) $(libsmmapdfw_la_OBJECTS) $(libsmmapdfw_la_LIBADD) $(LIBS)
-
+	-rm -f libtool
+uninstall-info-am:
 install-includeHEADERS: $(include_HEADERS)
 	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
 	@list='$(include_HEADERS)'; for p in $$list; do \
-	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
-	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p"; \
-	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p; \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
+	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
 	done
 
 uninstall-includeHEADERS:
 	@$(NORMAL_UNINSTALL)
-	list='$(include_HEADERS)'; for p in $$list; do \
-	  rm -f $(DESTDIR)$(includedir)/$$p; \
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
 	done
 
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags  $$unique $(LISP))
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
 
-mostlyclean-tags:
-
-clean-tags:
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = libsmmapdfw
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	here=`cd $(top_builddir) && pwd`; \
-	top_distdir=`cd $(top_distdir) && pwd`; \
-	distdir=`cd $(distdir) && pwd`; \
-	cd $(top_srcdir) \
-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu libsmmapdfw/Makefile
-	@for file in $(DISTFILES); do \
-	  d=$(srcdir); \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
 	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 	  else \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
 	  fi; \
 	done
-
-DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-
--include $(DEP_FILES)
-
-mostlyclean-depend:
-
-clean-depend:
-
-distclean-depend:
-	-rm -rf .deps
-
-maintainer-clean-depend:
-
-%.o: %.c
-	@echo '$(COMPILE) -c $<'; \
-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm .deps/$(*F).pp
-
-%.lo: %.c
-	@echo '$(LTCOMPILE) -c $<'; \
-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
-	  < .deps/$(*F).pp > .deps/$(*F).P; \
-	tr ' ' '\012' < .deps/$(*F).pp \
-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
-	    >> .deps/$(*F).P; \
-	rm -f .deps/$(*F).pp
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
 check-am: all-am
 check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am: install-libLTLIBRARIES
-install-exec: install-exec-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
 
-install-data-am: install-includeHEADERS
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
 install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-libLTLIBRARIES uninstall-includeHEADERS
-uninstall: uninstall-am
-all-am: Makefile $(LTLIBRARIES) $(HEADERS)
-all-redirect: all-am
+
+installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-	$(mkinstalldirs)  $(DESTDIR)$(libdir) $(DESTDIR)$(includedir)
-
-
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
-mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
-		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
-		mostlyclean-generic
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-am
 
-clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
-		clean-depend clean-generic mostlyclean-am
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
 
-clean: clean-am
+pdf: pdf-am
 
-distclean-am:  distclean-libLTLIBRARIES distclean-compile \
-		distclean-libtool distclean-tags distclean-depend \
-		distclean-generic clean-am
-	-rm -f libtool
+pdf-am:
 
-distclean: distclean-am
+ps: ps-am
 
-maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-tags maintainer-clean-depend \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+ps-am:
 
-maintainer-clean: maintainer-clean-am
-
-.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
-distclean-compile clean-compile maintainer-clean-compile \
-mostlyclean-libtool distclean-libtool clean-libtool \
-maintainer-clean-libtool uninstall-includeHEADERS \
-install-includeHEADERS tags mostlyclean-tags distclean-tags clean-tags \
-maintainer-clean-tags distdir mostlyclean-depend distclean-depend \
-clean-depend maintainer-clean-depend info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-info-am uninstall-libLTLIBRARIES
 
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic clean-libLTLIBRARIES clean-libtool ctags \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-exec install-exec-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-includeHEADERS uninstall-info-am \
+	uninstall-libLTLIBRARIES
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

smmapdfw/libsmmapdfw/cfg.c

@@ -1,3 +1,25 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
 #if HAVE_CONFIG_H
 # include "config.h"
 #endif
@@ -14,7 +36,10 @@
 #include <syslog.h>
 #endif
 
+#include <string.h>
+
 #include "cfg.h"
+#include "htmalloc.h"
 
 #include "sunos_comp.h"
 
@@ -81,9 +106,9 @@ config_section_t *readcfg(char *cfgfile) {
 	state = STATE_START;
 	i = 0;
 
-	cs = (config_section_t*) malloc(sizeof(config_section_t));
+	cs = (config_section_t*) htmalloc(sizeof(config_section_t));
 	cs->next = NULL;
-	cs->name = (char*) malloc(strlen(buffer)+1);
+	cs->name = (char*) htmalloc(strlen(buffer)+1);
 	strcpy(cs->name, buffer);
 	cs->item = NULL;
 
@@ -113,9 +138,9 @@ config_section_t *readcfg(char *cfgfile) {
 	state = STATE_EQUAL;
 	i = 0;
 
-	ci = (config_item_t*) malloc(sizeof(config_item_t));
+	ci = (config_item_t*) htmalloc(sizeof(config_item_t));
 	ci->next = NULL;
-	ci->name = (char*) malloc(strlen(buffer)+1);
+	ci->name = (char*) htmalloc(strlen(buffer)+1);
 	strcpy(ci->name, buffer);
 	ci->value = NULL;
 
@@ -172,7 +197,7 @@ config_section_t *readcfg(char *cfgfile) {
 	state = STATE_START;
 	i = 0;
 
-	ci->value = (char*) malloc(strlen(buffer)+1);
+	ci->value = (char*) htmalloc(strlen(buffer)+1);
 	strcpy(ci->value, buffer);
 
 	break;

smmapdfw/libsmmapdfw/cfg.h

@@ -1,3 +1,24 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
 #ifndef _CONFIG_H_
 #define _CONFIG_H_
 

smmapdfw/libsmmapdfw/config_public.c

@@ -1,3 +1,24 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
 #if HAVE_CONFIG_H
 # include "config.h"
 #endif

smmapdfw/libsmmapdfw/containers_public.h

@@ -1,14 +1,36 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
 #ifndef _CONTAINERS_PUBLIC_H_
 #define _CONTAINERS_PUBLIC_H_
 
 #include "cfg.h"
+#include "htbuffer.h"
 
 struct class_descriptor_s {
   char *name;
   int (*init_function)(cfgl_t *cfg, void **handle);
   int (*destroy_function)(void *handle);
   int (*work_setup_function)(void *handle, void **work_handle);
-  int (*work_function)(void *handle, void *work_handle, char *input, char *output);
+  int (*work_function)(void *handle, void *work_handle, char *input, htbuffer_t *output);
   int (*work_destroy_function)(void *handle, void *work_handle);
 };
 

smmapdfw/libsmmapdfw/count.c

@@ -1,3 +1,25 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
 #include "count.h"
 
 void count_init(count_t *c) {

smmapdfw/libsmmapdfw/count.h

@@ -1,3 +1,25 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
 #ifndef _COUNT_H_
 #define _COUNT_H_
 

smmapdfw/libsmmapdfw/dns.c

@@ -1,309 +0,0 @@
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <arpa/nameser.h>
-#include <resolv.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <stdio.h>
-#include <strings.h>
-#include <errno.h>
-#include <assert.h>
-
-#include "dns.h"
-
-extern int h_errno;
-/* extern struct state _res; */
-
-union answer_u {
-  HEADER hdr;
-  u_char buf[PACKETSZ+1];
-};
-
-typedef union answer_u answer_t;
-
-
-
-#define get32_x(b, o) htonl((b[o+3] << 24) + (b[o+2] << 16) + (b[o+1] << 8) + b[o])
-#define get32(b, o) ((b[o] << 24) + (b[o+1] << 16) + (b[o+2] << 8) + b[o+3])
-#define get16(b, o) ((b[o] << 8) + b[o+1])
-
-
-
-static int get_domain_name(answer_t *answer, int offset, char **name) {
-  int start, len, i, offset2;
-  char *name_buf, *name_buf2;
-  name_buf = NULL;
-
-
-  while (0 != (len = answer->buf[offset++])) {
-    if (0xC0 == (len & 0xC0)) {
-      if (NULL != name) { /* if we don't need the result, we don't need to recurse, since a ... */
-	offset2 = ((len & ~0xC0) << 8) + answer->buf[offset++];
-	get_domain_name(answer, offset2, &name_buf2);
-	name_buf = (char*) realloc(name_buf, ((NULL != name_buf) ? strlen(name_buf) : 0) + strlen(name_buf2) + 1);
-	strcat(name_buf, name_buf2);
-	free(name_buf2);
-	*name = name_buf;
-      } else {
-	offset++; /* ... a recursion pointer is always two octets long ... */
-      }
-      return offset; /* ... and is always the final part of a name */
-    } else {
-      start = offset;
-      offset += len;
-      if (NULL != name) {
-	i = (NULL != name_buf) ? strlen(name_buf) : 0;
-	name_buf = (char*) realloc(name_buf, i+len+2);
-	strncpy(name_buf + i, answer->buf + start, len);
-	name_buf[i+len] = '\0';
-	strcat(name_buf, ".");
-      }
-    }
-  }
-  if (NULL != name) {
-    name_buf[strlen(name_buf)-1] = '\0'; /* remove the final dot */
-    *name = name_buf;
-  }
-  return offset;
-}
-
-static int get_mx_rdata(answer_t *answer, int offset, int len, mx_rdata_t **resp) {
-  *resp = (mx_rdata_t*) malloc(sizeof(mx_rdata_t));
-  (*resp)->preference = get16(answer->buf, offset);
-  get_domain_name(answer, offset+2, &(*resp)->exchange);
-  (*resp)->type = T_MX;
-
-  return 0;
-}
-
-static void free_mx_rdata(mx_rdata_t *resp) {
-  free(resp->exchange);
-  free(resp);
-}
-
-
-
-static int get_a_rdata(answer_t *answer, int offset, int len, a_rdata_t **resp) {
-  *resp = (a_rdata_t*) malloc(sizeof(a_rdata_t));
-  (*resp)->address = htonl(get32(answer->buf, offset));
-  (*resp)->type = T_A;
-
-  return 0;
-}
-
-static void free_a_rdata(a_rdata_t *resp) {
-  free(resp);
-}
-
-static int get_rdata(answer_t *answer, int type, int offset, int len, void **resp) {
-  switch (type) {
-  case T_MX: 
-    get_mx_rdata(answer, offset, len, (mx_rdata_t**)resp);
-    break;
-  case T_A: 
-    get_a_rdata(answer, offset, len, (a_rdata_t**)resp);
-    break;
-  default:
-    syslog(LOG_ERR, "type %d unsupported\n", type);
-  }
-  return 0;
-}
-
-static void free_rdata(void *resp) {
-  rdata_t *d = (rdata_t*)resp;
-  switch (d->type) {
-  case T_MX:
-    free_mx_rdata(resp);
-    break;
-  case T_A:
-    free_a_rdata(resp);
-    break;
-  default:
-    syslog(LOG_ERR, "type %d unsupported\n", d->type);
-  }
-}
-
-void free_rrs(void **resp) {
-  void **rdata;
-  for (rdata = resp; *rdata != NULL; rdata++) {
-    free_rdata(*rdata);
-  }
-  free(resp);
-}
-
-
-
-static void** get_rrs(char *domain, int qtype) {
-  unsigned int res, i, cnt, len, offset, x, y, rdlength;
-  answer_t answer;
-  unsigned int class, type, ttl;
-  char *name;
-  void **rdata, **rdata2;
-  
-
-
-  res = res_search(domain, C_IN, qtype, (u_char*) &answer, sizeof(answer_t));
-  if (-1 == res) {
-    return NULL;
-  }
-
-
-  cnt = sizeof(HEADER);
-
-  /* query section */
-  for (y = 0; y < ntohs(answer.hdr.qdcount); y++) {
-    cnt = get_domain_name(&answer, cnt, NULL);
-    type = get16(answer.buf, cnt);
-    cnt += 2;
-    class = get16(answer.buf, cnt);
-    cnt += 2;
-  }
-
-  /* answer section */
-  rdata = (void**)malloc(sizeof(void*) * (ntohs(answer.hdr.ancount)+1));
-  for (y = 0; y < ntohs(answer.hdr.ancount); y++) {
-    cnt = get_domain_name(&answer, cnt, NULL);
-    type = get16(answer.buf, cnt);
-    assert(type==qtype);
-    cnt += 2;
-    class = get16(answer.buf, cnt);
-    cnt += 2;
-    ttl = get32(answer.buf, cnt);
-    cnt += 4;
-    rdlength = get16(answer.buf, cnt);
-    cnt += 2;
-    rdata2 = rdata+y;
-    get_rdata(&answer, type, cnt, rdlength, rdata2);
-    cnt += rdlength;
-  }
-
-  rdata2 = rdata+y;
-  *((void**)rdata2) = NULL;
-
-  return rdata;
-}
-
-mx_rdata_t** get_mx_rrs(char *domain) {
-  return (mx_rdata_t**) get_rrs(domain, T_MX);
-}
-
-a_rdata_t** get_a_rrs(char *domain) {
-  return (a_rdata_t**) get_rrs(domain, T_A);
-}
-
-
-
-
-#define min(A,B) ((A<B) ? A : B)
-mx_rdata_t** get_best_mx_rrs(char *domain) {
-  mx_rdata_t **all_mx_rrs, **mx_rdata2, **best_mx_rrs;
-  int min_pref = 10000000;
-  int all_cnt = 0;
-  int best_cnt = 0;
-  int i = 0;
-
-  all_mx_rrs = get_mx_rrs(domain);
-  if (NULL == all_mx_rrs) 
-    return NULL;
-
-
-  /* how much are there at all and what is the minimum preference */
-  for (mx_rdata2 = all_mx_rrs; *mx_rdata2 != NULL; mx_rdata2++) {
-    all_cnt++;
-    min_pref = min(min_pref, (*mx_rdata2)->preference);
-  }
-
-  /* how much are there of the minimum preference */
-  for (mx_rdata2 = all_mx_rrs; *mx_rdata2 != NULL; mx_rdata2++)
-    if ((*mx_rdata2)->preference == min_pref)
-      best_cnt++;
-
-  if (all_cnt == best_cnt) {
-    /* all of them are minimum */
-    return all_mx_rrs;
-  } else {
-    /* space for the minimum pref rr's */
-    best_mx_rrs = (mx_rdata_t**) malloc(sizeof(mx_rdata_t*) * (best_cnt+1));
-    for (mx_rdata2 = all_mx_rrs; *mx_rdata2 != NULL; mx_rdata2++) {
-      if ((*mx_rdata2)->preference == min_pref) {
-	/* is a minimum one, keep it */
-	*(best_mx_rrs+i) = *mx_rdata2;
-	i++;
-      } else {
-	/* it's not, free it */
-	free_mx_rdata(*mx_rdata2);
-      }
-    }
-    /* free the old container */
-    free(all_mx_rrs);
-    /* terminate the new container */
-    *((int**)(best_mx_rrs+i)) = NULL;
-    
-    return best_mx_rrs;
-  }
-}
-    
-    
-  
-
-  
-/* #define _TEST_MODE_ */
-#ifdef _TEST_MODE_    
-  
-
-int main(int argc, char **argv) {
-  char default_domain[] = "test.de";
-  char *domain = default_domain;
-  mx_rdata_t **mx_rdata, **mx_rdata2;
-  a_rdata_t **a_rdata, **a_rdata2;
-  int a;
-
-  if (argc > 1) {
-    domain = argv[1];
-  }
-
-  printf("before get_mx_rrs: %s\n", domain);
-
-  mx_rdata = get_mx_rrs(domain);
-  for (mx_rdata2 = mx_rdata; *mx_rdata2 != NULL; mx_rdata2++) {
-    printf("preference: %d, exchange: %s\n", (*mx_rdata2)->preference, (*mx_rdata2)->exchange);
-  }
-
-  free_rrs((void**)mx_rdata);
-
-
-  printf("------------------\n");
-
-  mx_rdata = get_best_mx_rrs(domain);
-
-
-  for (mx_rdata2 = mx_rdata; *mx_rdata2 != NULL; mx_rdata2++) {
-    printf("preference: %d, exchange: %s\n", (*mx_rdata2)->preference, (*mx_rdata2)->exchange);
-
-    a_rdata = get_a_rrs((*mx_rdata2)->exchange);
-    for (a_rdata2 = a_rdata; *a_rdata2 != NULL; a_rdata2++) {
-      a = (*a_rdata2)->address;
-      printf("address: %04x\n", a);
-      printf("         %d.%d.%d.%d\n", (a&0xff000000)>>24, (a&0x00ff0000)>>16, (a&0x0000ff00)>>8, a&0x000000ff);
-    }
-    free_rrs((void**)a_rdata);
-
-  }
-
-  free_rrs((void**)mx_rdata);
-
-/*   printf("------------------\n"); */
-
-/*   a_rdata = get_a_rrs("www.microsoft.com.nsatc.net"); */
-/*   for (a_rdata2 = a_rdata; *a_rdata2 != NULL; a_rdata2++) { */
-/*     a = (*a_rdata2)->address; */
-/*     printf("address: %04x\n", a); */
-/*     printf("         %d.%d.%d.%d\n", (a&0xff000000)>>24, (a&0x00ff0000)>>16, (a&0x0000ff00)>>8, a&0x000000ff); */
-/*   } */
-/*   free_rrs((void**)a_rdata); */
-
-
-}
-
-#endif /* _TEST_MODE_ */
-  

smmapdfw/libsmmapdfw/dns.h

@@ -1,40 +0,0 @@
-#ifndef _DNS_H_
-#define _DNS_H_
-
-struct mx_rdata_s {
-  int type;
-  int preference;
-  char *exchange;
-};
-
-typedef struct mx_rdata_s mx_rdata_t;
-
-struct a_rdata_s {
-  int type;
-  unsigned int address;
-};
-
-typedef struct a_rdata_s a_rdata_t;
-
-struct rdata_s {
-  int type;
-  union {
-    mx_rdata_t mx;
-    a_rdata_t a;
-  } data;
-};
-
-typedef struct rdata_s rdata_t;
-
-
-void free_rrs(void **resp);
-mx_rdata_t** get_mx_rrs(char *domain);
-mx_rdata_t** get_best_mx_rrs(char *domain);
-a_rdata_t** get_a_rrs(char *domain);
-
-
-
-
-#endif /* _DNS_H_ */  
-
-  

smmapdfw/libsmmapdfw/dvl.h

@@ -0,0 +1,8 @@
+#ifndef _DVL_H_
+#define _DVL_H_
+
+#define dvl(a, b) (((a) == NULL) ? (b) : (a))
+#define dvls(a) dvl((a), "<NULL_STRING>")
+
+#endif
+

smmapdfw/libsmmapdfw/htbuffer.c

@@ -0,0 +1,142 @@
+/*
+    Copyright (C) 2005 Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <string.h>
+#include <sys/types.h>
+#include <assert.h>
+#include <syslog.h>
+
+#include "htmalloc.h"
+#include "htbuffer.h"
+
+
+
+#define MAX(A, B)  ((A) > (B) ? (A) : (B))
+#define MIN(A, B)  ((A) < (B) ? (A) : (B))
+
+htbuffer_t *htbuffer_init(unsigned int start_size) {
+  htbuffer_t *b;
+
+  b = (htbuffer_t*) htmalloc(sizeof(htbuffer_t));
+
+  b->current_buf_size = (start_size % DEFAULT_CHUNK_SIZE) 
+    ? (start_size + (DEFAULT_CHUNK_SIZE - start_size % DEFAULT_CHUNK_SIZE)) 
+    : start_size;
+    
+  b->max_size = DEFAULT_MAX_SIZE;
+
+  b->buf = (char*) htmalloc(sizeof(char) * b->current_buf_size);
+  memset(b->buf, 0, b->current_buf_size);
+
+  return b;
+}
+
+void htbuffer_set_max_size(htbuffer_t *b, unsigned int s) {
+  b->max_size = s;
+}
+
+void htbuffer_free(htbuffer_t *b) {
+  free(b->buf);
+  free(b);
+}
+    
+
+unsigned int htbuffer_strlen(htbuffer_t *b) {
+  return strlen(b->buf);
+}
+
+htbuffer_t *htbuffer_memcpy_w_offset(htbuffer_t *dest, unsigned int offset, const char *src, unsigned int src_size) {
+  int new_buf_size;
+
+/*   printf("src_size=%d, offset=%d, cbs=%d\n", src_size, offset, dest->current_buf_size); */
+  if (src_size + offset > dest->current_buf_size) {
+    /* grow buffer */
+    int pos = src_size + offset;
+    new_buf_size = (pos % DEFAULT_CHUNK_SIZE) 
+      ? (pos + (DEFAULT_CHUNK_SIZE - (pos % DEFAULT_CHUNK_SIZE))) 
+      : pos;
+
+    if (new_buf_size > dest->max_size) {
+      syslog(LOG_ERR, "htbuffer (%p) htbuffer_memcpy_w_offset: new size too large %d (max=%d)",
+	     dest, new_buf_size, dest->max_size);
+      exit(154);
+    }
+    
+    syslog(LOG_INFO, "htbuffer (%p) htbuffer_memcpy_w_offset: increase buffer from %d to %d\n",
+	   dest, dest->current_buf_size, new_buf_size);
+    dest->buf = (char*) htrealloc(dest->buf, sizeof(char) * new_buf_size);
+    memset(dest->buf + dest->current_buf_size, 0, new_buf_size - dest->current_buf_size);
+    dest->current_buf_size = new_buf_size;
+  }
+
+  memcpy(dest->buf + offset, src, src_size);
+
+  return dest;
+}
+
+
+htbuffer_t *htbuffer_clear(htbuffer_t *dest) {
+  memset(dest->buf, 0, dest->current_buf_size);
+  return dest;
+}
+
+htbuffer_t *htbuffer_memcpy(htbuffer_t *dest, const char *src, unsigned int src_size) {
+  return htbuffer_memcpy_w_offset(dest, 0, src, src_size);
+}
+
+htbuffer_t *htbuffer_strcpy_w_offset(htbuffer_t *dest, unsigned int offset, const char *src) {
+  return htbuffer_memcpy_w_offset(dest, offset, src, strlen(src)+1);
+}
+
+htbuffer_t *htbuffer_strcpy(htbuffer_t *dest, const char *src) {
+  return htbuffer_strcpy_w_offset(dest, 0, src);
+}
+
+htbuffer_t *htbuffer_strncpy_w_offset(htbuffer_t *dest, unsigned int offset, const char *src, unsigned int n) {
+  return htbuffer_memcpy_w_offset(dest, offset, src, MIN(strlen(src)+1, n));
+}
+
+htbuffer_t *htbuffer_strncpy(htbuffer_t *dest, const char *src, unsigned int n) {
+  return htbuffer_strncpy_w_offset(dest, 0, src, n);
+}
+
+htbuffer_t *htbuffer_strcat(htbuffer_t *dest, const char *src) {
+  return htbuffer_strcpy_w_offset(dest, strlen(dest->buf), src);
+}
+
+htbuffer_t *htbuffer_strncat(htbuffer_t *dest, const char *src, unsigned int n) {
+  return htbuffer_strncpy_w_offset(dest, strlen(dest->buf), src, n);
+}
+
+
+
+
+
+
+
+  
+
+
+

smmapdfw/libsmmapdfw/htbuffer.h

@@ -0,0 +1,59 @@
+/*
+    Copyright (C) 2005, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
+#ifndef _HTBUFFER_H_
+#define _HTBUFFER_H_
+
+#define DEFAULT_MAX_SIZE 16*1024*1024
+#define DEFAULT_CHUNK_SIZE 1024
+
+typedef struct htbuffer_s {
+  char *buf;
+  unsigned int current_buf_size;
+  unsigned int max_size;
+} htbuffer_t;
+
+
+void htbuffer_set_max_size(htbuffer_t *b, unsigned int s);
+htbuffer_t *htbuffer_init(unsigned int start_size);
+void htbuffer_free(htbuffer_t *b);
+
+unsigned int htbuffer_strlen(htbuffer_t *b);
+
+htbuffer_t *htbuffer_memcpy_w_offset(htbuffer_t *dest, unsigned int offset, const char *src, unsigned int src_size);
+htbuffer_t *htbuffer_memcpy(htbuffer_t *dest, const char *src, unsigned int src_size);
+
+
+htbuffer_t *htbuffer_strcpy_w_offset(htbuffer_t *dest, unsigned int offset, const char *src);
+htbuffer_t *htbuffer_strcpy(htbuffer_t *dest, const char *src);
+
+htbuffer_t *htbuffer_strncpy_w_offset(htbuffer_t *dest, unsigned int offset, const char *src, unsigned int n);
+htbuffer_t *htbuffer_strncpy(htbuffer_t *dest, const char *src, unsigned int n);
+
+htbuffer_t *htbuffer_strncat(htbuffer_t *dest, const char *src, unsigned int n);
+htbuffer_t *htbuffer_strcat(htbuffer_t *dest, const char *src);
+
+
+
+#endif /* _HTBUFFER_H_ */  
+
+  

smmapdfw/libsmmapdfw/htbuffertest.c

@@ -0,0 +1,217 @@
+/*
+    Copyright (C) 2005 Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <syslog.h>
+
+#include "htbuffer.h"
+
+
+  
+
+int main(int argc, char **args) {
+  htbuffer_t *b;
+  char* output;
+  int size;
+  int res;
+
+
+  /* ------------------------------------------------------------------------------------------- */
+  b = htbuffer_init(512);
+  if (b->current_buf_size != 1024)
+    printf("1. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else
+    printf("1. OK\n");
+  htbuffer_free(b);
+
+  /* ------------------------------------------------------------------------------------------- */
+  b = htbuffer_init(519);
+  if (b->current_buf_size != 1024)
+    printf("2. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else
+    printf("2. OK\n");
+  htbuffer_free(b);
+
+  /* ------------------------------------------------------------------------------------------- */
+  b = htbuffer_init(2500);
+  if (b->current_buf_size != 3072)
+    printf("3. FAILURE: wrong current_buf_size (%d), expected 3072\n", b->current_buf_size);
+  else
+    printf("3. OK\n");
+  htbuffer_free(b);
+
+  /* ------------------------------------------------------------------------------------------- */
+  b = htbuffer_init(1024);
+  if (b->current_buf_size != 1024)
+    printf("4. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else
+    printf("4. OK\n");
+  htbuffer_free(b);
+
+  /* ------------------------------------------------------------------------------------------- */
+  b = htbuffer_init(10240);
+  if (b->current_buf_size != 10240)
+    printf("5. FAILURE: wrong current_buf_size (%d), expected 10240\n", b->current_buf_size);
+  else
+    printf("5. OK\n");
+  htbuffer_free(b);
+
+  /* ------------------------------------------------------------------------------------------- */
+  #define TEXT1 "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa123"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT1);
+  if (b->current_buf_size != 1024)
+    printf("6. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else if (strcmp(TEXT1, b->buf))
+    printf("6. FAILURE: unexpected content\n");
+  else
+    printf("6. OK\n");
+  htbuffer_free(b);
+	   
+  /* ------------------------------------------------------------------------------------------- */
+  #define TEXT2 "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa123"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT2);
+  if (b->current_buf_size != 2048)
+    printf("7. FAILURE: wrong current_buf_size (%d), expected 2048\n", b->current_buf_size);
+  else if (strcmp(TEXT2, b->buf))
+    printf("7. FAILURE: unexpected content\n");
+  else
+    printf("7. OK\n");
+  htbuffer_free(b);
+	   
+  /* ------------------------------------------------------------------------------------------- */
+  #define TEXT3 "abcaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa123"
+  #define TEXT4 "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx123"
+  #define TEXT3_4 "abcxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx123"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT3);
+  htbuffer_strcpy_w_offset(b, 3, TEXT4);
+  if (b->current_buf_size != 1024)
+    printf("8. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else if (strcmp(TEXT3_4, b->buf))
+    printf("8. FAILURE: unexpected content {%s}\n", b->buf);
+  else
+    printf("8. OK\n");
+  htbuffer_free(b);
+	   
+  /* ------------------------------------------------------------------------------------------- */
+  #define TEXT5 "abc"
+  #define TEXT6 "xxxxxxyyyyyyyxxxxxxxxxxxxxxxxxxxxxxxx123"
+  #define TEXT5_6 "abcxxxxxxyyy"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT5);
+  htbuffer_strncpy_w_offset(b, 3, TEXT6, 9);
+  if (b->current_buf_size != 1024)
+    printf("9. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else if (strcmp(TEXT5_6, b->buf))
+    printf("9. FAILURE: unexpected content {%s}\n", b->buf);
+  else
+    printf("9. OK\n");
+  htbuffer_free(b);
+	   
+  /* ------------------------------------------------------------------------------------------- */
+  #define TEXT7 "---------XXX"
+  #define TEXT8 "xxxxxxyyyyyyyxxxxxxxxxxxxxxxxxxxxxxxx123"
+  #define TEXT9 "xxxxxxyyyXXX"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT7);
+  htbuffer_strncpy(b, TEXT8, 9);
+  if (b->current_buf_size != 1024)
+    printf("10. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else if (strcmp(TEXT9, b->buf))
+    printf("10. FAILURE: unexpected content {%s}\n", b->buf);
+  else
+    printf("10. OK\n");
+  htbuffer_free(b);
+
+/* ------------------------------------------------------------------------------------------- */
+  #define TEXT10 "aaa"
+  #define TEXT11 "bbb"
+  #define TEXT10_11 "aaabbb"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT10);
+  htbuffer_strcat(b, TEXT11);
+  if (b->current_buf_size != 1024)
+    printf("11. FAILURE: wrong current_buf_size (%d), expected 1024\n", b->current_buf_size);
+  else if (strcmp(TEXT10_11, b->buf))
+    printf("11. FAILURE: unexpected content {%s}\n", b->buf);
+  else
+    printf("11. OK\n");
+  htbuffer_free(b);
+	   
+/* ------------------------------------------------------------------------------------------- */
+  #define TEXT12 "aaa"
+  #define TEXT13 "bbb"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT12);
+  htbuffer_strcpy(b, TEXT13);
+  
+  if (strcmp(TEXT13, b->buf))
+    printf("12. FAULURE: unexpected content {%s}\n", b->buf);
+  else
+    printf("12. OK\n");
+  htbuffer_free(b);
+  
+/* ------------------------------------------------------------------------------------------- */
+  #define TEXT14 "aaa"
+  #define TEXT15 "bbb"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT14);
+  htbuffer_strcpy(b, "");
+  htbuffer_strcat(b, TEXT15);
+  
+  if (strcmp(TEXT15, b->buf))
+    printf("13. FAULURE: unexpected content {%s}\n", b->buf);
+  else
+    printf("13. OK\n");
+  htbuffer_free(b);
+  
+/* ------------------------------------------------------------------------------------------- */
+  #define TEXT16 "aaa"
+  #define TEXT17 "bbb"
+  #define TEXT17_1 "b"
+  b = htbuffer_init(512);
+  htbuffer_strcpy(b, TEXT16);
+  htbuffer_clear(b);
+  htbuffer_strncat(b, TEXT15, 1);
+  htbuffer_strncat(b, "\0", 1);
+  
+  if (strcmp(TEXT17_1, b->buf))
+    printf("13. FAULURE: unexpected content {%s}\n", b->buf);
+  else
+    printf("13. OK\n");
+  htbuffer_free(b);
+  
+
+
+}
+
+
+  
+  
+  
+

smmapdfw/libsmmapdfw/htcache.c

@@ -0,0 +1,177 @@
+/*
+    Copyright (C) 2004,2005 Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <stdlib.h>
+#include <syslog.h>
+#include <pthread.h>
+#include <errno.h>
+#include <time.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include <stdio.h>
+
+#if ENABLE_CACHE == 1
+#define DB_DBM_HSEARCH 1
+#include <db.h>
+#endif
+
+#include "htcache.h"
+#include "htmalloc.h"
+
+struct mydata_s {
+  time_t timestamp;
+  int value_size;
+  char value[1];
+};
+
+typedef struct mydata_s mydata_t;
+
+
+
+htcache_t *htcache_init(const char *file, int expiry) {
+#if ENABLE_CACHE == 1
+  htcache_t *handle = (htcache_t*) htmalloc(sizeof(htcache_t));
+  handle->mutex = (pthread_mutex_t*) htmalloc(sizeof(pthread_mutex_t));
+  pthread_mutex_init(handle->mutex, NULL);
+  pthread_mutex_unlock(handle->mutex);
+  handle->file = file;
+  handle->expiry = expiry;
+
+  return handle;
+#else
+  return NULL;
+#endif
+}
+
+void htcache_destroy(htcache_t *handle) {
+#if ENABLE_CACHE == 1
+  pthread_mutex_destroy(handle->mutex);
+  free(handle->mutex);
+  free(handle);
+#endif
+}
+
+void htcache_insert(htcache_t *handle, const char *key, const char *value, int value_size) {
+#if ENABLE_CACHE == 1
+  DBM *cache;
+  datum data, dkey;
+  int ret;
+  mydata_t *mydata;
+
+  syslog(LOG_DEBUG, "htcache_insert: inserting %s -> %s (size %d)", key, (char*) value, value_size);
+  dkey.dsize = strlen(key) + 1; /* one more for the terminating \0 */
+  dkey.dptr = (char*) key;
+  data.dsize = (sizeof(mydata_t) + value_size + 1);
+  mydata = (mydata_t *) htmalloc(data.dsize);
+  mydata->timestamp = time(NULL);
+  mydata->value_size = value_size;
+  memcpy(mydata->value, value, value_size);
+  data.dptr = (char*) mydata;
+  
+  pthread_mutex_lock(handle->mutex);
+  if (NULL != (cache = dbm_open(handle->file, O_RDWR | O_CREAT, 0644))) {
+    ret = dbm_store(cache, dkey, data, DBM_INSERT);
+    if (ret != 0) {
+      syslog(LOG_DEBUG, "htcache_insert: couldn't insert record");
+    } else {
+      syslog(LOG_DEBUG, "htcache_insert: record inserted");
+    }
+    dbm_close(cache);
+  }
+  pthread_mutex_unlock(handle->mutex);
+  
+  free(mydata);
+#else
+  syslog(LOG_DEBUG, "htcache_insert: cache disabled");
+#endif /* ENABLE_CACHE */
+}
+
+
+int htcache_lookup(htcache_t *handle, const char* key, char** value, int* value_size2) {
+#if ENABLE_CACHE == 1
+  DBM *cache;
+  datum data, dkey;
+  char *output;
+  mydata_t *mydata;
+  int value_size, ret, res = -1;
+
+  syslog(LOG_DEBUG, "htcache_lookup: looking up %s, expiry %d",
+	 key, handle->expiry);
+  
+  if (NULL != (cache = dbm_open(handle->file, O_RDONLY, 0644))) {
+    dkey.dsize = strlen(key) + 1; /* one more for the terminating \0 */
+    dkey.dptr = (char*) key;
+    data = dbm_fetch(cache, dkey);
+    if (NULL == data.dptr) {
+      syslog(LOG_DEBUG, "htcache_lookup: nothing found");
+      dbm_close(cache);
+    } else {
+      mydata = (mydata_t *) data.dptr;
+      syslog(LOG_DEBUG, "htcache_lookup: found: %s %d %d %s (size %d)",
+	     key, mydata->timestamp, mydata->value_size, mydata->value, data.dsize);
+      if ((mydata->timestamp + handle->expiry) > time(NULL)) {
+	syslog(LOG_DEBUG, "htcache_lookup: not yet expired");
+	value_size = mydata->value_size;
+	output = (char*) htmalloc(value_size+5);
+	memcpy(output, mydata->value, value_size);
+
+	*value_size2 = value_size;
+	*value = output;
+	
+	/* Berkeley DB frees on its own! */
+	/* 	  free(data.dptr); */
+	dbm_close(cache);
+	res = 0;
+      } else {
+	syslog(LOG_DEBUG, "htcache_lookup: expired, will be deleted from cache");
+	/* free(data.dptr); --- Berkeley DB frees on its own */
+	dbm_close(cache);
+	
+	pthread_mutex_lock(handle->mutex);
+	if (NULL != (cache = dbm_open(handle->file, O_RDWR, 0644))) {
+	  ret = dbm_delete(cache, dkey);
+	  if (ret != 0) {
+	    syslog(LOG_DEBUG, "htcache_lookup: couldn't delete record");
+	  } else {
+	    syslog(LOG_DEBUG, "htcache_lookup: record deleted");
+	  }
+	  dbm_close(cache);
+	  res = -2;
+	}
+	pthread_mutex_unlock(handle->mutex);
+      }
+    }
+  }
+
+  return res;
+#else
+  return -1;
+#endif /* ENABLE_CACHE */
+}
+
+
+

smmapdfw/libsmmapdfw/htcache.h

@@ -0,0 +1,43 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
+#ifndef _HTCACHE_H_
+#define _HTCACHE_H_
+
+#include <pthread.h>
+
+
+typedef struct htcache_s {
+  const char *file;
+  int expiry;
+  pthread_mutex_t *mutex;
+} htcache_t;
+
+htcache_t *htcache_init(const char *file, int expiry);
+void htcache_destroy(htcache_t *handle);
+void htcache_insert(htcache_t *handle, const char *key, const char *value, int value_size);
+int htcache_lookup(htcache_t *handle, const char *key, char** value, int* value_size2);
+
+
+#endif /* _HTCACHE_H_ */  
+
+  

smmapdfw/libsmmapdfw/htcachetest.c

@@ -0,0 +1,131 @@
+/*
+    Copyright (C) 2004,2005 Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <syslog.h>
+
+#include "htcache.h"
+
+
+  
+
+int main(int argc, char **args) {
+  char* output;
+  int size;
+  int res;
+
+
+  htcache_t *c = htcache_init("/tmp/test-cache", 10);
+
+  openlog("htcachetest", LOG_PID, LOG_LOCAL2);
+
+  printf("Populating cache\n");
+  htcache_insert(c, "key1", "value1", 7);
+  htcache_insert(c, "key2", "value2", 7);
+  htcache_insert(c, "key3", "value3", 7);
+  htcache_insert(c, "key4", "value4", 7);
+  htcache_insert(c, "key5", "value5", 7);
+  htcache_insert(c, "key6", "value6", 7);
+  htcache_insert(c, "key7", "value7", 7);
+  htcache_insert(c, "key8", "value8", 7);
+  htcache_insert(c, "key9", "value9", 7);
+
+  res = htcache_lookup(c, "key", &output, &size);
+  if (-1 != res) {
+    printf("Failure when nothing should be found\n");
+  } else {
+    printf("Ok, not found when looking up not existing key\n");
+  }
+
+  res = htcache_lookup(c, "key5", &output, &size);
+  if (0 != res) {
+    printf("Failure when key5 should be found: %d\n", res);
+  } else {
+    printf("Ok, key5 found\n");
+    if (size != 7) {
+      printf("  Failure: invalid size: %d\n", size);
+    } else if (strcmp(output, "value5")) {
+      printf("  Failure: invalid data: %s\n", output);
+    }
+    free(output);
+  }
+
+  res = htcache_lookup(c, "key2", &output, &size);
+  if (0 != res) {
+    printf("Failure when key2 should be found: %d\n", res);
+  } else {
+    printf("Ok, key2 found\n");
+    if (size != 7) {
+      printf("  Failure: invalid size: %d\n", size);
+    } else if (strcmp(output, "value2")) {
+      printf("  Failure: invalid data: %s\n", output);
+    }
+    free(output);
+  }
+
+  printf("Add entry to cache\n");
+  htcache_insert(c, "key_9", "value_9", 8);
+
+  res = htcache_lookup(c, "key_9", &output, &size);
+  if (0 != res) {
+    printf("Failure when key_9 should be found: %d\n", res);
+  } else {
+    printf("Ok, key_9 found\n");
+    if (size != 8) {
+      printf("  Failure: invalid size: %d\n", size);
+    } else if (strcmp(output, "value_9")) {
+      printf("  Failure: invalid data: %s\n", output);
+    }
+    free(output);
+  }
+
+  printf("Sleeping a while\n");
+  sleep(15);
+
+
+  res = htcache_lookup(c, "key2", &output, &size);
+  if (-2 != res) {
+    printf("Failure when nothing should be found with expiry code\n");
+  } else {
+    printf("Ok, not found when looking up expired entry, got expiry code\n");
+  }
+
+  res = htcache_lookup(c, "key2", &output, &size);
+  if (-1 != res) {
+    printf("Failure when nothing should be found\n");
+  } else {
+    printf("Ok, not found when looking up already expired entry\n");
+  }
+
+
+  htcache_destroy(c);
+}
+
+
+  
+  
+  
+

smmapdfw/libsmmapdfw/htdns.c

@@ -0,0 +1,648 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+#include "config.h"
+
+#if HAVE_LIBDJBDNS
+// int h_errno;
+#else
+extern int h_errno;
+/* extern struct state _res; */
+#endif
+
+
+
+
+#include <sys/types.h>
+#include <netinet/in.h>
+#define BIND_8_COMPAT
+#include <arpa/nameser.h>
+#include <stdlib.h>
+#include <syslog.h>
+#include <stdio.h>
+#include <strings.h>
+#include <string.h>
+#include <errno.h>
+#include <assert.h>
+
+#if HAVE_LIBDJBDNS
+#include <djbdns/dns.h>
+#include <djbdns/alloc.h>
+#include <pthread.h>
+#else
+#include <resolv.h>
+#endif
+
+#include "htdns.h"
+#include "htmalloc.h"
+
+
+union answer_u {
+  HEADER hdr;
+  u_char buf[PACKETSZ+1];
+};
+
+typedef union answer_u answer_t;
+
+
+
+#define get32_x(b, o) htonl((b[o+3] << 24) + (b[o+2] << 16) + (b[o+1] << 8) + b[o])
+#define get32(b, o) ((b[o] << 24) + (b[o+1] << 16) + (b[o+2] << 8) + b[o+3])
+#define get16(b, o) ((b[o] << 8) + b[o+1])
+
+
+#if HAVE_LIBDJBDNS
+pthread_mutex_t dns_transmit_mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+
+
+
+
+static int get_domain_name(answer_t *answer, int offset, char **name) {
+  int start, len, i, offset2;
+  char *name_buf, *name_buf2, *remember_name_buf;
+  name_buf = NULL;
+
+
+  while (0 != (len = answer->buf[offset++])) {
+    if (0xC0 == (len & 0xC0)) {
+      if (NULL != name) { /* if we don't need the result, we don't need to recurse, since a ... */
+	offset2 = ((len & ~0xC0) << 8) + answer->buf[offset++];
+	get_domain_name(answer, offset2, &name_buf2);
+	remember_name_buf = name_buf;
+	name_buf = (char*) htrealloc(name_buf, ((NULL != name_buf) ? strlen(name_buf) : 0) + strlen(name_buf2) + 1);
+	if (NULL == remember_name_buf) {
+	  name_buf[0] = '\0';
+	}
+	strcat(name_buf, name_buf2);
+	free(name_buf2);
+	*name = name_buf;
+      } else {
+	offset++; /* ... a recursion pointer is always two octets long ... */
+      }
+      return offset; /* ... and is always the final part of a name */
+    } else {
+      start = offset;
+      offset += len;
+      if (NULL != name) {
+	i = (NULL != name_buf) ? strlen(name_buf) : 0;
+	name_buf = (char*) htrealloc(name_buf, i+len+2);
+	strncpy(name_buf + i, answer->buf + start, len);
+	name_buf[i+len] = '\0';
+	strcat(name_buf, ".");
+      }
+    }
+  }
+  if (NULL != name) {
+    if (name_buf != NULL) /* we can do this of course only if there is something */
+      name_buf[strlen(name_buf)-1] = '\0'; /* remove the final dot */
+    *name = name_buf;
+  }
+  return offset;
+}
+
+
+
+static int get_mx_rdata(answer_t *answer, int offset, int len, mx_rdata_t **resp) {
+  *resp = (mx_rdata_t*) htmalloc(sizeof(mx_rdata_t));
+  (*resp)->preference = get16(answer->buf, offset);
+  (*resp)->exchange = NULL;
+  get_domain_name(answer, offset+2, &(*resp)->exchange);
+  (*resp)->type = T_MX;
+
+  return 0;
+}
+
+static void free_mx_rdata(mx_rdata_t *resp) {
+  free(resp->exchange);
+  free(resp);
+}
+
+
+
+static int get_a_rdata(answer_t *answer, int offset, int len, a_rdata_t **resp) {
+  *resp = (a_rdata_t*) htmalloc(sizeof(a_rdata_t));
+  (*resp)->address = htonl(get32(answer->buf, offset));
+  (*resp)->type = T_A;
+
+  return 0;
+}
+
+static int get_cname_rdata(answer_t *answer, int offset, int len, cname_rdata_t **resp) {
+  *resp = (cname_rdata_t*) htmalloc(sizeof(cname_rdata_t));
+  (*resp)->cname = NULL;
+  get_domain_name(answer, offset, &(*resp)->cname);
+  (*resp)->type = T_CNAME;
+
+  return 0;
+}
+
+static void free_cname_rdata(cname_rdata_t *resp) {
+  free(resp->cname);
+  free(resp);
+}
+
+
+static void free_a_rdata(a_rdata_t *resp) {
+  free(resp);
+}
+
+static int get_rdata(answer_t *answer, int type, int offset, int len, void **resp) {
+  switch (type) {
+  case T_MX: 
+    get_mx_rdata(answer, offset, len, (mx_rdata_t**)resp);
+    break;
+  case T_A: 
+    get_a_rdata(answer, offset, len, (a_rdata_t**)resp);
+    break;
+  case T_CNAME: 
+    get_cname_rdata(answer, offset, len, (cname_rdata_t**)resp);
+    break;
+  default:
+    syslog(LOG_ERR, "type %d unsupported\n", type);
+  }
+  return 0;
+}
+
+static void free_rdata(void *resp) {
+  rdata_t *d = (rdata_t*)resp;
+  switch (d->type) {
+  case T_MX:
+    free_mx_rdata(resp);
+    break;
+  case T_A:
+    free_a_rdata(resp);
+    break;
+  case T_CNAME:
+    free_cname_rdata(resp);
+    break;
+  default:
+    syslog(LOG_ERR, "type %d unsupported\n", d->type);
+  }
+}
+
+void free_rrs(void **resp) {
+  void **rdata;
+  for (rdata = resp; *rdata != NULL; rdata++) {
+    free_rdata(*rdata);
+  }
+  free(resp);
+}
+
+
+
+static void** get_rrs(char *domain, int qtype) {
+  unsigned int res, i, cnt, len, offset, x, y, rdlength;
+  answer_t *answer;
+  unsigned int class, type, ttl;
+  char *name;
+  void **rdata, **rdata2;
+
+
+#if HAVE_LIBDJBDNS
+  struct dns_transmit dt = {0};
+  char *q = NULL;
+#endif
+  
+
+  syslog(LOG_DEBUG, "get_rrs: looking up domain %s, qtype %d", domain, qtype);
+
+#if HAVE_LIBDJBDNS
+  {
+    char s[64];
+    int flagrecursive = 1;
+    char t[2];
+    char localip[4] = "\0\0\0\0";
+    iopause_fd x[1];
+    struct taia deadline;
+    struct taia stamp;
+    
+    
+    t[0] = '\0';
+    t[1] = qtype;
+
+    if (dns_resolvconfip(s) == -1) {
+      syslog(LOG_ERR, "failure in dns_resolvconfip: %d, %s\n",
+      	     errno, strerror(errno));
+      return NULL;
+    }
+    
+    syslog(LOG_DEBUG, "get_rrs: (1) q = %p", q);
+    dns_domain_fromdot(&q, domain, strlen(domain));
+    syslog(LOG_DEBUG, "get_rrs: (2) q = %p", q);
+
+    pthread_mutex_lock(&dns_transmit_mutex);
+    res = dns_transmit_start(&dt, s, flagrecursive, q, t, localip);
+    syslog(LOG_DEBUG, "get_rrs: (3) q = %p", q);
+    pthread_mutex_unlock(&dns_transmit_mutex);
+
+    if (res == -1) {
+      //syslog(LOG_ERR, "failure in dns_transmit_start: %d, %s\n", 
+      //errno, strerror(errno));
+      return NULL;
+    }
+    
+    for (;;) {
+      int r;
+
+      taia_now(&stamp);
+      taia_uint(&deadline,120);
+      taia_add(&deadline, &deadline, &stamp);
+      pthread_mutex_lock(&dns_transmit_mutex);
+      dns_transmit_io(&dt, x, &deadline);
+      pthread_mutex_unlock(&dns_transmit_mutex);
+
+      iopause(x, 1, &deadline, &stamp);
+
+      pthread_mutex_lock(&dns_transmit_mutex);
+      r = dns_transmit_get(&dt, x, &stamp);
+      pthread_mutex_unlock(&dns_transmit_mutex);
+
+      if (-1 == r) {
+	//syslog(LOG_ERR, "failure in dns_transmit_get: %d, %s\n",
+	//errno, strerror(errno));
+
+	pthread_mutex_lock(&dns_transmit_mutex);
+    	dns_transmit_free(&dt);
+	pthread_mutex_unlock(&dns_transmit_mutex);
+
+	return NULL;
+      }
+      
+      if (1 == r)
+	break;
+    }
+
+    answer = (answer_t*) dt.packet;
+  }
+#else
+  {
+    answer_t lanswer;
+
+    syslog(LOG_DEBUG, "get_rrs: before res_search");
+    res = res_search(domain, C_IN, qtype, (u_char*) &lanswer, sizeof(answer_t));
+    if (-1 == res) {
+      syslog(LOG_ERR, "get_rrs: error in res_search: h_errno=%d, errno=%d, (%s)", 
+	     h_errno, errno, strerror(errno));
+      return NULL;
+    }
+    answer = &lanswer;
+  }
+#endif
+
+  cnt = sizeof(HEADER);
+
+#if 1
+  syslog(LOG_DEBUG, "id: %d\n", answer->hdr.id);
+  syslog(LOG_DEBUG, "qr: %d\n", answer->hdr.qr);
+  syslog(LOG_DEBUG, "oc: %d\n", answer->hdr.opcode);
+  syslog(LOG_DEBUG, "aa: %d\n", answer->hdr.aa);
+  syslog(LOG_DEBUG, "tc: %d\n", answer->hdr.tc);
+  syslog(LOG_DEBUG, "rd: %d\n", answer->hdr.rd);
+  syslog(LOG_DEBUG, "ra: %d\n", answer->hdr.ra);
+  //  syslog(LOG_DEBUG, "ad: %d\n", answer->hdr.ad);
+  //  syslog(LOG_DEBUG, "cd: %d\n", answer->hdr.cd);
+  syslog(LOG_DEBUG, "rc: %d\n", answer->hdr.rcode);
+  syslog(LOG_DEBUG, "qdcount: %d\n", ntohs(answer->hdr.qdcount));
+  syslog(LOG_DEBUG, "ancount: %d\n", ntohs(answer->hdr.ancount));
+  syslog(LOG_DEBUG, "nscount: %d\n", ntohs(answer->hdr.nscount));
+  syslog(LOG_DEBUG, "arcount: %d\n", ntohs(answer->hdr.arcount));
+#endif
+
+  /* query section */
+  for (y = 0; y < ntohs(answer->hdr.qdcount); y++) {
+    cnt = get_domain_name(answer, cnt, NULL);
+    type = get16(answer->buf, cnt);
+    cnt += 2;
+    class = get16(answer->buf, cnt);
+    cnt += 2;
+  }
+
+  /* answer section */
+  rdata = (void**)htmalloc(sizeof(void*) * (ntohs(answer->hdr.ancount)+1));
+  for (y = 0; y < ntohs(answer->hdr.ancount); y++) {
+    cnt = get_domain_name(answer, cnt, NULL);
+    type = get16(answer->buf, cnt);
+    syslog(LOG_DEBUG, "get_rrs: answer type %d", type);
+
+    //if (type != qtype) 
+    //  printf("answer type mismatch: %d != %d\n", type, qtype);
+/*     assert(type==qtype); */
+
+    cnt += 2;
+    class = get16(answer->buf, cnt);
+    cnt += 2;
+    ttl = get32(answer->buf, cnt);
+    cnt += 4;
+    rdlength = get16(answer->buf, cnt);
+    cnt += 2;
+    rdata2 = rdata+y;
+    get_rdata(answer, type, cnt, rdlength, rdata2);
+    cnt += rdlength;
+  }
+
+  rdata2 = rdata+y;
+  *((void**)rdata2) = NULL;
+
+#if HAVE_LIBDJBDNS
+  pthread_mutex_lock(&dns_transmit_mutex);
+  dns_transmit_free(&dt);
+  pthread_mutex_unlock(&dns_transmit_mutex);
+
+  syslog(LOG_DEBUG, "get_rrs: (4) q = %p", q);
+  alloc_free(q);
+  q = NULL;
+#endif
+
+
+
+  return rdata;
+
+
+}
+
+
+
+mx_rdata_t** get_mx_rrs(char *domain) {
+  if (domain == NULL)
+    return NULL;
+
+  rdata_t **rdata = (rdata_t**) get_rrs(domain, T_MX);
+
+  if (NULL == rdata) {
+    return NULL;
+  }
+  
+  if (NULL == *rdata) {
+    free(rdata);
+    return NULL;
+  }
+
+  rdata_t **rdata2;
+  mx_rdata_t **mx_rdata = NULL;
+  int i = 0; // one for the termination
+  for (rdata2 = rdata; *rdata2 != NULL; rdata2++) {
+    if ((*rdata2)->type == T_MX) {
+      mx_rdata = (mx_rdata_t**) htrealloc(mx_rdata, sizeof(mx_rdata_t*) * (i + 2));
+      *(mx_rdata + i) = (mx_rdata_t*) *rdata2;
+      i++;
+    } else {
+      /* it's not, free it */
+      free_rdata(*rdata2);
+    }
+  }
+  
+  /* free the old container */
+  free(rdata);
+  
+  /* terminate the new container */
+  if (mx_rdata != NULL)
+    *((int**)(mx_rdata + i)) = NULL;
+
+  return mx_rdata;
+}
+
+
+
+a_rdata_t** inner_get_a_rrs(char *domain, int *depth) {
+  //printf("depth: %d, domain: %s\n", *depth, domain);
+  if (*depth > 5) {
+    //printf("loop\n");
+    return NULL;
+  }
+  if (domain == NULL)
+    return NULL;
+
+  cname_rdata_t **cname_rdata;
+
+  rdata_t **rdata = (rdata_t**) get_rrs(domain, T_A);
+
+  if (NULL == rdata) {
+    return NULL;
+  }
+  
+  if (NULL == *rdata) {
+    free(rdata);
+    return NULL;
+  }
+
+  rdata_t **rdata2;
+  a_rdata_t **a_rdata = NULL;
+  int i = 0; // one for the termination
+  for (rdata2 = rdata; *rdata2 != NULL; rdata2++) {
+    //printf("  depth: %d, rdata2: %p\n", *depth, rdata2);
+    if ((*rdata2)->type == T_A) {
+      a_rdata = (a_rdata_t**) htrealloc(a_rdata, sizeof(a_rdata_t*) * (i + 2));
+      *(a_rdata + i) = *rdata2;
+      i++;
+    } else if ((*rdata2)->type == T_CNAME) {
+      cname_rdata_t *cname_rdata = (cname_rdata_t*) *rdata2;
+      (*depth)++;
+      a_rdata_t **a_rdata_recurse = inner_get_a_rrs(cname_rdata->cname, depth);
+      if ((NULL != a_rdata_recurse) && (NULL != *a_rdata_recurse)) {
+	a_rdata_t **a_rdata2;
+	for (a_rdata2 = a_rdata_recurse; *a_rdata2 != NULL; a_rdata2++) {
+	  a_rdata = (a_rdata_t**) htrealloc(a_rdata, sizeof(a_rdata_t*) * (i + 2));
+	  *(a_rdata + i) = *a_rdata2;
+	  i++;
+	}
+	free(a_rdata_recurse);
+      } else if (NULL != a_rdata_recurse) {
+	free(a_rdata_recurse);
+      }
+      free_rdata(cname_rdata);
+    } else {
+      /* it's not, free it */
+      free_rdata(*rdata2);
+    }
+  }
+  
+  /* free the old container */
+  free(rdata);
+  
+  /* terminate the new container */
+  if (a_rdata != NULL)
+    *((int**)(a_rdata + i)) = NULL;
+
+  return a_rdata;
+}
+
+
+a_rdata_t** get_a_rrs(char *domain) {
+  if (NULL == domain)
+    return NULL;
+
+  char *myDomain = domain;
+
+  struct in_addr addr;
+  if (myDomain[0] == '[' && myDomain[strlen(myDomain)-1] == ']') {
+    syslog(LOG_DEBUG, "get_a_rrs: this is something (hopefully an IP address) in square brackets");
+    myDomain[strlen(myDomain)-1] = '\0';
+    myDomain++;
+  }
+
+  a_rdata_t **a_rdata = NULL;
+  if (inet_aton(myDomain, &addr)) {
+    syslog(LOG_DEBUG, "get_a_rss: not a name but an address");
+
+    a_rdata = (a_rdata_t**) htmalloc(sizeof(a_rdata_t*) * 2);
+
+    a_rdata_t *resp = (a_rdata_t*) htmalloc(sizeof(a_rdata_t));
+    resp->address = addr.s_addr;
+    resp->type = T_A;
+
+    *a_rdata = resp;
+    *(a_rdata + 1) = NULL;
+  } else {
+    int i = 0;
+    a_rdata = inner_get_a_rrs(myDomain, &i);
+  }
+  return a_rdata;
+}
+
+
+
+#define min(A,B) ((A<B) ? A : B)
+mx_rdata_t** get_best_mx_rrs(char *domain) {
+  if (domain == NULL)
+    return NULL;
+
+  int i = 0;
+
+
+  mx_rdata_t **all_mx_rrs = get_mx_rrs(domain);
+  if (NULL == all_mx_rrs) 
+    return NULL;
+
+
+  /* how much are there at all and what is the minimum preference */
+  int min_pref = 10000000;
+  int all_cnt = 0;
+  mx_rdata_t **mx_rdata2;
+  for (mx_rdata2 = all_mx_rrs; *mx_rdata2 != NULL; mx_rdata2++) {
+    all_cnt++;
+    min_pref = min(min_pref, (*mx_rdata2)->preference);
+  }
+
+  //printf("all_cnt: %d, min_pref: %d\n", all_cnt, min_pref);
+
+  /* how much are there of the minimum preference */
+  int best_cnt = 0;
+  for (mx_rdata2 = all_mx_rrs; *mx_rdata2 != NULL; mx_rdata2++)
+    if ((*mx_rdata2)->preference == min_pref)
+      best_cnt++;
+  //printf("best_cnt: %d\n", best_cnt);
+
+  if (all_cnt == best_cnt) {
+    /* all of them are minimum */
+    return all_mx_rrs;
+  } else {
+    /* space for the minimum pref rr's */
+    mx_rdata_t **best_mx_rrs = (mx_rdata_t**) htmalloc(sizeof(mx_rdata_t*) * (best_cnt+1));
+    for (mx_rdata2 = all_mx_rrs; *mx_rdata2 != NULL; mx_rdata2++) {
+      if ((*mx_rdata2)->preference == min_pref) {
+	/* is a minimum one, keep it */
+	*(best_mx_rrs+i) = *mx_rdata2;
+	i++;
+      } else {
+	/* it's not, free it */
+	free_rdata(*mx_rdata2);
+      }
+    }
+    /* free the old container */
+    free(all_mx_rrs);
+    /* terminate the new container */
+    *((int**)(best_mx_rrs+i)) = NULL;
+    
+    return best_mx_rrs;
+  }
+}
+    
+    
+  
+
+  
+/* #define _TEST_MODE_ */
+#ifdef _TEST_MODE_    
+  
+
+int main(int argc, char **argv) {
+  char default_domain[] = "test.de";
+  char *domain = default_domain;
+  mx_rdata_t **mx_rdata, **mx_rdata2;
+  a_rdata_t **a_rdata, **a_rdata2;
+  int a;
+
+  if (argc > 1) {
+    domain = argv[1];
+  }
+
+  openlog("htdns-test", LOG_PID, LOG_LOCAL2);
+
+
+  printf("before get_mx_rrs: %s\n", domain);
+
+  mx_rdata = get_mx_rrs(domain);
+  for (mx_rdata2 = mx_rdata; *mx_rdata2 != NULL; mx_rdata2++) {
+    printf("preference: %d, exchange: %s\n", (*mx_rdata2)->preference, (*mx_rdata2)->exchange);
+  }
+
+  free_rrs((void**)mx_rdata);
+
+
+  printf("------------------\n");
+
+  mx_rdata = get_best_mx_rrs(domain);
+
+
+  for (mx_rdata2 = mx_rdata; *mx_rdata2 != NULL; mx_rdata2++) {
+    printf("preference: %d, exchange: %s\n", (*mx_rdata2)->preference, (*mx_rdata2)->exchange);
+
+    a_rdata = get_a_rrs((*mx_rdata2)->exchange);
+    for (a_rdata2 = a_rdata; *a_rdata2 != NULL; a_rdata2++) {
+      a = (*a_rdata2)->address;
+      printf("address: %04x\n", a);
+      printf("         %d.%d.%d.%d\n", (a&0xff000000)>>24, (a&0x00ff0000)>>16, (a&0x0000ff00)>>8, a&0x000000ff);
+    }
+    free_rrs((void**)a_rdata);
+
+  }
+
+  free_rrs((void**)mx_rdata);
+
+/*   printf("------------------\n"); */
+
+/*   a_rdata = get_a_rrs("www.microsoft.com.nsatc.net"); */
+/*   for (a_rdata2 = a_rdata; *a_rdata2 != NULL; a_rdata2++) { */
+/*     a = (*a_rdata2)->address; */
+/*     printf("address: %04x\n", a); */
+/*     printf("         %d.%d.%d.%d\n", (a&0xff000000)>>24, (a&0x00ff0000)>>16, (a&0x0000ff00)>>8, a&0x000000ff); */
+/*   } */
+/*   free_rrs((void**)a_rdata); */
+
+
+
+  closelog();
+}
+
+#endif /* _TEST_MODE_ */
+  
+

smmapdfw/libsmmapdfw/htdns.h

@@ -0,0 +1,70 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
+#ifndef _DNS_H_
+#define _DNS_H_
+
+struct mx_rdata_s {
+  int type;
+  int preference;
+  char *exchange;
+};
+
+typedef struct mx_rdata_s mx_rdata_t;
+
+struct cname_rdata_s {
+  int type;
+  char *cname;
+};
+
+typedef struct cname_rdata_s cname_rdata_t;
+
+struct a_rdata_s {
+  int type;
+  unsigned int address;
+};
+
+typedef struct a_rdata_s a_rdata_t;
+
+struct rdata_s {
+  int type;
+  union {
+    mx_rdata_t mx;
+    a_rdata_t a;
+    cname_rdata_t cname;
+  } data;
+};
+
+typedef struct rdata_s rdata_t;
+
+
+void free_rrs(void **resp);
+mx_rdata_t** get_mx_rrs(char *domain);
+mx_rdata_t** get_best_mx_rrs(char *domain);
+a_rdata_t** get_a_rrs(char *domain);
+cname_rdata_t** get_cname_rrs(char *domain);
+
+
+
+#endif /* _DNS_H_ */  
+
+  

smmapdfw/libsmmapdfw/htdnstest.c

@@ -0,0 +1,83 @@
+#if 0
+
+/*
+    Copyright (C) 2004,2005 Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#if HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <syslog.h>
+#include <string.h>
+
+#include "htdns.h"
+
+
+  
+
+int main(int argc, char **args) {
+  if (argc != 3) {
+    printf("give domain to test and query type on commandline\n");
+    exit(1);
+  }
+
+  char *domain = args[1];
+  char *type =   args[2];
+  
+  if (! strcmp(type, "mx")) {
+    mx_rdata_t **mx_rdata = get_best_mx_rrs(domain);
+    if (mx_rdata == NULL) {
+      printf("no mx-rr found\n");
+    } else {
+      mx_rdata_t **mx_rdata2;
+      for (mx_rdata2 = mx_rdata; *mx_rdata2 != NULL; mx_rdata2++) {
+	printf("--> %d, %s\n", (*mx_rdata2)->preference, (*mx_rdata2)->exchange);
+      }
+    
+      free_rrs((void**)mx_rdata);
+    }
+  } else if (! strcmp(type, "a")) {
+    a_rdata_t **a_rdata = get_a_rrs(domain);
+    if (a_rdata == NULL) {
+      printf("nothing found\n");
+    } else {
+      a_rdata_t **a_rdata2;
+      for (a_rdata2 = a_rdata; *a_rdata2 != NULL; a_rdata2++) {
+	printf("--> %08x, %d.%d.%d.%d\n", htonl((*a_rdata2)->address),
+	       (htonl((*a_rdata2)->address)&0xff000000)>>24, (htonl((*a_rdata2)->address)&0x00ff0000)>>16,
+	       (htonl((*a_rdata2)->address)&0x0000ff00)>>8, (htonl((*a_rdata2)->address)&0x000000ff));
+      }
+
+      free_rrs((void**)a_rdata);
+    }
+  }
+}
+
+
+#else
+main() {
+}  
+  
+  
+
+#endif

smmapdfw/libsmmapdfw/htmalloc.c

@@ -0,0 +1,57 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+#include <stdlib.h>
+#include <syslog.h>
+#include <string.h>
+#include "htmalloc.h"
+
+
+void *htmalloc(size_t size) {
+  void *p = malloc(size);
+  if (NULL == p) {
+    syslog(LOG_ERR, "htmalloc: out of memory");
+    exit(153);
+  }
+  return p;
+}
+
+void *htrealloc(void *ptr, size_t size) {
+  void *p = realloc(ptr, size);
+  if (NULL == p) {
+    syslog(LOG_ERR, "htremalloc: out of memory");
+    exit(153);
+  }
+  return p;
+}
+
+char *htstrdup(const char *s) {
+  char *p = htmalloc(strlen(s) + 1);
+  strcpy(p, s);
+  return p;
+}
+
+
+
+
+
+
+  

smmapdfw/libsmmapdfw/htmalloc.h

@@ -0,0 +1,34 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#ifndef _HTMALLOC_H_
+#define _HTMALLOC_H_
+
+#include <stdlib.h>
+
+void *htmalloc(size_t size);
+void *htrealloc(void *ptr, size_t size);
+char *htstrdup(const char *s);
+
+
+
+#endif /* _HTMALLOC_H_ */  
+
+  

smmapdfw/libsmmapdfw/queue.c

@@ -1,4 +1,28 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
 #include "queue.h"
+#include "htmalloc.h"
+#include <syslog.h>
 
 #ifdef _TEST_MODE_
 #include <stdio.h>
@@ -23,7 +47,7 @@ void queue_destroy(ht_queue_t *q) {
 int queue_put(ht_queue_t *q, void *d) {
   queue_entry_t *entry;
 
-  entry = (queue_entry_t *) malloc(sizeof(queue_entry_t));
+  entry = (queue_entry_t *) htmalloc(sizeof(queue_entry_t));
   if (NULL == entry)
     return -1;
 
@@ -51,30 +75,46 @@ int queue_put(ht_queue_t *q, void *d) {
 }
 
 void *queue_get_wait(ht_queue_t *q) {
+  return queue_get_wait_w_timeout(q, 0);
+}
+
+void *queue_get_wait_w_timeout(ht_queue_t *q, int timeout_seconds) {
   queue_entry_t *entry = NULL;
   void *d = NULL;
+  int rc = 0;
 
   pthread_mutex_lock(&q->mutex);
 
   while ((NULL == q->head) && (NULL == q->tail)) {
-    pthread_cond_wait(&q->cond, &q->mutex);
+    if (timeout_seconds == 0) {
+      pthread_cond_wait(&q->cond, &q->mutex);
+    } else {
+      struct timespec ts;
+      ts.tv_sec = time(0) + timeout_seconds;
+      ts.tv_nsec = 0;
+      rc = pthread_cond_timedwait(&q->cond, &q->mutex, &ts);
+      if (rc != 0) // terminate loop for timeout
+	break;
+    }
   }
 
-  entry = q->head;
+  if (rc == 0) {
+    entry = q->head;
 
-  if (NULL != q->head) {
-    q->head = q->head->prev;
-  }
-
-  if (NULL == q->head) {
-    q->tail = NULL;
-  } else {
-    q->head->next = NULL;
-  }
-
-  if (NULL != entry) {
-    d = entry->data;
-    free(entry);
+    if (NULL != q->head) {
+      q->head = q->head->prev;
+    }
+    
+    if (NULL == q->head) {
+      q->tail = NULL;
+    } else {
+      q->head->next = NULL;
+    }
+    
+    if (NULL != entry) {
+      d = entry->data;
+      free(entry);
+    }
   }
 
   pthread_mutex_unlock(&q->mutex);

smmapdfw/libsmmapdfw/queue.h

@@ -1,3 +1,23 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
 #ifndef _QUEUE_H_
 #define _QUEUE_H_
 
@@ -24,6 +44,7 @@ void queue_init(ht_queue_t *q);
 void queue_destroy(ht_queue_t *q);
 int queue_put(ht_queue_t *q, void *d);
 void *queue_get_wait(ht_queue_t *q);
+void *queue_get_wait_w_timeout(ht_queue_t *q, int timeout_seconds);
 
 
 #endif /* _QUEUE_H_ */  

smmapdfw/libsmmapdfw/safe_write.c

@@ -1,3 +1,23 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
 #include <syslog.h>
 #include <sys/select.h>
 #include <errno.h>

smmapdfw/libsmmapdfw/safe_write.h

@@ -1,3 +1,23 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
 #ifndef _SAFE_WRITE_H_
 #define _SAFE_WRITE_H_
 

smmapdfw/libsmmapdfw/smtp.c

@@ -1,3 +1,25 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+
 #include <stdlib.h>
 #include <syslog.h>
 #include <sys/types.h>
@@ -12,7 +34,7 @@
 #include <string.h>
 
 #include "smtp.h"
-
+#include "htmalloc.h"
 
 
 #define BUFSIZE 1024
@@ -21,7 +43,7 @@
 
 
 smtp_t *smtp_init(unsigned int address, int port, int timeout) {
-  smtp_t *handle = (smtp_t*) malloc(sizeof(smtp_t));
+  smtp_t *handle = (smtp_t*) htmalloc(sizeof(smtp_t));
 
   handle->address = address;
   handle->port = port;
@@ -30,7 +52,7 @@ smtp_t *smtp_init(unsigned int address, int port, int timeout) {
   handle->response_code = 0;
   handle->got_timeout = 0;
 
-  handle->buffer = (char*) malloc(BUFSIZE+5);
+  handle->buffer = (char*) htmalloc(BUFSIZE+5);
 
   return handle;
 }
@@ -196,9 +218,7 @@ int smtp_command(smtp_t *handle, char *command, char *arg) {
 }
 
 int smtp_connect(smtp_t *handle) {
-  int err;
-  int c;
-  int res;
+  int err, c, res, optval;
   fd_set wrfs;
   struct timeval tv;
   
@@ -209,6 +229,13 @@ int smtp_connect(smtp_t *handle) {
     return -1;
   }
 
+  optval = 0x10; /* TOS=lowdelay*/
+  err = setsockopt(handle->socket, IPPROTO_IP, IP_TOS, (void*)&optval, sizeof(optval));
+  if (-1 == err) {
+    syslog(LOG_DEBUG, "smtp_connect: unable to set IPTOS_LOWDELAY: %d (%s)", errno, strerror(errno));
+    return -1;
+  }
+
   c = fcntl(handle->socket, F_GETFL);
   if (-1 == c) {
     syslog(LOG_DEBUG, "smtp_connect: unable to get flags, errno: %d (%s)", errno, strerror(errno));

smmapdfw/libsmmapdfw/smtp.h

@@ -1,3 +1,23 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
 #ifndef _SMTP_H_
 #define _SMTP_H_
 

smmapdfw/libsmmapdfw/stats.c

@@ -0,0 +1,163 @@
+/*
+    Copyright (C) 2004, Wolfgang Hottgenroth
+
+    This file is part of smmapdfw.
+
+    smmapdfw is free software; you can redistribute it and/or modify it
+    under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.  
+
+    smmapdfw is distributed in the hope that it will be useful, but WITHOUT
+    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+    License for more details. 
+
+    You should have received a copy of the GNU General Public License
+    along with smmapdfw. If not, write to the Free Software Foundation, 59
+    Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+
+#include <assert.h>
+#include <syslog.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "config.h"
+#include "cfg.h"
+
+
+#include "stats.h"
+#include "count.h"
+#include "htmalloc.h"
+
+
+statCounterEntry_t *statCounterList = NULL;
+unsigned int statCounterListLen = 0;
+
+counterDef_t *addOneCounterDef(counterDef_t *counterDef, unsigned int type, const char* name) {
+  int counterCnt = 0;
+  if (counterDef != NULL) {
+    counterDef_t *curCounterDef;
+    for (curCounterDef = counterDef; curCounterDef->type != SMM_TYPE_NULL; curCounterDef++, counterCnt++);
+  }
+  counterDef_t *newCounterDef = (counterDef_t*) htrealloc(counterDef, sizeof(counterDef_t) * (counterCnt + 2));
+  (newCounterDef + counterCnt)->type = type;
+  (newCounterDef + counterCnt)->name = name;
+  (newCounterDef + counterCnt + 1)->type = SMM_TYPE_NULL;
+  (newCounterDef + counterCnt + 1)->name = NULL;
+  return newCounterDef;
+}
+
+statCounter_t *initStatCounter(const char *moduleName, counterDef_t *counterDefs) {
+  counterDef_t *curCounterDef;
+  unsigned i = 0;
+  for (curCounterDef = counterDefs; curCounterDef->type != SMM_TYPE_NULL; curCounterDef++, i++);
+  statCounter_t *statCounter = (statCounter_t*) htmalloc(sizeof(statCounter_t) * (i + 1));
+  statCounter_t *curStatCounter;
+  for (curCounterDef = counterDefs, curStatCounter = statCounter; curCounterDef->type != SMM_TYPE_NULL; curCounterDef++, curStatCounter++) {
+    curStatCounter->magic = STAT_COUNTER_MAGIC;
+    curStatCounter->counter = (count_t*) htmalloc(sizeof(count_t));
+    count_init(curStatCounter->counter);
+  }
+  curStatCounter->magic = STAT_COUNTER_MAGIC;
+  curStatCounter->counter = NULL;
+
+
+  statCounterList = (statCounterEntry_t*) htrealloc(statCounterList, sizeof(statCounterEntry_t) * (statCounterListLen + 1));
+  (statCounterList + statCounterListLen)->moduleName = moduleName;
+  (statCounterList + statCounterListLen)->counterDefs = counterDefs;
+  (statCounterList + statCounterListLen)->statCounters = statCounter;
+  statCounterListLen++;
+
+  return statCounter;
+}
+
+void destroyStatCounters() {
+  int i;
+  statCounterEntry_t *s;
+  for (i = 0, s = statCounterList; i < statCounterListLen; i++, s++) {
+    statCounter_t *ss;
+    for (ss = s->statCounters; ss->counter != NULL; ss++) {
+      free(ss->counter);
+    }
+    free(s->counterDefs);
+    free(s->statCounters);
+  }
+  free(statCounterList);
+}
+
+unsigned int getStatCounter(statCounter_t *statCounter, int cnt_idx) {
+  statCounter_t *curStatCounter = statCounter + cnt_idx;
+  if (curStatCounter == NULL || curStatCounter->magic != STAT_COUNTER_MAGIC) {
+    syslog(LOG_CRIT, "STAT_COUNTER_MAGIC not matching in getStatCounter!!!");
+    return 0;
+  } else {
+    return count_get(curStatCounter->counter);
+  }
+}
+
+void incStatCounter(statCounter_t *statCounter, int cnt_idx) {
+  statCounter_t *curStatCounter = statCounter + cnt_idx;
+  if (curStatCounter == NULL || curStatCounter->magic != STAT_COUNTER_MAGIC) {
+    syslog(LOG_CRIT, "STAT_COUNTER_MAGIC not matching in incStatCounter!!!");
+  } else {
+    count_inc(curStatCounter->counter);
+  }
+}
+
+void decStatCounter(statCounter_t *statCounter, int cnt_idx) {
+  statCounter_t *curStatCounter = statCounter + cnt_idx;
+  if (curStatCounter == NULL || curStatCounter->magic != STAT_COUNTER_MAGIC) {
+    syslog(LOG_CRIT, "STAT_COUNTER_MAGIC not matching in decStatCounter!!!");
+  } else {
+    count_dec(curStatCounter->counter);
+  }
+}
+
+#define SYSLOG_BUF_SIZE 1024
+void outputStats(int stdout_nice, int syslog_nice) {
+  char syslogBuf[SYSLOG_BUF_SIZE];
+  int remainsSyslogBufLen = SYSLOG_BUF_SIZE - 1;
+
+  statCounterEntry_t *curStatCounterEntry;
+  unsigned int i;
+  for (curStatCounterEntry = statCounterList, i = 0; i < statCounterListLen; curStatCounterEntry++, i++) {
+    if (stdout_nice == 1)
+      printf("%s: ", curStatCounterEntry->moduleName);
+    else if (stdout_nice == 2)
+      printf("moduleName: %s\n", curStatCounterEntry->moduleName);
+    if (syslog_nice == 1) {
+      snprintf(syslogBuf, remainsSyslogBufLen, "%s: ", curStatCounterEntry->moduleName);
+      remainsSyslogBufLen -= strlen(syslogBuf);
+    } else if (syslog_nice == 2) {
+      snprintf(syslogBuf, remainsSyslogBufLen, "moduleName: %s\n", curStatCounterEntry->moduleName);
+      remainsSyslogBufLen -= strlen(syslogBuf);
+    }
+    statCounter_t *curStatCounter;
+    counterDef_t *curCounterDef;
+    for (curStatCounter = curStatCounterEntry->statCounters, curCounterDef = curStatCounterEntry->counterDefs; 
+	 curStatCounter->counter != NULL; 
+	 curStatCounter++, curCounterDef++) {
+      if (stdout_nice == 1)
+	printf("%d ", count_get(curStatCounter->counter));
+      else if (stdout_nice == 2)
+	printf("  %s: %d\n", curCounterDef->name, count_get(curStatCounter->counter));
+      if (syslog_nice == 1) {
+	snprintf(syslogBuf, remainsSyslogBufLen, "%d ", count_get(curStatCounter->counter));
+	remainsSyslogBufLen -= strlen(syslogBuf);
+      } else if (syslog_nice == 2) {
+	snprintf(syslogBuf, remainsSyslogBufLen, "  %s: %d\n", curCounterDef->name, count_get(curStatCounter->counter));
+	remainsSyslogBufLen -= strlen(syslogBuf);
+      }
+    }
+    if (stdout_nice == 1 || stdout_nice == 2)
+      printf("\n");
+    if (syslog_nice == 1 || syslog_nice == 2)
+      syslog(LOG_INFO, syslogBuf);
+  }
+}
+
+