pv-controller/config/config.yaml

global:
  scan_interval: 1
  log_level: DEBUG

mqtt:
  broker: emqx01-anonymous-cluster-internal.broker.svc.cluster.local
  port: 1883

modbus:
  gateway: 172.16.2.42


input:
  - name: pv_control
    subscribe_topic: IoT/PV/Control
    slave_id: 1
    address: 0
    register_type: coil
  - name: car_control
    subscribe_topic: IoT/Car/Control
    slave_id: 5
    address: 0
    register_type: coil

output:
  - name: pv_meter
    enabled: true 
    scan_rate: 15
    publish_topic: IoT/PV/Values
    slave_id: 2
    registers:
      - address: 0x0048
        attribute: importEnergyActive
        name: Import active energy
        unit: kWh
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x004c
        attribute: importEnergyReactive
        name: Import reactive energy
        unit: kVAh
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x004a
        attribute: exportEnergyActive
        name: Export active energy
        unit: kWh
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x004e
        attribute: exportEnergyReactive
        name: Export reactive energy
        unit: kVAh
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x0012
        attribute: powerApparent
        name: Apparent Power
        unit: W
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x000c
        attribute: powerActive
        name: Active Power
        unit: W
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x0018
        attribute: powerReactive
        name: Reactive Power
        unit: W
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x0058
        attribute: powerDemandPositive
        name: PositivePowerDemand
        unit: W
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x005c
        attribute: powerDemandReverse
        name: ReversePowerDemand
        unit: W
        register_type: input
        data_type: float32  
        adaptor: floatAdaptor
      - address: 0x001e
        attribute: factor
        name: Factor
        unit: "-"
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x0024
        attribute: angle
        name: Angle
        unit: degree
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x0000
        attribute: voltage
        name: Voltage
        unit: V
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x0006
        attribute: current
        name: Current
        unit: A
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
  - name: pv_control
    publish_topic: IoT/PV/Control/State
    scan_rate: 1
    raw_output: true # use only for output device with only one register, name this register 'output'
    slave_id: 1
    registers:
      - address: 0x0001
        attribute: output
        name: State
        unit: "-"
        register_type: holding
        data_type: int32
        adaptor: onOffAdaptor
  - name: car_control
    enabled: true
    publish_topic: IoT/Car/Control/State
    scan_rate: 1
    raw_output: true # use only for output device with only one register, name this register 'output'
    slave_id: 5
    registers:
      - address: 0x0001
        attribute: output
        name: State
        unit: "-"
        register_type: holding
        data_type: int32
        adaptor: onOffAdaptor
  - name: car_meter
    enabled: true
    publish_topic: IoT/Car/Values
    scan_rate: 15
    slave_id: 6
    registers:
      - address: 0
        attribute: voltageL1
        name: Voltage L1
        unit: V
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 2
        attribute: voltageL2
        name: Voltage L2
        unit: V
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 4
        attribute: voltageL3
        name: Voltage L3
        unit: V
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 6
        attribute: currentL1
        name: Current L1
        unit: A
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 8
        attribute: currentL2
        name: Current L2
        unit: A
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 10
        attribute: currentL3
        name: Current L3
        unit: A
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 12
        attribute: powerL1
        name: Power L1
        unit: W
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 14
        attribute: powerL2
        name: Power L2
        unit: W
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 16
        attribute: powerL3
        name: Power L3
        unit: W
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x0048
        attribute: totalImportEnergy
        name: Total Import Energy
        unit: kWh
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
      - address: 0x004a
        attribute: totalExportEnergy
        name: Total Export Energy
        unit: kWh
        register_type: input
        data_type: float32
        adaptor: floatAdaptor
  - name: car_feedback
    enabled: false
    publish_topic: IoT/Car/Feedback/State
    scan_rate: 1
    raw_output: true # use only for output device with only one register, name this register 'output'
    slave_id: 7
    registers:
      - address: 0x0010
        attribute: output
        name: State
        unit: "-"
        register_type: holding
        data_type: int32
        adaptor: onOffAdaptor