Add publish(topic,payload,retained) function

Example for ESP8266

CHANGES.txt

@@ -1,3 +1,9 @@
+2.3
+   * Add publish(topic,payload,retained) function
+
+2.2
+   * Change code layout to match Arduino Library reqs
+
 2.1
    * Add MAX_TRANSFER_SIZE def to chunk messages if needed
    * Reject topic/payloads that exceed MQTT_MAX_PACKET_SIZE

README.md

@@ -8,7 +8,7 @@ a server that supports MQTT.
 The library comes with a number of example sketches. See File > Examples > PubSubClient
 within the Arduino application.
 
-Full API documentation is available here: http://knolleary.github.io/pubsubclient/
+Full API documentation is available here: http://pubsubclient.knolleary.net
 
 ## Limitations
 
@@ -33,7 +33,8 @@ boards and shields, including:
    be sure to do a `Bridge.begin()` first
  - Arduino WiFi Shield - if you want to send packets > 90 bytes with this shield,
    enable the `MQTT_MAX_TRANSFER_SIZE` define in `PubSubClient.h`.
- - Sparkfun WiFly Shield – when used with [this library](https://github.com/dpslwk/WiFly)
+ - Sparkfun WiFly Shield – [library](https://github.com/dpslwk/WiFly)
+ - TI CC3000 WiFi - [library](https://github.com/sparkfun/SFE_CC3000_Library)
  - Intel Galileo/Edison
  - ESP8266
 

examples/mqtt_esp8266/mqtt_esp8266.ino

@@ -0,0 +1,126 @@
+/*
+ Basic ESP8266 MQTT example
+
+ This sketch demonstrates the capabilities of the pubsub library in combination
+ with the ESP8266 board/library.
+
+ It connects to an MQTT server then:
+  - publishes "hello world" to the topic "outTopic" every two seconds
+  - subscribes to the topic "inTopic", printing out any messages
+    it receives. NB - it assumes the received payloads are strings not binary
+  - If the first character of the topic "inTopic" is an 1, switch ON the ESP Led,
+    else switch it off
+
+ It will reconnect to the server if the connection is lost using a blocking
+ reconnect function. See the 'mqtt_reconnect_nonblocking' example for how to
+ achieve the same result without blocking the main loop.
+
+ To install the ESP8266 board, (using Arduino 1.6.4+):
+  - Add the following 3rd party board manager under "File -> Preferences -> Additional Boards Manager URLs":
+       http://arduino.esp8266.com/stable/package_esp8266com_index.json
+  - Open the "Tools -> Board -> Board Manager" and click install for the ESP8266"
+  - Select your ESP8266 in "Tools -> Board"
+
+*/
+
+#include <ESP8266WiFi.h>
+#include <PubSubClient.h>
+
+// Update these with values suitable for your network.
+
+const char* ssid = "........";
+const char* password = "........";
+const char* mqtt_server = "broker.mqtt-dashboard.com";
+
+WiFiClient espClient;
+PubSubClient client(espClient);
+long lastMsg = 0;
+char msg[50];
+int value = 0;
+
+void setup() {
+  pinMode(BUILTIN_LED, OUTPUT);     // Initialize the BUILTIN_LED pin as an output
+  Serial.begin(115200);
+  setup_wifi();
+  client.setServer(mqtt_server, 1883);
+  client.setCallback(callback);
+}
+
+void setup_wifi() {
+
+  delay(10);
+  // We start by connecting to a WiFi network
+  Serial.println();
+  Serial.print("Connecting to ");
+  Serial.println(ssid);
+
+  WiFi.begin(ssid, password);
+
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+
+  Serial.println("");
+  Serial.println("WiFi connected");
+  Serial.println("IP address: ");
+  Serial.println(WiFi.localIP());
+}
+
+void callback(char* topic, byte* payload, unsigned int length) {
+  Serial.print("Message arrived [");
+  Serial.print(topic);
+  Serial.print("] ");
+  for (int i = 0; i < length; i++) {
+    Serial.print((char)payload[i]);
+  }
+  Serial.println();
+
+  // Switch on the LED if an 1 was received as first character
+  if ((char)payload[0] == '1') {
+    digitalWrite(BUILTIN_LED, LOW);   // Turn the LED on (Note that LOW is the voltage level
+    // but actually the LED is on; this is because
+    // it is acive low on the ESP-01)
+  } else {
+    digitalWrite(BUILTIN_LED, HIGH);  // Turn the LED off by making the voltage HIGH
+  }
+
+}
+
+void reconnect() {
+  // Loop until we're reconnected
+  while (!client.connected()) {
+    Serial.print("Attempting MQTT connection...");
+    // Attempt to connect
+    if (client.connect("ESP8266Client")) {
+      Serial.println("connected");
+      // Once connected, publish an announcement...
+      client.publish("outTopic", "hello world");
+      // ... and resubscribe
+      client.subscribe("inTopic");
+    } else {
+      Serial.print("failed, rc=");
+      Serial.print(client.state());
+      Serial.println(" try again in 5 seconds");
+      // Wait 5 seconds before retrying
+      delay(5000);
+    }
+  }
+}
+void loop() {
+
+  if (!client.connected()) {
+    reconnect();
+  }
+  client.loop();
+
+  long now = millis();
+  if (now - lastMsg > 2000) {
+    lastMsg = now;
+    ++value;
+    snprintf (msg, 75, "hello world #%ld", value);
+    Serial.print("Publish message: ");
+    Serial.println(msg);
+    client.publish("outTopic", msg);
+  }
+}

library.properties

@@ -1,9 +1,9 @@
 name=PubSubClient
-version=2.1
+version=2.3
 author=Nick O'Leary <nick.oleary@gmail.com>
 maintainer=Nick O'Leary <nick.oleary@gmail.com>
 sentence=A client library for MQTT messaging.
-paragraph=MQTT is a lightweight messaging protocol ideal for small devices. This library allows you to send and receive MQTT messages from a remote server. It supports the latest MQTT 3.1.1 protocol and can be configured to use the older MQTT 3.1 if needed. It supports all Arduino Ethernet Client compatible hardware, including the Intel Galileo/Edison and ESP8266.
+paragraph=MQTT is a lightweight messaging protocol ideal for small devices. This library allows you to send and receive MQTT messages. It supports the latest MQTT 3.1.1 protocol and can be configured to use the older MQTT 3.1 if needed. It supports all Arduino Ethernet Client compatible hardware, including the Intel Galileo/Edison, ESP8266 and TI CC3000.
 category=Communication
-url=http://knolleary.github.io/pubsubclient/
+url=http://pubsubclient.knolleary.net
 architectures=*

src/PubSubClient.cpp

@@ -329,6 +329,10 @@ boolean PubSubClient::publish(const char* topic, const char* payload) {
     return publish(topic,(const uint8_t*)payload,strlen(payload),false);
 }
 
+boolean PubSubClient::publish(const char* topic, const char* payload, boolean retained) {
+    return publish(topic,(const uint8_t*)payload,strlen(payload),retained);
+}
+
 boolean PubSubClient::publish(const char* topic, const uint8_t* payload, unsigned int plength) {
     return publish(topic, payload, plength, false);
 }

src/PubSubClient.h

@@ -111,6 +111,7 @@ public:
    boolean connect(const char* id, const char* user, const char* pass, const char* willTopic, uint8_t willQos, boolean willRetain, const char* willMessage);
    void disconnect();
    boolean publish(const char* topic, const char* payload);
+   boolean publish(const char* topic, const char* payload, boolean retained);
    boolean publish(const char* topic, const uint8_t * payload, unsigned int plength);
    boolean publish(const char* topic, const uint8_t * payload, unsigned int plength, boolean retained);
    boolean publish_P(const char* topic, const uint8_t * payload, unsigned int plength, boolean retained);

tests/Makefile

@@ -4,9 +4,9 @@ TEST_SRC=$(wildcard ${SRC_PATH}/*_spec.cpp)
 TEST_BIN= $(TEST_SRC:${SRC_PATH}/%.cpp=${OUT_PATH}/%)
 VPATH=${SRC_PATH}
 SHIM_FILES=${SRC_PATH}/lib/*.cpp
-PSC_FILE=../PubSubClient/src/PubSubClient.cpp
+PSC_FILE=../src/PubSubClient.cpp
 CC=g++
-CFLAGS=-I${SRC_PATH}/lib -I../PubSubClient/src
+CFLAGS=-I${SRC_PATH}/lib -I../src
 
 all: $(TEST_BIN)
 

tests/src/publish_spec.cpp

@@ -63,7 +63,7 @@ int test_publish_bytes() {
 
 
 int test_publish_retained() {
-    IT("publishes retained");
+    IT("publishes retained - 1");
     ShimClient shimClient;
     shimClient.setAllowConnect(true);
 
@@ -88,6 +88,29 @@ int test_publish_retained() {
     END_IT
 }
 
+int test_publish_retained_2() {
+    IT("publishes retained - 2");
+    ShimClient shimClient;
+    shimClient.setAllowConnect(true);
+
+    byte connack[] = { 0x20, 0x02, 0x00, 0x00 };
+    shimClient.respond(connack,4);
+
+    PubSubClient client(server, 1883, callback, shimClient);
+    int rc = client.connect((char*)"client_test1");
+    IS_TRUE(rc);
+
+    byte publish[] = {0x31,0xc,0x0,0x5,0x74,0x6f,0x70,0x69,0x63,'A','B','C','D','E'};
+    shimClient.expect(publish,14);
+
+    rc = client.publish((char*)"topic",(char*)"ABCDE",true);
+    IS_TRUE(rc);
+
+    IS_FALSE(shimClient.error());
+
+    END_IT
+}
+
 int test_publish_not_connected() {
     IT("publish fails when not connected");
     ShimClient shimClient;
@@ -158,6 +181,7 @@ int main()
     test_publish();
     test_publish_bytes();
     test_publish_retained();
+    test_publish_retained_2();
     test_publish_not_connected();
     test_publish_too_long();
     test_publish_P();