led green blinking on network status

cube/User/Src/show.c

@@ -1,49 +1,46 @@
 #include <main.h>
 #include <show.h>
+#include <PontCoopScheduler.h>
+
 #include <stdint.h>
 #include <stdlib.h>
+
 #include <stm32f103xe.h>
 
 
-void show(signalPin_t signalPin, signalAction_t action) {
-    GPIO_TypeDef *port = NULL;
-    uint16_t pin = 0;
+typedef struct {
+    GPIO_TypeDef *port;
+    uint16_t pin;
+    signalAction_t currentState;
+} showElement_t;
 
-    switch (signalPin) {
-        case DEBUG_1:
-        port = Debug_Signal_1_GPIO_Port;
-        pin = Debug_Signal_1_Pin;
-        break;
+showElement_t showElement[] = {
+    { .port = Debug_Signal_1_GPIO_Port, .pin = Debug_Signal_1_Pin, .currentState = OFF },
+    { .port = Debug_Signal_2_GPIO_Port, .pin = Debug_Signal_2_Pin, .currentState = OFF },
+    { .port = LED_Red_GPIO_Port, .pin = LED_Red_Pin, .currentState = OFF },
+    { .port = LED_Green_GPIO_Port, .pin = LED_Green_Pin, .currentState = OFF },
+    { .port = NULL, .pin = 0, .currentState = OFF }
+};
 
-        case DEBUG_2:
-        port = Debug_Signal_2_GPIO_Port;
-        pin = Debug_Signal_2_Pin;
-        break;
-
-        case LED_RED:
-        port = LED_Red_GPIO_Port;
-        pin = LED_Red_Pin;
-        break;
-
-        case LED_GREEN:
-        port = LED_Green_GPIO_Port;
-        pin = LED_Green_Pin;
-        break;
-    }
-
-    if (port != NULL) {
-        switch (action) {
-            case ON:
-            HAL_GPIO_WritePin(port, pin, GPIO_PIN_SET);
-            break;
-
-            case OFF:
-            HAL_GPIO_WritePin(port, pin, GPIO_PIN_RESET);
-            break;
-
-            case TOGGLE:
-            HAL_GPIO_TogglePin(port, pin);
-            break;
+static void showHandler(void *handle) {
+    uint8_t idx = 0;
+    while (showElement[idx].port) {
+        if (showElement[idx].currentState == BLINK) {
+            HAL_GPIO_TogglePin(showElement[idx].port, showElement[idx].pin);
         }
+        idx++;
     }
 }
+
+void show(signalPin_t signalPin, signalAction_t action) {
+    showElement[signalPin].currentState = action;
+    if (action == ON || action == OFF) {
+        HAL_GPIO_WritePin(showElement[signalPin].port, showElement[signalPin].pin, ((action == ON) ? GPIO_PIN_SET : GPIO_PIN_RESET));
+    } else if (action == TOGGLE) {
+        HAL_GPIO_TogglePin(showElement[signalPin].port, showElement[signalPin].pin);
+    }
+}
+
+void showInit() {
+    schAdd(showHandler, NULL, 0, 250);
+}