first time generated

cube/.mxproject

@@ -6,6 +6,11 @@ SourceFiles=../Core/Src/main.c;../Core/Src/gpio.c;../Core/Src/adc.c;../Core/Src/
 HeaderPath=../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include;../Core/Inc;
 CDefines=USE_HAL_DRIVER;STM32F103xE;USE_HAL_DRIVER;USE_HAL_DRIVER;
 
+[PreviousUsedMakefileFiles]
+SourceFiles=Core/Src/main.c;Core/Src/gpio.c;Core/Src/adc.c;Core/Src/spi.c;Core/Src/usart.c;Core/Src/stm32f1xx_it.c;Core/Src/stm32f1xx_hal_msp.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Core/Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Core/Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;
+HeaderPath=Drivers/STM32F1xx_HAL_Driver/Inc;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F1xx/Include;Drivers/CMSIS/Include;Core/Inc;
+CDefines=USE_HAL_DRIVER;STM32F103xE;USE_HAL_DRIVER;USE_HAL_DRIVER;
+
 [PreviousGenFiles]
 AdvancedFolderStructure=true
 HeaderFileListSize=7
@@ -31,8 +36,3 @@ SourceFolderListSize=1
 SourcePath#0=/home/wn/Workspaces/MBusGateway3Variant/cube/Core/Src
 SourceFiles=;
 
-[PreviousUsedMakefileFiles]
-SourceFiles=Core/Src/main.c;Core/Src/gpio.c;Core/Src/adc.c;Core/Src/spi.c;Core/Src/usart.c;Core/Src/stm32f1xx_it.c;Core/Src/stm32f1xx_hal_msp.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Core/Src/system_stm32f1xx.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Core/Src/system_stm32f1xx.c;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;
-HeaderPath=Drivers/STM32F1xx_HAL_Driver/Inc;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;Drivers/CMSIS/Device/ST/STM32F1xx/Include;Drivers/CMSIS/Include;Core/Inc;
-CDefines=USE_HAL_DRIVER;STM32F103xE;USE_HAL_DRIVER;USE_HAL_DRIVER;
-

cube/Core/Inc/main.h

@@ -58,6 +58,8 @@ void Error_Handler(void);
 /* USER CODE END EFP */
 
 /* Private defines -----------------------------------------------------------*/
+#define debugUart huart4
+#define mbusUart huart5
 #define Loop_Enable_Pin GPIO_PIN_2
 #define Loop_Enable_GPIO_Port GPIOE
 #define Loop_Disable_Pin GPIO_PIN_3

cube/Core/Src/main.c

@@ -1,3 +1,4 @@
+// Processed by ../tools/insertMyCode.sh
 /* USER CODE BEGIN Header */
 /**
   ******************************************************************************
@@ -25,7 +26,9 @@
 #include "gpio.h"
 
 /* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
+/* USER CODE BEGIN Includes */
+#include "main2.h"
+
 
 /* USER CODE END Includes */
 
@@ -66,7 +69,9 @@ void SystemClock_Config(void);
   */
 int main(void)
 {
-  /* USER CODE BEGIN 1 */
+  /* USER CODE BEGIN 1 */
+  my_setup_1();
+
 
   /* USER CODE END 1 */
 
@@ -93,7 +98,9 @@ int main(void)
   MX_SPI3_Init();
   MX_UART4_Init();
   MX_UART5_Init();
-  /* USER CODE BEGIN 2 */
+  /* USER CODE BEGIN 2 */
+  my_setup_2();
+
 
   /* USER CODE END 2 */
 
@@ -103,7 +110,9 @@ int main(void)
   {
     /* USER CODE END WHILE */
 
-    /* USER CODE BEGIN 3 */
+    /* USER CODE BEGIN 3 */
+    my_loop();
+
   }
   /* USER CODE END 3 */
 }
@@ -163,10 +172,14 @@ void SystemClock_Config(void)
   */
 void Error_Handler(void)
 {
-  /* USER CODE BEGIN Error_Handler_Debug */
+  /* USER CODE BEGIN Error_Handler_Debug */
+  my_errorHandler();
+
   /* User can add his own implementation to report the HAL error return state */
 
-  /* USER CODE END Error_Handler_Debug */
+  /* USER CODE END Error_Handler_Debug */
+  while(1) { };
+
 }
 
 #ifdef  USE_FULL_ASSERT

cube/Core/Src/main.c-bak

@@ -0,0 +1,189 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "adc.h"
+#include "spi.h"
+#include "usart.h"
+#include "gpio.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_ADC1_Init();
+  MX_SPI2_Init();
+  MX_SPI3_Init();
+  MX_UART4_Init();
+  MX_UART5_Init();
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;
+  PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

cube/Core/Src/stm32f1xx_it.c

@@ -1,3 +1,4 @@
+// Processed by ../tools/insertMyCode.sh
 /* USER CODE BEGIN Header */
 /**
   ******************************************************************************
@@ -22,7 +23,9 @@
 #include "main.h"
 #include "stm32f1xx_it.h"
 /* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
+/* USER CODE BEGIN Includes */
+#include "main2.h"
+
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
@@ -186,7 +189,9 @@ void SysTick_Handler(void)
 
   /* USER CODE END SysTick_IRQn 0 */
   HAL_IncTick();
-  /* USER CODE BEGIN SysTick_IRQn 1 */
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+  SYSTICK_Callback();
+
 
   /* USER CODE END SysTick_IRQn 1 */
 }

cube/Core/Src/stm32f1xx_it.c-bak

@@ -0,0 +1,232 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f1xx_it.c
+  * @brief   Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32f1xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern UART_HandleTypeDef huart4;
+extern UART_HandleTypeDef huart5;
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/*           Cortex-M3 Processor Interruption and Exception Handlers          */
+/******************************************************************************/
+/**
+  * @brief This function handles Non maskable interrupt.
+  */
+void NMI_Handler(void)
+{
+  /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+  /* USER CODE END NonMaskableInt_IRQn 0 */
+  /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+
+  /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Hard fault interrupt.
+  */
+void HardFault_Handler(void)
+{
+  /* USER CODE BEGIN HardFault_IRQn 0 */
+
+  /* USER CODE END HardFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+    /* USER CODE END W1_HardFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Memory management fault.
+  */
+void MemManage_Handler(void)
+{
+  /* USER CODE BEGIN MemoryManagement_IRQn 0 */
+
+  /* USER CODE END MemoryManagement_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
+    /* USER CODE END W1_MemoryManagement_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Prefetch fault, memory access fault.
+  */
+void BusFault_Handler(void)
+{
+  /* USER CODE BEGIN BusFault_IRQn 0 */
+
+  /* USER CODE END BusFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_BusFault_IRQn 0 */
+    /* USER CODE END W1_BusFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles Undefined instruction or illegal state.
+  */
+void UsageFault_Handler(void)
+{
+  /* USER CODE BEGIN UsageFault_IRQn 0 */
+
+  /* USER CODE END UsageFault_IRQn 0 */
+  while (1)
+  {
+    /* USER CODE BEGIN W1_UsageFault_IRQn 0 */
+    /* USER CODE END W1_UsageFault_IRQn 0 */
+  }
+}
+
+/**
+  * @brief This function handles System service call via SWI instruction.
+  */
+void SVC_Handler(void)
+{
+  /* USER CODE BEGIN SVCall_IRQn 0 */
+
+  /* USER CODE END SVCall_IRQn 0 */
+  /* USER CODE BEGIN SVCall_IRQn 1 */
+
+  /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Debug monitor.
+  */
+void DebugMon_Handler(void)
+{
+  /* USER CODE BEGIN DebugMonitor_IRQn 0 */
+
+  /* USER CODE END DebugMonitor_IRQn 0 */
+  /* USER CODE BEGIN DebugMonitor_IRQn 1 */
+
+  /* USER CODE END DebugMonitor_IRQn 1 */
+}
+
+/**
+  * @brief This function handles Pendable request for system service.
+  */
+void PendSV_Handler(void)
+{
+  /* USER CODE BEGIN PendSV_IRQn 0 */
+
+  /* USER CODE END PendSV_IRQn 0 */
+  /* USER CODE BEGIN PendSV_IRQn 1 */
+
+  /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+  * @brief This function handles System tick timer.
+  */
+void SysTick_Handler(void)
+{
+  /* USER CODE BEGIN SysTick_IRQn 0 */
+
+  /* USER CODE END SysTick_IRQn 0 */
+  HAL_IncTick();
+  /* USER CODE BEGIN SysTick_IRQn 1 */
+
+  /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32F1xx Peripheral Interrupt Handlers                                    */
+/* Add here the Interrupt Handlers for the used peripherals.                  */
+/* For the available peripheral interrupt handler names,                      */
+/* please refer to the startup file (startup_stm32f1xx.s).                    */
+/******************************************************************************/
+
+/**
+  * @brief This function handles UART4 global interrupt.
+  */
+void UART4_IRQHandler(void)
+{
+  /* USER CODE BEGIN UART4_IRQn 0 */
+
+  /* USER CODE END UART4_IRQn 0 */
+  HAL_UART_IRQHandler(&huart4);
+  /* USER CODE BEGIN UART4_IRQn 1 */
+
+  /* USER CODE END UART4_IRQn 1 */
+}
+
+/**
+  * @brief This function handles UART5 global interrupt.
+  */
+void UART5_IRQHandler(void)
+{
+  /* USER CODE BEGIN UART5_IRQn 0 */
+
+  /* USER CODE END UART5_IRQn 0 */
+  HAL_UART_IRQHandler(&huart5);
+  /* USER CODE BEGIN UART5_IRQn 1 */
+
+  /* USER CODE END UART5_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

cube/Makefile

@@ -1,5 +1,6 @@
+# Processed by ../tools/insertMyCode.sh
 ##########################################################################################################################
-# File automatically-generated by tool: [projectgenerator] version: [3.10.0-B14] date: [Sun Oct 18 21:59:20 CEST 2020]
+# File automatically-generated by tool: [projectgenerator] version: [3.10.0-B14] date: [Sun Oct 18 22:15:54 CEST 2020]
 ##########################################################################################################################
 
 # ------------------------------------------------
@@ -36,6 +37,7 @@ BUILD_DIR = build
 ######################################
 # C sources
 C_SOURCES =  \
+User/Src/main2.c hottislib/PontCoopScheduler.c  \
 Core/Src/main.c \
 Core/Src/gpio.c \
 Core/Src/adc.c \
@@ -117,6 +119,8 @@ AS_INCLUDES =
 
 # C includes
 C_INCLUDES =  \
+-Ihottislib \
+-IUser/Inc \
 -ICore/Inc \
 -IDrivers/STM32F1xx_HAL_Driver/Inc \
 -IDrivers/STM32F1xx_HAL_Driver/Inc/Legacy \

cube/Makefile-bak

@@ -0,0 +1,197 @@
+##########################################################################################################################
+# File automatically-generated by tool: [projectgenerator] version: [3.10.0-B14] date: [Sun Oct 18 22:15:54 CEST 2020]
+##########################################################################################################################
+
+# ------------------------------------------------
+# Generic Makefile (based on gcc)
+#
+# ChangeLog :
+#	2017-02-10 - Several enhancements + project update mode
+#   2015-07-22 - first version
+# ------------------------------------------------
+
+######################################
+# target
+######################################
+TARGET = cube
+
+
+######################################
+# building variables
+######################################
+# debug build?
+DEBUG = 1
+# optimization
+OPT = -Og
+
+
+#######################################
+# paths
+#######################################
+# Build path
+BUILD_DIR = build
+
+######################################
+# source
+######################################
+# C sources
+C_SOURCES =  \
+Core/Src/main.c \
+Core/Src/gpio.c \
+Core/Src/adc.c \
+Core/Src/spi.c \
+Core/Src/usart.c \
+Core/Src/stm32f1xx_it.c \
+Core/Src/stm32f1xx_hal_msp.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c \
+Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c \
+Core/Src/system_stm32f1xx.c  
+
+# ASM sources
+ASM_SOURCES =  \
+startup_stm32f103xe.s
+
+
+#######################################
+# binaries
+#######################################
+PREFIX = arm-none-eabi-
+# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
+# either it can be added to the PATH environment variable.
+ifdef GCC_PATH
+CC = $(GCC_PATH)/$(PREFIX)gcc
+AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
+CP = $(GCC_PATH)/$(PREFIX)objcopy
+SZ = $(GCC_PATH)/$(PREFIX)size
+else
+CC = $(PREFIX)gcc
+AS = $(PREFIX)gcc -x assembler-with-cpp
+CP = $(PREFIX)objcopy
+SZ = $(PREFIX)size
+endif
+HEX = $(CP) -O ihex
+BIN = $(CP) -O binary -S
+ 
+#######################################
+# CFLAGS
+#######################################
+# cpu
+CPU = -mcpu=cortex-m3
+
+# fpu
+# NONE for Cortex-M0/M0+/M3
+
+# float-abi
+
+
+# mcu
+MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
+
+# macros for gcc
+# AS defines
+AS_DEFS = 
+
+# C defines
+C_DEFS =  \
+-DUSE_HAL_DRIVER \
+-DSTM32F103xE
+
+
+# AS includes
+AS_INCLUDES = 
+
+# C includes
+C_INCLUDES =  \
+-ICore/Inc \
+-IDrivers/STM32F1xx_HAL_Driver/Inc \
+-IDrivers/STM32F1xx_HAL_Driver/Inc/Legacy \
+-IDrivers/CMSIS/Device/ST/STM32F1xx/Include \
+-IDrivers/CMSIS/Include \
+-IDrivers/CMSIS/Include
+
+
+# compile gcc flags
+ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
+
+ifeq ($(DEBUG), 1)
+CFLAGS += -g -gdwarf-2
+endif
+
+
+# Generate dependency information
+CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
+
+
+#######################################
+# LDFLAGS
+#######################################
+# link script
+LDSCRIPT = STM32F103VCTx_FLASH.ld
+
+# libraries
+LIBS = -lc -lm -lnosys 
+LIBDIR = 
+LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
+
+# default action: build all
+all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
+
+
+#######################################
+# build the application
+#######################################
+# list of objects
+OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
+vpath %.c $(sort $(dir $(C_SOURCES)))
+# list of ASM program objects
+OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
+vpath %.s $(sort $(dir $(ASM_SOURCES)))
+
+$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR) 
+	$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
+
+$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
+	$(AS) -c $(CFLAGS) $< -o $@
+
+$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
+	$(CC) $(OBJECTS) $(LDFLAGS) -o $@
+	$(SZ) $@
+
+$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+	$(HEX) $< $@
+	
+$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
+	$(BIN) $< $@	
+	
+$(BUILD_DIR):
+	mkdir $@		
+
+#######################################
+# clean up
+#######################################
+clean:
+	-rm -fR $(BUILD_DIR)
+  
+#######################################
+# dependencies
+#######################################
+-include $(wildcard $(BUILD_DIR)/*.d)
+
+# *** EOF ***

cube/User/Src/main2.c

@@ -26,17 +26,12 @@ void blinkGreen(void *handle) {
 	HAL_GPIO_TogglePin(LED_Green_GPIO_Port, LED_Green_Pin);
 }
 
-void blinkBlue(void *handle) {
-	HAL_GPIO_TogglePin(LED_Blue_GPIO_Port, LED_Blue_Pin);
-}
-
 void helloWorld(void *handle) {
 	static char hello[] = "Hello World\n\r";
-	HAL_UART_Transmit_IT(&huart1, (uint8_t*) hello, strlen(hello));
+	HAL_UART_Transmit_IT(&debugUart, (uint8_t*) hello, strlen(hello));
 }
 
 void my_setup_2() {
-    schAdd(blinkBlue, NULL, 0, 250);
     schAdd(blinkRed, NULL, 0, 500);
 	schAdd(blinkGreen, NULL, 0, 1000);
 	schAdd(helloWorld, NULL, 0, 5000);

cube/cube.ioc

@@ -44,7 +44,7 @@ Mcu.Pin8=PB13
 Mcu.Pin9=PB14
 Mcu.PinsNb=22
 Mcu.ThirdPartyNb=0
-Mcu.UserConstants=
+Mcu.UserConstants=debugUart,huart4;mbusUart,huart5
 Mcu.UserName=STM32F103VCTx
 MxCube.Version=6.0.0
 MxDb.Version=DB.6.0.0