wn/libmbus
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Expanded manpage

Browse Source
This commit is contained in:
Tmtom 2012-07-19 22:56:22 +02:00
parent 3bc701e995
commit 84dd8c2352
1 changed files with 16 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
bin/libmbus.pod
View File

@ -62,6 +62,11 @@ There are following options/parameters:
For serial communication, use given I<BAUDRATE> (integer in Bd). If not used then
default baudrate of 9600 will be used.
libmbus supports following baud rates: 300, 600, 1200, 2400, 4800, 9600, 19200,
38400.
Note that your MBus gateway and/or MBus device will most likely support only
a subset of these. The most commonlu used/supported rates are probably 9600, 2400
and 300.
=item B<-d>
@ -92,8 +97,13 @@ character.
=item B<mbus-address>
MBus device address. Could be a primary address (an integer between 1 and 250) or
a secondary address (sixteen digit hexadecimal number).
MBus device address. Could be a primary address or a secondary address (sixteen
digit hexadecimal number).
The primary address should be an integer between 1 and 250 for addressing
individual devices. However the program does allow using any one byte number (i.e.
0 to 255) so that you can also use addresses reserved for physical or data link
layers management, secondary addressing, broadcasts, etc.
=item B<secondary-mbus-address>
@ -116,6 +126,10 @@ Try to switch baud rate of a device on address 59 from 2400Bd to 9600Bd:
mbus-serial-switch-baudrate -b 2400 /dev/ttyUSB0 59 9600
Readout a MBus device on address 59 at 2400Bd:
mbus-serial-request-data-multi-reply -b 2400 /dev/ttyS0 59
=head1 SEE ALSO
S<http://www.rscada.se/libmbus> and S<http://www.m-bus.com>