Removed unnessary code.

In w5200.h,
Remove  the Mask value 0xA0 in getSIMR() & setSIMR()
Add to the Mask value 0xA0 in getIR() & setIR()

Ethernet/W5100/w5100.c

@@ -1,7 +1,7 @@
 //*****************************************************************************
 //
-//! \file w5200.c
+//! \file w5100.c
-//! \brief W5200 HAL Interface.
+//! \brief W5100 HAL Interface.
 //! \version 1.0.0
 //! \date 2013/10/21
 //! \par  Revision history

Ethernet/W5100/w5100.h

@@ -196,7 +196,11 @@
  * - \ref MR_AI         	: Address Auto-Increment in Indirect Bus Interface
  * - \ref MR_IND         	: Indirect Bus Interface mode
  */
-#define MR					(_W5100_IO_BASE_ + (0x0000))  // Mode
+#if _WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_
+   #define MR					(_WIZCHIP_IO_BASE_ + (0x0000))  // Mode
+#else
+   #define MR					(_W5500_IO_BASE_ + (0x0000))  // Mode
+#endif   
 
 /**
  * @ingroup Common_register_group_W5100

Ethernet/W5200/w5200.h

@@ -199,7 +199,11 @@
  * - \ref MR_AI         	: Address Auto-Increment in Indirect Bus Interface
  * - \ref MR_IND         	: Indirect Bus Interface mode
  */
+#if  (_WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS_) 
+   #define MR					(_WIZCHIP_IO_BASE_ + (0x0000))  // Mode
+#else   
    #define MR					(_W5200_IO_BASE_ + (0x0000))  // Mode
+#endif   
 
 /**
  * @ingroup Common_register_group_W5200
@@ -1342,7 +1346,7 @@ void     WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len);
 		WIZCHIP_WRITE(_IMR_, imr)
 */		
 #define setIMR(imr) \
-		WIZCHIP_WRITE(IMR2, imr)
+		WIZCHIP_WRITE(IMR2, imr & 0xA0)
 
 /**
  * @ingroup Common_register_access_function_W5200
@@ -1356,7 +1360,7 @@ void     WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len);
 		WIZCHIP_READ(_IMR_)
 */		
 #define getIMR() \
-		WIZCHIP_READ(IMR2)
+		(WIZCHIP_READ(IMR2) & 0xA0)
 
 /**
  * @ingroup Common_register_access_function_W5200
@@ -1517,7 +1521,7 @@ void     WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len);
 		WIZCHIP_WRITE(IMR2, (imr2 & 0xA0))
 */		
 #define setIMR2(imr2) \
-		WIZCHIP_WRITE(_IMR_, (imr2 & 0xA0))
+		WIZCHIP_WRITE(_IMR_, imr2)
 #define  setSIMR(imr2)  setIMR2(imr2)
 
 /**
@@ -1532,7 +1536,7 @@ void     WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len);
 		(WIZCHIP_READ(IMR2) & 0xA0)
 */		
 #define getIMR2() \
-		(WIZCHIP_READ(_IMR_) & 0xA0)
+		WIZCHIP_READ(_IMR_)
 #define getSIMR()      getIMR2()
 ///////////////////////////////////
 // Socket N register I/O function //

Internet/FTPClient/ftpc.c

@@ -126,8 +126,6 @@ uint8_t ftpc_run(uint8_t * dbuf)
 #if defined(F_FILESYSTEM)
 						scan_files(ftpc.workingdir, dbuf, (int *)&size);
 						printf("\r\n%s\r\n", dbuf);
-						getMountedMemorySize(SPI_FLASHM, &totalSize, &availableSize);
-						printf(" - Available Memory Size : %ld kB / %ld kB ( %ld kB is used )\r\n", availableSize, totalSize, (totalSize - availableSize));
 #else
 						if (strncmp(ftpc.workingdir, "/$Recycle.Bin", sizeof("/$Recycle.Bin")) != 0)
 							size = sprintf(dbuf, "drwxr-xr-x 1 ftp ftp 0 Dec 31 2014 $Recycle.Bin\r\n-rwxr-xr-x 1 ftp ftp 512 Dec 31 2014 test.txt\r\n");
@@ -273,7 +271,7 @@ uint8_t ftpc_run(uint8_t * dbuf)
 			if(gDataPutGetStart){
 				switch(Command.Second){
 				case s_dir:
-					printf("dir waitng...\r\n");
+					printf("dir waiting...\r\n");
 					if((size = getSn_RX_RSR(DATA_SOCK)) > 0){ // Don't need to check SOCKERR_BUSY because it doesn't not occur.
 						printf("ok\r\n");
 						memset(dbuf, 0, _MAX_SS);
@@ -290,10 +288,11 @@ uint8_t ftpc_run(uint8_t * dbuf)
 						}
 						printf("Rcvd Data:\n\r%s\n\r", dbuf);
 						gDataPutGetStart = 0;
+						Command.Second = s_nocmd;
 					}
 					break;
 				case s_put:
-					printf("put waitng...\r\n");
+					printf("put waiting...\r\n");
 					if(strlen(ftpc.workingdir) == 1)
 						sprintf(ftpc.filename, "/%s", (uint8_t *)gMsgBuf);
 					else
@@ -335,10 +334,11 @@ uint8_t ftpc_run(uint8_t * dbuf)
 					}while(remain_filesize != 0);
 #endif
 					gDataPutGetStart = 0;
+					Command.Second = s_nocmd;
 					disconnect(DATA_SOCK);
 					break;
 				case s_get:
-					printf("get waitng...\r\n");
+					printf("get waiting...\r\n");
 					if(strlen(ftpc.workingdir) == 1)
 						sprintf(ftpc.filename, "/%s", (uint8_t *)gMsgBuf);
 					else
@@ -399,6 +399,7 @@ uint8_t ftpc_run(uint8_t * dbuf)
 						}
 					}
 					gDataPutGetStart = 0;
+					Command.Second = s_nocmd;
 #endif
 					break;
 				default:
@@ -504,14 +505,17 @@ char proc_ftpc(char * buf)
 		case R_150:
 			switch(Command.First){
 			case f_dir:
+				Command.First = f_nocmd;
 				Command.Second = s_dir;
 				gDataPutGetStart = 1;
 				break;
 			case f_get:
+				Command.First = f_nocmd;
 				Command.Second = s_get;
 				gDataPutGetStart = 1;
 				break;
 			case f_put:
+				Command.First = f_nocmd;
 				Command.Second = s_put;
 				gDataPutGetStart = 1;
 				break;

Internet/FTPClient/ftpc.h

@@ -16,7 +16,7 @@
 //#define F_FILESYSTEM
 
 /* Change to your Chipset Uart function, you have to activate this feature and implement.
- * Board_UARTGetCharBlocking()
+ * Change!! -> Board_UARTGetCharBlocking()
  * Below is an example of a function of lpc_chip library. */
 //#define ftp_getc()	Board_UARTGetCharBlocking()
 
@@ -27,6 +27,9 @@
 #ifndef	ftp_getc()
 #define Need_UARTGetCharBlocking_func
 #else
+/* Change library
+ * Change!! -> board_api.h,
+ * Below is an example of a function of lpc_chip library. */
 #include "board_api.h"
 #endif
 

Internet/httpServer/httpServer.c

@@ -9,8 +9,6 @@
 #include "httpParser.h"
 #include "httpUtil.h"
 
-#include "common.h"
-
 #ifdef	_USE_SDCARD_
 #include "ff.h" 	// header file for FatFs library (FAT file system)
 #endif