Version V3.0
Add to W5300
This commit is contained in:
Woo Youl Kim
@ -44,7 +44,7 @@
|
||||
/**
|
||||
@brief This function writes the data into W5200 registers.
|
||||
*/
|
||||
void WIZCHIP_WRITE(uint16_t AddrSel, uint8_t wb )
|
||||
void WIZCHIP_WRITE(uint32_t AddrSel, uint8_t wb )
|
||||
{
|
||||
WIZCHIP_CRITICAL_ENTER();
|
||||
WIZCHIP.CS._select();
|
||||
@ -55,13 +55,19 @@ void WIZCHIP_WRITE(uint16_t AddrSel, uint8_t wb )
|
||||
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF) >> 0);
|
||||
WIZCHIP.IF.SPI._write_byte(wb); // Data write (write 1byte data)
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_DIR_) )
|
||||
WIZCHIP.IF.BUS._write_byte(AddrSel,wb);
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
//WIZCHIP.IF.BUS._write_byte(AddrSel,wb);
|
||||
WIZCHIP.IF.BUS._write_data(AddrSel,wb);
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_) )
|
||||
|
||||
//add indirect bus
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_DR,wb);
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
//WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
//WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
//WIZCHIP.IF.BUS._write_byte(IDM_DR,wb);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR1,(AddrSel & 0x00FF));
|
||||
WIZCHIP.IF.BUS._write_data(IDM_DR,wb);
|
||||
#else
|
||||
#error "Unknown _WIZCHIP_IO_MODE_ in W5100. !!!"
|
||||
#endif
|
||||
@ -72,7 +78,7 @@ void WIZCHIP_WRITE(uint16_t AddrSel, uint8_t wb )
|
||||
/**
|
||||
@brief This function reads the value from W5200 registers.
|
||||
*/
|
||||
uint8_t WIZCHIP_READ(uint16_t AddrSel)
|
||||
uint8_t WIZCHIP_READ(uint32_t AddrSel)
|
||||
{
|
||||
uint8_t ret;
|
||||
|
||||
@ -85,13 +91,20 @@ uint8_t WIZCHIP_READ(uint16_t AddrSel)
|
||||
WIZCHIP.IF.SPI._write_byte((AddrSel & 0x00FF) >> 0);
|
||||
ret = WIZCHIP.IF.SPI._read_byte();
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_DIR_) )
|
||||
ret = WIZCHIP.IF.BUS._read_byte(AddrSel);
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
//ret = WIZCHIP.IF.BUS._read_byte(AddrSel);
|
||||
ret = WIZCHIP.IF.BUS._read_data(AddrSel);
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_) )
|
||||
|
||||
//add indirect bus
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
ret = WIZCHIP.IF.BUS._read_byte(IDM_DR);
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
//WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
//WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
//ret = WIZCHIP.IF.BUS._read_byte(IDM_DR);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR1,(AddrSel & 0x00FF));
|
||||
ret = WIZCHIP.IF.BUS._read_data(IDM_DR);
|
||||
|
||||
#else
|
||||
#error "Unknown _WIZCHIP_IO_MODE_ in W5100. !!!"
|
||||
#endif
|
||||
@ -105,36 +118,52 @@ uint8_t WIZCHIP_READ(uint16_t AddrSel)
|
||||
/**
|
||||
@brief This function writes into W5200 memory(Buffer)
|
||||
*/
|
||||
void WIZCHIP_WRITE_BUF(uint16_t AddrSel, uint8_t* pBuf, uint16_t len)
|
||||
void WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len)
|
||||
{
|
||||
uint16_t i = 0;
|
||||
|
||||
WIZCHIP_CRITICAL_ENTER();
|
||||
WIZCHIP.CS._select(); //M20150601 : Moved here.
|
||||
|
||||
#if( (_WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_SPI_))
|
||||
for(i = 0; i < len; i++)
|
||||
{
|
||||
WIZCHIP.CS._select();
|
||||
//M20150601 : Remove _select() to top-side
|
||||
//WIZCHIP.CS._select();
|
||||
WIZCHIP.IF.SPI._write_byte(0xF0);
|
||||
WIZCHIP.IF.SPI._write_byte((((uint16_t)(AddrSel+i)) & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.SPI._write_byte((((uint16_t)(AddrSel+i)) & 0x00FF) >> 0);
|
||||
WIZCHIP.IF.SPI._write_byte(pBuf[i]); // Data write (write 1byte data)
|
||||
WIZCHIP.CS._deselect();
|
||||
//M20150601 : Remove _select() to bottom-side
|
||||
//WIZCHIP.CS._deselect();
|
||||
}
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_DIR_) )
|
||||
for(i = 0; i < len; i++)
|
||||
WIZCHIP.IF.BUS._write_byte(AddrSel+i,pBuf[i]);
|
||||
for(i = 0; i < len; i++)
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
// WIZCHIP.IF.BUS._write_byte(AddrSel+i,pBuf[i]);
|
||||
WIZCHIP.IF.BUS._write_data(AddrSel+i,pBuf[i]);
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_) )
|
||||
WIZCHIP_WRITE(MR,WIZCHIP_READ(MR) | MR_AI);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
for(i = 0 ; i < len; i++)
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_DR,pBuf[i]);
|
||||
WIZCHIP_WRITE(MR, WIZCHIP_READ(MR) & ~MR_AI);
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
/*
|
||||
WIZCHIP_WRITE(MR,WIZCHIP_READ(MR) | MR_AI);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
for(i = 0 ; i < len; i++)
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_DR,pBuf[i]);
|
||||
WIZCHIP_WRITE(MR, WIZCHIP_READ(MR) & ~MR_AI);
|
||||
*/
|
||||
setMR(getMR()|MR_AI);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR1,(AddrSel & 0x00FF));
|
||||
for(i = 0 ; i < len; i++)
|
||||
WIZCHIP.IF.BUS._write_data(IDM_DR,pBuf[i]);
|
||||
setMR(getMR() & ~MR_AI);
|
||||
|
||||
#else
|
||||
#error "Unknown _WIZCHIP_IO_MODE_ in W5100. !!!!"
|
||||
#endif
|
||||
|
||||
|
||||
WIZCHIP.CS._deselect(); //M20150601 : Moved here.
|
||||
WIZCHIP_CRITICAL_EXIT();
|
||||
}
|
||||
|
||||
@ -142,35 +171,51 @@ void WIZCHIP_WRITE_BUF(uint16_t AddrSel, uint8_t* pBuf, uint16_t len)
|
||||
@brief This function reads into W5200 memory(Buffer)
|
||||
*/
|
||||
|
||||
void WIZCHIP_READ_BUF (uint16_t AddrSel, uint8_t* pBuf, uint16_t len)
|
||||
void WIZCHIP_READ_BUF (uint32_t AddrSel, uint8_t* pBuf, uint16_t len)
|
||||
{
|
||||
uint16_t i = 0;
|
||||
WIZCHIP_CRITICAL_ENTER();
|
||||
|
||||
#if( (_WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_SPI_))
|
||||
for(i = 0; i < len; i++)
|
||||
{
|
||||
WIZCHIP.CS._select();
|
||||
WIZCHIP.IF.SPI._write_byte(0x0F);
|
||||
WIZCHIP.IF.SPI._write_byte((uint16_t)((AddrSel+i) & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.SPI._write_byte((uint16_t)((AddrSel+i) & 0x00FF) >> 0);
|
||||
pBuf[i] = WIZCHIP.IF.SPI._read_byte();
|
||||
WIZCHIP.CS._deselect();
|
||||
}
|
||||
WIZCHIP.CS._select(); //M20150601 : Moved here.
|
||||
|
||||
#if( (_WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_SPI_))
|
||||
for(i = 0; i < len; i++)
|
||||
{
|
||||
//M20150601 : Remove _select() to top-side
|
||||
//WIZCHIP.CS._select();
|
||||
WIZCHIP.IF.SPI._write_byte(0x0F);
|
||||
WIZCHIP.IF.SPI._write_byte((uint16_t)((AddrSel+i) & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.SPI._write_byte((uint16_t)((AddrSel+i) & 0x00FF) >> 0);
|
||||
pBuf[i] = WIZCHIP.IF.SPI._read_byte();
|
||||
//M20150601 : Remove _select() to bottom-side
|
||||
//WIZCHIP.CS._deselect();
|
||||
}
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_DIR_) )
|
||||
for(i = 0 ; i < len; i++)
|
||||
pBuf[i] = WIZCHIP.IF.BUS._read_byte(AddrSel+i);
|
||||
for(i = 0 ; i < len; i++)
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
// pBuf[i] = WIZCHIP.IF.BUS._read_byte(AddrSel+i);
|
||||
pBuf[i] = WIZCHIP.IF.BUS._read_data(AddrSel+i);
|
||||
#elif ( (_WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_) )
|
||||
WIZCHIP_WRITE(MR, WIZCHIP_READ(MR) | MR_AI);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
for(i = 0 ; i < len; i++)
|
||||
pBuf[i] = WIZCHIP.IF.BUS._read_byte(IDM_DR);
|
||||
WIZCHIP_WRITE(MR, WIZCHIP_READ(MR) & ~MR_AI);
|
||||
//M20150601 : Rename the function for integrating with ioLibrary
|
||||
/*
|
||||
WIZCHIP_WRITE(MR, WIZCHIP_READ(MR) | MR_AI);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_byte(IDM_AR1,(AddrSel & 0x00FF));
|
||||
for(i = 0 ; i < len; i++)
|
||||
pBuf[i] = WIZCHIP.IF.BUS._read_byte(IDM_DR);
|
||||
WIZCHIP_WRITE(MR, WIZCHIP_READ(MR) & ~MR_AI);
|
||||
*/
|
||||
setMR(getMR() | MR_AI);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR0,(AddrSel & 0xFF00) >> 8);
|
||||
WIZCHIP.IF.BUS._write_data(IDM_AR1,(AddrSel & 0x00FF));
|
||||
for(i = 0 ; i < len; i++)
|
||||
pBuf[i] = WIZCHIP.IF.BUS._read_data(IDM_DR);
|
||||
setMR(getMR() & ~MR_AI);
|
||||
|
||||
#else
|
||||
#error "Unknown _WIZCHIP_IO_MODE_ in W5100. !!!!"
|
||||
#endif
|
||||
|
||||
WIZCHIP.CS._deselect(); //M20150601 : Moved Here.
|
||||
WIZCHIP_CRITICAL_EXIT();
|
||||
}
|
||||
|
||||
|
||||
@ -43,7 +43,9 @@
|
||||
#include <stdint.h>
|
||||
#include "wizchip_conf.h"
|
||||
|
||||
/// \cond DOXY_APPLY_CODE
|
||||
#if (_WIZCHIP_ == 5100)
|
||||
/// \endcond
|
||||
|
||||
#define _WIZCHIP_SN_BASE_ (0x0400)
|
||||
#define _WIZCHIP_SN_SIZE_ (0x0100)
|
||||
@ -199,7 +201,7 @@
|
||||
#if _WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_BUS_INDIR_
|
||||
#define MR (_WIZCHIP_IO_BASE_ + (0x0000)) // Mode
|
||||
#else
|
||||
#define MR (_W5500_IO_BASE_ + (0x0000)) // Mode
|
||||
#define MR (_W5100_IO_BASE_ + (0x0000)) // Mode
|
||||
#endif
|
||||
|
||||
/**
|
||||
@ -275,7 +277,7 @@
|
||||
* @ingroup Common_register_group_W5100
|
||||
* @brief Retry count register(R/W)
|
||||
* @details \ref _RCR_ configures the number of time of retransmission.
|
||||
* When retransmission occurs as many as ref _RCR_+1 Timeout interrupt is issued (\ref Sn_IR[TIMEOUT] = '1').
|
||||
* When retransmission occurs as many as ref _RCR_+1 Timeout interrupt is issued (\ref Sn_IR_TIMEOUT = '1').
|
||||
*/
|
||||
#define _RCR_ (_W5100_IO_BASE_ + (0x0019)) // Retry Count
|
||||
#define RMSR (_W5100_IO_BASE_ + (0x001A)) // Receicve Memory Size
|
||||
@ -425,7 +427,7 @@
|
||||
* @ingroup Socket_register_group_W5100
|
||||
* @brief source port register(R/W)
|
||||
* @details \ref Sn_PORT configures the source port number of Socket n.
|
||||
* It is valid when Socket n is used in TCP/UPD mode. It should be set before OPEN command is ordered.
|
||||
* It is valid when Socket n is used in TCP/UDP mode. It should be set before OPEN command is ordered.
|
||||
*/
|
||||
#define Sn_PORT(sn) (_W5100_IO_BASE_ + WIZCHIP_SREG_BLOCK(sn) + (0x0004)) // source port register
|
||||
|
||||
@ -960,7 +962,7 @@
|
||||
* @brief Closing state
|
||||
* @details This indicates Socket n received the disconnect-request (FIN packet) from the connected peer.\n
|
||||
* This is half-closing status, and data can be transferred.\n
|
||||
* For full-closing, DISCON command is used. But For just-closing, CLOSE command is used.
|
||||
* For full-closing, DISCON command is used. But For just-closing, @ref Sn_CR_CLOSE command is used.
|
||||
*/
|
||||
#define SOCK_CLOSE_WAIT 0x1C
|
||||
|
||||
@ -974,23 +976,23 @@
|
||||
/**
|
||||
* @brief UDP socket
|
||||
* @details This indicates Socket n is opened in UDP mode(Sn_MR(P[3:0]) = 010).\n
|
||||
* It changes to SOCK_UPD when Sn_MR(P[3:0]) = 010 and OPEN command is ordered.\n
|
||||
* It changes to SOCK_UDP when Sn_MR(P[3:0]) = 010 and @ref Sn_CR_OPEN command is ordered.\n
|
||||
* Unlike TCP mode, data can be transfered without the connection-process.
|
||||
*/
|
||||
#define SOCK_UDP 0x22 ///< udp socket
|
||||
|
||||
/**
|
||||
* @brief IP raw mode socket
|
||||
* @details TThe socket is opened in IPRAW mode. The SOCKET status is change to SOCK_IPRAW when Sn_MR (P3:P0) is
|
||||
* Sn_MR_IPRAW and OPEN command is used.\n
|
||||
* @brief IP raw mode socket
|
||||
* @details TThe socket is opened in IPRAW mode. The SOCKET status is change to SOCK_IPRAW when @ref Sn_MR (P3:P0) is
|
||||
* Sn_MR_IPRAW and @ref Sn_CR_OPEN command is used.\n
|
||||
* IP Packet can be transferred without a connection similar to the UDP mode.
|
||||
*/
|
||||
#define SOCK_IPRAW 0x32 ///< ip raw mode socket
|
||||
|
||||
/**
|
||||
* @brief MAC raw mode socket
|
||||
* @details This indicates Socket 0 is opened in MACRAW mode (S0_MR(P[3:0]) = 100and is valid only in Socket 0.\n
|
||||
* It changes to SOCK_MACRAW when S0_MR(P[3:0] = 100)and OPEN command is ordered.\n
|
||||
* @details This indicates Socket 0 is opened in MACRAW mode (@ref Sn_MR(P[3:0]) = '100' and n=0) and is valid only in Socket 0.\n
|
||||
* It changes to SOCK_MACRAW when @ref Sn_MR(P[3:0]) = '100' and @ref Sn_CR_OPEN command is ordered.\n
|
||||
* Like UDP mode socket, MACRAW mode Socket 0 can transfer a MAC packet (Ethernet frame) without the connection-process.
|
||||
*/
|
||||
#define SOCK_MACRAW 0x42 ///< mac raw mode socket
|
||||
@ -1051,13 +1053,16 @@ connection.
|
||||
////////////////////////
|
||||
// Basic I/O Function //
|
||||
////////////////////////
|
||||
//
|
||||
//M20150601 : uint16_t AddrSel --> uint32_t AddrSel
|
||||
//
|
||||
/**
|
||||
* @ingroup Basic_IO_function_W5100
|
||||
* @brief It reads 1 byte value from a register.
|
||||
* @param AddrSel Register address
|
||||
* @return The value of register
|
||||
*/
|
||||
uint8_t WIZCHIP_READ (uint16_t AddrSel);
|
||||
uint8_t WIZCHIP_READ (uint32_t AddrSel);
|
||||
|
||||
/**
|
||||
* @ingroup Basic_IO_function_W5100
|
||||
@ -1066,7 +1071,7 @@ uint8_t WIZCHIP_READ (uint16_t AddrSel);
|
||||
* @param wb Write data
|
||||
* @return void
|
||||
*/
|
||||
void WIZCHIP_WRITE(uint16_t AddrSel, uint8_t wb );
|
||||
void WIZCHIP_WRITE(uint32_t AddrSel, uint8_t wb );
|
||||
|
||||
/**
|
||||
* @ingroup Basic_IO_function_W5100
|
||||
@ -1075,7 +1080,7 @@ void WIZCHIP_WRITE(uint16_t AddrSel, uint8_t wb );
|
||||
* @param pBuf Pointer buffer to read data
|
||||
* @param len Data length
|
||||
*/
|
||||
void WIZCHIP_READ_BUF (uint16_t AddrSel, uint8_t* pBuf, uint16_t len);
|
||||
void WIZCHIP_READ_BUF (uint32_t AddrSel, uint8_t* pBuf, uint16_t len);
|
||||
|
||||
/**
|
||||
* @ingroup Basic_IO_function_W5100
|
||||
@ -1084,7 +1089,7 @@ void WIZCHIP_READ_BUF (uint16_t AddrSel, uint8_t* pBuf, uint16_t len);
|
||||
* @param pBuf Pointer buffer to write data
|
||||
* @param len Data length
|
||||
*/
|
||||
void WIZCHIP_WRITE_BUF(uint16_t AddrSel, uint8_t* pBuf, uint16_t len);
|
||||
void WIZCHIP_WRITE_BUF(uint32_t AddrSel, uint8_t* pBuf, uint16_t len);
|
||||
|
||||
|
||||
/////////////////////////////////
|
||||
@ -1727,7 +1732,7 @@ uint16_t getSn_RX_RSR(uint8_t sn);
|
||||
* @brief Set @ref Sn_FRAG register
|
||||
* @param (uint8_t)sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
|
||||
* @param (uint16_t)frag Value to set \ref Sn_FRAG
|
||||
* @sa getSn_FRAD()
|
||||
* @sa getSn_FRAG()
|
||||
*/
|
||||
#define setSn_FRAG(sn, frag) { \
|
||||
WIZCHIP_WRITE(Sn_FRAG(sn), (uint8_t)(frag >>8)); \
|
||||
@ -1809,7 +1814,6 @@ uint32_t getSn_TxBASE(uint8_t sn);
|
||||
* and updates the Tx write pointer register.
|
||||
* This function is being called by send() and sendto() function also.
|
||||
*
|
||||
* @note User should read upper byte first and lower byte later to get proper value.
|
||||
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
|
||||
* @param wizdata Pointer buffer to write data
|
||||
* @param len Data length
|
||||
@ -1826,7 +1830,6 @@ void wiz_send_data(uint8_t sn, uint8_t *wizdata, uint16_t len);
|
||||
* to <i>wizdata(pointer variable)</i> of the length of <i>len(variable)</i> bytes.
|
||||
* This function is being called by recv() also.
|
||||
*
|
||||
* @note User should read upper byte first and lower byte later to get proper value.
|
||||
* @param sn Socket number. It should be <b>0 ~ @ref \_WIZCHIP_SOCK_NUM_</b>.
|
||||
* @param wizdata Pointer buffer to read data
|
||||
* @param len Data length
|
||||
@ -1843,7 +1846,9 @@ void wiz_recv_data(uint8_t sn, uint8_t *wizdata, uint16_t len);
|
||||
*/
|
||||
void wiz_recv_ignore(uint8_t sn, uint16_t len);
|
||||
|
||||
/// @cond DOXY_APPLY_CODE
|
||||
#endif
|
||||
/// @endcond
|
||||
|
||||
#endif //_W5100_H_
|
||||
|
||||
|
||||
Reference in New Issue
Block a user