sensoren 2

DEVICES_BY_ROOM.md

@@ -0,0 +1,41 @@
+Schlafzimmer:
+- Bettlicht Patty                                    | 0x0017880108158b32
+- Bettlicht Wolfgang                                 | 0x00178801081570bf
+- Deckenlampe Schlafzimmer                           | 0x0017880108a406a7
+- Medusa-Lampe Schlafzimmer                          | 0xf0d1b80000154c7c
+
+Esszimmer:
+- Deckenlampe Esszimmer                              | 0x0017880108a03e45
+- Leselampe Esszimmer                                | 0xec1bbdfffe7b84f2
+- Standlampe Esszimmer                               | 0xbc33acfffe21f547
+- kleine Lampe links Esszimmer                       | 0xf0d1b80000153099
+- kleine Lampe rechts Esszimmer                      | 0xf0d1b80000156645
+
+Wohnzimmer:
+- Lampe Naehtischchen Wohnzimmer                     | 0x842e14fffee560ee
+- Lampe Semeniere Wohnzimmer                         | 0xf0d1b8000015480b
+- Sterne Wohnzimmer                                  | 0xf0d1b80000155fc2
+- grosse Lampe Wohnzimmer                            | 0xf0d1b80000151aca
+
+Küche:
+- Küche Deckenlampe                                  | 0x001788010d2c40c4
+- Kueche                                             | 0x94deb8fffe2e5c06
+
+Arbeitszimmer Patty:
+- Leselampe Patty                                    | 0x001788010600ec9d
+- Schranklicht hinten Patty                          | 0x0017880106e29571
+- Schranklicht vorne Patty                           | 0xf0d1b80000154cf5
+
+Arbeitszimmer Wolfgang:
+- Wolfgang                                           | 0x540f57fffe7e3cfe
+- ExperimentLabTest                                  | 0xf0d1b80000195038
+
+Flur:
+- Deckenlampe Flur oben                              | 0x001788010d2123a7
+- Haustür                                            | 0xec1bbdfffea6a3da
+- Licht Flur oben am Spiegel                         | 0x842e14fffefe4ba4
+
+Sportzimmer:
+- Sportlicht Regal                                   | 0xf0d1b8be2409f569
+- Sportlicht Tisch                                   | 0xf0d1b8be2409f31b
+- Sportlicht am Fernseher, Studierzimmer             | 0x842e14fffe76a23a

MAX_INTEGRATION.md

@@ -0,0 +1,223 @@
+# MAX! (eQ-3) Thermostat Integration
+
+## Overview
+
+This document describes the integration of MAX! (eQ-3) thermostats via Homegear into the home automation system.
+
+## Protocol Characteristics
+
+MAX! thermostats use a **simple integer-based protocol** (not JSON):
+
+- **SET messages**: Plain integer temperature value (e.g., `22`)
+- **STATE messages**: Plain integer temperature value (e.g., `22`)
+- **Topics**: Homegear MQTT format
+
+### MQTT Topics
+
+**SET Command:**
+```
+homegear/instance1/set/<peerId>/<channel>/SET_TEMPERATURE
+Payload: "22" (plain integer as string)
+```
+
+**STATE Update:**
+```
+homegear/instance1/plain/<peerId>/<channel>/SET_TEMPERATURE
+Payload: "22" (plain integer as string)
+```
+
+## Transformation Layer
+
+The abstraction layer provides automatic transformation between the abstract home protocol and MAX! format.
+
+### Abstract → MAX! (SET)
+
+**Input (Abstract):**
+```json
+{
+  "mode": "heat",
+  "target": 22.5
+}
+```
+
+**Output (MAX!):**
+```
+22
+```
+
+**Transformation Rules:**
+- Extract `target` temperature
+- Convert float → integer (round to nearest)
+- Return as plain string (no JSON)
+- Ignore `mode` field (MAX! always in heating mode)
+
+### MAX! → Abstract (STATE)
+
+**Input (MAX!):**
+```
+22
+```
+
+**Output (Abstract):**
+```json
+{
+  "target": 22.0,
+  "mode": "heat"
+}
+```
+
+**Transformation Rules:**
+- Parse plain string/integer value
+- Convert to float
+- Add default `mode: "heat"` (MAX! always heating)
+- Wrap in abstract payload structure
+
+## Device Configuration
+
+### Example devices.yaml Entry
+
+```yaml
+- device_id: "thermostat_wolfgang"
+  type: "thermostat"
+  cap_version: "thermostat@1.0.0"
+  technology: "max"
+  features:
+    mode: true
+    target: true
+    current: false  # SET_TEMPERATURE doesn't report current temp
+  topics:
+    set: "homegear/instance1/set/39/1/SET_TEMPERATURE"
+    state: "homegear/instance1/plain/39/1/SET_TEMPERATURE"
+  metadata:
+    friendly_name: "Thermostat Wolfgang"
+    location: "Arbeitszimmer Wolfgang"
+    vendor: "eQ-3"
+    model: "MAX! Thermostat"
+    peer_id: "39"
+    channel: "1"
+```
+
+### Configuration Notes
+
+1. **technology**: Must be set to `"max"` to activate MAX! transformations
+2. **topics.set**: Use Homegear's `/set/` path with `/SET_TEMPERATURE` parameter
+3. **topics.state**: Use Homegear's `/plain/` path with `/SET_TEMPERATURE` parameter
+4. **features.current**: Set to `false` - SET_TEMPERATURE topic doesn't provide current temperature
+5. **metadata**: Include `peer_id` and `channel` for reference
+
+## Temperature Rounding
+
+MAX! only supports **integer temperatures**. The system uses standard rounding:
+
+| Abstract Input | MAX! Output |
+|----------------|-------------|
+| 20.4°C         | 20          |
+| 20.5°C         | 20          |
+| 20.6°C         | 21          |
+| 21.5°C         | 22          |
+| 22.5°C         | 22          |
+
+Python's `round()` function uses "banker's rounding" (round half to even).
+
+## Limitations
+
+1. **No current temperature**: SET_TEMPERATURE topic only reports target, not actual temperature
+2. **No mode control**: MAX! thermostats are always in heating mode
+3. **Integer only**: Temperature precision limited to 1°C steps
+4. **No battery status**: Not available via SET_TEMPERATURE topic
+5. **No window detection**: Not available via SET_TEMPERATURE topic
+
+## Testing
+
+Test the transformation functions:
+
+```bash
+poetry run python /tmp/test_max_transform.py
+```
+
+Expected output:
+```
+✅ PASS: Float 22.5 -> Integer string
+✅ PASS: Integer string -> Abstract dict
+✅ PASS: Integer -> Abstract dict
+✅ PASS: Rounding works correctly
+🎉 All MAX! transformation tests passed!
+```
+
+## Implementation Details
+
+### Files Modified
+
+1. **apps/abstraction/transformation.py**
+   - Added `_transform_thermostat_max_to_vendor()` - converts abstract → plain integer
+   - Added `_transform_thermostat_max_to_abstract()` - converts plain integer → abstract
+   - Registered handlers in `TRANSFORM_HANDLERS` registry
+
+2. **apps/abstraction/main.py**
+   - Modified `handle_abstract_set()` to send plain string for MAX! devices (not JSON)
+   - Modified message processing to handle plain text payloads from MAX! STATE topics
+
+### Transformation Functions
+
+```python
+def _transform_thermostat_max_to_vendor(payload: dict[str, Any]) -> str:
+    """Convert {"target": 22.5} → "22" """
+    target_temp = payload.get("target", 21.0)
+    return str(int(round(target_temp)))
+
+def _transform_thermostat_max_to_abstract(payload: str | int | float) -> dict[str, Any]:
+    """Convert "22" → {"target": 22.0, "mode": "heat"} """
+    target_temp = float(payload)
+    return {"target": target_temp, "mode": "heat"}
+```
+
+## Usage Example
+
+### Setting Temperature via API
+
+```bash
+curl -X POST http://localhost:8001/devices/thermostat_wolfgang/set \
+  -H "Content-Type: application/json" \
+  -d '{
+    "type": "thermostat",
+    "payload": {
+      "mode": "heat",
+      "target": 22.5
+    }
+  }'
+```
+
+**Flow:**
+1. API receives abstract payload: `{"mode": "heat", "target": 22.5}`
+2. Abstraction transforms to MAX!: `"22"`
+3. Publishes to: `homegear/instance1/set/39/1/SET_TEMPERATURE` with payload `22`
+
+### Receiving State Updates
+
+**Homegear publishes:**
+```
+Topic: homegear/instance1/plain/39/1/SET_TEMPERATURE
+Payload: 22
+```
+
+**Flow:**
+1. Abstraction receives plain text: `"22"`
+2. Transforms to abstract: `{"target": 22.0, "mode": "heat"}`
+3. Publishes to: `home/thermostat/thermostat_wolfgang/state`
+4. Publishes to Redis: `ui:updates` channel for real-time UI updates
+
+## Future Enhancements
+
+Potential improvements for better MAX! integration:
+
+1. **Current Temperature**: Subscribe to separate Homegear topic for actual temperature
+2. **Battery Status**: Subscribe to LOWBAT or battery level topics
+3. **Valve Position**: Monitor actual valve opening percentage
+4. **Window Detection**: Subscribe to window open detection status
+5. **Mode Control**: Support comfort/eco temperature presets
+
+## Related Documentation
+
+- [Homegear MAX! Documentation](https://doc.homegear.eu/data/homegear-max/)
+- [Abstract Protocol Specification](docs/PROTOCOL.md)
+- [Transformation Layer Design](apps/abstraction/README.md)

ZIGBEE_DEVICES_UNSUPPORTED.md

@@ -0,0 +1,54 @@
+# Nicht berücksichtigte Zigbee-Geräte
+
+## Switches (0)
+~~Gerät "Sterne Wohnzimmer" wurde als Light zu devices.yaml hinzugefügt~~
+
+## Sensoren und andere Geräte (22)
+
+### Tür-/Fenstersensoren (7)
+- Wolfgang (MCCGQ11LM) - 0x00158d008b3328da
+- Terassentür (MCCGQ11LM) - 0x00158d008b332788
+- Garten Kueche (MCCGQ11LM) - 0x00158d008b332785
+- Strasse rechts Kueche (MCCGQ11LM) - 0x00158d008b151803
+- Strasse links Kueche (MCCGQ11LM) - 0x00158d008b331d0b
+- Fenster Bad oben (MCCGQ11LM) - 0x00158d008b333aec
+- Fenster Patty Strasse (MCCGQ11LM) - 0x00158d000af457cf
+
+### Temperatur-/Feuchtigkeitssensoren (11)
+- Kueche (WSDCGQ11LM) - 0x00158d00083299bb
+- Wolfgang (WSDCGQ11LM) - 0x00158d000543fb99
+- Patty (WSDCGQ11LM) - 0x00158d0003f052b7
+- Schlafzimmer (WSDCGQ01LM) - 0x00158d00043292dc
+- Bad oben (WSDCGQ11LM) - 0x00158d00093e8987
+- Flur (WSDCGQ11LM) - 0x00158d000836ccc6
+- Wohnzimmer (WSDCGQ11LM) - 0x00158d0008975707
+- Bad unten (WSDCGQ11LM) - 0x00158d00093e662a
+- Waschkueche (WSDCGQ11LM) - 0x00158d000449f3bc
+- Studierzimmer (WSDCGQ11LM) - 0x00158d0009421422
+- Wolfgang (SONOFF SNZB-02D) - 0x0ceff6fffe39a196
+
+### Schalter (2)
+- Schalter Schlafzimmer (Philips 929003017102) - 0x001788010cc490d4
+- Schalter Bettlicht Patty (WXKG11LM) - 0x00158d000805d165
+
+### Bewegungsmelder (1)
+- Bewegungsmelder 8 (Philips 9290012607) - 0x001788010867d420
+
+### Wasserleck-Sensor (1)
+- unter Therme (SJCGQ11LM) - 0x00158d008b3a83a9
+
+## Zusammenfassung
+
+**Unterstützt in devices.yaml:**
+- 24 Lampen (lights)
+- 2 Thermostate
+
+**Nicht unterstützt:**
+- 0 Switches
+- 7 Tür-/Fenstersensoren
+- 11 Temperatur-/Feuchtigkeitssensoren
+- 2 Schalter (Button-Devices)
+- 1 Bewegungsmelder
+- 1 Wasserleck-Sensor
+
+Die nicht unterstützten Geräte könnten in Zukunft durch Erweiterung des Systems integriert werden.

apps/abstraction/main.py

@@ -15,7 +15,7 @@ import uuid
 from aiomqtt import Client
 from pydantic import ValidationError
 
-from packages.home_capabilities import LightState, ThermostatState
+from packages.home_capabilities import LightState, ThermostatState, ContactState, TempHumidityState
 from apps.abstraction.transformation import (
     transform_abstract_to_vendor,
     transform_vendor_to_abstract
@@ -89,12 +89,13 @@ def validate_devices(devices: list[dict[str, Any]]) -> None:
         if "topics" not in device:
             raise ValueError(f"Device {device_id} missing 'topics'")
         
-        if "set" not in device["topics"]:
+        # 'state' topic is required for all devices
-            raise ValueError(f"Device {device_id} missing 'topics.set'")
-        
         if "state" not in device["topics"]:
             raise ValueError(f"Device {device_id} missing 'topics.state'")
         
+        # 'set' topic is optional (read-only devices like contact sensors don't have it)
+        # No validation needed for topics.set
+    
     # Log loaded devices
     device_ids = [d["device_id"] for d in devices]
     logger.info(f"Loaded {len(devices)} device(s): {', '.join(device_ids)}")
@@ -166,6 +167,10 @@ async def handle_abstract_set(
             
             # Validate against ThermostatState (current/battery/window_open are optional)
             ThermostatState.model_validate(abstract_payload)
+        elif device_type in {"contact", "contact_sensor"}:
+            # Contact sensors are read-only - SET commands should not occur
+            logger.warning(f"Contact sensor {device_id} received SET command - ignoring (read-only device)")
+            return
     except ValidationError as e:
         logger.error(f"Validation failed for {device_type} SET {device_id}: {e}")
         return
@@ -173,6 +178,11 @@ async def handle_abstract_set(
     # Transform abstract payload to vendor-specific format
     vendor_payload = transform_abstract_to_vendor(device_type, device_technology, abstract_payload)
     
+    # For MAX! thermostats, vendor_payload is a plain string (integer temperature)
+    # For other devices, it's a dict that needs JSON encoding
+    if device_technology == "max" and device_type == "thermostat":
+        vendor_message = vendor_payload  # Already a string
+    else:
         vendor_message = json.dumps(vendor_payload)
     
     logger.info(f"→ vendor SET {device_id}: {vendor_topic} ← {vendor_message}")
@@ -209,12 +219,22 @@ async def handle_vendor_state(
         elif device_type == "thermostat":
             # Validate thermostat state: mode, target, current (required), battery, window_open
             ThermostatState.model_validate(abstract_payload)
+        elif device_type in {"contact", "contact_sensor"}:
+            # Validate contact sensor state
+            ContactState.model_validate(abstract_payload)
+        elif device_type in {"temp_humidity", "temp_humidity_sensor"}:
+            # Validate temperature & humidity sensor state
+            TempHumidityState.model_validate(abstract_payload)
     except ValidationError as e:
         logger.error(f"Validation failed for {device_type} STATE {device_id}: {e}")
         return
     
+    # Normalize device type for topic (use 'contact' for both 'contact' and 'contact_sensor')
+    topic_type = "contact" if device_type in {"contact", "contact_sensor"} else device_type
+    topic_type = "temp_humidity" if device_type in {"temp_humidity", "temp_humidity_sensor"} else topic_type
+    
     # Publish to abstract state topic (retained)
-    abstract_topic = f"home/{device_type}/{device_id}/state"
+    abstract_topic = f"home/{topic_type}/{device_id}/state"
     abstract_message = json.dumps(abstract_payload)
     
     logger.info(f"← abstract STATE {device_id}: {abstract_topic} → {abstract_message}")
@@ -268,15 +288,22 @@ async def mqtt_worker(config: dict[str, Any], redis_client: aioredis.Redis) -> N
                 keepalive=keepalive,
                 timeout=10.0  # Add explicit timeout for operations
             ) as client:
-                logger.info(f"Connected to MQTT broker as {client_id}")
+                logger.info(f"Connected to MQTT broker as {unique_client_id}")
                 
-                # Subscribe to abstract SET topics for all devices
+                # Subscribe to topics for all devices
                 for device in devices.values():
-                    abstract_set_topic = f"home/{device['type']}/{device['device_id']}/set"
+                    device_id = device['device_id']
+                    device_type = device['type']
+                    
+                    # Subscribe to abstract SET topic only if device has a SET topic (not read-only)
+                    if "set" in device["topics"]:
+                        abstract_set_topic = f"home/{device_type}/{device_id}/set"
                         await client.subscribe(abstract_set_topic)
                         logger.info(f"Subscribed to abstract SET: {abstract_set_topic}")
+                    else:
+                        logger.info(f"Skipping SET subscription for read-only device: {device_id}")
                     
-                    # Subscribe to vendor STATE topics
+                    # Subscribe to vendor STATE topics (all devices have state)
                     vendor_state_topic = device["topics"]["state"]
                     await client.subscribe(vendor_state_topic)
                     logger.info(f"Subscribed to vendor STATE: {vendor_state_topic}")
@@ -294,6 +321,25 @@ async def mqtt_worker(config: dict[str, Any], redis_client: aioredis.Redis) -> N
                     topic = str(message.topic)
                     payload_str = message.payload.decode()
                     
+                    # Determine if message is from a MAX! device (requires plain text handling)
+                    is_max_device = False
+                    max_device_id = None
+                    max_device_type = None
+                    
+                    # Check if topic matches any MAX! device state topic
+                    for device_id, device in devices.items():
+                        if device.get("technology") == "max" and topic == device["topics"]["state"]:
+                            is_max_device = True
+                            max_device_id = device_id
+                            max_device_type = device["type"]
+                            break
+                    
+                    # Parse payload based on device technology
+                    if is_max_device:
+                        # MAX! sends plain integer/string, not JSON
+                        payload = payload_str.strip()
+                    else:
+                        # All other technologies use JSON
                         try:
                             payload = json.loads(payload_str)
                         except json.JSONDecodeError:
@@ -318,7 +364,16 @@ async def mqtt_worker(config: dict[str, Any], redis_client: aioredis.Redis) -> N
                     
                     # Check if this is a vendor STATE message
                     else:
-                        # Find device by vendor state topic
+                        # For MAX! devices, we already identified them above
+                        if is_max_device:
+                            device = devices[max_device_id]
+                            device_technology = device.get("technology", "unknown")
+                            await handle_vendor_state(
+                                client, redis_client, max_device_id, max_device_type, 
+                                device_technology, payload, redis_channel
+                            )
+                        else:
+                            # Find device by vendor state topic for other technologies
                             for device_id, device in devices.items():
                                 if topic == device["topics"]["state"]:
                                     device_technology = device.get("technology", "unknown")

apps/abstraction/transformation.py

@@ -111,19 +111,275 @@ def _transform_light_zigbee2mqtt_to_abstract(payload: dict[str, Any]) -> dict[st
 def _transform_thermostat_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> dict[str, Any]:
     """Transform abstract thermostat payload to zigbee2mqtt format.
     
-    zigbee2mqtt uses same format as abstract protocol (no transformation needed).
+    Transformations:
+    - target -> current_heating_setpoint (as string)
+    - mode is ignored (zigbee2mqtt thermostats use system_mode in state only)
+    
+    Example:
+    - Abstract: {'target': 22.0}
+    - zigbee2mqtt: {'current_heating_setpoint': '22.0'}
     """
-    return payload
+    vendor_payload = {}
+    
+    if "target" in payload:
+        # zigbee2mqtt expects current_heating_setpoint as string
+        vendor_payload["current_heating_setpoint"] = str(payload["target"])
+    
+    return vendor_payload
 
 
 def _transform_thermostat_zigbee2mqtt_to_abstract(payload: dict[str, Any]) -> dict[str, Any]:
     """Transform zigbee2mqtt thermostat payload to abstract format.
     
-    zigbee2mqtt uses same format as abstract protocol (no transformation needed).
+    Transformations:
+    - current_heating_setpoint -> target (as float)
+    - local_temperature -> current (as float)
+    - system_mode -> mode
+    
+    Example:
+    - zigbee2mqtt: {'current_heating_setpoint': 15, 'local_temperature': 23, 'system_mode': 'heat'}
+    - Abstract: {'target': 15.0, 'current': 23.0, 'mode': 'heat'}
+    """
+    abstract_payload = {}
+    
+    # Extract target temperature
+    if "current_heating_setpoint" in payload:
+        setpoint = payload["current_heating_setpoint"]
+        abstract_payload["target"] = float(setpoint)
+    
+    # Extract current temperature
+    if "local_temperature" in payload:
+        current = payload["local_temperature"]
+        abstract_payload["current"] = float(current)
+    
+    # Extract mode
+    if "system_mode" in payload:
+        abstract_payload["mode"] = payload["system_mode"]
+    
+    return abstract_payload
+
+
+# ============================================================================
+# HANDLER FUNCTIONS: contact_sensor - zigbee2mqtt technology
+# ============================================================================
+
+def _transform_contact_sensor_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> dict[str, Any]:
+    """Transform abstract contact sensor payload to zigbee2mqtt format.
+    
+    Contact sensors are read-only, so this should not be called for SET commands.
+    Returns payload as-is for compatibility.
+    """
+    logger.warning("Contact sensors are read-only - SET commands should not be used")
+    return payload
+
+
+def _transform_contact_sensor_zigbee2mqtt_to_abstract(payload: dict[str, Any]) -> dict[str, Any]:
+    """Transform zigbee2mqtt contact sensor payload to abstract format.
+    
+    Transformations:
+    - contact: bool -> "open" | "closed"
+      - zigbee2mqtt semantics: False = OPEN, True = CLOSED (inverted!)
+    - battery: pass through (already 0-100)
+    - linkquality: pass through
+    - device_temperature: pass through (if present)
+    - voltage: pass through (if present)
+    
+    Example:
+    - zigbee2mqtt: {"contact": false, "battery": 100, "linkquality": 87}
+    - Abstract: {"contact": "open", "battery": 100, "linkquality": 87}
+    """
+    abstract_payload = {}
+    
+    # Transform contact state (inverted logic!)
+    if "contact" in payload:
+        contact_bool = payload["contact"]
+        # zigbee2mqtt: False = OPEN, True = CLOSED
+        abstract_payload["contact"] = "closed" if contact_bool else "open"
+    
+    # Pass through optional fields
+    if "battery" in payload:
+        abstract_payload["battery"] = payload["battery"]
+    
+    if "linkquality" in payload:
+        abstract_payload["linkquality"] = payload["linkquality"]
+    
+    if "device_temperature" in payload:
+        abstract_payload["device_temperature"] = payload["device_temperature"]
+    
+    if "voltage" in payload:
+        abstract_payload["voltage"] = payload["voltage"]
+    
+    return abstract_payload
+
+
+# ============================================================================
+# HANDLER FUNCTIONS: contact_sensor - max technology (Homegear MAX!)
+# ============================================================================
+
+def _transform_contact_sensor_max_to_vendor(payload: dict[str, Any]) -> dict[str, Any]:
+    """Transform abstract contact sensor payload to MAX! format.
+    
+    Contact sensors are read-only, so this should not be called for SET commands.
+    Returns payload as-is for compatibility.
+    """
+    logger.warning("Contact sensors are read-only - SET commands should not be used")
+    return payload
+
+
+def _transform_contact_sensor_max_to_abstract(payload: str | bool | dict[str, Any]) -> dict[str, Any]:
+    """Transform MAX! (Homegear) contact sensor payload to abstract format.
+    
+    MAX! sends "true"/"false" (string or bool) on STATE topic.
+    
+    Transformations:
+    - "true" or True -> "open" (window/door open)
+    - "false" or False -> "closed" (window/door closed)
+    
+    Example:
+    - MAX!: "true" or True
+    - Abstract: {"contact": "open"}
+    """
+    try:
+        # Handle string, bool, or dict input
+        if isinstance(payload, dict):
+            # If already a dict, extract contact field
+            contact_value = payload.get("contact", False)
+        elif isinstance(payload, str):
+            # Parse string to bool
+            contact_value = payload.strip().lower() == "true"
+        elif isinstance(payload, bool):
+            # Use bool directly
+            contact_value = payload
+        else:
+            logger.warning(f"MAX! contact sensor unexpected payload type: {type(payload)}, value: {payload}")
+            contact_value = False
+        
+        # MAX! semantics: True = OPEN, False = CLOSED
+        return {
+            "contact": "open" if contact_value else "closed"
+        }
+    except (ValueError, TypeError) as e:
+        logger.error(f"MAX! contact sensor failed to parse: {payload}, error: {e}")
+        return {
+            "contact": "closed"  # Default to closed on error
+        }
+
+
+# ============================================================================
+# HANDLER FUNCTIONS: temp_humidity_sensor - zigbee2mqtt technology
+# ============================================================================
+
+def _transform_temp_humidity_sensor_zigbee2mqtt_to_vendor(payload: dict[str, Any]) -> dict[str, Any]:
+    """Transform abstract temp/humidity sensor payload to zigbee2mqtt format.
+    
+    Temp/humidity sensors are read-only, so this should not be called for SET commands.
+    Returns payload as-is for compatibility.
     """
     return payload
 
 
+def _transform_temp_humidity_sensor_zigbee2mqtt_to_abstract(payload: dict[str, Any]) -> dict[str, Any]:
+    """Transform zigbee2mqtt temp/humidity sensor payload to abstract format.
+    
+    Passthrough - zigbee2mqtt provides temperature, humidity, battery, linkquality directly.
+    """
+    return payload
+
+
+# ============================================================================
+# HANDLER FUNCTIONS: temp_humidity_sensor - MAX! technology
+# ============================================================================
+
+def _transform_temp_humidity_sensor_max_to_vendor(payload: dict[str, Any]) -> dict[str, Any]:
+    """Transform abstract temp/humidity sensor payload to MAX! format.
+    
+    Temp/humidity sensors are read-only, so this should not be called for SET commands.
+    Returns payload as-is for compatibility.
+    """
+    return payload
+
+
+def _transform_temp_humidity_sensor_max_to_abstract(payload: dict[str, Any]) -> dict[str, Any]:
+    """Transform MAX! temp/humidity sensor payload to abstract format.
+    
+    Passthrough - MAX! provides temperature, humidity, battery directly.
+    """
+    return payload
+
+
+# ============================================================================
+# HANDLER FUNCTIONS: max technology (Homegear MAX!)
+# ============================================================================
+
+def _transform_thermostat_max_to_vendor(payload: dict[str, Any]) -> str:
+    """Transform abstract thermostat payload to MAX! (Homegear) format.
+    
+    MAX! expects only the integer temperature value (no JSON).
+    
+    Transformations:
+    - Extract 'target' temperature from payload
+    - Convert float to integer (MAX! only accepts integers)
+    - Return as plain string value
+    
+    Example:
+    - Abstract: {'mode': 'heat', 'target': 22.5}
+    - MAX!: "22"
+    
+    Note: MAX! ignores mode - it's always in heating mode
+    """
+    if "target" not in payload:
+        logger.warning(f"MAX! thermostat payload missing 'target': {payload}")
+        return "21"  # Default fallback
+    
+    target_temp = payload["target"]
+    
+    # Convert to integer (MAX! protocol requirement)
+    if isinstance(target_temp, (int, float)):
+        int_temp = int(round(target_temp))
+        return str(int_temp)
+    
+    logger.warning(f"MAX! invalid target temperature type: {type(target_temp)}, value: {target_temp}")
+    return "21"
+
+
+def _transform_thermostat_max_to_abstract(payload: str | int | float) -> dict[str, Any]:
+    """Transform MAX! (Homegear) thermostat payload to abstract format.
+    
+    MAX! sends only the integer temperature value (no JSON).
+    
+    Transformations:
+    - Parse plain string/int value
+    - Convert to float for abstract protocol
+    - Wrap in abstract payload structure with mode='heat'
+    
+    Example:
+    - MAX!: "22" or 22
+    - Abstract: {'target': 22.0, 'mode': 'heat'}
+    
+    Note: MAX! doesn't send current temperature via SET_TEMPERATURE topic
+    """
+    try:
+        # Handle both string and numeric input
+        if isinstance(payload, str):
+            target_temp = float(payload.strip())
+        elif isinstance(payload, (int, float)):
+            target_temp = float(payload)
+        else:
+            logger.warning(f"MAX! unexpected payload type: {type(payload)}, value: {payload}")
+            target_temp = 21.0
+        
+        return {
+            "target": target_temp,
+            "mode": "heat"  # MAX! is always in heating mode
+        }
+    except (ValueError, TypeError) as e:
+        logger.error(f"MAX! failed to parse temperature: {payload}, error: {e}")
+        return {
+            "target": 21.0,
+            "mode": "heat"
+        }
+
+
 # ============================================================================
 # REGISTRY: Maps (device_type, technology, direction) -> handler function
 # ============================================================================
@@ -142,6 +398,28 @@ TRANSFORM_HANDLERS: dict[tuple[str, str, str], TransformHandler] = {
     ("thermostat", "simulator", "to_abstract"): _transform_thermostat_simulator_to_abstract,
     ("thermostat", "zigbee2mqtt", "to_vendor"): _transform_thermostat_zigbee2mqtt_to_vendor,
     ("thermostat", "zigbee2mqtt", "to_abstract"): _transform_thermostat_zigbee2mqtt_to_abstract,
+    ("thermostat", "max", "to_vendor"): _transform_thermostat_max_to_vendor,
+    ("thermostat", "max", "to_abstract"): _transform_thermostat_max_to_abstract,
+    
+    # Contact sensor transformations (support both 'contact' and 'contact_sensor' types)
+    ("contact_sensor", "zigbee2mqtt", "to_vendor"): _transform_contact_sensor_zigbee2mqtt_to_vendor,
+    ("contact_sensor", "zigbee2mqtt", "to_abstract"): _transform_contact_sensor_zigbee2mqtt_to_abstract,
+    ("contact_sensor", "max", "to_vendor"): _transform_contact_sensor_max_to_vendor,
+    ("contact_sensor", "max", "to_abstract"): _transform_contact_sensor_max_to_abstract,
+    ("contact", "zigbee2mqtt", "to_vendor"): _transform_contact_sensor_zigbee2mqtt_to_vendor,
+    ("contact", "zigbee2mqtt", "to_abstract"): _transform_contact_sensor_zigbee2mqtt_to_abstract,
+    ("contact", "max", "to_vendor"): _transform_contact_sensor_max_to_vendor,
+    ("contact", "max", "to_abstract"): _transform_contact_sensor_max_to_abstract,
+    
+    # Temperature & humidity sensor transformations (support both type aliases)
+    ("temp_humidity_sensor", "zigbee2mqtt", "to_vendor"): _transform_temp_humidity_sensor_zigbee2mqtt_to_vendor,
+    ("temp_humidity_sensor", "zigbee2mqtt", "to_abstract"): _transform_temp_humidity_sensor_zigbee2mqtt_to_abstract,
+    ("temp_humidity_sensor", "max", "to_vendor"): _transform_temp_humidity_sensor_max_to_vendor,
+    ("temp_humidity_sensor", "max", "to_abstract"): _transform_temp_humidity_sensor_max_to_abstract,
+    ("temp_humidity", "zigbee2mqtt", "to_vendor"): _transform_temp_humidity_sensor_zigbee2mqtt_to_vendor,
+    ("temp_humidity", "zigbee2mqtt", "to_abstract"): _transform_temp_humidity_sensor_zigbee2mqtt_to_abstract,
+    ("temp_humidity", "max", "to_vendor"): _transform_temp_humidity_sensor_max_to_vendor,
+    ("temp_humidity", "max", "to_abstract"): _transform_temp_humidity_sensor_max_to_abstract,
 }
 
 

apps/api/main.py

@@ -15,7 +15,16 @@ from fastapi.middleware.cors import CORSMiddleware
 from fastapi.responses import StreamingResponse
 from pydantic import BaseModel, ValidationError
 
-from packages.home_capabilities import LIGHT_VERSION, THERMOSTAT_VERSION, LightState, ThermostatState
+from packages.home_capabilities import (
+    LIGHT_VERSION,
+    THERMOSTAT_VERSION,
+    CONTACT_SENSOR_VERSION,
+    TEMP_HUMIDITY_SENSOR_VERSION,
+    LightState,
+    ThermostatState,
+    ContactState,
+    TempHumidityState
+)
 
 logger = logging.getLogger(__name__)
 
@@ -137,7 +146,9 @@ async def spec() -> dict[str, dict[str, str]]:
     return {
         "capabilities": {
             "light": LIGHT_VERSION,
-            "thermostat": THERMOSTAT_VERSION
+            "thermostat": THERMOSTAT_VERSION,
+            "contact": CONTACT_SENSOR_VERSION,
+            "temp_humidity": TEMP_HUMIDITY_SENSOR_VERSION
         }
     }
 
@@ -331,6 +342,13 @@ async def set_device(device_id: str, request: SetDeviceRequest) -> dict[str, str
             detail=f"Device {device_id} not found"
         )
     
+    # Check if device is read-only (contact sensors, etc.)
+    if "topics" in device and "set" not in device["topics"]:
+        raise HTTPException(
+            status_code=status.HTTP_405_METHOD_NOT_ALLOWED,
+            detail="Device is read-only"
+        )
+    
     # Validate payload based on device type
     if request.type == "light":
         try:
@@ -356,6 +374,18 @@ async def set_device(device_id: str, request: SetDeviceRequest) -> dict[str, str
                 status_code=status.HTTP_422_UNPROCESSABLE_ENTITY,
                 detail=f"Invalid payload for thermostat: {e}"
             )
+    elif request.type in {"contact", "contact_sensor"}:
+        # Contact sensors are read-only
+        raise HTTPException(
+            status_code=status.HTTP_405_METHOD_NOT_ALLOWED,
+            detail="Contact sensors are read-only devices"
+        )
+    elif request.type in {"temp_humidity", "temp_humidity_sensor"}:
+        # Temperature & humidity sensors are read-only
+        raise HTTPException(
+            status_code=status.HTTP_405_METHOD_NOT_ALLOWED,
+            detail="Temperature & humidity sensors are read-only devices"
+        )
     else:
         raise HTTPException(
             status_code=status.HTTP_422_UNPROCESSABLE_ENTITY,

apps/ui/templates/dashboard.html

@@ -358,27 +358,6 @@
             color: #999;
         }
         
-        .mode-display {
-            background: #f8f9fa;
-            border-radius: 8px;
-            padding: 0.75rem;
-            text-align: center;
-            margin-bottom: 1rem;
-        }
-        
-        .mode-label {
-            font-size: 0.75rem;
-            color: #666;
-            text-transform: uppercase;
-        }
-        
-        .mode-value {
-            font-size: 1rem;
-            font-weight: 600;
-            color: #667eea;
-            text-transform: uppercase;
-        }
-        
         .temp-controls {
             display: flex;
             gap: 0.5rem;
@@ -407,39 +386,96 @@
             transform: scale(0.95);
         }
         
-        .mode-controls {
+        /* Contact Sensor Styles */
-            display: grid;
+        .contact-status {
-            grid-template-columns: repeat(3, 1fr);
+            display: flex;
-            gap: 0.5rem;
+            align-items: center;
-        }
+            gap: 0.75rem;
-        
+            padding: 1rem;
-        .mode-button {
+            background: #f8f9fa;
-            padding: 0.75rem;
-            border: 2px solid #ddd;
             border-radius: 8px;
-            font-size: 0.875rem;
+            margin: 1rem 0;
+        }
+        
+        .contact-badge {
+            padding: 0.5rem 1rem;
+            border-radius: 6px;
             font-weight: 600;
-            cursor: pointer;
+            font-size: 0.875rem;
-            transition: all 0.2s;
-            background: white;
-            color: #666;
-            min-height: 44px;
             text-transform: uppercase;
+            letter-spacing: 0.5px;
         }
         
-        .mode-button:hover {
+        .contact-badge.open {
-            border-color: #667eea;
+            background: #dc3545;
-            color: #667eea;
-        }
-        
-        .mode-button.active {
-            background: #667eea;
-            border-color: #667eea;
             color: white;
         }
         
-        .mode-button:active {
+        .contact-badge.closed {
-            transform: scale(0.95);
+            background: #28a745;
+            color: white;
+        }
+        
+        .contact-info {
+            font-size: 0.75rem;
+            color: #999;
+            margin-top: 1rem;
+            padding: 0.5rem;
+            background: #f8f9fa;
+            border-radius: 4px;
+            text-align: center;
+        }
+        
+        /* Temperature & Humidity Sensor Styles */
+        .temp-humidity-display {
+            padding: 1rem;
+            background: linear-gradient(135deg, #667eea 0%, #764ba2 100%);
+            border-radius: 12px;
+            color: white;
+            margin: 1rem 0;
+        }
+        
+        .temp-humidity-row {
+            display: flex;
+            justify-content: space-between;
+            align-items: center;
+            padding: 0.75rem 0;
+        }
+        
+        .temp-humidity-row:not(:last-child) {
+            border-bottom: 1px solid rgba(255, 255, 255, 0.2);
+        }
+        
+        .temp-humidity-label {
+            font-size: 0.875rem;
+            font-weight: 500;
+            opacity: 0.9;
+        }
+        
+        .temp-humidity-value {
+            font-size: 1.5rem;
+            font-weight: 700;
+            letter-spacing: -0.5px;
+        }
+        
+        .temp-humidity-battery {
+            font-size: 0.75rem;
+            color: rgba(255, 255, 255, 0.8);
+            text-align: center;
+            padding: 0.5rem;
+            margin-top: 0.5rem;
+            background: rgba(0, 0, 0, 0.1);
+            border-radius: 6px;
+        }
+        
+        .temp-humidity-info {
+            font-size: 0.75rem;
+            color: #999;
+            margin-top: 1rem;
+            padding: 0.5rem;
+            background: #f8f9fa;
+            border-radius: 4px;
+            text-align: center;
         }
         
         .events {
@@ -512,7 +548,7 @@
                     <span class="refresh-icon" id="refresh-icon">↻</span>
                 </button>
                 <button class="collapse-all-btn" onclick="toggleAllRooms()" title="Alle Räume ein-/ausklappen">
-                    <span class="collapse-all-icon" id="collapse-all-icon">▼</span>
+                    <span class="collapse-all-icon collapsed" id="collapse-all-icon">▼</span>
                 </button>
             </div>
         </header>
@@ -522,10 +558,10 @@
             <section class="room">
                 <div class="room-header" onclick="toggleRoom('room-{{ loop.index }}')">
                     <h2 class="room-title">{{ room.name }}</h2>
-                    <span class="room-toggle" id="toggle-room-{{ loop.index }}">▼</span>
+                    <span class="room-toggle collapsed" id="toggle-room-{{ loop.index }}">▼</span>
                 </div>
                 
-                <div class="room-content" id="room-{{ loop.index }}">
+                <div class="room-content collapsed" id="room-{{ loop.index }}">
                     <div class="devices">
                     {% for device in room.devices %}
                     <div class="device-card" data-device-id="{{ device.device_id }}">
@@ -537,6 +573,8 @@
                                     {% if device.features.brightness %}• Dimmbar{% endif %}
                                 {% elif device.type == "thermostat" %}
                                     Thermostat
+                                {% elif device.type == "contact" or device.type == "contact_sensor" %}
+                                    Contact Sensor • Read-Only
                                 {% else %}
                                     {{ device.type or "Unknown" }}
                                 {% endif %}
@@ -601,40 +639,48 @@
                             </div>
                         </div>
                         
-                        <div class="mode-display">
-                            <div class="mode-label">Modus</div>
-                            <div class="mode-value" id="state-{{ device.device_id }}-mode">OFF</div>
-                        </div>
-                        
                         <div class="temp-controls">
-                            <button class="temp-button" onclick="adjustTarget('{{ device.device_id }}', -0.5)">
+                            <button class="temp-button" onclick="adjustTarget('{{ device.device_id }}', -1.0)">
-                                -0.5
+                                -1.0
                             </button>
-                            <button class="temp-button" onclick="adjustTarget('{{ device.device_id }}', 0.5)">
+                            <button class="temp-button" onclick="adjustTarget('{{ device.device_id }}', 1.0)">
-                                +0.5
+                                +1.0
                             </button>
                         </div>
                         
-                        <div class="mode-controls">
+                        {% elif device.type == "contact" or device.type == "contact_sensor" %}
-                            <button 
+                        <div class="contact-status">
-                                class="mode-button" 
+                            <span class="contact-badge closed" id="state-{{ device.device_id }}">
-                                id="mode-{{ device.device_id }}-off"
+                                Geschlossen
-                                onclick="setMode('{{ device.device_id }}', 'off')">
+                            </span>
-                                Off
-                            </button>
-                            <button 
-                                class="mode-button" 
-                                id="mode-{{ device.device_id }}-heat"
-                                onclick="setMode('{{ device.device_id }}', 'heat')">
-                                Heat
-                            </button>
-                            <button 
-                                class="mode-button" 
-                                id="mode-{{ device.device_id }}-auto"
-                                onclick="setMode('{{ device.device_id }}', 'auto')">
-                                Auto
-                            </button>
                         </div>
+                        
+                        <div class="contact-info">
+                            🔒 Nur-Lesen Gerät • Keine Steuerung möglich
+                        </div>
+                        
+                        {% elif device.type == "temp_humidity" or device.type == "temp_humidity_sensor" %}
+                        <div class="temp-humidity-display">
+                            <div class="temp-humidity-row">
+                                <span class="temp-humidity-label">🌡️ Temperatur:</span>
+                                <span class="temp-humidity-value" id="th-{{ device.device_id }}-t">--</span>
+                                <span style="font-size: 1.25rem; font-weight: 600;">°C</span>
+                            </div>
+                            <div class="temp-humidity-row">
+                                <span class="temp-humidity-label">💧 Luftfeuchte:</span>
+                                <span class="temp-humidity-value" id="th-{{ device.device_id }}-h">--</span>
+                                <span style="font-size: 1.25rem; font-weight: 600;">%</span>
+                            </div>
+                        </div>
+                        
+                        <div class="temp-humidity-battery" id="th-{{ device.device_id }}-battery" style="display: none;">
+                            🔋 <span id="th-{{ device.device_id }}-battery-value">--</span>%
+                        </div>
+                        
+                        <div class="temp-humidity-info">
+                            🔒 Nur-Lesen Gerät • Keine Steuerung möglich
+                        </div>
+                        
                         {% endif %}
                     </div>
                     {% endfor %}
@@ -761,7 +807,6 @@
         let eventSource = null;
         let currentState = {};
         let thermostatTargets = {};
-        let thermostatModes = {};
         
         // Initialize device states
         {% for room in rooms %}
@@ -770,7 +815,6 @@
         currentState['{{ device.device_id }}'] = 'off';
         {% elif device.type == "thermostat" %}
         thermostatTargets['{{ device.device_id }}'] = 21.0;
-        thermostatModes['{{ device.device_id }}'] = 'off';
         {% endif %}
         {% endfor %}
         {% endfor %}
@@ -846,7 +890,6 @@
         // Adjust thermostat target temperature
         async function adjustTarget(deviceId, delta) {
             const currentTarget = thermostatTargets[deviceId] || 21.0;
-            const currentMode = thermostatModes[deviceId] || 'off';
             const newTarget = Math.max(5.0, Math.min(30.0, currentTarget + delta));
             
             try {
@@ -858,7 +901,6 @@
                     body: JSON.stringify({
                         type: 'thermostat',
                         payload: {
-                            mode: currentMode,
                             target: newTarget
                         }
                     })
@@ -877,38 +919,6 @@
             }
         }
         
-        // Set thermostat mode
-        async function setMode(deviceId, mode) {
-            const currentTarget = thermostatTargets[deviceId] || 21.0;
-            
-            try {
-                const response = await fetch(api(`/devices/${deviceId}/set`), {
-                    method: 'POST',
-                    headers: {
-                        'Content-Type': 'application/json'
-                    },
-                    body: JSON.stringify({
-                        type: 'thermostat',
-                        payload: {
-                            mode: mode,
-                            target: currentTarget
-                        }
-                    })
-                });
-                
-                if (response.ok) {
-                    console.log(`Sent mode ${mode} to ${deviceId}`);
-                    addEvent({
-                        action: 'mode_set',
-                        device_id: deviceId,
-                        mode: mode
-                    });
-                }
-            } catch (error) {
-                console.error('Failed to set mode:', error);
-            }
-        }
-        
         // Update device UI
         function updateDeviceUI(deviceId, power, brightness) {
             currentState[deviceId] = power;
@@ -955,7 +965,6 @@
         function updateThermostatUI(deviceId, current, target, mode) {
             const currentSpan = document.getElementById(`state-${deviceId}-current`);
             const targetSpan = document.getElementById(`state-${deviceId}-target`);
-            const modeSpan = document.getElementById(`state-${deviceId}-mode`);
             
             if (current !== undefined && currentSpan) {
                 currentSpan.textContent = current.toFixed(1);
@@ -967,24 +976,56 @@
                 }
                 thermostatTargets[deviceId] = target;
             }
+        }
         
-            if (mode !== undefined) {
+        // Update contact sensor UI
-                if (modeSpan) {
+        function updateContactUI(deviceId, contactState) {
-                    modeSpan.textContent = mode.toUpperCase();
+            const badge = document.getElementById(`state-${deviceId}`);
+            if (!badge) {
+                console.warn(`No contact badge found for device ${deviceId}`);
+                return;
             }
-                thermostatModes[deviceId] = mode;
             
-                // Update mode button states
+            // contactState is either "open" or "closed"
-                ['off', 'heat', 'auto'].forEach(m => {
+            if (contactState === "open") {
-                    const btn = document.getElementById(`mode-${deviceId}-${m}`);
+                badge.textContent = "Geöffnet";
-                    if (btn) {
+                badge.className = "contact-badge open";
-                        if (m === mode.toLowerCase()) {
+            } else if (contactState === "closed") {
-                            btn.classList.add('active');
+                badge.textContent = "Geschlossen";
-                        } else {
+                badge.className = "contact-badge closed";
-                            btn.classList.remove('active');
             }
         }
-                });
+        
+        // Update temperature & humidity sensor UI
+        function updateTempHumidityUI(deviceId, payload) {
+            const tempSpan = document.getElementById(`th-${deviceId}-t`);
+            const humiditySpan = document.getElementById(`th-${deviceId}-h`);
+            const batteryDiv = document.getElementById(`th-${deviceId}-battery`);
+            const batteryValueSpan = document.getElementById(`th-${deviceId}-battery-value`);
+            
+            if (!tempSpan || !humiditySpan) {
+                console.warn(`No temp/humidity elements found for device ${deviceId}`);
+                return;
+            }
+            
+            // Update temperature (rounded to 1 decimal)
+            if (payload.temperature !== undefined && payload.temperature !== null) {
+                tempSpan.textContent = payload.temperature.toFixed(1);
+            }
+            
+            // Update humidity (rounded to 0-1 decimals)
+            if (payload.humidity !== undefined && payload.humidity !== null) {
+                // Round to 1 decimal if has decimals, otherwise integer
+                const humidity = payload.humidity;
+                humiditySpan.textContent = (humidity % 1 === 0) ? humidity.toFixed(0) : humidity.toFixed(1);
+            }
+            
+            // Update battery if present
+            if (payload.battery !== undefined && payload.battery !== null && batteryDiv && batteryValueSpan) {
+                batteryValueSpan.textContent = payload.battery;
+                batteryDiv.style.display = 'block';
+            } else if (batteryDiv) {
+                batteryDiv.style.display = 'none';
             }
         }
         
@@ -1043,20 +1084,26 @@
                 }
                 
                 // Check if it's a thermostat
-                if (data.payload.mode !== undefined || data.payload.target !== undefined || data.payload.current !== undefined) {
+                if (data.payload.target !== undefined || data.payload.current !== undefined) {
-                    if (data.payload.mode !== undefined) {
-                        thermostatModes[data.device_id] = data.payload.mode;
-                    }
                     if (data.payload.target !== undefined) {
                         thermostatTargets[data.device_id] = data.payload.target;
                     }
                     updateThermostatUI(
                         data.device_id,
                         data.payload.current,
-                        data.payload.target,
+                        data.payload.target
-                        data.payload.mode
                     );
                 }
+                
+                // Check if it's a contact sensor
+                if (data.payload.contact !== undefined) {
+                    updateContactUI(data.device_id, data.payload.contact);
+                }
+                
+                // Check if it's a temp/humidity sensor
+                if (data.payload.temperature !== undefined || data.payload.humidity !== undefined) {
+                    updateTempHumidityUI(data.device_id, data.payload);
+                }
             }
         };
         
@@ -1171,11 +1218,16 @@
                         // It's a light
                         currentState[deviceId] = state.power;
                         updateDeviceUI(deviceId, state.power, state.brightness);
-                    } else if (state.mode !== undefined || state.target !== undefined) {
+                    } else if (state.target !== undefined) {
                         // It's a thermostat
-                        if (state.mode) thermostatModes[deviceId] = state.mode;
                         if (state.target) thermostatTargets[deviceId] = state.target;
-                        updateThermostatUI(deviceId, state.current, state.target, state.mode);
+                        updateThermostatUI(deviceId, state.current, state.target);
+                    } else if (state.contact !== undefined) {
+                        // It's a contact sensor
+                        updateContactUI(deviceId, state.contact);
+                    } else if (state.temperature !== undefined || state.humidity !== undefined) {
+                        // It's a temp/humidity sensor
+                        updateTempHumidityUI(deviceId, state);
                     }
                 }
             } catch (error) {

config/devices.yaml

@@ -1,5 +1,4 @@
 version: 1
-
 mqtt:
   broker: "172.16.2.16"
   port: 1883
@@ -7,54 +6,345 @@ mqtt:
   username: null
   password: null
   keepalive: 60
-
 redis:
   url: "redis://172.23.1.116:6379/8"
   channel: "ui:updates"
-
 devices:
-  - device_id: test_lampe_1
+- device_id: lampe_semeniere_wohnzimmer
   type: light
   cap_version: "light@1.2.0"
-    technology: simulator
+  technology: zigbee2mqtt
   features:
     power: true
-      brightness: true
+    brightness: false
   topics:
-      set: "vendor/test_lampe_1/set"
+    state: "zigbee2mqtt/0xf0d1b8000015480b"
-      state: "vendor/test_lampe_1/state"
+    set: "zigbee2mqtt/0xf0d1b8000015480b/set"
-  - device_id: test_lampe_2
+  metadata:
+    friendly_name: "Lampe Semeniere Wohnzimmer"
+    ieee_address: "0xf0d1b8000015480b"
+    model: "AC10691"
+    vendor: "OSRAM"
+- device_id: grosse_lampe_wohnzimmer
   type: light
   cap_version: "light@1.2.0"
-    technology: simulator
+  technology: zigbee2mqtt
   features:
     power: true
+    brightness: false
   topics:
-      set: "vendor/test_lampe_2/set"
+    state: "zigbee2mqtt/0xf0d1b80000151aca"
-      state: "vendor/test_lampe_2/state"
+    set: "zigbee2mqtt/0xf0d1b80000151aca/set"
-  - device_id: test_lampe_3
+  metadata:
+    friendly_name: "grosse Lampe Wohnzimmer"
+    ieee_address: "0xf0d1b80000151aca"
+    model: "AC10691"
+    vendor: "OSRAM"
+- device_id: lampe_naehtischchen_wohnzimmer
   type: light
   cap_version: "light@1.2.0"
-    technology: simulator
+  technology: zigbee2mqtt
   features:
     power: true
-      brightness: true
+    brightness: false
   topics:
-      set: "vendor/test_lampe_3/set"
+    state: "zigbee2mqtt/0x842e14fffee560ee"
-      state: "vendor/test_lampe_3/state"
+    set: "zigbee2mqtt/0x842e14fffee560ee/set"
-  - device_id: test_thermo_1
+  metadata:
-    type: thermostat
+    friendly_name: "Lampe Naehtischchen Wohnzimmer"
-    cap_version: "thermostat@2.0.0"
+    ieee_address: "0x842e14fffee560ee"
-    technology: simulator
+    model: "HG06337"
+    vendor: "Lidl"
+- device_id: kleine_lampe_rechts_esszimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
   features:
-      mode: false
+    power: true
-      target: true
+    brightness: false
-      current: true
-      battery: true
   topics:
-      set: "vendor/test_thermo_1/set"
+    state: "zigbee2mqtt/0xf0d1b80000156645"
-      state: "vendor/test_thermo_1/state"
+    set: "zigbee2mqtt/0xf0d1b80000156645/set"
-  - device_id: experiment_light_1
+  metadata:
+    friendly_name: "kleine Lampe rechts Esszimmer"
+    ieee_address: "0xf0d1b80000156645"
+    model: "AC10691"
+    vendor: "OSRAM"
+- device_id: kleine_lampe_links_esszimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: false
+  topics:
+    state: "zigbee2mqtt/0xf0d1b80000153099"
+    set: "zigbee2mqtt/0xf0d1b80000153099/set"
+  metadata:
+    friendly_name: "kleine Lampe links Esszimmer"
+    ieee_address: "0xf0d1b80000153099"
+    model: "AC10691"
+    vendor: "OSRAM"
+- device_id: leselampe_esszimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0xec1bbdfffe7b84f2"
+    set: "zigbee2mqtt/0xec1bbdfffe7b84f2/set"
+  metadata:
+    friendly_name: "Leselampe Esszimmer"
+    ieee_address: "0xec1bbdfffe7b84f2"
+    model: "LED1842G3"
+    vendor: "IKEA"
+- device_id: medusalampe_schlafzimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: false
+  topics:
+    state: "zigbee2mqtt/0xf0d1b80000154c7c"
+    set: "zigbee2mqtt/0xf0d1b80000154c7c/set"
+  metadata:
+    friendly_name: "Medusa-Lampe Schlafzimmer"
+    ieee_address: "0xf0d1b80000154c7c"
+    model: "AC10691"
+    vendor: "OSRAM"
+- device_id: sportlicht_am_fernseher_studierzimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+    color_temperature: true
+  topics:
+    state: "zigbee2mqtt/0x842e14fffe76a23a"
+    set: "zigbee2mqtt/0x842e14fffe76a23a/set"
+  metadata:
+    friendly_name: "Sportlicht am Fernseher, Studierzimmer"
+    ieee_address: "0x842e14fffe76a23a"
+    model: "LED1733G7"
+    vendor: "IKEA"
+- device_id: deckenlampe_schlafzimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0x0017880108a406a7"
+    set: "zigbee2mqtt/0x0017880108a406a7/set"
+  metadata:
+    friendly_name: "Deckenlampe Schlafzimmer"
+    ieee_address: "0x0017880108a406a7"
+    model: "8718699688882"
+    vendor: "Philips"
+- device_id: bettlicht_wolfgang
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0x00178801081570bf"
+    set: "zigbee2mqtt/0x00178801081570bf/set"
+  metadata:
+    friendly_name: "Bettlicht Wolfgang"
+    ieee_address: "0x00178801081570bf"
+    model: "9290020399"
+    vendor: "Philips"
+- device_id: bettlicht_patty
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0x0017880108158b32"
+    set: "zigbee2mqtt/0x0017880108158b32/set"
+  metadata:
+    friendly_name: "Bettlicht Patty"
+    ieee_address: "0x0017880108158b32"
+    model: "9290020399"
+    vendor: "Philips"
+- device_id: schranklicht_hinten_patty
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0x0017880106e29571"
+    set: "zigbee2mqtt/0x0017880106e29571/set"
+  metadata:
+    friendly_name: "Schranklicht hinten Patty"
+    ieee_address: "0x0017880106e29571"
+    model: "8718699673147"
+    vendor: "Philips"
+- device_id: schranklicht_vorne_patty
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: false
+  topics:
+    state: "zigbee2mqtt/0xf0d1b80000154cf5"
+    set: "zigbee2mqtt/0xf0d1b80000154cf5/set"
+  metadata:
+    friendly_name: "Schranklicht vorne Patty"
+    ieee_address: "0xf0d1b80000154cf5"
+    model: "AC10691"
+    vendor: "OSRAM"
+- device_id: leselampe_patty
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0x001788010600ec9d"
+    set: "zigbee2mqtt/0x001788010600ec9d/set"
+  metadata:
+    friendly_name: "Leselampe Patty"
+    ieee_address: "0x001788010600ec9d"
+    model: "8718699673147"
+    vendor: "Philips"
+- device_id: deckenlampe_esszimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0x0017880108a03e45"
+    set: "zigbee2mqtt/0x0017880108a03e45/set"
+  metadata:
+    friendly_name: "Deckenlampe Esszimmer"
+    ieee_address: "0x0017880108a03e45"
+    model: "929002241201"
+    vendor: "Philips"
+- device_id: standlampe_esszimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+    color_temperature: true
+  topics:
+    state: "zigbee2mqtt/0xbc33acfffe21f547"
+    set: "zigbee2mqtt/0xbc33acfffe21f547/set"
+  metadata:
+    friendly_name: "Standlampe Esszimmer"
+    ieee_address: "0xbc33acfffe21f547"
+    model: "LED1732G11"
+    vendor: "IKEA"
+- device_id: haustuer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0xec1bbdfffea6a3da"
+    set: "zigbee2mqtt/0xec1bbdfffea6a3da/set"
+  metadata:
+    friendly_name: "Haustür"
+    ieee_address: "0xec1bbdfffea6a3da"
+    model: "LED1842G3"
+    vendor: "IKEA"
+- device_id: deckenlampe_flur_oben
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+    color_temperature: true
+  topics:
+    state: "zigbee2mqtt/0x001788010d2123a7"
+    set: "zigbee2mqtt/0x001788010d2123a7/set"
+  metadata:
+    friendly_name: "Deckenlampe Flur oben"
+    ieee_address: "0x001788010d2123a7"
+    model: "929003099001"
+    vendor: "Philips"
+- device_id: kueche_deckenlampe
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0x001788010d2c40c4"
+    set: "zigbee2mqtt/0x001788010d2c40c4/set"
+  metadata:
+    friendly_name: "Küche Deckenlampe"
+    ieee_address: "0x001788010d2c40c4"
+    model: "929002469202"
+    vendor: "Philips"
+- device_id: sportlicht_tisch
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0xf0d1b8be2409f31b"
+    set: "zigbee2mqtt/0xf0d1b8be2409f31b/set"
+  metadata:
+    friendly_name: "Sportlicht Tisch"
+    ieee_address: "0xf0d1b8be2409f31b"
+    model: "4058075729063"
+    vendor: "LEDVANCE"
+- device_id: sportlicht_regal
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+  topics:
+    state: "zigbee2mqtt/0xf0d1b8be2409f569"
+    set: "zigbee2mqtt/0xf0d1b8be2409f569/set"
+  metadata:
+    friendly_name: "Sportlicht Regal"
+    ieee_address: "0xf0d1b8be2409f569"
+    model: "4058075729063"
+    vendor: "LEDVANCE"
+- device_id: licht_flur_oben_am_spiegel
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: true
+    color_temperature: true
+  topics:
+    state: "zigbee2mqtt/0x842e14fffefe4ba4"
+    set: "zigbee2mqtt/0x842e14fffefe4ba4/set"
+  metadata:
+    friendly_name: "Licht Flur oben am Spiegel"
+    ieee_address: "0x842e14fffefe4ba4"
+    model: "LED1732G11"
+    vendor: "IKEA"
+- device_id: experimentlabtest
   type: light
   cap_version: "light@1.2.0"
   technology: zigbee2mqtt
@@ -62,5 +352,372 @@ devices:
     power: true
     brightness: true
   topics:
-      set: "zigbee2mqtt/0xf0d1b80000195038/set"
     state: "zigbee2mqtt/0xf0d1b80000195038"
+    set: "zigbee2mqtt/0xf0d1b80000195038/set"
+  metadata:
+    friendly_name: "ExperimentLabTest"
+    ieee_address: "0xf0d1b80000195038"
+    model: "4058075208421"
+    vendor: "LEDVANCE"
+- device_id: thermostat_wolfgang
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: zigbee2mqtt
+  features:
+    heating: true
+    temperature_range:
+    - 5
+    - 30
+    temperature_step: 0.5
+  topics:
+    state: "zigbee2mqtt/0x540f57fffe7e3cfe"
+    set: "zigbee2mqtt/0x540f57fffe7e3cfe/set"
+  metadata:
+    friendly_name: "Wolfgang"
+    ieee_address: "0x540f57fffe7e3cfe"
+    model: "GS361A-H04"
+    vendor: "Siterwell"
+- device_id: thermostat_kueche
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: zigbee2mqtt
+  features:
+    heating: true
+    temperature_range:
+    - 5
+    - 30
+    temperature_step: 0.5
+  topics:
+    state: "zigbee2mqtt/0x94deb8fffe2e5c06"
+    set: "zigbee2mqtt/0x94deb8fffe2e5c06/set"
+  metadata:
+    friendly_name: "Kueche"
+    ieee_address: "0x94deb8fffe2e5c06"
+    model: "GS361A-H04"
+    vendor: "Siterwell"
+- device_id: thermostat_schlafzimmer
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: max
+  features:
+    mode: true
+    target: true
+    current: false
+  topics:
+    set: "homegear/instance1/set/42/1/SET_TEMPERATURE"
+    state: "homegear/instance1/plain/42/1/SET_TEMPERATURE"
+  metadata:
+    friendly_name: "Thermostat Schlafzimmer"
+    location: "Schlafzimmer"
+    vendor: "eQ-3"
+    model: "MAX! Thermostat"
+    peer_id: "42"
+    channel: "1"
+- device_id: thermostat_esszimmer
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: max
+  features:
+    mode: true
+    target: true
+    current: false
+  topics:
+    set: "homegear/instance1/set/45/1/SET_TEMPERATURE"
+    state: "homegear/instance1/plain/45/1/SET_TEMPERATURE"
+  metadata:
+    friendly_name: "Thermostat Esszimmer"
+    location: "Esszimmer"
+    vendor: "eQ-3"
+    model: "MAX! Thermostat"
+    peer_id: "45"
+    channel: "1"
+- device_id: thermostat_wohnzimmer
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: max
+  features:
+    mode: true
+    target: true
+    current: false
+  topics:
+    set: "homegear/instance1/set/46/1/SET_TEMPERATURE"
+    state: "homegear/instance1/plain/46/1/SET_TEMPERATURE"
+  metadata:
+    friendly_name: "Thermostat Wohnzimmer"
+    location: "Wohnzimmer"
+    vendor: "eQ-3"
+    model: "MAX! Thermostat"
+    peer_id: "46"
+    channel: "1"
+- device_id: thermostat_patty
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: max
+  features:
+    mode: true
+    target: true
+    current: false
+  topics:
+    set: "homegear/instance1/set/39/1/SET_TEMPERATURE"
+    state: "homegear/instance1/plain/39/1/SET_TEMPERATURE"
+  metadata:
+    friendly_name: "Thermostat Patty"
+    location: "Arbeitszimmer Patty"
+    vendor: "eQ-3"
+    model: "MAX! Thermostat"
+    peer_id: "39"
+    channel: "1"
+- device_id: thermostat_bad_oben
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: max
+  features:
+    mode: true
+    target: true
+    current: false
+  topics:
+    set: "homegear/instance1/set/41/1/SET_TEMPERATURE"
+    state: "homegear/instance1/plain/41/1/SET_TEMPERATURE"
+  metadata:
+    friendly_name: "Thermostat Bad Oben"
+    location: "Bad Oben"
+    vendor: "eQ-3"
+    model: "MAX! Thermostat"
+    peer_id: "41"
+    channel: "1"
+- device_id: thermostat_bad_unten
+  type: thermostat
+  cap_version: "thermostat@1.0.0"
+  technology: max
+  features:
+    mode: true
+    target: true
+    current: false
+  topics:
+    set: "homegear/instance1/set/48/1/SET_TEMPERATURE"
+    state: "homegear/instance1/plain/48/1/SET_TEMPERATURE"
+  metadata:
+    friendly_name: "Thermostat Bad Unten"
+    location: "Bad Unten"
+    vendor: "eQ-3"
+    model: "MAX! Thermostat"
+    peer_id: "48"
+    channel: "1"
+- device_id: sterne_wohnzimmer
+  type: light
+  cap_version: "light@1.2.0"
+  technology: zigbee2mqtt
+  features:
+    power: true
+    brightness: false
+  topics:
+    state: "zigbee2mqtt/0xf0d1b80000155fc2"
+    set: "zigbee2mqtt/0xf0d1b80000155fc2/set"
+  metadata:
+    friendly_name: "Sterne Wohnzimmer"
+    ieee_address: "0xf0d1b80000155fc2"
+    model: "AC10691"
+    vendor: "OSRAM"
+
+- device_id: kontakt_schlafzimmer_strasse
+  type: contact
+  name: Kontakt Schlafzimmer Straße
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/52/1/STATE
+  features: {}
+- device_id: kontakt_esszimmer_strasse_rechts
+  type: contact
+  name: Kontakt Esszimmer Straße rechts
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/26/1/STATE
+  features: {}
+- device_id: kontakt_esszimmer_strasse_links
+  type: contact
+  name: Kontakt Esszimmer Straße links
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/27/1/STATE
+  features: {}
+- device_id: kontakt_wohnzimmer_garten_rechts
+  type: contact
+  name: Kontakt Wohnzimmer Garten rechts
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/28/1/STATE
+  features: {}
+- device_id: kontakt_wohnzimmer_garten_links
+  type: contact
+  name: Kontakt Wohnzimmer Garten links
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/29/1/STATE
+  features: {}
+- device_id: kontakt_kueche_garten_fenster
+  type: contact
+  name: Kontakt Küche Garten Fenster
+  cap_version: contact_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d008b332785
+  features: {}
+- device_id: kontakt_kueche_garten_tuer
+  type: contact
+  name: Kontakt Küche Garten Tür
+  cap_version: contact_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d008b332788
+  features: {}
+- device_id: kontakt_kueche_strasse_rechts
+  type: contact
+  name: Kontakt Küche Straße rechts
+  cap_version: contact_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d008b151803
+  features: {}
+- device_id: kontakt_kueche_strasse_links
+  type: contact
+  name: Kontakt Küche Straße links
+  cap_version: contact_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d008b331d0b
+  features: {}
+- device_id: kontakt_patty_garten_rechts
+  type: contact
+  name: Kontakt Patty Garten rechts
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/18/1/STATE
+  features: {}
+- device_id: kontakt_patty_garten_links
+  type: contact
+  name: Kontakt Patty Garten links
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/22/1/STATE
+  features: {}
+- device_id: kontakt_patty_strasse
+  type: contact
+  name: Kontakt Patty Straße
+  cap_version: contact_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d000af457cf
+  features: {}
+- device_id: kontakt_wolfgang_garten
+  type: contact
+  name: Kontakt Wolfgang Garten
+  cap_version: contact_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d008b3328da
+  features: {}
+- device_id: kontakt_bad_oben_strasse
+  type: contact
+  name: Kontakt Bad Oben Straße
+  cap_version: contact_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d008b333aec
+  features: {}
+- device_id: kontakt_bad_unten_strasse
+  type: contact
+  name: Kontakt Bad Unten Straße
+  cap_version: contact_sensor@1.0.0
+  technology: max
+  topics:
+    state: homegear/instance1/plain/44/1/STATE
+  features: {}
+- device_id: sensor_schlafzimmer
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d00043292dc
+  features: {}
+- device_id: sensor_wohnzimmer
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d0008975707
+  features: {}
+- device_id: sensor_kueche
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d00083299bb
+  features: {}
+- device_id: sensor_arbeitszimmer_patty
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d0003f052b7
+  features: {}
+- device_id: sensor_arbeitszimmer_wolfgang
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d000543fb99
+  features: {}
+- device_id: sensor_bad_oben
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d00093e8987
+  features: {}
+- device_id: sensor_bad_unten
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d00093e662a
+  features: {}
+- device_id: sensor_flur
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d000836ccc6
+  features: {}
+- device_id: sensor_waschkueche
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d000449f3bc
+  features: {}
+- device_id: sensor_sportzimmer
+  type: temp_humidity_sensor
+  name: Temperatur & Luftfeuchte
+  cap_version: temp_humidity_sensor@1.0.0
+  technology: zigbee2mqtt
+  topics:
+    state: zigbee2mqtt/0x00158d0009421422
+  features: {}
+
+

config/devices.yaml-20251110

@@ -0,0 +1,66 @@
+version: 1
+
+mqtt:
+  broker: "172.16.2.16"
+  port: 1883
+  client_id: "home-automation-abstraction"
+  username: null
+  password: null
+  keepalive: 60
+
+redis:
+  url: "redis://172.23.1.116:6379/8"
+  channel: "ui:updates"
+
+devices:
+  - device_id: test_lampe_1
+    type: light
+    cap_version: "light@1.2.0"
+    technology: simulator
+    features:
+      power: true
+      brightness: true
+    topics:
+      set: "vendor/test_lampe_1/set"
+      state: "vendor/test_lampe_1/state"
+  - device_id: test_lampe_2
+    type: light
+    cap_version: "light@1.2.0"
+    technology: simulator
+    features:
+      power: true
+    topics:
+      set: "vendor/test_lampe_2/set"
+      state: "vendor/test_lampe_2/state"
+  - device_id: test_lampe_3
+    type: light
+    cap_version: "light@1.2.0"
+    technology: simulator
+    features:
+      power: true
+      brightness: true
+    topics:
+      set: "vendor/test_lampe_3/set"
+      state: "vendor/test_lampe_3/state"
+  - device_id: test_thermo_1
+    type: thermostat
+    cap_version: "thermostat@2.0.0"
+    technology: simulator
+    features:
+      mode: false
+      target: true
+      current: true
+      battery: true
+    topics:
+      set: "vendor/test_thermo_1/set"
+      state: "vendor/test_thermo_1/state"
+  - device_id: experiment_light_1
+    type: light
+    cap_version: "light@1.2.0"
+    technology: zigbee2mqtt
+    features:
+      power: true
+      brightness: true
+    topics:
+      set: "zigbee2mqtt/0xf0d1b80000195038/set"
+      state: "zigbee2mqtt/0xf0d1b80000195038"

config/devices.yaml.backup-20251110-110730

@@ -0,0 +1,66 @@
+version: 1
+
+mqtt:
+  broker: "172.16.2.16"
+  port: 1883
+  client_id: "home-automation-abstraction"
+  username: null
+  password: null
+  keepalive: 60
+
+redis:
+  url: "redis://172.23.1.116:6379/8"
+  channel: "ui:updates"
+
+devices:
+  - device_id: test_lampe_1
+    type: light
+    cap_version: "light@1.2.0"
+    technology: simulator
+    features:
+      power: true
+      brightness: true
+    topics:
+      set: "vendor/test_lampe_1/set"
+      state: "vendor/test_lampe_1/state"
+  - device_id: test_lampe_2
+    type: light
+    cap_version: "light@1.2.0"
+    technology: simulator
+    features:
+      power: true
+    topics:
+      set: "vendor/test_lampe_2/set"
+      state: "vendor/test_lampe_2/state"
+  - device_id: test_lampe_3
+    type: light
+    cap_version: "light@1.2.0"
+    technology: simulator
+    features:
+      power: true
+      brightness: true
+    topics:
+      set: "vendor/test_lampe_3/set"
+      state: "vendor/test_lampe_3/state"
+  - device_id: test_thermo_1
+    type: thermostat
+    cap_version: "thermostat@2.0.0"
+    technology: simulator
+    features:
+      mode: false
+      target: true
+      current: true
+      battery: true
+    topics:
+      set: "vendor/test_thermo_1/set"
+      state: "vendor/test_thermo_1/state"
+  - device_id: experiment_light_1
+    type: light
+    cap_version: "light@1.2.0"
+    technology: zigbee2mqtt
+    features:
+      power: true
+      brightness: true
+    topics:
+      set: "zigbee2mqtt/0xf0d1b80000195038/set"
+      state: "zigbee2mqtt/0xf0d1b80000195038"

config/layout.yaml

@@ -1,35 +1,252 @@
-# UI Layout Configuration
-# Defines rooms and device tiles for the home automation UI
-
 rooms:
-  - name: Wohnzimmer
-    devices:
-      - device_id: test_lampe_2
-        title: Deckenlampe
-        icon: "💡"
-        rank: 5
-      - device_id: test_lampe_1
-        title: Stehlampe
-        icon: "🔆"
-        rank: 10
-      - device_id: test_thermo_1
-        title: Thermostat
-        icon: "🌡️"
-        rank: 15
-        
 - name: Schlafzimmer
   devices:
-      - device_id: test_lampe_3
+  - device_id: bettlicht_patty
-        title: Nachttischlampe
+    title: Bettlicht Patty
-        icon: "🛏️"
+    icon: 🛏️
     rank: 10
-      
+  - device_id: bettlicht_wolfgang
-  - name: Lab
+    title: Bettlicht Wolfgang
+    icon: 🛏️
+    rank: 20
+  - device_id: deckenlampe_schlafzimmer
+    title: Deckenlampe Schlafzimmer
+    icon: 💡
+    rank: 30
+  - device_id: medusalampe_schlafzimmer
+    title: Medusa-Lampe Schlafzimmer
+    icon: 💡
+    rank: 40
+  - device_id: thermostat_schlafzimmer
+    title: Thermostat Schlafzimmer
+    icon: 🌡️
+    rank: 45
+  - device_id: kontakt_schlafzimmer_strasse
+    title: Kontakt Straße
+    icon: 🪟
+    rank: 46
+  - device_id: sensor_schlafzimmer
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 47
+- name: Esszimmer
   devices:
-      - device_id: experiment_light_1
+  - device_id: deckenlampe_esszimmer
-        title: Experimentierlampe
+    title: Deckenlampe Esszimmer
-        icon: "💡"
+    icon: 💡
-        rank: 10
+    rank: 50
-
+  - device_id: leselampe_esszimmer
-
+    title: Leselampe Esszimmer
+    icon: 💡
+    rank: 60
+  - device_id: standlampe_esszimmer
+    title: Standlampe Esszimmer
+    icon: 💡
+    rank: 70
+  - device_id: kleine_lampe_links_esszimmer
+    title: kleine Lampe links Esszimmer
+    icon: 💡
+    rank: 80
+  - device_id: kleine_lampe_rechts_esszimmer
+    title: kleine Lampe rechts Esszimmer
+    icon: 💡
+    rank: 90
+  - device_id: thermostat_esszimmer
+    title: Thermostat Esszimmer
+    icon: 🌡️
+    rank: 95
+  - device_id: kontakt_esszimmer_strasse_rechts
+    title: Kontakt Straße rechts
+    icon: 🪟
+    rank: 96
+  - device_id: kontakt_esszimmer_strasse_links
+    title: Kontakt Straße links
+    icon: 🪟
+    rank: 97
+- name: Wohnzimmer
+  devices:
+  - device_id: lampe_naehtischchen_wohnzimmer
+    title: Lampe Naehtischchen Wohnzimmer
+    icon: 💡
+    rank: 100
+  - device_id: lampe_semeniere_wohnzimmer
+    title: Lampe Semeniere Wohnzimmer
+    icon: 💡
+    rank: 110
+  - device_id: sterne_wohnzimmer
+    title: Sterne Wohnzimmer
+    icon: 💡
+    rank: 120
+  - device_id: grosse_lampe_wohnzimmer
+    title: grosse Lampe Wohnzimmer
+    icon: 💡
+    rank: 130
+  - device_id: thermostat_wohnzimmer
+    title: Thermostat Wohnzimmer
+    icon: 🌡️
+    rank: 135
+  - device_id: kontakt_wohnzimmer_garten_rechts
+    title: Kontakt Garten rechts
+    icon: 🪟
+    rank: 136
+  - device_id: kontakt_wohnzimmer_garten_links
+    title: Kontakt Garten links
+    icon: 🪟
+    rank: 137
+  - device_id: sensor_wohnzimmer
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 138
+- name: Küche
+  devices:
+  - device_id: kueche_deckenlampe
+    title: Küche Deckenlampe
+    icon: 💡
+    rank: 140
+  - device_id: thermostat_kueche
+    title: Kueche
+    icon: 🌡️
+    rank: 150
+  - device_id: kontakt_kueche_garten_fenster
+    title: Kontakt Garten Fenster
+    icon: 🪟
+    rank: 151
+  - device_id: kontakt_kueche_garten_tuer
+    title: Kontakt Garten Tür
+    icon: 🪟
+    rank: 152
+  - device_id: kontakt_kueche_strasse_rechts
+    title: Kontakt Straße rechts
+    icon: 🪟
+    rank: 153
+  - device_id: kontakt_kueche_strasse_links
+    title: Kontakt Straße links
+    icon: 🪟
+    rank: 154
+  - device_id: sensor_kueche
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 155
+- name: Arbeitszimmer Patty
+  devices:
+  - device_id: leselampe_patty
+    title: Leselampe Patty
+    icon: 💡
+    rank: 160
+  - device_id: schranklicht_hinten_patty
+    title: Schranklicht hinten Patty
+    icon: 💡
+    rank: 170
+  - device_id: schranklicht_vorne_patty
+    title: Schranklicht vorne Patty
+    icon: 💡
+    rank: 180
+  - device_id: thermostat_patty
+    title: Thermostat Patty
+    icon: 🌡️
+    rank: 185
+  - device_id: kontakt_patty_garten_rechts
+    title: Kontakt Garten rechts
+    icon: 🪟
+    rank: 186
+  - device_id: kontakt_patty_garten_links
+    title: Kontakt Garten links
+    icon: 🪟
+    rank: 187
+  - device_id: kontakt_patty_strasse
+    title: Kontakt Straße
+    icon: 🪟
+    rank: 188
+  - device_id: sensor_arbeitszimmer_patty
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 189
+- name: Arbeitszimmer Wolfgang
+  devices:
+  - device_id: thermostat_wolfgang
+    title: Wolfgang
+    icon: 🌡️
+    rank: 190
+  - device_id: experimentlabtest
+    title: ExperimentLabTest
+    icon: 💡
+    rank: 200
+  - device_id: kontakt_wolfgang_garten
+    title: Kontakt Garten
+    icon: 🪟
+    rank: 201
+  - device_id: sensor_arbeitszimmer_wolfgang
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 202
+- name: Flur
+  devices:
+  - device_id: deckenlampe_flur_oben
+    title: Deckenlampe Flur oben
+    icon: 💡
+    rank: 210
+  - device_id: haustuer
+    title: Haustür
+    icon: 💡
+    rank: 220
+  - device_id: licht_flur_oben_am_spiegel
+    title: Licht Flur oben am Spiegel
+    icon: 💡
+    rank: 230
+  - device_id: sensor_flur
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 235
+- name: Sportzimmer
+  devices:
+  - device_id: sportlicht_regal
+    title: Sportlicht Regal
+    icon: 🏃
+    rank: 240
+  - device_id: sportlicht_tisch
+    title: Sportlicht Tisch
+    icon: 🏃
+    rank: 250
+  - device_id: sportlicht_am_fernseher_studierzimmer
+    title: Sportlicht am Fernseher, Studierzimmer
+    icon: 🏃
+    rank: 260
+  - device_id: sensor_sportzimmer
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 265
+- name: Bad Oben
+  devices:
+  - device_id: thermostat_bad_oben
+    title: Thermostat Bad Oben
+    icon: 🌡️
+    rank: 270
+  - device_id: kontakt_bad_oben_strasse
+    title: Kontakt Straße
+    icon: 🪟
+    rank: 271
+  - device_id: sensor_bad_oben
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 272
+- name: Bad Unten
+  devices:
+  - device_id: thermostat_bad_unten
+    title: Thermostat Bad Unten
+    icon: 🌡️
+    rank: 280
+  - device_id: kontakt_bad_unten_strasse
+    title: Kontakt Straße
+    icon: 🪟
+    rank: 281
+  - device_id: sensor_bad_unten
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 282
+- name: Waschküche
+  devices:
+  - device_id: sensor_waschkueche
+    title: Temperatur & Luftfeuchte
+    icon: 🌡️
+    rank: 290
 

config/layout.yaml.backup-20251110-122723

@@ -0,0 +1,35 @@
+# UI Layout Configuration
+# Defines rooms and device tiles for the home automation UI
+
+rooms:
+  - name: Wohnzimmer
+    devices:
+      - device_id: test_lampe_2
+        title: Deckenlampe
+        icon: "💡"
+        rank: 5
+      - device_id: test_lampe_1
+        title: Stehlampe
+        icon: "🔆"
+        rank: 10
+      - device_id: test_thermo_1
+        title: Thermostat
+        icon: "🌡️"
+        rank: 15
+        
+  - name: Schlafzimmer
+    devices:
+      - device_id: test_lampe_3
+        title: Nachttischlampe
+        icon: "🛏️"
+        rank: 10
+      
+  - name: Lab
+    devices:
+      - device_id: experiment_light_1
+        title: Experimentierlampe
+        icon: "💡"
+        rank: 10
+
+
+

config/max-thermostats.txt

@@ -0,0 +1,23 @@
+# MAX! Thermostats - Room Assignment
+# 
+# Extracted from layout.yaml
+# Format: Room Name | Device ID (if thermostat exists)
+# 
+
+Schlafzimmer
+42
+
+Esszimmer
+45
+
+Wohnzimmer
+46
+
+Arbeitszimmer Patty
+39
+
+Bad Oben
+41
+
+Bad Unten
+48

config/raeume.txt

@@ -0,0 +1,31 @@
+Schlafzimmer
+  0x00158d00043292dc
+
+Esszimmer
+
+Wohnzimmer
+  0x00158d0008975707
+
+Küche
+  0x00158d00083299bb
+
+Arbeitszimmer Patty
+  0x00158d0003f052b7
+
+Arbeitszimmer Wolfgang
+  0x00158d000543fb99
+
+Bad Oben
+  0x00158d00093e8987
+
+Bad Unten
+  0x00158d00093e662a
+
+Flur
+  0x00158d000836ccc6
+
+Waschküche
+  0x00158d000449f3bc
+
+Sportzimmer
+  0x00158d0009421422

packages/home_capabilities/__init__.py

@@ -4,6 +4,10 @@ from packages.home_capabilities.light import CAP_VERSION as LIGHT_VERSION
 from packages.home_capabilities.light import LightState
 from packages.home_capabilities.thermostat import CAP_VERSION as THERMOSTAT_VERSION
 from packages.home_capabilities.thermostat import ThermostatState
+from packages.home_capabilities.contact_sensor import CAP_VERSION as CONTACT_SENSOR_VERSION
+from packages.home_capabilities.contact_sensor import ContactState
+from packages.home_capabilities.temp_humidity_sensor import CAP_VERSION as TEMP_HUMIDITY_SENSOR_VERSION
+from packages.home_capabilities.temp_humidity_sensor import TempHumidityState
 from packages.home_capabilities.layout import DeviceTile, Room, UiLayout, load_layout
 
 __all__ = [
@@ -11,6 +15,10 @@ __all__ = [
     "LIGHT_VERSION",
     "ThermostatState",
     "THERMOSTAT_VERSION",
+    "ContactState",
+    "CONTACT_SENSOR_VERSION",
+    "TempHumidityState",
+    "TEMP_HUMIDITY_SENSOR_VERSION",
     "DeviceTile",
     "Room",
     "UiLayout",

packages/home_capabilities/contact_sensor.py

@@ -0,0 +1,96 @@
+"""Contact Sensor Capability - Fensterkontakt (read-only).
+
+This module defines the ContactState model for door/window contact sensors.
+These sensors report their open/closed state and are read-only devices.
+
+Capability Version: contact_sensor@1.0.0
+"""
+
+from datetime import datetime
+from typing import Annotated, Literal
+
+from pydantic import BaseModel, Field, field_validator
+
+
+# Capability metadata
+CAP_VERSION = "contact_sensor@1.0.0"
+DISPLAY_NAME = "Contact Sensor"
+
+
+class ContactState(BaseModel):
+    """State model for contact sensors (door/window sensors).
+    
+    Contact sensors are read-only devices that report whether a door or window
+    is open or closed. They typically also report battery level and signal quality.
+    
+    Attributes:
+        contact: Current state of the contact ("open" or "closed")
+        battery: Battery level percentage (0-100), optional
+        linkquality: MQTT link quality indicator, optional
+        device_temperature: Internal device temperature in °C, optional
+        voltage: Battery voltage in mV, optional
+        ts: Timestamp of the state reading, optional
+    
+    Examples:
+        >>> ContactState(contact="open")
+        ContactState(contact='open', battery=None, ...)
+        
+        >>> ContactState(contact="closed", battery=95, linkquality=87)
+        ContactState(contact='closed', battery=95, linkquality=87, ...)
+    """
+    
+    contact: Literal["open", "closed"] = Field(
+        ...,
+        description="Contact state: 'open' for open door/window, 'closed' for closed"
+    )
+    
+    battery: Annotated[int, Field(ge=0, le=100)] | None = Field(
+        None,
+        description="Battery level in percent (0-100)"
+    )
+    
+    linkquality: int | None = Field(
+        None,
+        description="Link quality indicator (typically 0-255)"
+    )
+    
+    device_temperature: float | None = Field(
+        None,
+        description="Internal device temperature in degrees Celsius"
+    )
+    
+    voltage: int | None = Field(
+        None,
+        description="Battery voltage in millivolts"
+    )
+    
+    ts: datetime | None = Field(
+        None,
+        description="Timestamp of the state reading"
+    )
+    
+    @staticmethod
+    def normalize_bool(is_open: bool) -> "ContactState":
+        """Convert boolean to ContactState.
+        
+        Helper method to convert a boolean value to a ContactState instance.
+        Useful when integrating with systems that use True/False for contact state.
+        
+        Args:
+            is_open: True if contact is open, False if closed
+        
+        Returns:
+            ContactState instance with appropriate contact value
+        
+        Examples:
+            >>> ContactState.normalize_bool(True)
+            ContactState(contact='open', ...)
+            
+            >>> ContactState.normalize_bool(False)
+            ContactState(contact='closed', ...)
+        """
+        return ContactState(contact="open" if is_open else "closed")
+
+
+# Public API
+__all__ = ["ContactState", "CAP_VERSION", "DISPLAY_NAME"]

packages/home_capabilities/temp_humidity_sensor.py

@@ -0,0 +1,37 @@
+"""
+Temperature & Humidity Sensor Capability - temp_humidity_sensor@1.0.0
+
+Read-only sensor for temperature and humidity measurements.
+"""
+
+from datetime import datetime
+from typing import Annotated
+
+from pydantic import BaseModel, Field
+
+
+class TempHumidityState(BaseModel):
+    """
+    State model for temperature & humidity sensors.
+    
+    Required fields:
+    - temperature: Temperature in degrees Celsius
+    - humidity: Relative humidity in percent
+    
+    Optional fields:
+    - battery: Battery level 0-100%
+    - linkquality: Signal quality indicator
+    - voltage: Battery voltage in mV
+    - ts: Timestamp of measurement
+    """
+    temperature: float = Field(..., description="Temperature in degrees Celsius")
+    humidity: float = Field(..., description="Relative humidity in percent (0-100)")
+    battery: Annotated[int, Field(ge=0, le=100)] | None = None
+    linkquality: int | None = None
+    voltage: int | None = None
+    ts: datetime | None = None
+
+
+# Capability metadata
+CAP_VERSION = "temp_humidity_sensor@1.0.0"
+DISPLAY_NAME = "Temperature & Humidity Sensor"

packages/home_capabilities/thermostat.py

@@ -16,16 +16,16 @@ class ThermostatState(BaseModel):
     Thermostat state model with validation.
     
     Attributes:
-        mode: Operating mode (off, heat, auto)
+        mode: Operating mode (off, heat, auto) - optional for SET commands
         target: Target temperature in °C [5.0..30.0]
         current: Current temperature in °C (optional in SET, required in STATE)
         battery: Battery level 0-100% (optional)
         window_open: Window open detection (optional)
     """
     
-    mode: Literal["off", "heat", "auto"] = Field(
+    mode: Literal["off", "heat", "auto"] | None = Field(
-        ...,
+        None,
-        description="Operating mode of the thermostat"
+        description="Operating mode of the thermostat (optional for SET commands)"
     )
     
     target: float | Decimal = Field(