meterbusclient is working, SND_NKE will be answered

Config.cpp

@@ -102,20 +102,22 @@ void Config::setUChar(int pos, unsigned char value) {
 
 
 void Config::initialize() {
-  if (! Config::isInitialized()) {
+  if (! isInitialized()) {
     Serial.println(getResource(CONFIG_INIT_KEY));
-    Config::setFloat(Config::THERMOMETER_ALPHA, 1.0);
+    setFloat(THERMOMETER_ALPHA, 1.0);
-    Config::setULong(Config::THERMOMETER_PERIOD, 1000);
+    setULong(THERMOMETER_PERIOD, 1000);
     for (int i = 0; i < 4; i++) {
-      Config::setFloat(Config::THERMOMETER_CAL[i], 1.0);
+      setFloat(THERMOMETER_CAL[i], 1.0);
     }
-    Config::setBool(Config::THERMOMETER_DEBUG, true);
+    setBool(THERMOMETER_DEBUG, false);
-    Config::setBool(Config::THERMOMETER_INFO, true);
+    setBool(THERMOMETER_INFO, false);
 
 
-    Config::setUChar(Config::METERBUSCLIENT_ADDRESS, 0);
+    setUChar(METERBUSCLIENT_ADDRESS, 0);
+    setBool(METERBUSCLIENT_DEBUG, false);
+    setBool(METERBUSCLIENT_INFO, false);
 
-    Config::setMagic();
+    setMagic();
   }
 }
 

Config.h

@@ -55,6 +55,9 @@ namespace Config {
   const int THERMOMETER_DEBUG = 28;  // 1
   const int THERMOMETER_INFO = 29;   // 1
   const int METERBUSCLIENT_ADDRESS = 30; // 1
+  const int METERBUSCLIENT_DEBUG = 31; // 1
+  const int METERBUSCLIENT_INFO = 32; // 1
+
 
 
   bool getBool(int pos);

Resources.cpp

@@ -12,6 +12,78 @@
 
 //String TEXT;
 
+const String TEXT_RESOURCES[] = {
+    "Text1",
+    "PeriodMeasure (ms): ",
+    "Alpha:              ",
+    "Calibration:        ",
+    "Info:               ",
+    "Debug:              ",
+    "COMPILE_TIME_DEBUG: ",
+    "TimeOuts:    ",
+    "Cycles:      ",
+    "Period (ms): ",
+    "Alpha:       ",
+    "index: ",
+    "cal: ",
+    "t: ",
+    "ts: ",
+    ", ",
+    "  enable :           enable the calibration mode",
+    "  disable :          disable the calibration mode",
+    "  show :             show parameters for calibration process",
+    "  r :                set value of calibration resistor",
+    "  start <0..3>:      start calibration on channel",
+    "  stop <0..3>:       stop calibration on channel",
+    "  enabled :          ",
+    "  r_cal :            ",
+    "setTemperature: i=",
+    "t=",
+    "t_smoothed=",
+    "CONF: ",
+    "MODE: ",
+    "Initializing EEPROM",
+    "State 0",
+    "Switching to State 1",
+    "Switching to State 10",
+    "State 9",
+    "Timeout: ",
+    "State 10",
+    "No, no, we are in calibration high mode, so directly switch to state 20",
+    "Switching to state 11",
+    "r_avg on channel ",
+    "calibration factor: ",
+    "Calibration stopped",
+    "Save calibration factor for channel ",
+    ": ",
+    "HELP   List this help for all commands",
+    "command not found",
+    "Thermometer configuration operations",
+    "Show thermometer measurement values",
+    "Thermometer calibration operations",
+    "No, no, we are in calibration zero mode, so directly switch to state 20",
+    "MeterBus Client Configuration",
+    "Invalid frame",
+    "No valid frame available",
+    "Invalid checksum",
+    "Not for me but for ",
+    "Unhandled frame",
+    "s:  ",
+    "l:  ",
+    "c:  ",
+    "a:  ",
+    "ci: ",
+    "u:  ",
+    " ",
+    "frames:           ",
+    "my frames:        ",
+    "invalid frames:   ",
+    "invalid checksum: ",
+    "mbus address:     ",
+
+};
+
+
 
 const String& getResource(uint8_t key) {
   //TEXT = String("T") + key + String(": ");

Resources.h

@@ -62,62 +62,23 @@ const uint8_t THERMVALUES_HELP_KEY = 46;
 const uint8_t THERMCALIBRATE_HELP_KEY = 47;
 const uint8_t CALIBRATION_ZEOR_MODE_HINT_KEY = 48;
 const uint8_t MBC_CONFIG_HELP_KEY = 49;
-
+const uint8_t MBC_INVALID_FRAME_KEY = 50;
-
+const uint8_t MBC_NO_VALID_FRAME_KEY = 51;
-const String TEXT_RESOURCES[] = {
+const uint8_t MBC_INVALID_CHECKSUM_KEY = 52;
-    "Text1",
+const uint8_t MBC_NOT_FOR_ME_KEY = 53;
-    "PeriodMeasure (ms): ",
+const uint8_t MBC_UNHANDLED_FRAME_KEY = 54;
-    "Alpha:              ",
+const uint8_t MBC_START_DELIMITER_KEY = 55;
-    "Calibration:        ",
+const uint8_t MBC_LENGTH_KEY = 56;
-    "Info:               ",
+const uint8_t MBC_CFIELD_KEY = 57;
-    "Debug:              ",
+const uint8_t MBC_ADDRESS_KEY = 58;
-    "COMPILE_TIME_DEBUG: ",
+const uint8_t MBC_CIFIELD_KEY = 59;
-    "TimeOuts:    ",
+const uint8_t MBC_USERDATA_KEY = 60;
-    "Cycles:      ",
+const uint8_t SPACE_KEY = 61;
-    "Period (ms): ",
+const uint8_t MBC_FRAMES_KEY = 62;
-    "Alpha:       ",
+const uint8_t MBC_MYFRAMES_KEY = 63;
-    "index: ",
+const uint8_t MBC_INVALID_FRAMES_KEY = 64;
-    "cal: ",
+const uint8_t MBC_INVALID_CHECKSUM_CNT_KEY = 65;
-    "t: ",
+const uint8_t MBC_ADDRESS_LONG_KEY = 66;
-    "ts: ",
-    ", ",
-    "  enable :           enable the calibration mode",
-    "  disable :          disable the calibration mode",
-    "  show :             show parameters for calibration process",
-    "  r :                set value of calibration resistor",
-    "  start <0..3>:      start calibration on channel",
-    "  stop <0..3>:       stop calibration on channel",
-    "  enabled :          ",
-    "  r_cal :            ",
-    "setTemperature: i=",
-    "t=",
-    "t_smoothed=",
-    "CONF: ",
-    "MODE: ",
-    "Initializing EEPROM",
-    "State 0",
-    "Switching to State 1",
-    "Switching to State 10",
-    "State 9",
-    "Timeout: ",
-    "State 10",
-    "No, no, we are in calibration high mode, so directly switch to state 20",
-    "Switching to state 11",
-    "r_avg on channel ",
-    "calibration factor: ",
-    "Calibration stopped",
-    "Save calibration factor for channel ",
-    ": ",
-    "HELP   List this help for all commands",
-    "command not found",
-    "Thermometer configuration operations",
-    "Show thermometer measurement values",
-    "Thermometer calibration operations",
-    "No, no, we are in calibration zero mode, so directly switch to state 20",
-    "MeterBus Client Configuration",
-
-};
-
 
 
 const String& getResource(uint8_t key);

ThermometerPro.cpp

@@ -5,33 +5,29 @@
 #include "thermometer.h"
 #include "Config.h"
 #include "spi.h"
+#include "meterBusClient.h"
 
 
-#define ENABLE_CONFIGURATION_INVALID_CMD 1
-
 
 static CmdServer cmdServer(&Serial);
-#ifdef ENABLE_CONFIGURATION_INVALID_CMD
+static ConfigInvalidateCmd configInvalidateCmd;
-  static ConfigInvalidateCmd configInvalidateCmd;
-#endif
 static Uptime uptime;
 static Thermometer thermometer;
-
+static MeterBusClient meterBusClient;
 
 void setup() {
   Serial.begin(9600);
 
-
   Config::initialize();
 
+
   spiInit();
 
   cmdServer.begin();
-#ifdef ENABLE_CONFIGURATION_INVALID_CMD
   configInvalidateCmd.registerYourself(&cmdServer);
-#endif
   uptime.begin(&cmdServer);
   thermometer.begin(&cmdServer);
+  meterBusClient.begin(&cmdServer, &thermometer);
 }
 
 
@@ -39,4 +35,5 @@ void loop() {
   cmdServer.exec();
   uptime.exec();
   thermometer.exec();
+  meterBusClient.exec();
 }

fatal.cpp

@@ -1,10 +1,11 @@
-#include <avr/interrupt.h>
 #include"fatal.h"
 
+#include <Arduino.h>
 
 void fatal(uint8_t code) {
   // cli();
   // do something with the code and somehow show that there is a problem
+  Serial.print("Fatal: "); Serial.println(code);
   while (1);
 }
 

meterBusClient.cpp

@@ -5,20 +5,65 @@
  *      Author: wn
  */
 
+
+
 #include "meterBusClient.h"
 
 
-MeterBusClient::MeterBusClient() : m_address(0) {
+const bool MBC_COMPILE_TIME_DEBUG = false;
+
+
+String MeterBusClientConfig::exec(String params) {
+  String res = "done";
+
+  int space = params.indexOf(' ');
+  String p1 = "";
+  char pb1[128];
+  if (space != -1) {
+    params.toCharArray(pb1, 128, space+1);
+  }
+
+  if (params.startsWith("a ") && (space != -1)) {
+    unsigned int a = atoi(pb1);
+    m_meterBusClient->setAddress(a);
+  } else if (params.startsWith("debug ") && (space != -1)) {
+    bool b = (strcmp(pb1, "on") == 0);
+    m_meterBusClient->setDebug(b);
+  } else if (params.startsWith("info ") && (space != -1)) {
+    bool b = (strcmp(pb1, "on") == 0);
+    m_meterBusClient->setInfo(b);
+  } else if (params.startsWith("show")) {
+    Serial.print(getResource(MBC_FRAMES_KEY)); Serial.print(m_meterBusClient->m_frameCnt); Serial.println();
+    Serial.print(getResource(MBC_MYFRAMES_KEY)); Serial.print(m_meterBusClient->m_myFrameCnt); Serial.println();
+    Serial.print(getResource(MBC_INVALID_FRAMES_KEY)); Serial.print(m_meterBusClient->m_invalidFrameCnt); Serial.println();
+    Serial.print(getResource(MBC_INVALID_CHECKSUM_CNT_KEY)); Serial.print(m_meterBusClient->m_invalidChecksum); Serial.println();
+    Serial.print(getResource(MBC_ADDRESS_LONG_KEY)); Serial.print(m_meterBusClient->getAddress()); Serial.println();
+  } else {
+    res = "subcommand not found";
+  }
+  return res;
+}
+
+
+
+
+
+MeterBusClient::MeterBusClient() : m_meterBusClientConfig(this), m_address(0),
+    m_frameCnt(0), m_myFrameCnt(0), m_invalidFrameCnt(0), m_invalidChecksum(0) {
 
 }
 
 
 
-void MeterBusClient::begin(CmdServer *cmdServer) {
+void MeterBusClient::begin(CmdServer *cmdServer, Thermometer *thermometer) {
+  m_meterBusClientConfig.registerYourself(cmdServer);
+  m_thermometer = thermometer;
+
   Serial3.begin(1200);
 
 
   setAddress(Config::getUChar(Config::METERBUSCLIENT_ADDRESS));
+
 }
 
 void MeterBusClient::setAddress(unsigned char a) {
@@ -30,6 +75,24 @@ unsigned char MeterBusClient::getAddress() {
   return m_address;
 }
 
+void MeterBusClient::setDebug(bool b) {
+  Config::setBool(Config::METERBUSCLIENT_DEBUG, b);
+  m_debug = b;
+}
+
+bool MeterBusClient::getDebug() {
+  return m_debug;
+}
+
+void MeterBusClient::setInfo(bool b) {
+  Config::setBool(Config::METERBUSCLIENT_INFO, b);
+  m_info = b;
+}
+
+bool MeterBusClient::getInfo() {
+  return m_info;
+}
+
 
 
 /*
@@ -44,7 +107,7 @@ unsigned char MeterBusClient::getAddress() {
  *
  * Control Frame:
  *   Start      68h
- *   Length
+ *   Length     = 3
  *   Length
  *   Start      68h
  *   C-Field
@@ -74,24 +137,197 @@ unsigned char MeterBusClient::getAddress() {
  */
 
 
-void MeterBusClient::exec() {
+bool isChecksumValid(MeterBusFrame frame) {
-  static uint8_t state = 0;
+  unsigned char ctrlsum = frame.aField + frame.cField + frame.ciField;
-  bool done = false;
+  for (int i = 0; i < (frame.length - 3); i++) {
-
+    ctrlsum += frame.userData[i];
-  if (Serial3.available()) {
+  }
-    int chi;
+  return (ctrlsum == frame.checksum);
-    while ((chi = Serial3.read()) != -1) {
+}
-      char ch = (char) chi;
+
-      switch (state) {
+
-      case 0:
+
-        break;
+void MeterBusClient::handleFrame() {
-      }
+  m_frameCnt++;
-
+  if (! isChecksumValid(m_frame)) {
-      if (done) {
+    Serial.println(getResource(MBC_INVALID_CHECKSUM_KEY));
-      }
+    m_invalidChecksum++;
-    }
+  } else if (m_frame.aField != getAddress()) {
+    if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(MBC_NOT_FOR_ME_KEY)); Serial.print((int)m_frame.aField, 16); Serial.println();}
+  } else {
+    m_myFrameCnt++;
+    // handle the frame
+    if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(MBC_START_DELIMITER_KEY)); Serial.println(m_frame.startDelimiter, 16);}
+    if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(MBC_LENGTH_KEY)); Serial.println(m_frame.length, 16);}
+    if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(MBC_CFIELD_KEY)); Serial.println(m_frame.cField, 16);}
+    if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(MBC_ADDRESS_KEY)); Serial.println(m_frame.aField, 16);}
+    if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(MBC_CIFIELD_KEY)); Serial.println(m_frame.ciField, 16);}
+
+    if (m_frame.length > 3) {
+      if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(MBC_USERDATA_KEY));}
+      for (unsigned char i = 0; i < (m_frame.length - 3); i++) {
+        if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(m_frame.userData[i], 16);}
+        if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.print(getResource(SPACE_KEY));}
+      }
+        if (MBC_COMPILE_TIME_DEBUG && getDebug()) { Serial.println();}
+    }
+
+
+    if (m_frame.startDelimiter == 0x10) {
+      if (m_frame.cField == 0x40)  {
+        SND_NKE();
+      } else if (m_frame.cField == 0x5b) {
+        REQ_UD2();
+      } else {
+        Serial.println(getResource(MBC_UNHANDLED_FRAME_KEY));
+      }
+    }
+  }
+}
+
+
+typedef enum {
+  STATE_START, STATE_IDLE, STATE_SHORT_FRAME, STATE_LONG_CTRL_FRAME, STATE_HANDLE, STATE_INVALID, STATE_DONE
+} e_meterBusClientState;
+
+typedef enum {
+  SUBSTATE_LENGTH, SUBSTATE_LENGTH_REPEAT, SUBSTATE_START_REPEAT, SUBSTATE_C_FIELD, SUBSTATE_A_FIELD, SUBSTATE_CI_FIELD,
+  SUBSTATE_USERDATA, SUBSTATE_CHECKSUM, SUBSTATE_STOP
+} e_meterBusClientSubState;
+
+
+void MeterBusClient::exec() {
+  static e_meterBusClientState state = STATE_IDLE;
+  static e_meterBusClientSubState subState = SUBSTATE_LENGTH;
+  static unsigned char userDataCnt = 0;
+
+  int chi = Serial3.read();
+  char ch = (char) chi;
+
+  switch (state) {
+  case STATE_START:
+    m_frame.startDelimiter = 0;
+    m_frame.length = 0;
+    m_frame.cField = 0;
+    m_frame.aField = 0;
+    m_frame.ciField = 0;
+    //memset(m_frame.userData, 0, sizeof(m_frame.userData));
+    m_frame.valid = false;
+    state = STATE_IDLE;
+    break;
+
+  case STATE_IDLE:
+    if (chi != -1) {
+      if (ch == 0x10) {
+        m_frame.startDelimiter = 0x10;
+        state = STATE_SHORT_FRAME;
+        subState = SUBSTATE_C_FIELD;
+      } else if (ch == 0x68)  {
+        m_frame.startDelimiter = 0x68;
+        state = STATE_LONG_CTRL_FRAME;
+        subState = SUBSTATE_LENGTH;
+      } else {
+        state = STATE_INVALID;
+      }
+    }
+    break;
+
+  case STATE_SHORT_FRAME:
+    if (chi != -1) {
+      if (subState == SUBSTATE_C_FIELD) {
+        m_frame.cField = ch;
+        subState = SUBSTATE_A_FIELD;
+      } else if (subState == SUBSTATE_A_FIELD) {
+        m_frame.aField = ch;
+        subState  = SUBSTATE_CHECKSUM;
+      } else if (subState == SUBSTATE_CHECKSUM) {
+        m_frame.checksum = ch;
+        subState  = SUBSTATE_STOP;
+      } else if (subState == SUBSTATE_STOP) {
+        if (ch == 0x16) {
+          m_frame.valid = true;
+          state = STATE_HANDLE;
+        } else {
+          state = STATE_INVALID;
+        }
+      }
+    }
+    break;
+
+  case STATE_LONG_CTRL_FRAME:
+    if (chi != -1) {
+      if (subState == SUBSTATE_LENGTH) {
+        m_frame.length = ch;
+        if ((m_frame.length < 3) || (m_frame.length > 252)) {
+          state = STATE_INVALID;
+        } else {
+          subState = SUBSTATE_LENGTH_REPEAT;
+        }
+      } else if (subState == SUBSTATE_LENGTH_REPEAT) {
+        if (ch == m_frame.length) {
+          subState = SUBSTATE_START_REPEAT;
+        } else {
+          state = STATE_INVALID;
+        }
+      } else if (subState == SUBSTATE_START_REPEAT) {
+        if (ch == 0x68) {
+          subState = SUBSTATE_C_FIELD;
+        } else {
+          state = STATE_INVALID;
+        }
+      } else if (subState == SUBSTATE_C_FIELD) {
+        m_frame.cField = ch;
+        subState = SUBSTATE_A_FIELD;
+      } else if (subState == SUBSTATE_A_FIELD) {
+        m_frame.aField = ch;
+        subState = SUBSTATE_CI_FIELD;
+      } else if (subState == SUBSTATE_CI_FIELD) {
+        m_frame.ciField = ch;
+        if (m_frame.length == 3) {
+          subState = SUBSTATE_CHECKSUM;
+        } else {
+          subState = SUBSTATE_USERDATA;
+          userDataCnt = 0;
+        }
+      } else if (subState == SUBSTATE_USERDATA) {
+        m_frame.userData[userDataCnt] = ch;
+        userDataCnt++;
+        if (userDataCnt >= (m_frame.length - 3)) {
+          subState = SUBSTATE_CHECKSUM;
+        }
+      } else if (subState == SUBSTATE_CHECKSUM) {
+        m_frame.checksum = ch;
+        subState = SUBSTATE_STOP;
+      } else if (subState == SUBSTATE_STOP) {
+        if (ch == 0x16) {
+          m_frame.valid = true;
+          state = STATE_HANDLE;
+        } else {
+          state = STATE_INVALID;
+        }
+      }
+    }
+    break;
+
+  case STATE_INVALID:
+    m_invalidFrameCnt++;
+    state = STATE_START;
+    break;
+
+  case STATE_HANDLE:
+    if (m_frame.valid) {
+      handleFrame();
+    } else {
+      Serial.println(getResource(MBC_NO_VALID_FRAME_KEY));
+    }
+    state = STATE_DONE;
+    break;
+
+  case STATE_DONE:
+    // may be another useful message
+    state = STATE_START;
+    break;
   }
-
 }
 
 

meterBusClient.h

@@ -9,9 +9,11 @@
 #define METERBUSCLIENT_H_
 
 
+
 #include "cmd.h"
 #include "Config.h"
 #include "Resources.h"
+#include "Thermometer.h"
 
 class MeterBusClient;
 
@@ -29,18 +31,70 @@ private:
 
 
 
+struct MeterBusFrame {
+ /*
+  * Short Frame:
+  *   Start      10h
+  *   C-Field
+  *   A-Field
+  *   Check-Sum
+  *   Stop       16h
+  *
+  * Long Frame:
+  *   Start      68h
+  *   Length
+  *   Length
+  *   Start      68h
+  *   C-Field
+  *   A-Field
+  *   CI-Field
+  *   User-Data
+  *   Check-Sum
+  *   Stop       16h
+  *
+  */
+  unsigned char startDelimiter;
+  unsigned char length;
+  unsigned char cField;
+  unsigned char aField;
+  unsigned char ciField;
+  unsigned char userData[255];
+  unsigned char checksum;
+  bool valid;
+};
+
 
 class MeterBusClient {
 public:
   MeterBusClient();
-  void begin(CmdServer *cmdServer);
+  void begin(CmdServer *cmdServer, Thermometer *thermometer);
   void exec();
   friend class MeterBusClientConfig;
 private:
+  MeterBusClientConfig m_meterBusClientConfig;
+  Thermometer *m_thermometer;
   unsigned char m_address;
   void setAddress(unsigned char address);
   unsigned char getAddress();
+  void handleFrame();
+  MeterBusFrame m_frame;
+
+  unsigned long m_frameCnt;
+  unsigned long m_myFrameCnt;
+  unsigned long m_invalidFrameCnt;
+  unsigned long m_invalidChecksum;
+
+  bool m_debug;
+  bool getDebug();
+  void setDebug(bool b);
+  bool m_info;
+  bool getInfo();
+  void setInfo(bool b);
+
+  void SND_NKE();
+  void REQ_UD2();
 };
 
 
+
 #endif /* METERBUSCLIENT_H_ */

meterBusClientFrames.cpp

@@ -0,0 +1,23 @@
+/*
+ * meterBusClientFrames.cpp
+ *
+ *  Created on: 09.03.2014
+ *      Author: wn
+ */
+
+#include "meterBusClient.h"
+
+
+void MeterBusClient::SND_NKE() {
+  Serial3.write(0xE5);
+}
+
+void MeterBusClient::REQ_UD2() {
+
+}
+
+
+
+
+
+

thermometer.cpp

@@ -374,7 +374,6 @@ void Thermometer::exec() {
     if (currentMillis >= (lastMillis + getPeriodMeasure())) {
       lastMillis = currentMillis;
       state = 0;
-      Serial3.println("Tick");
     }
     break;