deadEnd24

Config.cpp

@@ -8,6 +8,7 @@
 
 #include <EEPROM.h>
 #include "Config.h"
+#include "Resources.h"
 
 
 
@@ -83,29 +84,47 @@ void Config::setULong(int pos, unsigned long value) {
   }
 }
 
+unsigned char Config::getUChar(int pos) {
+  u_uchar u;
+  for (unsigned int i = 0; i < sizeof(unsigned char); i++) {
+    u.e[i] = EEPROM.read(pos + i);
+  }
+  return u.c;
+}
+
+void Config::setUChar(int pos, unsigned char value) {
+  u_uchar u;
+  u.c = value;
+  for (unsigned int i = 0; i < sizeof(unsigned char); i++) {
+    EEPROM.write(pos + i, u.e[i]);
+  }
+}
+
+
+void Config::initialize() {
+  if (! Config::isInitialized()) {
+    Serial.println(getResource(CONFIG_INIT_KEY));
+    Config::setFloat(Config::THERMOMETER_ALPHA, 1.0);
+    Config::setULong(Config::THERMOMETER_PERIOD, 1000);
+    for (int i = 0; i < 4; i++) {
+      Config::setFloat(Config::THERMOMETER_CAL[i], 1.0);
+    }
+    Config::setBool(Config::THERMOMETER_DEBUG, true);
+    Config::setBool(Config::THERMOMETER_INFO, true);
+
+
+    Config::setUChar(Config::METERBUSCLIENT_ADDRESS, 0);
+
+    Config::setMagic();
+  }
+}
+
+
 bool Config::isInitialized() {
   unsigned int magic = getUInt(MAGIC);
   return magic == MAGIC_TOKEN;
 }
 
-void Config::initialize() {
-  if (! isInitialized()) {
-    //Serial.println(getResource(CONFIG_INIT_KEY));
-    setFloat(THERMOMETER_ALPHA, 1.0);
-    setULong(THERMOMETER_PERIOD, 1000);
-    for (int i = 0; i < 4; i++) {
-      setFloat(THERMOMETER_CAL[i], 1.0);
-    }
-    setBool(THERMOMETER_DEBUG, true);
-    setBool(THERMOMETER_INFO, true);
-
-
-    //Config::setUChar(Config::METERBUSCLIENT_ADDRESS, 0);
-
-    setMagic();
-  }
-}
-
 void Config::setMagic() {
   setUInt(MAGIC, MAGIC_TOKEN);
 }

Config.h

@@ -39,6 +39,11 @@ typedef union {
   uint8_t e[sizeof(bool)];
 } u_bool;
 
+typedef union {
+  unsigned char c;
+  uint8_t e[sizeof(unsigned char)];
+} u_uchar;
+
 
 namespace Config {
   const unsigned int MAGIC_TOKEN = 0xDEADBEEF;
@@ -51,6 +56,7 @@ namespace Config {
   const int THERMOMETER_INFO = 29;   // 1
   const int METERBUSCLIENT_ADDRESS = 30; // 1
 
+
   bool getBool(int pos);
   void setBool(int pos, bool value);
   float getFloat(int pos);
@@ -59,10 +65,11 @@ namespace Config {
   void setUInt(int pos, unsigned int value);
   unsigned long getULong(int pos);
   void setULong(int pos, unsigned long value);
+  unsigned char getUChar(int pos);
+  void setUChar(int pos, unsigned char value);
 
   void initialize();
 
-
   bool isInitialized();
 
   void setMagic();

Resources.cpp

@@ -12,62 +12,6 @@
 
 //String TEXT;
 
-const String TEXT_RESOURCES[] = {
-    "Text1",
-    "PeriodMeasure (ms): ",
-    "Alpha:              ",
-    "Calibration:        ",
-    "Info:               ",
-    "Debug:              ",
-    "COMPILE_TIME_DEBUG: ",
-    "TimeOuts:    ",
-    "Cycles:      ",
-    "Period (ms): ",
-    "Alpha:       ",
-    "index: ",
-    "cal: ",
-    "t: ",
-    "ts: ",
-    ", ",
-    "  enable :           enable the calibration mode",
-    "  disable :          disable the calibration mode",
-    "  show :             show parameters for calibration process",
-    "  r :                set value of calibration resistor",
-    "  start <0..3>:      start calibration on channel",
-    "  stop <0..3>:       stop calibration on channel",
-    "  enabled :          ",
-    "  r_cal :            ",
-    "setTemperature: i=",
-    "t=",
-    "t_smoothed=",
-    "CONF: ",
-    "MODE: ",
-    "Initializing EEPROM",
-    "State 0",
-    "Switching to State 1",
-    "Switching to State 10",
-    "State 9",
-    "Timeout: ",
-    "State 10",
-    "No, no, we are in calibration high mode, so directly switch to state 20",
-    "Switching to state 11",
-    "r_avg on channel ",
-    "calibration factor: ",
-    "Calibration stopped",
-    "Save calibration factor for channel ",
-    ": ",
-    "HELP   List this help for all commands",
-    "command not found",
-    "Thermometer configuration operations",
-    "Show thermometer measurement values",
-    "Thermometer calibration operations",
-    "No, no, we are in calibration zero mode, so directly switch to state 20",
-    "MeterBus Client Configuration",
-
-};
-
-
-
 
 const String& getResource(uint8_t key) {
   //TEXT = String("T") + key + String(": ");

Resources.h

@@ -41,7 +41,7 @@ const uint8_t SET_TEMPERATURE_DEBUG_2_KEY = 25;
 const uint8_t SET_TEMPERATURE_DEBUG_3_KEY = 26;
 const uint8_t CONF_COLON_KEY = 27;
 const uint8_t MODE_COLON_KEY = 28;
-const uint8_t THERMOMETER_BEGIN_1_KEY = 29;
+const uint8_t CONFIG_INIT_KEY = 29;
 const uint8_t STATE_0_KEY = 30;
 const uint8_t TO_STATE_1_KEY = 31;
 const uint8_t TO_STATE_10_KEY = 32;
@@ -64,6 +64,60 @@ const uint8_t CALIBRATION_ZEOR_MODE_HINT_KEY = 48;
 const uint8_t MBC_CONFIG_HELP_KEY = 49;
 
 
+const String TEXT_RESOURCES[] = {
+    "Text1",
+    "PeriodMeasure (ms): ",
+    "Alpha:              ",
+    "Calibration:        ",
+    "Info:               ",
+    "Debug:              ",
+    "COMPILE_TIME_DEBUG: ",
+    "TimeOuts:    ",
+    "Cycles:      ",
+    "Period (ms): ",
+    "Alpha:       ",
+    "index: ",
+    "cal: ",
+    "t: ",
+    "ts: ",
+    ", ",
+    "  enable :           enable the calibration mode",
+    "  disable :          disable the calibration mode",
+    "  show :             show parameters for calibration process",
+    "  r :                set value of calibration resistor",
+    "  start <0..3>:      start calibration on channel",
+    "  stop <0..3>:       stop calibration on channel",
+    "  enabled :          ",
+    "  r_cal :            ",
+    "setTemperature: i=",
+    "t=",
+    "t_smoothed=",
+    "CONF: ",
+    "MODE: ",
+    "Initializing EEPROM",
+    "State 0",
+    "Switching to State 1",
+    "Switching to State 10",
+    "State 9",
+    "Timeout: ",
+    "State 10",
+    "No, no, we are in calibration high mode, so directly switch to state 20",
+    "Switching to state 11",
+    "r_avg on channel ",
+    "calibration factor: ",
+    "Calibration stopped",
+    "Save calibration factor for channel ",
+    ": ",
+    "HELP   List this help for all commands",
+    "command not found",
+    "Thermometer configuration operations",
+    "Show thermometer measurement values",
+    "Thermometer calibration operations",
+    "No, no, we are in calibration zero mode, so directly switch to state 20",
+    "MeterBus Client Configuration",
+
+};
+
 
 
 const String& getResource(uint8_t key);

ThermometerPro.cpp

@@ -7,37 +7,39 @@
 #include "spi.h"
 
 
-// #define ENABLE_CONFIGURATION_INVALID_CMD 1
+#define ENABLE_CONFIGURATION_INVALID_CMD 1
 
 
-static CmdServer cmdServer(&Serial);
+//static CmdServer cmdServer(&Serial);
 #ifdef ENABLE_CONFIGURATION_INVALID_CMD
-  static ConfigInvalidateCmd configInvalidateCmd;
+//  static ConfigInvalidateCmd configInvalidateCmd;
 #endif
-static Uptime uptime;
-static Thermometer thermometer;
+//static Uptime uptime;
+//static Thermometer thermometer;
 
 
 void setup() {
   Serial.begin(9600);
 
 
-  Config::initialize();
+  //Config::initialize();
 
+  //spiInit();
 
-  spiInit();
-
-  cmdServer.begin();
+  //cmdServer.begin();
 #ifdef ENABLE_CONFIGURATION_INVALID_CMD
-  configInvalidateCmd.registerYourself(&cmdServer);
+  //configInvalidateCmd.registerYourself(&cmdServer);
 #endif
-  uptime.begin(&cmdServer);
-  thermometer.begin(&cmdServer);
+  //uptime.begin(&cmdServer);
+  //thermometer.begin(&cmdServer);
 }
 
 
 void loop() {
-  cmdServer.exec();
-  uptime.exec();
-  thermometer.exec();
+  //cmdServer.exec();
+  //uptime.exec();
+  //thermometer.exec();
+
+  Serial.println("Tick");
+  delay(1000);
 }

meterBusClient.cpp-disabled

@@ -1,11 +1,11 @@
 /*
- * MeterBusClient.cpp
+ * meterBusClient.cpp
  *
  *  Created on: 08.03.2014
  *      Author: wn
  */
 
-#include "MeterBusClient.h"
+#include "meterBusClient.h"
 
 
 MeterBusClient::MeterBusClient() : m_address(0) {
@@ -18,11 +18,11 @@ void MeterBusClient::begin(CmdServer *cmdServer) {
   Serial3.begin(1200);
 
 
-  //setAddress(Config::getUChar(Config::METERBUSCLIENT_ADDRESS));
+  setAddress(Config::getUChar(Config::METERBUSCLIENT_ADDRESS));
 }
 
 void MeterBusClient::setAddress(unsigned char a) {
-  //Config::setUChar(Config::METERBUSCLIENT_ADDRESS, a);
+  Config::setUChar(Config::METERBUSCLIENT_ADDRESS, a);
   m_address = a;
 }
 

meterBusClient.h-disabled

@@ -1,5 +1,5 @@
 /*
- * MeterBusClient.h
+ * meterBusClient.h
  *
  *  Created on: 08.03.2014
  *      Author: wn
@@ -8,11 +8,11 @@
 #ifndef METERBUSCLIENT_H_
 #define METERBUSCLIENT_H_
 
+
 #include "cmd.h"
 #include "Config.h"
 #include "Resources.h"
 
-
 class MeterBusClient;
 
 
@@ -43,5 +43,4 @@ private:
 };
 
 
-
 #endif /* METERBUSCLIENT_H_ */

thermometer.cpp

@@ -252,19 +252,7 @@ void Thermometer::begin(CmdServer *cmdServer) {
   AD7190_Calibrate(AD7190_MODE_CAL_INT_ZERO, AD7190_CH_AIN1P_AINCOM);
   AD7190_Calibrate(AD7190_MODE_CAL_INT_FULL, AD7190_CH_AIN1P_AINCOM);
 
-/*
-  if (! Config::isInitialized()) {
-    Serial.println(getResource(THERMOMETER_BEGIN_1_KEY));
-    Config::setFloat(Config::THERMOMETER_ALPHA, 1.0);
-    Config::setULong(Config::THERMOMETER_PERIOD, 1000);
-    for (int i = 0; i < 4; i++) {
-      Config::setFloat(Config::THERMOMETER_CAL[i], 1.0);
-    }
-    Config::setBool(Config::THERMOMETER_DEBUG, true);
-    Config::setBool(Config::THERMOMETER_INFO, true);
-    Config::setMagic();
-  }
-*/
+
 
   setAlpha(Config::getFloat(Config::THERMOMETER_ALPHA));
   setPeriodMeasure(Config::getULong(Config::THERMOMETER_PERIOD));
@@ -274,12 +262,7 @@ void Thermometer::begin(CmdServer *cmdServer) {
   setDebug(Config::getBool(Config::THERMOMETER_DEBUG));
   setInfo(Config::getBool(Config::THERMOMETER_INFO));
 
-  //setCalibrateFactor(0, 1.002999);
-  //setCalibrateFactor(1, 1.001804);
-  //setCalibrateFactor(2, 1.000794);
-  //setCalibrateFactor(3, 1.001071);
 
-  // prepare
   prepareAdc();
 }
 
@@ -391,6 +374,7 @@ void Thermometer::exec() {
     if (currentMillis >= (lastMillis + getPeriodMeasure())) {
       lastMillis = currentMillis;
       state = 0;
+      Serial3.println("Tick");
     }
     break;