adjusted, but too few SPIs

cube/Core/Inc/main.h

@@ -58,6 +58,41 @@ void Error_Handler(void);
 /* USER CODE END EFP */
 
 /* Private defines -----------------------------------------------------------*/
+#define eepromSpi hspi1
+#define displaySpi hspi2
+#define debugUart huart1
+#define LED_Red_Pin GPIO_PIN_13
+#define LED_Red_GPIO_Port GPIOC
+#define LED_Green_Pin GPIO_PIN_14
+#define LED_Green_GPIO_Port GPIOC
+#define EEPROM_CS_Pin GPIO_PIN_4
+#define EEPROM_CS_GPIO_Port GPIOA
+#define EEPROM_SCK_Pin GPIO_PIN_5
+#define EEPROM_SCK_GPIO_Port GPIOA
+#define EEPROM_MISO_Pin GPIO_PIN_6
+#define EEPROM_MISO_GPIO_Port GPIOA
+#define EEPROM_MOSI_Pin GPIO_PIN_7
+#define EEPROM_MOSI_GPIO_Port GPIOA
+#define Display_RES_Pin GPIO_PIN_10
+#define Display_RES_GPIO_Port GPIOB
+#define Display_DC_Pin GPIO_PIN_11
+#define Display_DC_GPIO_Port GPIOB
+#define Display_CS_Pin GPIO_PIN_12
+#define Display_CS_GPIO_Port GPIOB
+#define Display_SCK_Pin GPIO_PIN_13
+#define Display_SCK_GPIO_Port GPIOB
+#define Display_MISO_Pin GPIO_PIN_14
+#define Display_MISO_GPIO_Port GPIOB
+#define Display_MOSI_Pin GPIO_PIN_15
+#define Display_MOSI_GPIO_Port GPIOB
+#define Debug_TX_Pin GPIO_PIN_9
+#define Debug_TX_GPIO_Port GPIOA
+#define Debug_RX_Pin GPIO_PIN_10
+#define Debug_RX_GPIO_Port GPIOA
+#define Debug_Signal_2_Pin GPIO_PIN_5
+#define Debug_Signal_2_GPIO_Port GPIOB
+#define Debug_Signal_1_Pin GPIO_PIN_6
+#define Debug_Signal_1_GPIO_Port GPIOB
 /* USER CODE BEGIN Private defines */
 
 /* USER CODE END Private defines */

cube/Core/Inc/spi.h

@@ -0,0 +1,60 @@
+/**
+  ******************************************************************************
+  * File Name          : SPI.h
+  * Description        : This file provides code for the configuration
+  *                      of the SPI instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __spi_H
+#define __spi_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern SPI_HandleTypeDef hspi1;
+extern SPI_HandleTypeDef hspi2;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_SPI1_Init(void);
+void MX_SPI2_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ spi_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

cube/Core/Inc/stm32f1xx_hal_conf.h

@@ -61,10 +61,10 @@
 /*#define HAL_MMC_MODULE_ENABLED   */
 /*#define HAL_SDRAM_MODULE_ENABLED   */
 /*#define HAL_SMARTCARD_MODULE_ENABLED   */
-/*#define HAL_SPI_MODULE_ENABLED   */
+#define HAL_SPI_MODULE_ENABLED
 /*#define HAL_SRAM_MODULE_ENABLED   */
-/*#define HAL_TIM_MODULE_ENABLED   */
-/*#define HAL_UART_MODULE_ENABLED   */
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
 /*#define HAL_USART_MODULE_ENABLED   */
 /*#define HAL_WWDG_MODULE_ENABLED   */
 

cube/Core/Inc/stm32f1xx_it.h

@@ -56,6 +56,8 @@ void SVC_Handler(void);
 void DebugMon_Handler(void);
 void PendSV_Handler(void);
 void SysTick_Handler(void);
+void SPI1_IRQHandler(void);
+void USART1_IRQHandler(void);
 /* USER CODE BEGIN EFP */
 
 /* USER CODE END EFP */

cube/Core/Inc/tim.h

@@ -0,0 +1,58 @@
+/**
+  ******************************************************************************
+  * File Name          : TIM.h
+  * Description        : This file provides code for the configuration
+  *                      of the TIM instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __tim_H
+#define __tim_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern TIM_HandleTypeDef htim1;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_TIM1_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ tim_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

cube/Core/Inc/usart.h

@@ -0,0 +1,58 @@
+/**
+  ******************************************************************************
+  * File Name          : USART.h
+  * Description        : This file provides code for the configuration
+  *                      of the USART instances.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __usart_H
+#define __usart_H
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+extern UART_HandleTypeDef huart1;
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+void MX_USART1_UART_Init(void);
+
+/* USER CODE BEGIN Prototypes */
+
+/* USER CODE END Prototypes */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__ usart_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/