mainscnt/mains-frequency-counter-stm32
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

disable modem stuff in master branch

Browse Source
This commit is contained in:
Wolfgang Hottgenroth
2021-02-27 12:50:17 +01:00
parent 24a37e9e5f
commit 3f024510ae
10 changed files with 27 additions and 158 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
cube/Core/Src/gpio.c
View File

@ -52,7 +52,7 @@ void MX_GPIO_Init(void)
HAL_GPIO_WritePin(GPIOC, LED_Red_Pin|LED_Green_Pin|LED_Blue_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOA, MODEM_RES_Pin|EEPROM_CS_Pin, GPIO_PIN_RESET);
HAL_GPIO_WritePin(EEPROM_CS_GPIO_Port, EEPROM_CS_Pin, GPIO_PIN_RESET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, ETHER_RES_Pin|ETHER_CS_Pin|Debug_Signal_2_Pin|Debug_Signal_1_Pin, GPIO_PIN_RESET);
@ -64,12 +64,12 @@ void MX_GPIO_Init(void)
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/*Configure GPIO pins : PAPin PAPin */
GPIO_InitStruct.Pin = MODEM_RES_Pin|EEPROM_CS_Pin;
/*Configure GPIO pin : PtPin */
GPIO_InitStruct.Pin = EEPROM_CS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
HAL_GPIO_Init(EEPROM_CS_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pin : PtPin */
GPIO_InitStruct.Pin = ADMIN_MODE_Pin;

1
cube/Core/Src/main.c
View File

@ -99,7 +99,6 @@ int main(void)
MX_TIM1_Init();
MX_USART1_UART_Init();
MX_IWDG_Init();
MX_USART2_UART_Init();
/* USER CODE BEGIN 2 */
my_setup_2();

1
cube/Core/Src/main.c-bak
View File

@ -94,7 +94,6 @@ int main(void)
MX_TIM1_Init();
MX_USART1_UART_Init();
MX_IWDG_Init();
MX_USART2_UART_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */

15
cube/Core/Src/stm32f1xx_it.c
View File

@ -62,7 +62,6 @@
extern SPI_HandleTypeDef hspi1;
extern TIM_HandleTypeDef htim1;
extern UART_HandleTypeDef huart1;
extern UART_HandleTypeDef huart2;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
@ -247,20 +246,6 @@ void USART1_IRQHandler(void)
/* USER CODE END USART1_IRQn 1 */
}
/**
* @brief This function handles USART2 global interrupt.
*/
void USART2_IRQHandler(void)
{
/* USER CODE BEGIN USART2_IRQn 0 */
/* USER CODE END USART2_IRQn 0 */
HAL_UART_IRQHandler(&huart2);
/* USER CODE BEGIN USART2_IRQn 1 */
/* USER CODE END USART2_IRQn 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

15
cube/Core/Src/stm32f1xx_it.c-bak
View File

@ -59,7 +59,6 @@
extern SPI_HandleTypeDef hspi1;
extern TIM_HandleTypeDef htim1;
extern UART_HandleTypeDef huart1;
extern UART_HandleTypeDef huart2;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
@ -242,20 +241,6 @@ void USART1_IRQHandler(void)
/* USER CODE END USART1_IRQn 1 */
}
/**
* @brief This function handles USART2 global interrupt.
*/
void USART2_IRQHandler(void)
{
/* USER CODE BEGIN USART2_IRQn 0 */
/* USER CODE END USART2_IRQn 0 */
HAL_UART_IRQHandler(&huart2);
/* USER CODE BEGIN USART2_IRQn 1 */
/* USER CODE END USART2_IRQn 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */

70
cube/Core/Src/usart.c
View File

@ -25,7 +25,6 @@
/* USER CODE END 0 */
UART_HandleTypeDef huart1;
UART_HandleTypeDef huart2;
/* USART1 init function */
@ -45,25 +44,6 @@ void MX_USART1_UART_Init(void)
Error_Handler();
}
}
/* USART2 init function */
void MX_USART2_UART_Init(void)
{
huart2.Instance = USART2;
huart2.Init.BaudRate = 115200;
huart2.Init.WordLength = UART_WORDLENGTH_8B;
huart2.Init.StopBits = UART_STOPBITS_1;
huart2.Init.Parity = UART_PARITY_NONE;
huart2.Init.Mode = UART_MODE_TX_RX;
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
if (HAL_UART_Init(&huart2) != HAL_OK)
{
Error_Handler();
}
}
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
@ -100,36 +80,6 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
/* USER CODE END USART1_MspInit 1 */
}
else if(uartHandle->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspInit 0 */
/* USER CODE END USART2_MspInit 0 */
/* USART2 clock enable */
__HAL_RCC_USART2_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USART2 GPIO Configuration
PA2 ------> USART2_TX
PA3 ------> USART2_RX
*/
GPIO_InitStruct.Pin = MODEM_TX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(MODEM_TX_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = MODEM_RX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(MODEM_RX_GPIO_Port, &GPIO_InitStruct);
/* USART2 interrupt Init */
HAL_NVIC_SetPriority(USART2_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART2_IRQn);
/* USER CODE BEGIN USART2_MspInit 1 */
/* USER CODE END USART2_MspInit 1 */
}
}
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
@ -155,26 +105,6 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
/* USER CODE END USART1_MspDeInit 1 */
}
else if(uartHandle->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspDeInit 0 */
/* USER CODE END USART2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART2_CLK_DISABLE();
/**USART2 GPIO Configuration
PA2 ------> USART2_TX
PA3 ------> USART2_RX
*/
HAL_GPIO_DeInit(GPIOA, MODEM_TX_Pin|MODEM_RX_Pin);
/* USART2 interrupt Deinit */
HAL_NVIC_DisableIRQ(USART2_IRQn);
/* USER CODE BEGIN USART2_MspDeInit 1 */
/* USER CODE END USART2_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */